Previous Page
Page:  / 2
Author
Message
LastManStanding1911
Offline
Posts: 35
Feedback: 0% (0)
Posted: 10/5/2013 10:00:27 AM EST
OK I wanted one of the Sig 556 Pistols with "stabilizing brace" but then I see this !!

Zastava PAP M92 PV Pistol w/ Krinkov Style Muzzle Brake & SB-47 Stabilizing Arm Brace

This M92 PV Pistol comes equipped with the sleek Krinkov style muzzle extension and the SB-47 Stabilizing Brace. The SB-47 brace is an awesome invention that secures AK style pistols to the forearm of the shooter and assists in firing the pistol the way it is intended with one hand! This AK style pistol is a brand new firearm made by the famous Zastava factory in Serbia. Comes stock with a dimpled receiver, hinged top cover, chrome bolt, krink-style rear sight, dual aperture front sight, and a bolt hold-open notch on the selector.- Comes with two 30 rd. mags and type may vary .

Action: Semi-Auto
Caliber: 7.62x39mm
Capacity: 30 rds.
Barrel: 10"
Overall: 21.75"
Weight: 6.9 lbs.


Video Below

http://www.youtube.com/watch?v=zutdKXT9giI

Any Help with getting the Video to Embed ?? I tried like six different codes as well as the one offered here on the site with no luck.

ATLANTIC-FIREARMS
Member
Offline
Posts: 3138
Feedback: 100% (26)
Link To This Post
Posted: 10/5/2013 10:19:59 AM EST
Atlantic Firearms.com
www.atlanticfirearms.com
sales@atlanticfirearms.com
MAKAK47
Offline
Posts: 2828
Feedback: 0% (0)
Link To This Post
Posted: 10/5/2013 2:42:02 PM EST
if the atf is allowing this, why don't they just go ahead and abolish the SBR law already?
Snot-Rocket
Offline
Posts: 755
Feedback: 0% (0)
Link To This Post
Posted: 10/8/2013 8:18:48 PM EST
[Last Edit: 10/10/2013 9:11:58 AM EST by Snot-Rocket]
...
BlahX3
Offline
Posts: 219
Feedback: 100% (22)
Link To This Post
Posted: 10/10/2013 12:16:02 AM EST
Who has them in stock?
ATLANTIC-FIREARMS
Member
Offline
Posts: 3150
Feedback: 100% (26)
Link To This Post
Posted: 10/10/2013 2:42:39 AM EST
We have the pistols in stock at this time
Atlantic Firearms.com
www.atlanticfirearms.com
sales@atlanticfirearms.com
BlahX3
Offline
Posts: 220
Feedback: 100% (22)
Link To This Post
Posted: 10/11/2013 8:40:13 PM EST
[Last Edit: 10/11/2013 8:40:39 PM EST by BlahX3]
I already have a M92 PAP pistol, just want the brace.
CGP2
Member
Offline
Posts: 2210
Feedback: 100% (170)
Link To This Post
Posted: 10/12/2013 7:48:44 AM EST
[Jump To Reply]Originally Posted By BlahX3:
I already have a M92 PAP pistol, just want the brace.


Free Shipping at CFS
DOG556
Offline
Posts: 958
Feedback: 100% (3)
Link To This Post
Posted: 10/26/2013 2:26:53 AM EST
Must have!!..
superdoc
Member
Online
Posts: 251
Feedback: 0% (0)
Link To This Post
Posted: 10/26/2013 2:46:21 AM EST
OOS at Centerfire. Any other leads?
19Charlie_84
Military
Offline
Posts: 1046
Feedback: 100% (53)
Link To This Post
Posted: 10/26/2013 8:45:07 PM EST
[Jump To Reply]Originally Posted By MAKAK47:
if the atf is allowing this, why don't they just go ahead and abolish the SBR law already?


$200 donations to uncle sugar.
DOG556
Offline
Posts: 963
Feedback: 100% (3)
Link To This Post
Posted: 10/28/2013 10:14:57 AM EST
Can you take a few close ups of the brace where in mates up with the back plate of the pistol. Thanks
Kjaskarr
Offline
Posts: 12
Feedback: 100% (1)
Link To This Post
Posted: 10/29/2013 12:04:31 AM EST
[Jump To Reply]Originally Posted By superdoc:
OOS at Centerfire. Any other leads?


Both Atlantic and Centerfire are out of them with no backorders, but you can still get them directly from Century I believe:
SB-47
A bit pricier at $140 though.
AlexBosco
Offline
Posts: 141
Feedback: 0% (0)
Link To This Post
Posted: 10/29/2013 8:50:15 AM EST
[Last Edit: 10/29/2013 8:50:35 AM EST by AlexBosco]
gsd2053
Offline
Posts: 1765
Feedback: 0% (0)
Link To This Post
Posted: 11/1/2013 5:50:26 PM EST
DUDE this DUDE looks TOTALY SERBIAN FREEDOM FIGHTER.

http://www.youtube.com/watch?v=zutdKXT9giI
stolenheron
Offline
Posts: 635
Feedback: 100% (25)
Link To This Post
Posted: 11/1/2013 6:05:53 PM EST
I definitely need to get a brace.
gsd2053
Offline
Posts: 1766
Feedback: 0% (0)
Link To This Post
Posted: 11/1/2013 6:09:07 PM EST
YEP I'll bet the Serbs totally scrap the actual M92 fur dis rit hisyour http://www.youtube.com/watch?v=zutdKXT9giI
. However I am glad the ATF is ready to admit that making law abiding citizens pay $200 US Dinars fur SBR status was wrong. And with the approval of the "SLIDE FIRE " stock. They are obviously admitting that it was wrong to make everyone from 1968 to present to pay $200 US Dinars to own a F/A. Not to mention they are OBVIOUSLY apologizing for ending the production of F/A in 1986. Hay at least they are willing to start working on undoing the wrongs and try to go in the right direction. Trust the Law abiding America.

[Jump To Reply]Originally Posted By gsd2053:
DUDE this DUDE looks TOTALY SERBIAN FREEDOM FIGHTER.

http://www.youtube.com/watch?v=zutdKXT9giI
Saladin2
Offline
Posts: 806
Feedback: 0% (0)
Link To This Post
Posted: 12/18/2013 9:49:36 AM EST
Does the SB-47 brace adjust for length at all? It seems awfully short.
PigBat
Member
Offline
Posts: 479
Feedback: 0% (0)
Link To This Post
Posted: 12/18/2013 11:17:19 AM EST
[Jump To Reply]Originally Posted By Saladin2:
Does the SB-47 brace adjust for length at all? It seems awfully short.


No, it has no provision for adjustment. It is quite short, about the length of an M-4 stock fully collapsed.
Essentially, it's just a rubber "stock" that slides over a plain tube and is held on only by friction. It will rotate and can be slid back with some effort, but has no way to secure it in any particular position. I suspect if it did, it would be immediately classified as a shoulder stock.

It would be nice to have a quick-detach mount; one doesn't always want the arm brace on their pistol, especially if it's going to be carried in a typical briefcase. I'm sure some enterprising, talented folks with proper tools and skill could figure out a QD bracket.
Urban_Ops
StormWerkz.com
Offline
Posts: 932
Feedback: 100% (1)
Link To This Post
Posted: 12/18/2013 12:52:09 PM EST
Would it be legal to install a folding mechanism between the brace and receiver ?
StormWerkz.com
uzigalil
Offline
Posts: 291
Feedback: 100% (6)
Link To This Post
Posted: 12/19/2013 7:59:37 PM EST
Does anyone know how to attach a sling to this pistol
Airacuda
Offline
Posts: 3
Feedback: 0% (0)
Link To This Post
Posted: 12/20/2013 3:48:14 AM EST
The tube of the brace is the exact diameter of an AR tube it just does not have the locking holes on bottom for a collapsable stock. You could add a folder and a pistol AR tube and it would fold. I don't see how the folding would matter as it is already a Pistol. I secured a sling mount to my brace at the end where it also serves to keep the brace from rotating. If you plan to use this for serious work, you will have to get a longer grip screw and also beef up the mount. As it comes the pistol grip is the only thing holding it on and can be snatched right off the back of the Pistol.
Mine is now solid enough to use as a hammer. I added a StormWerkz rail and a mini red dot. I am getting 3.5 in groups at 100 and can hit man size silhouettes at 250 yds easily. I keep the BATFE letter and pictures of the ad with me at all times. This was a suggestion from 2 of my LEO friends. They said it would save me a couple of hours sitting in jail while they confirmed my story.
it really is a paperless SBR.
djturnz
Offline
Posts: 327
Feedback: 0% (0)
Link To This Post
Posted: 12/20/2013 7:09:00 AM EST
[Last Edit: 12/20/2013 7:16:14 AM EST by djturnz]
[Jump To Reply]Originally Posted By uzigalil:
Does anyone know how to attach a sling to this pistol

echo93 and RFT make a plate that bolts between the pistol grip and the receiver with a loop out of the back for sling attachment. Temporarily, I ties a loop of 550 cord and made it stick out the back. Works just fine as long as you make sure it won't come untied, the sling should break before the 550 cord.
Urban_Ops
StormWerkz.com
Offline
Posts: 934
Feedback: 100% (1)
Link To This Post
Posted: 12/20/2013 8:55:34 AM EST
[Jump To Reply]Originally Posted By Airacuda:
The tube of the brace is the exact diameter of an AR tube it just does not have the locking holes on bottom for a collapsable stock. You could add a folder and a pistol AR tube and it would fold. I don't see how the folding would matter as it is already a Pistol. I secured a sling mount to my brace at the end where it also serves to keep the brace from rotating. If you plan to use this for serious work, you will have to get a longer grip screw and also beef up the mount. As it comes the pistol grip is the only thing holding it on and can be snatched right off the back of the Pistol.
Mine is now solid enough to use as a hammer. I added a StormWerkz rail and a mini red dot. I am getting 3.5 in groups at 100 and can hit man size silhouettes at 250 yds easily. I keep the BATFE letter and pictures of the ad with me at all times. This was a suggestion from 2 of my LEO friends. They said it would save me a couple of hours sitting in jail while they confirmed my story.
it really is a paperless SBR.


My thought on the folder was to make it more compact for storage/transport as well as adding the 3/4" additional length of the folding mechanism.

StormWerkz.com
Airacuda
Offline
Posts: 4
Feedback: 0% (0)
Link To This Post
Posted: 12/20/2013 3:23:51 PM EST
I totally understand about making it a folder. I just meant it should be no problem legally.
uzigalil
Offline
Posts: 292
Feedback: 100% (6)
Link To This Post
Posted: 12/20/2013 6:00:11 PM EST
Im aware of the sling plates that go between the grip but I dont know if those will work considering that the stock plate goes there as well.

[Jump To Reply]Originally Posted By djturnz:
Originally Posted By uzigalil:
Does anyone know how to attach a sling to this pistol

echo93 and RFT make a plate that bolts between the pistol grip and the receiver with a loop out of the back for sling attachment. Temporarily, I ties a loop of 550 cord and made it stick out the back. Works just fine as long as you make sure it won't come untied, the sling should break before the 550 cord.

  Previous Page
Page:  / 2