 hiPK 
Member
Joined: Apr 2012  OH, USA
 Posts: 6 Feedback: 0% (0) |
Posted: 5/27/2012 11:43:29 AM
THE IMAGE ABOVE IS A PAID ADVERTISEMENT |
|
|
|
|
Posted: 5/27/2012 6:43:39 PM
Those are the only 2 screws. Try a rubber mallet and hit the back of the stock on the top and bottom corner at an angle away from the receiver, alternating between top and bottom- not too hard but solid. It will come out after awhile.
|
|
|
|
|
Posted: 5/27/2012 7:11:43 PM
Thanks for the reply, I'll give that a try. They really wedge those things in there, but I guess that's a good thing!
|
|
|
|
|
Posted: 5/28/2012 8:42:10 AM
Worked like a charm, Thanks!
|
|
|
|
|
Posted: 5/28/2012 9:18:02 AM
Originally Posted By hiPK:
Worked like a charm, Thanks! NP. Happy to help. Enjoy that Maadi. |
|
|
|
|
Posted: 5/28/2012 2:56:24 PM
Originally Posted By Dferg10:
Those are the only 2 screws. Try a rubber mallet and hit the back of the stock on the top and bottom corner at an angle away from the receiver, alternating between top and bottom- not too hard but solid. It will come out after awhile. There is also a 3rd screw that goes thru the original "pistol grip" square hole. It is smaller and has a large flat washer under it. |
|
|
|
|
Posted: 5/28/2012 8:20:09 PM
[Last Edit: 5/28/2012 8:21:44 PM by Dferg10]
Originally Posted By TUBBY:
Originally Posted By Dferg10:
Those are the only 2 screws. Try a rubber mallet and hit the back of the stock on the top and bottom corner at an angle away from the receiver, alternating between top and bottom- not too hard but solid. It will come out after awhile. There is also a 3rd screw that goes thru the original "pistol grip" square hole. It is smaller and has a large flat washer under it. I see there is. I was looking at the regular wood stock that I keep in the same box. |
|
|
|
|
Posted: 5/29/2012 8:25:02 AM
Originally Posted By TUBBY:
Originally Posted By Dferg10:
Those are the only 2 screws. Try a rubber mallet and hit the back of the stock on the top and bottom corner at an angle away from the receiver, alternating between top and bottom- not too hard but solid. It will come out after awhile. There is also a 3rd screw that goes thru the original "pistol grip" square hole. It is smaller and has a large flat washer under it. Mine did have the 3rd screw with the washer. It did not have any slot for a screw diver , almost like a rounded head rivot, I could not find a way to loosen it. The couple of whacks with the rubber mallet pulled it loose with minimal damage. |
|
|
