I found out the 54R and 308 need some mods to make the hammer fit..
So I contacted Dinzag Arms for some assistance..
My factory trigger was gone for 6 days.. so he could use to make me up a TAPCO G2 to match the profile.
Heres what he sent back to me..
Factory on left.. Modified G2 on right.
Modified and slightly polished G2 on left.. factory on right.
Modified G2 on bottom.. factory on top.. notice the nice machined notch in the hammer..
He smoothed out the G2 on the surface and the release area..
Literally a drop in.. I didn't have to modify my safety lever either..
Just make sure to install the lever with the hammer DOWN so that the lever can clear..
He said he will be putting these already modified up on his
VEPR page later this week.
FCGVEP3 is the TAPCO G2 single hook and he now has the FCGVEP3DS which is an Arsenal 2 stage as well listed half way down the
FCG Page.
Breaks clean.. no grit... dry function check 100%..