 MeatAxe556 
Member
Joined: Apr 2011  USA
 Posts: 291 Feedback: 0% (0) |
Posted: 8/4/2012 4:38:12 AM
[Last Edit: 8/5/2012 4:58:38 PM by MeatAxe556]
THE IMAGE ABOVE IS A PAID ADVERTISEMENT http://www.atlanticfirearms.com/storeproduct980.aspx Trigger group: does it come with a US-made trigger group or can I replace the stock trigger group with a standard Tapco G2 FCG? Handguards: I take it that it needs a bolt on bracket to use a MI AK lower handguard. For the upper forend, can I use a standard AK gas tube on the MD2 without modification? Pistol Grip: will it take a Tapco SAW PG without modification. Thanks! |
|
|
|
|
Posted: 8/8/2012 4:20:33 PM
It already has 3 U.S. parts with he g2 trigger group installed.
You just need two more. A choate drugnov style stock, made for the stamped Chinese variant will work with a bit of fitting. Also I suggest this http://store.carolinashooterssupply.com/servlet/-strse-61/SAIGA-forearm-rifle-tri-dsh-rail/Detail You don't need any odd hand guard retainer. It should be bolt on. It's very well made. Has internal metal reinforcement. |
|
|
|
|
Posted: 8/11/2012 5:08:02 AM
[Last Edit: 8/11/2012 10:23:07 PM by MeatAxe556]
Originally Posted By mitcaj53:
It already has 3 U.S. parts with he g2 trigger group installed. You just need two more. A choate drugnov style stock, made for the stamped Chinese variant will work with a bit of fitting. Also I suggest this http://store.carolinashooterssupply.com/servlet/-strse-61/SAIGA-forearm-rifle-tri-dsh-rail/Detail You don't need any odd hand guard retainer. It should be bolt on. It's very well made. Has internal metal reinforcement. Thanks for the info! Making a list of parts now... So does the MD2 come with an axis pin retaining plate or a "shepherd's crook"? Also, is the bullet guide riveted / screwed in or is it a fixed part of the trunion? Thanks! |
|
|
|
|
Posted: 8/13/2012 3:14:29 PM
Originally Posted By MeatAxe556:
Originally Posted By mitcaj53:
It already has 3 U.S. parts with he g2 trigger group installed. You just need two more. A choate drugnov style stock, made for the stamped Chinese variant will work with a bit of fitting. Also I suggest this http://store.carolinashooterssupply.com/servlet/-strse-61/SAIGA-forearm-rifle-tri-dsh-rail/Detail You don't need any odd hand guard retainer. It should be bolt on. It's very well made. Has internal metal reinforcement. Thanks for the info! Making a list of parts now... So does the MD2 come with an axis pin retaiining plate or a "shepherd's crook"? Also, is the bullet guide riveted / screwed in or is it a fixed part of the trunion? Thanks! It comes with a retaining plate I assume is tapco. The bullet guide is screwed and then tac welded in by Atlantic's gunsmiths. I was told this job was NOT done by red jacket but in house. |
|
|
ARCHIVED
