I started a thread on this a month ago and no one answered, but here it goes: It's a waffen werks, which once seemed to be awesome and then seemed to have a lot of problems. I got mine about 3 years ago, but had not shot it a lot until recently. I average about 2 jams out of a 30 round magazine. When I pull the jammed one out, there is a dent in the top of the round that is trying to be fed, where it looks like the bolt is striking it. I have also had an empty casing wind up on the left side of the reciever a few times, and i'm not sure if it's not extracting, causing a doublefeed, or short stroking, or what. Seems to happen with red army standard ammo but across multiple magazines. when it jams, I usually have to remove the live round it is trying to feed and an empty case rattling around in the receiver, and the round that failed to feed always has an indentation in the case where the bolt impacts it. Usually, the bullet is canted a little as well from the impact. Lastly, the action just feels kind of rough to me, I only own one other AK, an old mak 90, which seems smoother but still kind of rough. It runs flawlessly though. As a final note, I was shooting some premium hornady through it because I couldn't find anything cheap, and I had one can of 7N6 I didn't want to open. I don't remember having so many issues with the hornady, which makes me wonder about short stroking again, as the horandy might have more powder to overcome the rough action? Any thoughts are appreciated.