Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel

Log In

A valid email is required.
Password is required.
Site Notices
1/14/2017 8:11:35 PM
Posted: 10/29/2011 11:26:38 AM EST
[Last Edit: 10/29/2011 12:41:18 PM EST by Verdun]
Local gun shop has a thumb hole stock Serbian AK 47 for $700. What is the quality of Serbian rifles and is that a good price ? serial # ZAPAP 100––- Any better than standard Yugo ? - Thanks for the info. Sounded high to me, but I didn't know how high. Again thinks for the help
Link Posted: 10/29/2011 11:49:03 AM EST
If it's a PAP like the pic below, it's dramatically overpriced. They normally go for $400-ish.

Link Posted: 10/29/2011 12:00:18 PM EST
IIRC that rifle only accepts 10 shot magazines and requires machine work on the trunnion to convert it to accept standard magazines.
Link Posted: 10/29/2011 12:53:10 PM EST
[Last Edit: 10/29/2011 12:53:52 PM EST by N4KVE]
Originally Posted By POLYTHENEPAM:
IIRC that rifle only accepts 10 shot magazines and requires machine work on the trunnion to convert it to accept standard magazines.
Exactly. While the Century Wasr's come into the US with a narrow magwell opening, the front trunnion is a hi cap part. These Yugo guns use a narrow opening front trunnion, which makes hogging out the opening much more labor intensive. GARY N4KVE

Link Posted: 10/29/2011 1:54:51 PM EST
Local Cabella's has a bunch of them for either $399 or $349, (can't remember which).
Link Posted: 10/30/2011 4:45:18 PM EST
Originally Posted By POLYTHENEPAM:
IIRC that rifle only accepts 10 shot magazines and requires machine work on the trunnion to convert it to accept standard magazines.


and even after all the work it probably wont feed correctly, and the buttstock cannot be changed out into a PG configuration.

I wish the serbs would make it easier to convert these rifles
Link Posted: 10/31/2011 7:03:29 AM EST
Why can't the buttstock be changed out? Is the rear trunion different than a standard one?
Link Posted: 10/31/2011 8:07:25 AM EST

Originally Posted By Rrahn3:
Why can't the buttstock be changed out? Is the rear trunion different than a standard one?

It can be changed out, a M70 butt stock will bolt right up. The slant receiver raises aesthetic issues, it really looks like ass unless something is done to accommodate the receiver slant.
Link Posted: 10/31/2011 11:22:10 AM EST
[Last Edit: 10/31/2011 11:33:35 AM EST by Killjoy321]
Originally Posted By Liquidmetal:

Originally Posted By Rrahn3:
Why can't the buttstock be changed out? Is the rear trunion different than a standard one?

It can be changed out, a M70 butt stock will bolt right up. The slant receiver raises aesthetic issues, it really looks like ass unless something is done to accommodate the receiver slant.


well I didnt know that you could put a m70 stock on it, but your right about the aesthetics it would not look right.

here is a thread that explains the conversion

http://www.akfiles.com/forums/showthread.php?t=70004

and here is one with a good stock conversion

http://www.ar15.com/forums/t_4_89/137015_Where_to_get_Synthetic_M70_Stock.html
Top Top