User Panel
User Panel
User Panel
|
Posted: 9/26/2008 10:39:21 PM EDT
[#1]
No one in Austin TX???? I know we have a bunch of damn Liberal Hippies here, but this is still a Red State!! Maybe you Dallas guys can help me out. I already have a rifle, just unbanning it. 2 rifles really. I only need to press the FSB and gas block off then new ones on.
|
|
|
|
|
Posted: 10/13/2008 12:52:05 PM EDT
[#2]
I'm in Raleigh, NC, anyone with build tools nearby?
|
|
|
|
MI, USA
|
Posted: 10/20/2008 7:43:38 PM EDT
[#3]
Hello Dest,
Rochester Hills Michigan I have an AK74 Polish Tantal 545x39 kit with a separate Bulgarian barrel assembly. I will need to swap over barrel parts, paint/coat/ powder coat/nickel coat metal parts, assemble, headspace etc. My automotive tools are extensive (no gunsmith tools) and include: heated 3 bay garage hbench sander air hammer compressor air brush, touch and full spray guns (no hplv though) sandblaster/case vise mig welder plasma cutter engine hoist etc too much too list I welcome any help in finishing my AK74 in the SE Michigan area. My parts orders should be in by Mid Nov 2008 ... |
|
|
IA, USA
|
Posted: 11/4/2008 12:21:47 AM EDT
[#4]
Hello from the Heartland - Iowa [Des Moines]
I have over 27 builds to my name. NO SCREW BUILDS HERE - all riveted - THE WAY THEY SHOULD BE! ! ! 
From Khyber Pass to Krinks, underfolders to sidefolders. I love to build these rifles. 
|
|
|
CA, USA
|
Posted: 11/7/2008 5:57:27 PM EDT
[#5]
<––––-Bay Area, California
|
|
|
NV, USA
|
Posted: 11/15/2008 9:42:22 PM EDT
[#6]
Reno, NV
|
|
|
GA, USA
|
Posted: 11/24/2008 11:36:45 PM EDT
[#7]
ATLANTA GA GEORGIA, ANY OTHER BUILDERS?
|
|
|
PA, USA
|
Posted: 12/23/2008 12:12:26 PM EDT
[#8]
Looking for assitance on a Romy build in the PITTSBURGH,PA. area??? Any assistance would be appreciated. Thank-you in advance.
|
|
|
VA, USA
|
Posted: 1/18/2009 10:28:25 AM EDT
[#9]
Sterling VA, Company machine-shop
|
|
|
OH, USA
|
Posted: 2/5/2009 6:29:26 PM EDT
[#10]
I hope I am doing this right, first time posting, replying, or whatever... will learn with time. I am trying to post to AkaTom. Tom, I know you said you sold all of your build tools, but I was wondering if maybe I could pick your brain a little bit. I live in St. Clairsville, and I am very interested in building my own AK. I have read tutorials, and I believe I have a reasonable understanding, but I always learn the most from talking to someone, face to face. Maybe I could bring a case of beer and just get some info off of you? Thanks for any reply, ahead of time.
I know there are some other builders not too far off that still have tools and the such, any reply is appreciated. I have had several specific firearm questions over the last few weeks. I have been doing some homework on a number of firearms I am interested on purchasing, and firearm coatings. Forums just like this one have been a God send, and I really value all of the helpful members out there who take time out of their day to help a fellow shooter. Thanks to everyone. |
|
|
|
Posted: 2/5/2009 7:03:18 PM EDT
[#11]
Austin / Houston area here and I would LOVE to build my Polish Tantal kit...
Have everything ready to go (922r), just need someone to show me how & who has the tools to do the job right! Texans! Shout Out Like You Have a Pair!! BIGGER_HAMMER 
|
|
|
|
AL, USA
|
Posted: 2/10/2009 6:53:38 PM EDT
[#12]
Any North AL builders?
|
|
|
AL, USA
|
Posted: 2/12/2009 9:20:16 PM EDT
[#13]
Any one in Central Ala?
|
|
|
MO, USA
|
Posted: 3/16/2009 3:48:30 AM EDT
[#14]
Anybody in the St. Louis area?
|
|
|
|
Posted: 3/16/2009 6:40:48 PM EDT
[#15]
I have a pair! Texas sized
Just not the tools to make it happen Originally Posted By Bigger_Hammer: Austin / Houston area here and I would LOVE to build my Polish Tantal kit... Have everything ready to go (922r), just need someone to show me how & who has the tools to do the job right! Texans! Shout Out Like You Have a Pair!! BIGGER_HAMMER |
|
|
|
FL, USA
|
Posted: 5/26/2009 10:08:53 PM EDT
[#16]
Pinellas, FL
Done two builds so far, Polish UF and Rommy G, both from a flat. |
|
|
NC, USA
|
Posted: 6/11/2009 11:10:41 AM EDT
[#17]
Asheville NC(Western North Carolina)
mig welder plasma cutter drill press homemade jig head space gauges bore laser |
|
|
|
Posted: 7/5/2009 1:33:41 PM EDT
[#18]
I'm in Austin, TX.... starting to find information for a build. I'd love to build an underfolder, but don't have access to any shop equipment or a welder (and don't know how to weld anyway).
|
|
|
|
TX, USA
|
Posted: 7/20/2009 6:19:55 PM EDT
[#19]
Hey guys I'm in Denton TX and will rent my tools and shop for 150.00 a kit..
|
|
|
IN, USA
|
Posted: 8/29/2009 6:18:12 PM EDT
[Last Edit: al_bundy]
[#20]
Originally Posted By gunselman: Anyone in Indianapolis, IN area? I too am looking for someone in the area (OH, IN, KY) that can help with my first build. I am going to order all of my compliance parts and will be ready to go here soon. I'll even furnish the beer Thanks! |
|
|
IN, USA
|
Posted: 10/16/2009 10:01:30 PM EDT
[#21]
Anyone by chance in Missouri? I'm stationed at Fort Leonard wood and would like to bend up a receiver and weld in the rails for a krink build if anyone has the tools handy. Good, cold beer to the host
|
|
|
FL, USA
|
Posted: 11/5/2009 9:10:26 PM EDT
[#22]
I'm up in Holiday Fl. I have a jig for flat bending but no work space, give me a holler,
|
|
|
CT, USA
|
Posted: 11/6/2009 8:30:00 PM EDT
[#23]
Ct here.
Wouldn't mind a REDO on a U-Screw ak-74 build I did here. |
|
|
MO, USA
|
Posted: 2/21/2010 10:51:30 AM EDT
[#24]
Originally Posted By WindyGap:
Anybody in the St. Louis area? http://www.ak47.net/forums/topic.html?b=4&f=51&t=77960&page=7 I am in the area. I don't really have any builing tools, but I might have something useful. |
|
|
TN, USA
|
Posted: 4/14/2010 5:17:57 PM EDT
[#25]
well let me just say i am about 60 miles from chattanooga towards knoxville tn. and i have learn almost everything the hard way! get the right tools or at least the bolt cutter tool. i didnt wished i had. wished i had the akbuilder tools etc...! would like to try a screw kit, but rivets seem to the official better method? if i can help i will but much more info and better waaaayyyyy better people on this site! like i said learned everything the hard way! but i have learned! also unless you are just into the build then might be better off buying one! esp. if you plan on buying all that tooloing? good luck good times and try not to give up! i may have too!
 
|
|
|
UT, USA
|
Posted: 4/15/2010 10:52:00 AM EDT
[#26]
Is this the ATF most wanted list?
|
|
|
IL, USA
|
Posted: 4/16/2010 11:29:06 PM EDT
[Last Edit: Shadow_Grey]
[#27]
Originally Posted By WindyGap:
Anybody in the St. Louis area? big_johnson_92 said: http://www.ak47.net/forums/topic.html?b=4&f=51&t=77960&page=7 I am in the area. I don't really have any builing tools, but I might have something useful. Shadow Says: Right across the river in St. Louis Southeast Metro area. PM me if you want to build...I have a couple of kits waiting. |
|
|
|
Posted: 11/1/2010 1:31:55 PM EDT
[#28]
Bump to save from archive. Also contemplating tooling up for 1st build.
Posted Via AR15.Com Mobile |
|
|
|
DOM
|
Posted: 11/3/2010 11:56:50 PM EDT
[#29]
Instead of bumping it, why doesn't it get tacked? And why hasn't anyone added our build group to the list? All these AK tools going to rust away...
|
|
|
IN, USA
|
Posted: 9/26/2011 8:38:09 PM EDT
[#30]
Richmond, Indiana
gauges 7.62x39 and 5.45x39 ak builder rivet tool and air hammer rivet dies ak builder trigger guard rivet die ak builder barrel removal tool with barrel pin press out tool homemade PSL trunnion removal vise/ worked for my RPD as well PSL homemade brass adapter (to press out barrel without messing up the chamber lips) .300 reemer 20 ton press heavy drill press grinders sand blaster lot of air tools torches mig/arc welder etc.... |
|
|
OK, USA
|
Posted: 9/26/2011 11:53:35 PM EDT
[#31]
Originally Posted By weisel:
Southern Oklahoma....... Dremel With tons and tons of goodies go-no-go gauges tons of punches and files drill press(s) Welder(s) tons of your basic tools..... Anyone in oklahoma want to do a team build? I'm in Tulsa now, frequently down in Paris, Tx. I'd be in for a build party. I have tools, will travel... Updated inventory: 12 ton HF press AK-Builder rivet tool 47 and 74 AK-Builder Barrel press tool 7.62x39 go and nogo gages 5.45x39 go and nogo gages 3mm ream 4mm ream regular barrel pin ream oversize barrel pin ream various rivets and pins in stock hand tools nice Dremel (not enough) punches 14x1 LH tap ruggedly good looks
Coming soon: 5.56 go and nogo gages |
|
|
PA, USA
|
Posted: 11/22/2016 5:31:46 PM EDT
[#32]
York, PA
Milling machine Trunion support drilling fixture Rivet jaws Trunnion press fixture 12 ton press Long rivet jig 5.45/7.62 gauges Lots of end mills/reamers Trigger guard rivet plate Barrel population sleeves Ect. Everything to build an AK I will do any work that does not require an FFL, no charge. Offer only for guys starting out. Populations, assembly onto a registered receiver. Won't touch an 80 or a flat. You can borrow tools though. |
|
|
CA, USA
|
Posted: 2/15/2017 9:24:19 PM EDT
[#33]
Orange county , Ca.
Anyone local? Will be looking for more tools. welder 1mm bender |
|
|
UT, USA
|
Posted: 2/17/2017 11:23:50 PM EDT
[#34]
Davis County, Utah
Please don't contact me to ask if I can do the work for you, I own this stuff but I don't actually know how to run it. If you don't have the skills its worthless to you. I've been getting the equipment for years but haven't started learning it. CNC Mill Autodesk Inventor LT/HSM CAM/Lynx cnc Manual Lathe (2) Press Tig Welder Ginders, Dremel, and misc. tools 54r go/no go .300 Blackout go/no go 5.45 go/shim for no go (worked fine on 11 rifles so far) |
|
|
OH, USA
|
Posted: 6/5/2017 12:37:12 PM EDT
[#35]
Painesville ohio most build tools 12 ton press .drill press
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
