User Panel
Posted: 8/15/2016 8:44:16 AM EDT
Anyone try brake cleaner for cleaning the gas tube on an AR? Just thinking that would clean the gas system very well after shooting steel cased ammo. I know for sure it will clean the bore wonderfully well, and then I use a good oil to oil the bore........just never shot it thru the gas system!
|
|
I typically use brake cleaner on barrel threads before installing/timing muzzle devices to make sure there is no residual oils before applying thread-lock.
That being said, the brake cleaner will remove all lube and flash rust can be an issue if the bore is not lubricated right away. Also, not sure how effective the brake cleaner would be in removing copper fouling - a contributor to reduced accuracy. Never tried it in the gas system/tube. |
|
in the 20 years I was in the military, the only thing we did to clean the gas tube was to take a pipe cleaner and cleaned it as far as the pipe cleaner would go in, that's it. that's what I still do with my AR, I also shoot steel case ammo, never had failure due to gas problems
I believe you are too overly concern with cleaning the gas tube, just use a pipe cleaner to clean the first 3 or 4 inches of it, then put a period at the end of that cleaning process |
|
Quoted:
I typically use brake cleaner on barrel threads before installing/timing muzzle devices to make sure there is no residual oils before applying thread-lock. That being said, the brake cleaner will remove all lube and flash rust can be an issue if the bore is not lubricated right away. Also, not sure how effective the brake cleaner would be in removing copper fouling - a contributor to reduced accuracy. Never tried it in the gas system/tube. View Quote I read the AMU doesn't clean copper fouling. It just screws up their consistency and data recordings IIRC.. |
|
Quoted:
I read the AMU doesn't clean copper fouling. It just screws up their consistency and data recordings IIRC.. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I typically use brake cleaner on barrel threads before installing/timing muzzle devices to make sure there is no residual oils before applying thread-lock. That being said, the brake cleaner will remove all lube and flash rust can be an issue if the bore is not lubricated right away. Also, not sure how effective the brake cleaner would be in removing copper fouling - a contributor to reduced accuracy. Never tried it in the gas system/tube. I read the AMU doesn't clean copper fouling. It just screws up their consistency and data recordings IIRC.. You'll have to clean it sooner or later. It'll eventually build up to the point accuracy starts dropping off. Now you don't scrub it out every range trip. Just when accuracy drops off |
|
Be careful with that. I read about a guy who heated brake cleaner by welding a piece that still had some on it, and next thing you know, he was disabled for life. It produces the same nerve gas used by the nazis, i think.
Edit to add: needs argon, too, but still, phosgene gas http://www.brewracingframes.com/safety-alert-brake-cleaner--phosgene-gas.html |
|
Quoted:
Be careful with that. I read about a guy who heated brake cleaner by welding a piece that still had some on it, and next thing you know, he was disabled for life. It produces the same nerve gas used by the nazis, i think. Edit to add: needs argon, too, but still, phosgene gas http://www.brewracingframes.com/safety-alert-brake-cleaner--phosgene-gas.html View Quote Same problem exists with the almost identical Gunscrubber. |
|
I squirt some down the gas tube when I clean my rifles. Might not help but doesn't hurt.
I only use non chlorinated brake cleaner. |
|
I used it for at least 10 years, with no problems. Remember it removes all lubrication, re-lub well.
|
|
Non-chlorinated brake cleaner is really good carbon remover, but you need to re-oil anything it comes in contact with because it strips away everything. Will not hurt metal finish, but can eat up polymer and wood finishes. It will do absolutely nothing for copper or lead fouling. It worked great for cleaning 240 and 249 pistons quickly when I was in the Army; they still needed to be re-oiled and buffed out. That had zero effect on weapon function, but .mil weirdness and all. No need for it on AR platform weapons.
Gun Scrubber or whatever it is called is basically the same thing that costs more. |
|
Don't clean your gas tube.
Only real use for brake cleaner (mostly acetone) is to degrease as part of prep for painting your gun. Your BCG and upper should have enough lube to keep the carbon in suspension and it will just wipe clean. No solvents or brushing needed except in the chamber and bore IMO. |
|
|
|
Do NOT use the Red/White CRC brake cleaner on any part that gets hot. It creates Phosphene gas and can make you deathly ill.
edit, see it's already been covered. We just had a safety meeting at work about it. |
|
Quoted:
Same problem exists with the almost identical Gunscrubber. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Be careful with that. I read about a guy who heated brake cleaner by welding a piece that still had some on it, and next thing you know, he was disabled for life. It produces the same nerve gas used by the nazis, i think. Edit to add: needs argon, too, but still, phosgene gas http://www.brewracingframes.com/safety-alert-brake-cleaner--phosgene-gas.html Same problem exists with the almost identical Gunscrubber. Both evaportate quickly, and most people wouldn't go shooting right after cleaning their guns. But yes, the potential is there. I prefer acetone for cleaning before welding. |
|
|
Quoted:
Is that the chlorinated version? I think my can is green. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Do NOT use the Red/White CRC brake cleaner on any part that gets hot. It creates Phosphene gas and can make you deathly ill. edit, see it's already been covered. We just had a safety meeting at work about it. Is that the chlorinated version? I think my can is green. Yes, and it works 10x better than the green can. It's also the best bug killing spray ever, I use it for covering fire on yellow jackets until I can get close enough with the gas can |
|
Quoted:
Anyone try brake cleaner for cleaning the gas tube on an AR? Just thinking that would clean the gas system very well after shooting steel cased ammo. I know for sure it will clean the bore wonderfully well, and then I use a good oil to oil the bore........just never shot it thru the gas system! View Quote A pack of gas tube is really, really cheap. You can replace in about 5 minutes. Maybe once a year you punch out the old gas tube, replace it with a new one. Cleaning the gas tube is as silly as cleaning the buffer spring. They're cheap parts that you can replace in less than a few minutes/seconds and you waste all that time trying to keep a cheap part clean not knowing the more you clean it, the worst it gets. You spend maybe 30-40 minutes trying to clean every nook and cranny you can think of. Just imagine if you cleaned the gun for 10 minutes, then used that remaining 20 minutes to spend time with your family, friends, or just for yourself. Don't waste your life doing silly things especially trying to clean a cheap 2 dollar pipe. I mean every time you shit in the toilet do you snake it? |
|
Quoted:
A pack of gas tube is really, really cheap. You can replace in about 5 minutes. Maybe once a year you punch out the old gas tube, replace it with a new one. Cleaning the gas tube is as silly as cleaning the buffer spring. They're cheap parts that you can replace in less than a few minutes/seconds and you waste all that time trying to keep a cheap part clean not knowing the more you clean it, the worst it gets. You spend maybe 30-40 minutes trying to clean every nook and cranny you can think of. Just imagine if you cleaned the gun for 10 minutes, then used that remaining 20 minutes to spend time with your family, friends, or just for yourself. Don't waste your life doing silly things especially trying to clean a cheap 2 dollar pipe. I mean every time you shit in the toilet do you snake it? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Anyone try brake cleaner for cleaning the gas tube on an AR? Just thinking that would clean the gas system very well after shooting steel cased ammo. I know for sure it will clean the bore wonderfully well, and then I use a good oil to oil the bore........just never shot it thru the gas system! A pack of gas tube is really, really cheap. You can replace in about 5 minutes. Maybe once a year you punch out the old gas tube, replace it with a new one. Cleaning the gas tube is as silly as cleaning the buffer spring. They're cheap parts that you can replace in less than a few minutes/seconds and you waste all that time trying to keep a cheap part clean not knowing the more you clean it, the worst it gets. You spend maybe 30-40 minutes trying to clean every nook and cranny you can think of. Just imagine if you cleaned the gun for 10 minutes, then used that remaining 20 minutes to spend time with your family, friends, or just for yourself. Don't waste your life doing silly things especially trying to clean a cheap 2 dollar pipe. I mean every time you shit in the toilet do you snake it? OMG...Am I on Facebook? |
|
Brake cleaner works really well as a rinse after using cleaners and solvents and brushes - does an nice rincs job. It does require re applying oil to any surface that needs it but saves a lot of patch use.
I did not know about the phosgene thing with chlorinated solvents and fire - not good. i have always used non chlorinated but did not really know why. Rinsing out the gas tube can't hurt. |
|
Other good cleaners:
Throttle Body Cleaner (acetone [80-90%], CO2 [5-10%], with 1 to 3% of the following: 3-methylhexane, methylcyclohexane, n-heptane, toluene, and less than 1% cyclohexane) Carburetor Cleaner (methanol [30-40%], toluene [30-40%], acetone [20-30%], ethylbenzene [less than .2%]) Non-chlorinated brake cleaners (methanol [40-50%], toluene [10-20%], acetone [5-15%], 3-methylhexane [5-10%], CO2 [5-10%], n-heptane [5-10%], methylcyclohexane [3-5%], naphtha [3-5%], cyclohexane [1-3%], and ethylbenzene [less than .2%]. Chlorinated brake cleaner is 95-100% tetrachloroethylene, and the remainder CO2. You start to see a pattern as to what makes to good cleaner. |
|
I have a small parts washer I keep filled with mineral spirits. Mild cleaner and safe to work with but will also strip all the oils off.
|
|
Quoted:
I have a small parts washer I keep filled with mineral spirits. Mild cleaner and safe to work with but will also strip all the oils off. View Quote Not sure of your application for it so not sure if it would be good, but adding some ATF to the mix will add a layer of protection and still clean. |
|
Quoted: in the 20 years I was in the military, the only thing we did to clean the gas tube was to take a pipe cleaner and cleaned it as far as the pipe cleaner would go in, that's it. that's what I still do with my AR, I also shoot steel case ammo, never had failure due to gas problems I believe you are too overly concern with cleaning the gas tube, just use a pipe cleaner to clean the first 3 or 4 inches of it, then put a period at the end of that cleaning process View Quote |
|
Quoted:
Not sure of your application for it so not sure if it would be good, but adding some ATF to the mix will add a layer of protection and still clean. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I have a small parts washer I keep filled with mineral spirits. Mild cleaner and safe to work with but will also strip all the oils off. Not sure of your application for it so not sure if it would be good, but adding some ATF to the mix will add a layer of protection and still clean. I always oil after cleaning. Mineral spirits does a great cleaning job. |
|
Quoted:
Anyone try brake cleaner for cleaning the gas tube on an AR? Just thinking that would clean the gas system very well after shooting steel cased ammo. I know for sure it will clean the bore wonderfully well, and then I use a good oil to oil the bore........just never shot it thru the gas system! View Quote You almost certainly do not need to clean the gas tube. Chlorinated brake cleaner has VERY VERY nasty stuff in it. Non-chlorinated brake cleaner typically has Acetone and/or Toluene in it, which is not much better. Don't screw around with either of them. It will eventually mess you up. There is virtually nothing on an AR that you need to be cleaning with brake cleaner unless you're using the non-chlorinated type to strip paint, and even that's a bad idea given the alternatives available. |
|
|
Reel Scrubber in the fishing section is the exact same stuff as Gun Scrubber. Same hit different label. I've used gun scrubber for 30+ years. I use it because it works fast. Does require relubing as it will remove all oil anywhere it touches.
|
|
Clean a gas tube?
It's a gas pressure direction device. One function. No metric for maintenance. It works or it doesn't. Never heard of a malf due to a gas tube. |
|
Quoted:
The military seems full of strange cleaning theories, I guess to keep young men occupied? There is no need to stick pipe cleaners in gas tubes. View Quote View All Quotes View All Quotes Quoted:
Quoted:
in the 20 years I was in the military, the only thing we did to clean the gas tube was to take a pipe cleaner and cleaned it as far as the pipe cleaner would go in, that's it. that's what I still do with my AR, I also shoot steel case ammo, never had failure due to gas problems I believe you are too overly concern with cleaning the gas tube, just use a pipe cleaner to clean the first 3 or 4 inches of it, then put a period at the end of that cleaning process Don't forget to stagger your gas rings...... |
|
Quoted:
The military seems full of strange cleaning theories, I guess to keep young men occupied? There is no need to stick pipe cleaners in gas tubes. View Quote View All Quotes View All Quotes Quoted:
Quoted:
in the 20 years I was in the military, the only thing we did to clean the gas tube was to take a pipe cleaner and cleaned it as far as the pipe cleaner would go in, that's it. that's what I still do with my AR, I also shoot steel case ammo, never had failure due to gas problems I believe you are too overly concern with cleaning the gas tube, just use a pipe cleaner to clean the first 3 or 4 inches of it, then put a period at the end of that cleaning process My buddy did two tours in VN. He said he never cleaned a gas tube on M-16, ever. 40 years later he still never has on his ARs. I use brake parts cleaner all the time. Never a problem. Non-chlorinated. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.