 mnhntr 
Member
Joined: Apr 2008  MN, USA
 Posts: 58 Feedback: 100% (3) |
Posted: 6/26/2012 3:45:56 PM
THE IMAGE ABOVE IS A PAID ADVERTISEMENT |
|
|
|
|
Posted: 6/26/2012 4:21:16 PM
[Last Edit: 6/26/2012 4:22:44 PM by 007Kevin]
disconnector spring improperly installed or failing.
ETA - most likely culprit but check to make sure disconnector and fcg are all as they should be and don't have any abnormalities. Perform function check. |
|
|
|
a308garand
NRA Life Member
Team Member
Joined: Jul 2002 CA, USA
Posts: 2908 Feedback: 100% (15) Link To This Post |
Posted: 6/26/2012 4:48:11 PM
Disconnector hook not grabbing hammer, spring wrong or disconnector hook worn
Trigger pin walking out of receiver. Makes the nose of the trigger misallign with hammer, does not reset and allows hammer to fall. Check the hammer spring installed so thae legs rest on the trigger pin groove, also that the spring is not installed backwards.  |
|
|
ColonelHurtz
Horror and moral terror are your friends.
Team Member
Joined: Apr 2007  KHM
Posts: 25544 Feedback: 100% (25) Link To This Post |
Posted: 6/26/2012 5:14:34 PM
Check for broken hammer pin.
|
|
ARCHIVED
