Just finishing purchasing the final parts for a 14.5 inch build I am doing and wanted to get a quick check on if the combo of these parts will work or not.
Barrel is a 14.5 inch middy from BCM in the light weight profile. It will be pin and welded with a flash comp from Griffin Armament as the rifle may be used with my RECCE 5 when it clears.
I have ready that the BCM middy barrels are drilled to run 5.56 and may have issues with ammo such as tula and wolf due to lower pressure loadings. The recommendations for spring and buffer are normal spring weight and H buffer. With an already "restrictive" gas port, is there any need for an adjustable gas block such as the slr? I figure it would be set wide open and only closed down some when a surpressor is added?
I am used to building up with blue springco springs and a h2 buffer on my 10.5 and 11.5 SBR rifles, so just wanted to double check before I purchased some items.
Any other buffer systems like the silent capture spring or giesselle 42 spring set up that I should look at? Would like the rifle to function well and obviously be as soft recoiling as possible.
Thanks
Pat