Site Notices
10/1/2014 2:19:24 PM
10/1/2014 10:30:17 AM
Author
Message
gomlin
Offline
Posts: 29
Feedback: 0% (0)
Posted: 3/22/2013 11:49:06 PM
[Last Edit: 3/22/2013 11:51:00 PM by gomlin]
My 80% lowers are shipping soon and I want to ensure I have the correct end mills on hand. I know a 2 flute works better for aluminum. Mostly I'm curious about the best diameter and length for some of the tasks. For instance I can see where a longer end mill would be helpful for the trigger slot. Thanks

Jim

Looking for pretty specific measures of the end mill sizes so I can order what I need.
cavedweller29
Member
Offline
Posts: 85
Feedback: 0% (0)
Link To This Post
Posted: 3/23/2013 3:55:05 AM
[Last Edit: 3/23/2013 5:15:10 AM by cavedweller29]
You will need a 7/16 to cut the radius's for the corners and a 5/16 for the trigger slot if you want "mill spec". You will also need to cut 1.25" deep. I prefer to use a 1.25" flute length and cut the whole thing with that but some people use a shorter flute length and cut to its max depth and then change to the longer mill and cut the rest. I like the center cutting 37 degree helix in 2 flute for milling lowers. It is designed for aluminum and it seems to cut a little better. I can't find them in 7/16....at least reasonably priced, so I use 1/2" instead of 7/16 for the main fire control pocket. You will also need a 3/8 drill bit for the safety, a #23 drill bit for the trigger and hammer pins, a .155, or .156 reamer and a .375 reamer. I had everything but the reamers so I paid the $20 bucks or so for them. If you are buying all of them and buy low to middle grade cutters, bits and reamers you will probably have close to $50 into it. You can spend a lot more or a little less but that will give you a ball-park price. If you have real sharp and good bits, you can get away without the reamers by using a 5/32 and a 3/8 bit. I like to go slightly undersize and ream to size but you don't really have to. Take your time and measure 6 times before you cut once. 7075 can't be welded and it sucks to make a mistake...trust me.

Enco is a good source, good prices, good selection and good service all combined with fast shipping. There are places that may be a little cheaper but it won't be by much and if you find something cheaper, they price match anyway.

I am no expert but I do a lot of metal work and have a small machine shop set up in my garage so I will answer your questions as best I can.
dbshelton
Offline
Posts: 33
Feedback: 0% (0)
Link To This Post
Posted: 3/23/2013 6:55:36 AM
Dweller is right on, but I found that the 3 flute mills for aluminum worked a little better for me. It seemed like everything ran a little smoother with a little less chatter. As another source, I buy mine from McMaster-Carr.
ca_longshot
NRA Benefactor Member
NRA
Offline
Posts: 133
Feedback: 0% (0)
Link To This Post
Posted: 3/23/2013 11:34:59 AM
[Last Edit: 3/23/2013 10:37:53 PM by ca_longshot]
For my benchtop CNC, 3/8" em for FCG pocket and long-reach 1/4" em for the trigger slot.
(All radius's are compensated for in my CNC program!)
Both are 2 flute Cobalt. These cut aluminum like butter and gives an excellent Finish.
BTW...The Sharper Cobalt/HSS , will give you a better finish and require less force compared to Carbide of the same design!
CLICKBANGBANG
Buried Susie Derkins under the tire swing.
Online
Posts: 11426
Feedback: 100% (51)
Link To This Post
Posted: 3/23/2013 5:35:20 PM
I'm going to be using a Sherline. Haven't started yet. Still shopping for tools and setting up.
Trapped by a hideous graknil, Spiff draws his trusty atomic napalm neutralizer. "Chew electric death, snarling cur!"
jcbvh
Offline
Posts: 16
Feedback: 100% (6)
Link To This Post
Posted: 3/24/2013 6:11:17 PM
[Last Edit: 3/24/2013 6:12:11 PM by jcbvh]
Scroll down to the middle of the page:

http://www.cncguns.com/tooling.html
Ar-Bret
Offline
Posts: 756
Feedback: 100% (5)
Link To This Post
Posted: 3/24/2013 7:55:09 PM
[Last Edit: 3/24/2013 7:57:23 PM by Ar-Bret]
Well,

What tooling you need or want...?

McMaster is fine, as is MSCdirect.com as well

as for the types of end mills...

i have lots of tooling for my milling machine and such...But I use a Roughing Mill for the majority of the project...

Then switch to a 2 flute and run a finishing pass...In solid carbide, Usually a 4 Inch...I have them in abundance in the shop...

i also have built them from scratch as well...And then you need a few other things...Facing mills etc...Prefer carbide insert type...

My 2 cents
Bret
RyJones
Actually, I hate everyone.
NRA
Offline
Posts: 14847
Feedback: 100% (3)
Link To This Post
Posted: 3/24/2013 8:03:10 PM
I've learned which end mill not to buy, so far. Ordered some more to see if they work better.
http://blog.ryjones.org/
Come visit: http://boomershoot.org/2013/blast.htm I'm in spot 1, all the way east.