User Panel
I bought two from JDMachine. When I bought the 223 was available. I received a confirmation email but when I try to call the number on the email I receive a "call cannot be completed as dialed" message. Hope this isn't a scam.
One thing I did though was use my home address as the shipping address without thinking. I'd like to reach them to provide FFL information but as mentioned have been unable to. Does anyone see this being a problem? |
|
Quoted:
I bought two from JDMachine. When I bought the 223 was available. I received a confirmation email but when I try to call the number on the email I receive a "call cannot be completed as dialed" message. Hope this isn't a scam. One thing I did though was use my home address as the shipping address without thinking. I'd like to reach them to provide FFL information but as mentioned have been unable to. Does anyone see this being a problem? It should not be a problem if you have provided them with the FFL holders information, address, etc. If they only have your address then they will not be able to ship your lower. Have you tried sending an email? |
|
I did send them an email yes. I sent it as soon as realized what I had done. Has anyone done business with them in the past? Was a little concerned because of my inability to even get a voice message from them when I called. Am really wanting to just connect with them to make sure things are ok with the purchase since I did not include my FFL on the original purchase request.
|
|
Quoted:
I'm a newbie to building AR-15's and I have a question hopefully one of you guys can answer for me. Rguns still has 6.8mm lower receivers in stock. Can I put a 5.56 upper on a 6.8mm lower? I would much rather build the .223/5.56 variety because ammo is cheaper. (Well, maybe not right now b/c of the potential ban but in general it has been). Thanks! Rguns Lower receivers I sent them an email earlier this week about the 6.8 lower and they are not in stock, they said it would be 4-6 weeks. I also tried to ask about the .204 Ruger marked lower they had on clearance for $90 but they never did get back to me about that. |
|
Purchased a 6.8mm lower from rguns earlier today before seeing the above post about the email and being out of stock. I guess we'll see how long it takes. Started a build for my first AR when I made an impulse buy for a PSA upper on black friday, and a few sale purchases later, I have everything but a lower.
Current events suck with my timing. I'll blame the federal gov't because when trading in my Rem 700 2 weeks ago, I got a very fair deal for a lower. When doing paper work, I got to find out I had to be 21, which is a few months away. Funny how you can buy an AR at 18, but not part of one. Now it's a "father son" build since I'm home from school. |
|
My problem is that I bought this lower and now I'm probably screwed on getting an LPK, upper and mags to finish it as intended(7.62X39). I really don't care if it has the features demonized by the 94 ban, but if its an outright ban, I should be able to get a K-31, G98 or Finnish M28/M39 out of it the way things are going on Gun Broker. My dad has a complete DPMS lower he may not get to finish either. He ordered an upper from DSA but it's backordered until god knows when. Does anyone know a place that has any uppers in stock that are under $500? Caliber doesn't matter, just want to finish the gun before the end of January.
|
|
Noveske Gen 2 Chainsaw Lowers in stock! You're welcome!!
http://www.tieronearms.com/ProductDetails.asp?ProductCode=FFL-Chainsaw |
|
Quoted:
Noveske Gen 2 Chainsaw Lowers in stock! You're welcome!! http://www.tieronearms.com/ProductDetails.asp?ProductCode=FFL-Chainsaw Already OOS. That was fast. |
|
Quoted:
Quoted:
Noveske Gen 2 Chainsaw Lowers in stock! You're welcome!! http://www.tieronearms.com/ProductDetails.asp?ProductCode=FFL-Chainsaw Already OOS. That was fast. Is everybody buying at least 10 at a a time or what!? |
|
Quoted:
Quoted:
Quoted:
Noveske Gen 2 Chainsaw Lowers in stock! You're welcome!! http://www.tieronearms.com/ProductDetails.asp?ProductCode=FFL-Chainsaw Already OOS. That was fast. Is everybody buying at least 10 at a a time or what!? Must be, it was in stock all day. Then when i listed the link it was gone in a matter of a minute or so. Somebody was fast with their cc digits lol |
|
thanks for the info man. I had mine ordered before they showed out of stock as well so I am hoping they will show up. I have sent them two emails and no response this far. I am guessing they are slammed trying to deal with the overwhelming demand
|
|
Does anyone know if essential arms is out of stock on the 223 lowers?
|
|
Quoted:
Does anyone know if essential arms is out of stock on the 223 lowers? Been trying all day to get through. I am wondering if they are closed for Christmas. |
|
Quoted:
I did send them an email yes. I sent it as soon as realized what I had done. Has anyone done business with them in the past? Was a little concerned because of my inability to even get a voice message from them when I called. Am really wanting to just connect with them to make sure things are ok with the purchase since I did not include my FFL on the original purchase request. Just wanted to give a quick update on things. While I haven't heard from JDMachines directly I was at least able to get a voice mail today and left a message. |
|
|
just ordered a psa and ati from psa. get them while you can! the ati is only 59 and 120 for the psa 7$ shipping.
|
|
Quoted:
PSA has them in stock, beaten by 13 seconds. Gotta be quick on them keys there sir!! |
|
Quoted:
wow.....I'm glad I stickied this. Thx...I got one! slasher Don't thank me sir. Some other fellah under the "Discussions" forum put a notice up before I did. I kindly redirected him to this thread. |
|
Well, I found your thread...they're gone and it took about an hour. They still have some ATI polymer lowers though.
|
|
|
|
I know this is a lower receiver thread but since it has become basically the same situation for stripped uppers thought I'd let everyone know core15 still has stripped uppers for $95 I just ordered one last night along with one of their new v.3 charging handles: http://www.core15rifles.com/core15-upper-receiver-100287.html
|
|
Quoted:
I know this is a lower receiver thread but since it has become basically the same situation for stripped uppers thought I'd let everyone know core15 still has stripped uppers for $95 I just ordered one last night. http://www.core15rifles.com/core15-upper-receiver-100287.html We appreciate your intel and you know I think it has evolved into whatever is in stock thread. Thanks |
|
Quoted:
Quoted:
I know this is a lower receiver thread but since it has become basically the same situation for stripped uppers thought I'd let everyone know core15 still has stripped uppers for $95 I just ordered one last night. http://www.core15rifles.com/core15-upper-receiver-100287.html We appreciate your intel and you know I think it has evolved into whatever is in stock thread. Thanks I think you are right. Anyone know where bolt carrier groups are In Stock? |
|
dammit, i missed that psa lower. Is there a notification i can set for my phone for when this thread gets updated?
|
|
Quoted:
dammit, i missed that psa lower. Is there a notification i can set for my phone for when this thread gets updated? idk.. good idea though. the psa and ATi lowers at PSA sold out in under a hour. it was crazy.. i hesitated and missed them. |
|
Quoted:
dammit, i missed that psa lower. Is there a notification i can set for my phone for when this thread gets updated? Yea I think you can subscribe to the thread on the bottom right hand corner of the screen. |
|
Since I couldn't find any strippped lowers in stock, I got 2 80% lowers, and a jig to complete them.
http://www.m-16parts.com/ $90.00 anodized |
|
I checked m-16parts... No inventory tracking. You can order 2000 if you want. Id be weary of when you would actually get them. At least the price isnt too bad.
|
|
Quoted:
I know this is a lower receiver thread but since it has become basically the same situation for stripped uppers thought I'd let everyone know core15 still has stripped uppers for $95 I just ordered one last night. http://www.core15rifles.com/core15-upper-receiver-100287.html Thanks! In for 1. |
|
|
Aero Precision will be back in stock 1-2 weeks via their Facebook page post.
|
|
Quoted:
Aero Precision will be back in stock 1-2 weeks via their Facebook page post. They have a website? I searched but only surplus ammo came up. |
|
Quoted:
Quoted:
Aero Precision will be back in stock 1-2 weeks via their Facebook page post. They have a website? I searched but only surplus ammo came up. http://aeroprecisionusa.com/ |
|
Quoted:
Update? Palmetto has stripped M4 style uppers in stock, just an FYI. http://palmettostatearmory.com/index.php/m4-premium-madness-16-cmv-chrome-lined-stripped-upper-without-bcg-or-charging-handle.html If we could only find bcg's and lowers. |
|
I keep missing them... I am about to go to all the "possible" websites and set an account up and already have a
card setup ready to use! |
|
Quoted:
brownells has a pre-order going on. Im assuming the wait for that preorder is going to be forever though But on another note, I ordered their $85 Aero Precision lower on last Friday I think and on monday I received an Email asking for my FFL. Dont know if this means I may be getting a late present sometime in January or if they just want to place me on the months long waiting list *fingers crossed* Edit: That order was placed on Brownells site* |
|
Quoted:
brownells has a pre-order going on. Any more details on this? Are these the "Tactical Machine" ones? I see they appear to be new on their site but the order button on my phone says "Backorder" not "Preorder". |
|
The preorder lower on Brownells is a Tactical Machining lower. According to TM's facebook page they had an ETA of about 4 weeks out on the Brownells orders, Brownells said initial shipments in January. I ordered up 2 of them.
|
|
http://www.brownells.com/rifle-parts/receiver-amp-action-parts/receivers/lower-receivers/ar-15-stripped-lower-receiver-prod55099.aspx
This is the Link for the preorder... Must be nice to sell out of stuff you don't even own yet :) I ordered some the day they announced it. |
|
just a heads up, essential arms is phone order only. The nice lady on the phone informed me of that. Also the line is really busy and the voicemail is full, just keep calling and calling and you should eventually get through. $110 shipped to your ffl
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.