NEW IWC Micro Mount-n-slot installed on M4 USGI Handguards - Page 1

AR-15 » Slings and Other Accessories

[ARCHIVED THREAD] - NEW IWC Micro Mount-n-slot installed on M4 USGI Handguards

ARCHIVED

Author

Message

MikePapa95B

Member

Joined: Dec 2007

TN, USA

Posts: 8

Feedback: 0% (0)

Posted: 4/12/2011 12:39:07 AM

[Last Edit: 4/12/2011 7:39:19 AM by MikePapa95B]

THE IMAGE ABOVE IS A PAID ADVERTISEMENT

First, I haven't posted here in awhile, but I still read and search here often. Hopefully I will get this all in here correctly. This is a new product that I have been searching for now for quite some time. Thanks to Earl for shipping me one early. And for a very professional operation and a very unique high quality product. Also thanks to heavyduty for his first posting of these, or I wouldn't have found them and called Earl at IWC. Anyway, I will let the pics tell the story. Hope you enjoy.

User Info

MikePapa95B Member Joined: Dec 2007 TN, USA Posts: 9 Feedback: 0% (0) Link To This Post	Posted: 4/12/2011 12:42:10 AM
	User Info

heavyduty Throbbing Member Team Member Joined: Nov 2000 IL, USA Posts: 2692 Feedback: 100% (39) Link To This Post	Posted: 4/12/2011 8:57:58 AM Very nice job! Did the heat shield fit back in afterward?
	User Info

MOUNT-N-SLOT

Partner

Industry Partner

Joined: Dec 2009

CO, USA

Posts: 255

Feedback: 0% (0)

Link To This Post

Posted: 4/12/2011 9:38:20 AM

Hi MikePapa95B!

WOW! Your pics of the install turned out great!

Thanks again!

MOUNT-N-SLOT

PS... Thanks for the kind words about Impact Weapons Components, we appreciate it!

MOUNT-N-SLOT brand Direct Attach Mounts
www.impactweaponscomponents.com
sales@impactweaponscomponents.com

User Info

MikePapa95B Member Joined: Dec 2007 TN, USA Posts: 11 Feedback: 0% (0) Link To This Post	Posted: 4/12/2011 6:36:00 PM Originally Posted By heavyduty: Very nice job! Did the heat shield fit back in afterward? heavyduty - The handguards had the double heatshield. I had to trim a small portion on the corner of outer one. The inner heat shield fit back in with no modification.
	User Info

bushwack Member Team Member Joined: Jan 2003 OK, USA Posts: 746 Feedback: 0% (0) Link To This Post	Posted: 4/13/2011 7:12:55 PM Almost makes me wish I ran QD swivels on my slings.
	User Info

MikePapa95B Member Joined: Dec 2007 TN, USA Posts: 13 Feedback: 0% (0) Link To This Post	Posted: 4/17/2011 9:10:52 AM Originally Posted By bushwack: Almost makes me wish I ran QD swivels on my slings. It's never too late to change!!!
	User Info

phlii

NRA Life Member

Team Member

Joined: Dec 2003

TX, USA

Posts: 725

Feedback: 100% (30)

Link To This Post

Posted: 5/30/2011 9:00:10 PM

[Last Edit: 5/30/2011 11:15:10 PM by phlii]

I mounted one of these on my Magpul MOE and it came out great. I used the instructions here and from the links on the IWC site.

Here are some things that worked for me:

1. Put masking tape on both sides of the area you are going to mount the socket.

2. Use a Forstner bit as it cuts a clean hole. Drill a pilot hole before using the Forstner.

3. Put a small piece of wood inside the handguard opposite the hole you are drilling to 'catch' the bit so it doesn't damage anything.

4. Make dimples for the set screw holes. If you can't fit a drill bit in there, use a mandrel bit on a Dremel tool. Put lock-tite on the set screws when you install them and don't overtighten.

5. Before drilling check the placement of the socket as the MOE heatshields may come in contact with it. Otherwise, you may have to do some filing.

Res Publica est Mortua

Ezekiel 25:17

User Info