User Panel
[#1]
Originally Posted By ThatDude812:
I know it's a picture thread but I haven't had any luck in the ruger forum. I'm looking for a Pelican case to hold my Ruger LCP with a lasermax and 1.5" grip extension (from adamsgrips.com) with about 3 more mags that have the same extension. Maybe even squeeze my kershaw burst in there. I'm looking for a smaller case that would fit everything snugly, and take up minimal room in my checked bag when traveling. I would greatly appreciate any help with this! I'll be flying with my CCW for the 1st time in a couple of weeks and want to find the right sized pelican asap. I figure pelican is the best so I want to do it right the 1st time. I'll of course post pictures once I find the right case and cut it to fit! Thanks y'all. View Quote Go to caseclub.com and design your own. I've got one coming for my Glock 20. I'll post up pics when I get it. I went with polyethylene foam, which will be more rigid and durable. |
|
|
[#2]
You guy/gals have some nice cases....
Question is everyone useing Plasti-Dip? Has anyone used Rust-Oleum LeakSeal? Also do you spray just the top part of the foam or do you spray all between the cutouts too? Thanks |
|
|
[#3]
Originally Posted By Hoss454:
You guy/gals have some nice cases.... Question is everyone useing Plasti-Dip? Has anyone used Rust-Oleum LeakSeal? Also do you spray just the top part of the foam or do you spray all between the cutouts too? Thanks View Quote I don't use it, I use 2.2lb closed cell polyethylene foam instead of the charcoal foam that comes with the case. Much firmer, more durable and it won't absorb liquid or break down from oil or (most) cleaning solvents. |
|
|
[Last Edit: Eagle34]
[#4]
Originally Posted By ThatDude812:
I know it's a picture thread but I haven't had any luck in the ruger forum. I'm looking for a Pelican case to hold my Ruger LCP with a lasermax and 1.5" grip extension (from adamsgrips.com) with about 3 more mags that have the same extension. Maybe even squeeze my kershaw burst in there. I'm looking for a smaller case that would fit everything snugly, and take up minimal room in my checked bag when traveling. I would greatly appreciate any help with this! I'll be flying with my CCW for the 1st time in a couple of weeks and want to find the right sized pelican asap. I figure pelican is the best so I want to do it right the 1st time. I'll of course post pictures once I find the right case and cut it to fit! Thanks y'all. View Quote Pelican 1200 should work for that purpose. BTW you need to check the case separately, can't be stashed inside another bag as far as I know. I do know you would have to at least declare the weapon. |
|
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
[#5]
Originally Posted By Eagle34:
Pelican 1200 should work for that purpose. BTW you need to check the case separately, can't be stashed inside another bag as far as I know. I do know you would have to at least declare the weapon. View Quote View All Quotes View All Quotes Originally Posted By Eagle34:
Originally Posted By ThatDude812:
I know it's a picture thread but I haven't had any luck in the ruger forum. I'm looking for a Pelican case to hold my Ruger LCP with a lasermax and 1.5" grip extension (from adamsgrips.com) with about 3 more mags that have the same extension. Maybe even squeeze my kershaw burst in there. I'm looking for a smaller case that would fit everything snugly, and take up minimal room in my checked bag when traveling. I would greatly appreciate any help with this! I'll be flying with my CCW for the 1st time in a couple of weeks and want to find the right sized pelican asap. I figure pelican is the best so I want to do it right the 1st time. I'll of course post pictures once I find the right case and cut it to fit! Thanks y'all. Pelican 1200 should work for that purpose. BTW you need to check the case separately, can't be stashed inside another bag as far as I know. I do know you would have to at least declare the weapon. Go to TSA's website, they have clear directions. Must be declared, inspected, locked and then put inside another bag. |
|
|
[Last Edit: DanW]
[#6]
|
|
|
[#7]
How hot can your rifle be when you put it it the case? Ways to mitigate this?
|
|
"That pistol just kept saying, let go of my ears, you don't know what you're doing." -thehellbringer
|
[#8]
Originally Posted By DanW:
My case arrived today from Case Club, and it came out as expected. It is a Pellican 1400. This is a Glock 20 with a Glock 40 MOS slide, Vortex Venom, Streamlight TLR-1 HL, three magazines, and batteries. http://i726.photobucket.com/albums/ww266/PrincipalSkinr/20160609_175708_zps8zdrghn5.jpg http://i726.photobucket.com/albums/ww266/PrincipalSkinr/20160609_175713_zpsmghfrlmu.jpg http://i726.photobucket.com/albums/ww266/PrincipalSkinr/20160609_175736_zpsihywrxdk.jpg And a closeup... http://i726.photobucket.com/albums/ww266/PrincipalSkinr/Sports/20160609_180028_zpsj9rpajgm.jpg View Quote Nice layout there. |
|
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
[Last Edit: Eagle34]
[#9]
Oops DT.
|
|
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
[#11]
|
|
|
[#12]
Who makes that divider?
|
|
|
[Last Edit: FiveToOne]
[#13]
|
|
|
[Last Edit: PoopdeckPappy]
[#14]
|
|
|
[#15]
Originally Posted By PoopdeckPappy:
A few things we've been working on lately. http://i.imgur.com/SOCxn8c.jpg http://i.imgur.com/fBBXXOc.jpg http://i.imgur.com/G480doz.jpg http://i.imgur.com/i4yls91.jpg http://i.imgur.com/nWn4t0M.jpg View Quote Details, is that the same case w/ different cuts of foam? What kind of foam? Nice work. |
|
|
[#17]
Originally Posted By PoopdeckPappy:
The first one is an IM3100. The rest of them are all the same IM3200 with different pieces of foam. The foam is 4 lb. cross linked polyethylene machined from 4' x 8' sheets on a CNC router. The router gives us control over the depth of the cuts. http://i.imgur.com/eSTPYl9.jpg View Quote View All Quotes View All Quotes Originally Posted By PoopdeckPappy:
Originally Posted By DustinS:
Details, is that the same case w/ different cuts of foam? What kind of foam? Nice work. The first one is an IM3100. The rest of them are all the same IM3200 with different pieces of foam. The foam is 4 lb. cross linked polyethylene machined from 4' x 8' sheets on a CNC router. The router gives us control over the depth of the cuts. http://i.imgur.com/eSTPYl9.jpg Do you sell that as a service? |
|
"A free people ought not only to be armed, but disciplined..." - George Washington
|
[#18]
|
|
|
[Last Edit: Pitbull410]
[#19]
That is badass, I love it. Do you need to be a FFL so that you can legally receive firearms shipped to you to have this done? Or would it have to be only in person locally?
|
|
|
[#20]
Originally Posted By Pitbull410:
That is badass, I love it. Do you need to be a FFL so that you can legally receive firearms shipped to you to have this done? Or would it have to be only in person locally? View Quote I assume yes. We would need a FFL to receive a firearm in the mail, and we don't have one. At least not yet, but we have talked about getting one for this application. We could probably work something out with another FFL, but that would add to the cost... |
|
|
[#21]
|
|
|
[#23]
|
|
|
[#24]
|
|
|
[#25]
Originally Posted By PoopdeckPappy:
The first one is an IM3100. The rest of them are all the same IM3200 with different pieces of foam. The foam is 4 lb. cross linked polyethylene machined from 4' x 8' sheets on a CNC router. The router gives us control over the depth of the cuts. http://i.imgur.com/eSTPYl9.jpg View Quote View All Quotes View All Quotes Originally Posted By PoopdeckPappy:
Originally Posted By DustinS:
Details, is that the same case w/ different cuts of foam? What kind of foam? Nice work. The first one is an IM3100. The rest of them are all the same IM3200 with different pieces of foam. The foam is 4 lb. cross linked polyethylene machined from 4' x 8' sheets on a CNC router. The router gives us control over the depth of the cuts. http://i.imgur.com/eSTPYl9.jpg I really like the denser foam, what brand/model/part number is that foam if you don't mind sharing? and where can I get it? |
|
""Surely something must be terribly wrong with a man who seems to be far more concerned with a Jew building a house in Israel than with a Muslim building a nuclear bomb in Iran."
|
[#26]
Originally Posted By Willz:
I really like the denser foam, what brand/model/part number is that foam if you don't mind sharing? and where can I get it? View Quote Armacell OleTex BKJN400 should be the same thing, but I'd probably go with the 2 lb BKJN200. We were using the 4 lb stuff for our prototypes because we had some left over from another project. |
|
|
[#27]
Originally Posted By PoopdeckPappy:
Armacell OleTex BKJN400 should be the same thing, but I'd probably go with the 2 lb BKJN200. We were using the 4 lb stuff for our prototypes because we had some left over from another project. View Quote View All Quotes View All Quotes Originally Posted By PoopdeckPappy:
Originally Posted By Willz:
I really like the denser foam, what brand/model/part number is that foam if you don't mind sharing? and where can I get it? Armacell OleTex BKJN400 should be the same thing, but I'd probably go with the 2 lb BKJN200. We were using the 4 lb stuff for our prototypes because we had some left over from another project. Thank you |
|
""Surely something must be terribly wrong with a man who seems to be far more concerned with a Jew building a house in Israel than with a Muslim building a nuclear bomb in Iran."
|
[#28]
|
|
|
[#29]
Originally Posted By cccpNyC:
Pelican case foam done. will adjust as I add rear sight and butt pad. http://i219.photobucket.com/albums/cc284/cccpNyC/0915161959_zpsqqpcfmfn.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162022_zpsrdefk9hy.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162023_zpsnfgyuaba.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162023a_zpswoei5jdj.jpg used this... Proxxon 37080 hot wire cutter https://images-na.ssl-images-amazon.com/images/I/41SlTIVv2SL._SX466_.jpg It was a very shallow learning curve, as long as you take your time, works great. Now I gotta finish up my other 1650 case I got off Amazon for $75 View Quote Nice case, but ima need a link to your mag dump video... |
|
Fear makes companions of us all.
|
[#30]
Originally Posted By Orracle:
Nice case, but ima need a link to your mag dump video... View Quote View All Quotes View All Quotes Originally Posted By Orracle:
Originally Posted By cccpNyC:
Pelican case foam done. will adjust as I add rear sight and butt pad. http://i219.photobucket.com/albums/cc284/cccpNyC/0915161959_zpsqqpcfmfn.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162022_zpsrdefk9hy.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162023_zpsnfgyuaba.jpg http://i219.photobucket.com/albums/cc284/cccpNyC/0915162023a_zpswoei5jdj.jpg used this... Proxxon 37080 hot wire cutter https://images-na.ssl-images-amazon.com/images/I/41SlTIVv2SL._SX466_.jpg It was a very shallow learning curve, as long as you take your time, works great. Now I gotta finish up my other 1650 case I got off Amazon for $75 Nice case, but ima need a link to your mag dump video... Linky for pew pew video |
|
|
[#31]
|
|
|
[#33]
Originally Posted By PoopdeckPappy:
Not a Pelican but a $30 Rigid case from Home Depot. http://i.imgur.com/t6ZQaVW.jpg http://i.imgur.com/13Fqw2p.jpg View Quote I saw those there the other day and was thinking the same thing |
|
-ReD
Firefighter/Paramedic |
[#34]
I'm in need of a custom foam insert for a military case. Who do you guys recommend?
|
|
|
[#35]
Originally Posted By DOG556:
I'm in need of a custom foam insert for a military case. Who do you guys recommend? View Quote shallow learning curve. plus you will be proud you did it yourself Hot wire doo dad |
|
|
[#36]
|
|
|
[#37]
|
|
|
[#38]
Originally Posted By Pitbull410:
Originally Posted By cccpNyC:
Pelican case foam done. will adjust as I add rear sight and butt pad. Now I gotta finish up my other 1650 case I got off Amazon for $75 Link?! To the build? Build thread To the case? Amazon warehouse deal gotta search and be quick |
|
|
[#39]
Originally Posted By cccpNyC:
shallow learning curve. plus you will be proud you did it yourself https://images-na.ssl-images-amazon.com/images/I/41SlTIVv2SL._SX425_.jpg Hot wire doo dad View Quote View All Quotes View All Quotes Originally Posted By cccpNyC:
Originally Posted By DOG556:
I'm in need of a custom foam insert for a military case. Who do you guys recommend? shallow learning curve. plus you will be proud you did it yourself https://images-na.ssl-images-amazon.com/images/I/41SlTIVv2SL._SX425_.jpg Hot wire doo dad You can make one too for way less. I dont remember where but someone posted plans somewhere. power supply from radio shack, $25. Rheostat from clearance table at HD, like $3. gotta get the special wire, found on ebay for $8. I had the wires and scrap wood at the house. |
|
-ReD
Firefighter/Paramedic |
[#40]
Originally Posted By DOG556: I'm in need of a custom foam insert for a military case. Who do you guys recommend? View Quote |
|
Everyone loves free speech until they actually hear it.
|
[#41]
View Quote View All Quotes View All Quotes Originally Posted By itchytrigger: Originally Posted By DOG556: I'm in need of a custom foam insert for a military case. Who do you guys recommend? (Waiting on the new barrel to break the case in.) |
|
|
[#42]
Originally Posted By Tigers1363:
Had a case for an Uzi made....its is absolutely top-notch. Could not be happier with it. (Waiting on the new barrel to break the case in.) View Quote View All Quotes View All Quotes Originally Posted By Tigers1363:
Originally Posted By itchytrigger:
Originally Posted By DOG556:
I'm in need of a custom foam insert for a military case. Who do you guys recommend? (Waiting on the new barrel to break the case in.) So, how would it work if you don't live in TX? |
|
"A free people ought not only to be armed, but disciplined..." - George Washington
|
[#43]
Originally Posted By bcauz3y:
So, how would it work if you don't live in TX? View Quote View All Quotes View All Quotes Originally Posted By bcauz3y:
Originally Posted By Tigers1363:
Originally Posted By itchytrigger:
Originally Posted By DOG556:
I'm in need of a custom foam insert for a military case. Who do you guys recommend? (Waiting on the new barrel to break the case in.) So, how would it work if you don't live in TX? What he asked^^ Do you trace out the layout and send it to them? |
|
|
[#44]
|
|
|
[#45]
Ive got a 1750 and soft case inbound. What locks are you guys using? Not TSA/ air travel ones, but car travel, and want to lock both ends? Run of the mill Master locks?
|
|
|
[#46]
|
|
-ReD
Firefighter/Paramedic |
[#47]
Three things:
1) To the poster asking about locks...If you are using your case to fly, never use travel/TSA locks. Always use a standard padlock. The TSA does not want access to your weapons. In every experience I have had flying with rifles, the following occurs: you declare your firearms at the ticket counter, then you will take them over to the TSA baggage Xray. If they need to look in the case, they will ask you to open it. At no time are you to surrender the key for the locks. Again, always use standard locks. 2) In going with the flying theme, a poster stated that he no longer uses the foam. If you are flying with an optic equipped firearm, that can be a bad thing. You need max protection for your weapon. I work at a major airport and have seen what happens to baggage once it goes down the 'rabbit hole' behind the ticket counter. It is not pretty. I have seen bags fall off the baggage train and be subsequently run over by trailing vehicles (especially at night). It is not a regular occurrence, but it does happen and murphy sez it will happen to you when you are going on a once-in-a-lifetime hunt or whatever. If you don't fly, no worries. If you do, protect that weapon. 3) FYI on Custom made foam... I am currently awaiting the arrival of some custom made foam for my Pelican 1700. The foam is being cut by a company called My Case Builder. Their site has an online, do-it-yourself CAD program, allowing you to design your own foam. You input the case model that it is for and go from there. You can design from scratch, use pre-selected shapes, or, upload a photo of the case contents and use that as a template. Lastly, the price is on par with other foam makers (and you do not have to send tracings). They offer an 'insurance' of $7.99, so if you made an error, send the foam back (with needed corrections noted) and they will send an updated foam sheet back to you. As for price, I ordered a high density polyethylene foam set (the real dense stuff) and egg crate lid foam for $162 (including shipping and the oops insurance). I will post pics here when it arrives (first or send week of Jan). |
|
|
[#48]
Originally Posted By mo4040:
Three things: 1) To the poster asking about locks...If you are using your case to fly, never use travel/TSA locks. Always use a standard padlock. The TSA does not want access to your weapons. In every experience I have had flying with rifles, the following occurs: you declare your firearms at the ticket counter, then you will take them over to the TSA baggage Xray. If they need to look in the case, they will ask you to open it. At no time are you to surrender the key for the locks. Again, always use standard locks. 2) In going with the flying theme, a poster stated that he no longer uses the foam. If you are flying with an optic equipped firearm, that can be a bad thing. You need max protection for your weapon. I work at a major airport and have seen what happens to baggage once it goes down the 'rabbit hole' behind the ticket counter. It is not pretty. I have seen bags fall off the baggage train and be subsequently run over by trailing vehicles (especially at night). It is not a regular occurrence, but it does happen and murphy sez it will happen to you when you are going on a once-in-a-lifetime hunt or whatever. If you don't fly, no worries. If you do, protect that weapon. 3) FYI on Custom made foam... I am currently awaiting the arrival of some custom made foam for my Pelican 1700. The foam is being cut by a company called My Case Builder. Their site has an online, do-it-yourself CAD program, allowing you to design your own foam. You input the case model that it is for and go from there. You can design from scratch, use pre-selected shapes, or, upload a photo of the case contents and use that as a template. Lastly, the price is on par with other foam makers (and you do not have to send tracings). They offer an 'insurance' of $7.99, so if you made an error, send the foam back (with needed corrections noted) and they will send an updated foam sheet back to you. As for price, I ordered a high density polyethylene foam set (the real dense stuff) and egg crate lid foam for $162 (including shipping and the oops insurance). I will post pics here when it arrives (first or send week of Jan). View Quote Looking forward to seeing how that comes out for you |
|
|
[#49]
|
|
|
[#50]
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.