User Panel
Posted: 3/23/2017 11:46:48 AM EDT
What would you guys recommend for my pistol build? Not sure if I want a birdcage, flash can or a linear comp.....
|
|
Quoted:
What would you guys recommend for my pistol build? Not sure if I want a birdcage, flash can or a linear comp..... View Quote Well....this is a decision you have to make. It's your gun. . |
|
I'm thinking of getting a flash can personally, I was also considering the Phase 5 Littleboy muzzle brake.
|
|
Either nothing or something to mount a suppressor (Tri-lug).
Don't need a flash hider on a 9mm as there is no flash to hide (ie. don't have flash hiders on 9mm handguns). If you just want something to look cool/different or whatever, then pick whatever you like the look of. |
|
Its a 9mm, there is gas exiting...but your not going to benefit from a good compensator. Put what ever you want on it to look good. I have a simple birdcage on mine with an Indian Creek blast deflector. The Indian creek deflector is the least expensive, it looks good and it works with what ever flash suppressor that you have. Good luck and post a picture when your done
|
|
I swap out between a flash can and my suppressor on mine.
The flash can is big enough to torque on and off with one hand, so I like that. Also, with my 8.5" barrel, pressures are so low when the bullet leaves the barrel that adding a flash can makes it sound like you're shooting a .22 rifle from the shooter's perspective. |
|
I have a Kaw Valley Linear Comp in 1/2 x 28.
Worst case I can get something else and put it on a 5.56 AR Pistol. I like it though, it added just enough length on my build to ease my mind. (5.5" barrel with 5.5" handguard) Also its in between the KAK Can Micro and KAK Can Slim length. Melonited too! |
|
Thread protector - all I ever use on Rimfire and Pistol Calibers
MHO, YMMV, etc. |
|
|
Quoted:
I have the Kaw Valley XL linear comp. Finally got to shoot it today and it was nice and quiet. There was a very noticeable up/right muzzle rise with each shot that I wasn't expecting but I don't see how the linear comp could have anything to do with that. https://snag.gy/N9H4pF.jpg View Quote |
|
This is the only thing left I need to buy for my 9mm build. Haven't found anything I like with a 1/2x28 thread
|
|
|
Quoted:
This is the only thing left I need to buy for my 9mm build. Haven't found anything I like with a 1/2x28 thread View Quote It's real small and I think it looks better than a thread protector. Gary |
|
|
Carlson Mini Comp.
Didn't want to use a plain ol' thread protector, and a 9mm suppressor just isn't in the cards for me at the moment. So I found the smallest muzzle brake I could find that was still 1/2x28 and big enough for 9mm. Landed on the Carlson. |
|
Quoted:
Either nothing or something to mount a suppressor (Tri-lug). Don't need a flash hider on a 9mm as there is no flash to hide (ie. don't have flash hiders on 9mm handguns). If you just want something to look cool/different or whatever, then pick whatever you like the look of. View Quote |
|
Quoted:
Either nothing or something to mount a suppressor (Tri-lug). Don't need a flash hider on a 9mm as there is no flash to hide (ie. don't have flash hiders on 9mm handguns). If you just want something to look cool/different or whatever, then pick whatever you like the look of. View Quote I think I want to put this on mine. It's threaded 1/2x28 Hk mp5 3 lug adapter https://www.hkparts.net/shop/pc/HK-3-Lug-Adapter-1-2-X-28-6p106.htm But before I buy, there's no reason this shouldn't work fine right? |
|
I am working on finishing a 5.5" PSA 9mm Glock build, still need a hand guard and muzzle device. I want to swap between my muzzle device and supressor like you do, I have an AAC EVO9. What muzzle device are you using that allows you to remove by hand for the swap?
|
|
|
Besides appearance is there any performance difference between say a Kak flash can and the KVP XL linear comp?
|
|
I was thinking about putting the Texas Black Rifle Glock Micro Comp on my 9mm build. Has anyone tried this?
https://tbrci.com/product/tbrci-glock-micro-comp-v3/ |
|
A1 bird cage, doesn't need to be timed which is important 'cause it's only handtight. I shoot almost exclusively suppressed so the A1 is my thread protector.
|
|
|
my 10.5" 9mm came with a KAK flash can... relatively quiet with just ear plugs from behind the gun
|
|
|
These guys http://www.max-11.com/ have a few options for muzzle devices in 1/2 x 28/ I bought the A1 type and the Bull Nose Thread Protector, 1/2-28 Thread as well.
Bull nose A1 |
|
Quoted:
Thread protector. There's a company called Xtreme Precision that sells them for $7.99 shipped on Amazon and they're top notch. No need to add the extra cost/length/weight of a flash hider or muzzle brake on a 9mm, unless you just like the look. https://images-na.ssl-images-amazon.com/images/I/81fT4-NU-OL._AC_UL320_SR240,320_.jpg View Quote It was tough to screw on the muzzle, probably a combination of the finish on the threads of both the barrel and thread protector. I had to thread it on a little, back it out, and then thread it on a little more a few times. After doing that, it screws on and off easily now. |
|
KAK Flash Can. Cheap and effective. I wish I could find something about an inch longer though, say 4.5" long, thats not a fake suppressor.
|
|
|
|
Quoted:
This is the way I'm leaning I think I want to put this on mine. It's threaded 1/2x28 Hk mp5 3 lug adapter https://www.hkparts.net/shop/pc/HK-3-Lug-Adapter-1-2-X-28-6p106.htm But before I buy, there's no reason this shouldn't work fine right? View Quote Sloppy as a summer penguin. |
|
Quoted:
Kak makes a 5" flash can but only with 1/2-28 threads. View Quote View All Quotes View All Quotes |
|
Quoted:
KVP linear comp XL is, Overall Length: 4.125 Inches View Quote View All Quotes View All Quotes Quoted:
Quoted:
KAK Flash Can. Cheap and effective. I wish I could find something about an inch longer though, say 4.5" long, thats not a fake suppressor. KVP XL |
|
View Quote |
|
I had a 1/2x28 threaded lightweight, nitride barrel and was struggling to find something that would work. I finally picked up a flash hider from rousch sports. Nice looking piece and they had several options. Later on I found more options from other vendors like spikes and tornado tech.
|
|
Quoted:
Hmm, I wonder if that could be opened up and re-threaded to 1/2-36? View Quote https://www.kakindustry.com/ar-15-parts/upper-parts/barrels/barrel-parts/flash-hiders-and-muzzle-breaks/kak-industry-extended-1-2-36-flash-can |
|
Nice. Never saw that before.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.