User Panel
|
Anyone who has one, what do you use for the overall length for the Form 1 submission??? Assuming standard M4 type 6-postion stock.
And, I assume the end of the barrel is the important part, not the rail if it sticks out past the barrel (?) For the 5" TROS 3 lug. |
|
|
Quoted:
Anyone who has one, what do you use for the overall length for the Form 1 submission??? Assuming standard M4 type 6-postion stock. And, I assume the end of the barrel is the important part, not the rail if it sticks out past the barrel (?) For the 5" TROS 3 lug. View Quote From guntrustlawyer.com: 4f should contain the overall length of the firearm. (For a Suppressor use the overall length of the Suppressor) (If there is a folding stock or collapsible stock, the measurement should be made with the stock fully extended) |
|
Quoted:
From guntrustlawyer.com: 4f should contain the overall length of the firearm. (For a Suppressor use the overall length of the Suppressor) (If there is a folding stock or collapsible stock, the measurement should be made with the stock fully extended) View Quote That just muddies the water!! OK, length to barrel, and I'll build it with no handguards, and then add them later after the initial "build" (?) Since I don't know what had guards I would be getting anyway. Also, for folks who have TROS barrels, how are they for accuracy? Are they good barrels? |
|
Im pretty sure the suppressor part is if you are building a suppressor on a Form 1.
As far as my approved Form 1 OAL with this TROS barrel once it arrives is: 21.5 OAL with 5" barrel. BUT I am using a LWRC UCIW...So add a few inches for a full size stock/tube. |
|
Thanks, I wasn't thinking of the suppressor part in (), more the OAL. But after I replied I realized that it must be the end of the barrel since things like removable muzzle devices don't count.
|
|
|
I asked TROS about length:
"I have barrels in process now. Should go to black oxide early next week, then laser engraving and then start shipping the following week. The OAL will usually be determined by the handguard as most people use a standard CAR length handguard that covers the barrel." Still don't know what to put on my Form 1 Once they ship, if he has any in stock I'll get one. |
|
Quoted:
I asked TROS about length: "I have barrels in process now. Should go to black oxide early next week, then laser engraving and then start shipping the following week. The OAL will usually be determined by the handguard as most people use a standard CAR length handguard that covers the barrel." Still don't know what to put on my Form 1 Once they ship, if he has any in stock I'll get one. View Quote Did he just send you that? I'm getting really sick of this...I got the same email before. According to it, they should be shipping this week. Now he's saying two more weeks? Come on!! |
|
|
I hear you. If I had known when I ordered this (End of June) I would still be waiting for it in February, I would have gone another route.
|
|
|
Quoted:
Im about ready to explode over this guys business tactics.... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Sent Friday, yesterday. Im about ready to explode over this guys business tactics.... It's thread that made me buy the Griffin 3 lug mount and Rocksett it on my 9mm upper instead of ordering one from TROS. Glad I did, it works like a charm. |
|
I've emailed 3 or 4 times and never heard back, does this guy not like money?
|
|
Quoted:
It's thread that made me buy the Griffin 3 lug mount and Rocksett it on my 9mm upper instead of ordering one from TROS. Glad I did, it works like a charm. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Sent Friday, yesterday. Im about ready to explode over this guys business tactics.... It's thread that made me buy the Griffin 3 lug mount and Rocksett it on my 9mm upper instead of ordering one from TROS. Glad I did, it works like a charm. I did the exact same thing. |
|
Quoted:
I've emailed 3 or 4 times and never heard back, does this guy not like money? View Quote I have got 1 e-mail response from him since June. The rest of the info I have has come from this thread. I am going to start calling and e-mailing until I get a response. I will let you all know if/when I hear anything. |
|
Quoted:
I have got 1 e-mail response from him since June. The rest of the info I have has come from this thread. I am going to start calling and e-mailing until I get a response. I will let you all know if/when I hear anything. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I've emailed 3 or 4 times and never heard back, does this guy not like money? I have got 1 e-mail response from him since June. The rest of the info I have has come from this thread. I am going to start calling and e-mailing until I get a response. I will let you all know if/when I hear anything. Good luck. He selectively replies to my emails. |
|
I'm convinced that they are made by carbide toothed beavers (union), and the local has gone on strike.
|
|
|
Just sent $$ to buy an adapter from Mark a week ago. Now I wonder how long this adapter would be finished. Didn't ask him how long it takes. If I have read this thread ahead of time, I'd reconsidered this route. |
|
Quoted:
Just sent $$ to buy an adapter from Mark a week ago. Now I wonder how long this adapter would be finished. Didn't ask him how long it takes. If I have read this thread ahead of time, I'd reconsidered this route. View Quote Maybe you will get lucky with the adapters. Im waiting on the barrel |
|
I ordered two adapters from him in November or December and got them pretty quickly.
|
|
|
Here is the e-mail response I just got-
"In process now. Should got to black oxide later this week, then laser engraving to start shipping late next week." So the saga (with few details) continues...... |
|
Quoted:
Here is the e-mail response I just got- "In process now. Should got to black oxide later this week, then laser engraving to start shipping late next week." So the saga (with few details) continues...... View Quote Same bull**** response each week. Has anyone spoke with him on the phone? Vs this email back and forth nonsense |
|
I emailed Mark today and he said that they should be shipping this Friday and early next week
|
|
|
|
|
View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Tempted to order another one. Wouldn't be surprised if he maxed out already on the build and puts you on the "next batch" http://www.louiselyonsauthor.com/wp-content/uploads/2015/10/homer-simpson-doh-400x288.jpg Not trying to be a downer...hahah. I just dont trust what he says anymore...I was told a 8-12 weeks from June. So... |
|
Update:
"Yes, I'm running behind and then had to add 50 barrels to the run. They're at black oxide now. Should go to laser engraving later this week to start shipping Friday or Monday." Everyone getting in last minute....won't have to wait over 7+ months....I hate you...lol |
|
Too bad he isn't up front with everyone and say he only does a single run each year because that's what he has done for the last 2-3 years. some people wait 6 mos and some wait 2 weeks. all depends on when you order...
|
|
Quoted:
Too bad he isn't up front with everyone and say he only does a single run each year because that's what he has done for the last 2-3 years. some people wait 6 mos and some wait 2 weeks. all depends on when you order... View Quote Ya but I am more upset that he finally gets the run going. Sets a deadline. ADDS 50 more!? I understand making profit but come on. |
|
"Currently scheduled to start shipping late next week."
Got his email tonight 021416 |
|
|
|
"Still at engraving. He had some issues, not related to the barrels. Monday - Tuesday of next week."
|
|
|
Quoted:
Sadly...I am really hoping it ships this time... ive had 3 Form 1's and a suppressor stamp return in the time I have been waiting View Quote View All Quotes View All Quotes Quoted:
Quoted:
And the saga continues. Sadly...I am really hoping it ships this time... ive had 3 Form 1's and a suppressor stamp return in the time I have been waiting Bloody hell. Still? |
|
|
Quoted:
Sadly...I am really hoping it ships this time... ive had 3 Form 1's and a suppressor stamp return in the time I have been waiting View Quote View All Quotes View All Quotes Quoted:
Quoted:
And the saga continues. Sadly...I am really hoping it ships this time... ive had 3 Form 1's and a suppressor stamp return in the time I have been waiting Well that's a first, the ATF is faster. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.