New 9mm Bolt - Has anyone used this? - Page 1

AR Sponsor:

Site Notices

[ARCHIVED THREAD] - New 9mm Bolt - Has anyone used this?

Posted: 5/23/2015 8:04:40 PM EDT

Or new to me at least.

I found this posted today as a dealer link on slickguns. In the description it says that it is cut to accept glock or colt mage.

http://armil-spec.com/collections/ar9-parts/products/ar9-bolt-carrier-group-mpi

Posted: 5/25/2015 3:51:13 PM EDT

[#1]

Not seeing where it says anything about Glock.

Posted: 5/25/2015 4:50:15 PM EDT

[#2]

tag for any info on this, that price is vary appealing and seeing that they have barrels i'm considering pulling the trigger barring info

Edit: looking at their facebook page, someone stated that they have spotty CS and probably should be avoided

Posted: 5/25/2015 5:02:25 PM EDT

[#3]

http://armil-spec.com/collections/ar9-parts/products/ar9-bolt-carrier-group-mpi

Posted: 5/25/2015 6:26:03 PM EDT

[#4]

What the hell. I ordered one

Edit: Well I tried to order one. Wouldn't take my credit card, AMEX or VISA. And I just ordered a 9mm Upper from Orion Guns here

Since the OP's vendor wouldn't take my credit card, I found this one instead here

Posted: 5/25/2015 6:37:07 PM EDT

[#5]

Quote History

Quoted:
what the hell. I ordered one

View Quote

let us know what you get

Posted: 5/25/2015 9:24:05 PM EDT

[#6]

I was able to order one and got an email confirmation. So we shall see what happens.

Posted: 5/25/2015 10:13:46 PM EDT

[#7]

Quote History

Quoted:
Not seeing where it says anything about Glock.

View Quote

The description page on the slickguns.com dealer posting said compatible with glock mags.

Posted: 5/26/2015 1:39:53 AM EDT

[#8]

Quote History

Quoted:
What the hell. I ordered one
Edit: Well I tried to order one. Wouldn't take my credit card, AMEX or VISA. And I just ordered a 9mm Upper from Orion Guns here
Since the OP's vendor wouldn't take my credit card, I found this one instead here

View Quote

The one from Mas Defense looks like the CMMG. It is one piece with internal weight vs a 2 piece with an removable rear weight. I prefer the one piece. Price looks good but they are OOS. I am looking forward to photos of it.

MAHA

Posted: 5/26/2015 6:52:31 AM EDT

[#9]

I got one from MAS Def a few weeks ago, runs great in my 9mm "pistol". When I asked them about spare parts (firing pin/extractor), they suggested CMMG kit so no worries of odd ball design

In case you guys need it, here is the 9mm bolt parts kit from Brownells: http://www.brownells.com/rifle-parts/receiver-parts/parts-kits/repair-parts-kits/ar-15-m16-mk9-9mm-bolt-rehab-kit-prod65677.aspx

Posted: 5/26/2015 8:54:39 AM EDT

[#10]

Quote History

Quoted:
I got one from MAS Def a few weeks ago, runs great in my 9mm "pistol". When I asked them about spare parts (firing pin/extractor), they suggested CMMG kit so no worries of odd ball design

In case you guys need it, here is the 9mm bolt parts kit from Brownells: http://www.brownells.com/rifle-parts/receiver-parts/parts-kits/repair-parts-kits/ar-15-m16-mk9-9mm-bolt-rehab-kit-prod65677.aspx

View Quote

Is it ramped and is it cut to work with Glock mags?

Posted: 5/26/2015 2:22:59 PM EDT

[#11]

Quote History

Quoted:

Is it ramped and is it cut to work with Glock mags?

View Quote View All Quotes

View All Quotes

Quote History

Quoted:

Quoted:
I got one from MAS Def a few weeks ago, runs great in my 9mm "pistol". When I asked them about spare parts (firing pin/extractor), they suggested CMMG kit so no worries of odd ball design

In case you guys need it, here is the 9mm bolt parts kit from Brownells: http://www.brownells.com/rifle-parts/receiver-parts/parts-kits/repair-parts-kits/ar-15-m16-mk9-9mm-bolt-rehab-kit-prod65677.aspx

Is it ramped and is it cut to work with Glock mags?

Even if its not, 10 minutes with a dremel (if you take it slow) will get the job done just fine. Finish it up with a fine grit wheel then cold blue it. I am not the most adept or patient person out there, but I got a deal on a 9mm bolt that was not cut to accept Glock mags, so I just did it myself. Can't tell the difference between my job and a factory job.

Posted: 5/27/2015 1:30:56 PM EDT

[#12]

Just received a ship notice from them so hopefully will have this by friday

Posted: 5/29/2015 10:48:06 AM EDT

[#13]

Well Here is the photos sorry but only phone pics

Posted: 5/29/2015 1:15:28 PM EDT

[#14]

Looks like the PSA bolt.

MAHA

Posted: 5/29/2015 5:49:09 PM EDT

[#15]

It's ramped.

Posted: 6/1/2015 8:49:08 PM EDT

[#16]

did you try it yet?

Posted: 6/2/2015 12:12:46 AM EDT

[#17]

Same here, how does it perform and fit? I just bought a MAS Defense $129 memorial day sale. Great bolt but had to shape/shape/lap /polish to fit correctly in my pre-ban colt, tested 10rounds in semi worked great, then flicked switch on tac-con 3mr trigger with slide fire stock and empty mag in seconds. Flawless performance. But after that, decided not to beat up my colt and just pickup a shot 9mm brl to pin 5-6in flashhider on to but said parts in and beat-up.

Posted: 6/21/2015 12:31:08 PM EDT

[#18]

bump for rr

Posted: 6/21/2015 8:24:23 PM EDT

[#19]

If you have one of these.....I can cut them for glock mags for $40 and it includes return shipping.by priority mail.
Rudy

Posted: 6/21/2015 8:40:55 PM EDT

[#20]

I am still waiting on a tax stamp. Upper is assembled but haven't fired it yet

Posted: 6/21/2015 11:33:56 PM EDT

[#21]

I bought one of the MAS Defense bolts over memorial weekend. Used it in my cheap ebay barrel build. It was very very tight upon assembly but I didn't have any issues with it at the range. After about about 150rds, it now slides freely in the upper.

Posted: 6/25/2015 9:41:38 AM EDT

[#22]

Quote History

Quoted:
Well Here is the photos sorry but only phone pics
<a href="http://s445.photobucket.com/user/robandeb123/media/9mm/20150529_093415_resized.jpg.html" target="_blank">http://i445.photobucket.com/albums/qq173/robandeb123/9mm/20150529_093415_resized.jpg</a>
<a href="http://s445.photobucket.com/user/robandeb123/media/9mm/20150529_093407_resized.jpg.html" target="_blank">http://i445.photobucket.com/albums/qq173/robandeb123/9mm/20150529_093407_resized.jpg</a>
<a href="http://s445.photobucket.com/user/robandeb123/media/9mm/20150529_093345_resized_1.jpg.html" target="_blank">http://i445.photobucket.com/albums/qq173/robandeb123/9mm/20150529_093345_resized_1.jpg</a>
<a href="http://s445.photobucket.com/user/robandeb123/media/9mm/20150529_093326_resized.jpg.html" target="_blank">http://i445.photobucket.com/albums/qq173/robandeb123/9mm/20150529_093326_resized.jpg</a>

View Quote

To me, this doesn't look like it is cut to accept Glock mags.

Booger123 can you confirm?

Posted: 6/25/2015 10:07:44 AM EDT

[#23]

I am pretty sure it is not cut for glock mags but not 100%

Posted: 6/25/2015 12:18:19 PM EDT

[#24]

I can confirm 100% it is not cut for Glock mags.......

Posted: 7/10/2015 6:07:01 PM EDT

[#25]

Quote History

Quoted:
I am still waiting on a tax stamp. Upper is assembled but haven't fired it yet

View Quote

I'm interested in buying one of this, did you have a chance to go to the range?

Posted: 7/13/2015 11:50:49 AM EDT

[#26]

I will be going to range this evening my tax stamp came back yesterday, and hope to give her a try this evening.

Posted: 7/13/2015 5:14:34 PM EDT

[#27]

Well got to range today. Bolt seemed to function ok but I am getting a failure to feed about every third round over multiple magazines. Leaving the crescent moon mark on the round that is hanging up. May be that I am using the cheap pro-mag block. Hope to get yo range this weekend and do some more shooting with it. After a hood cleaning and relube.

Posted: 7/13/2015 9:53:25 PM EDT

[#28]

Quote History

Quoted:
Well got to range today. Bolt seemed to function ok but I am getting a failure to feed about every third round over multiple magazines. Leaving the crescent moon mark on the round that is hanging up. May be that I am using the cheap pro-mag block. Hope to get yo range this weekend and do some more shooting with it. After a hood cleaning and relube.

View Quote

I can make it run with what you have.....just mod the barrel......

Posted: 7/31/2015 8:18:46 PM EDT

[#29]

Well I finally got to the range with this gun tonight after having mad- machinist due his thing to it.
All I can say is this thing run like a sewing machine. I have four ASC 32 round mags and I have two of the cheap plastic pro mags.
This is an Anderson lower
Anderson upper no forward assist
Pro mag mag block
eBay 7.5 barrel
Cheaper bolt in the beginning of this thread
eBay 7 inch quad rail
Sdta muzzle device
Lower is NFA SBR
Soon to file for form 1 suppressor for this gun as well
But it ate everything I fed it from perfecta to federal to cci aluminum I even mixed and matched rounds in the mags something I never do. And it chewed it all up
Mad machinist delivered on his promise. To make it run couldn't believe a small modification like that could do so well.

Posted: 8/1/2015 12:10:16 AM EDT

[#30]

Glad I could help......we are working on having uppers on the shelf and in stock in 9MM and 40 almost finished programming the new lathe for profiling barrels.......it will hold the barrel between centers and turn the entire OD in one setup......providing more accuracy for the shooter as all operations on the barrel are machined off centerline....

Posted: 8/7/2015 10:41:59 PM EDT

[#31]

Just a follow up to this been to the range couple more times now with this gun.
Have even started using lead round nose 125 grain reloads of mine in it. Everything is functioning normally.
The pro mag block is performing great. The asc magazines are doing well and the bolt is functioning great as well.
I have put about 500 to 800 rounds thru it in the last week and leave smiling. Just need to form 1 me a suppressor for this gun now and I will really be pleased.
If you have questions for me ask away and I will do my best to answer.

Posted: 8/8/2015 1:31:34 AM EDT

[#32]

Thanks for the report. I have a want for a 9mm AR. I have bought the mag block from AMM-ARMS. Thats as far as I have gotten.
Its on the back burner. I dont have a lower for it yet or the other parts for that matter.
Any info on what you opened up to make it run better? Throat the barrel?

Posted: 8/8/2015 6:56:47 AM EDT

[#33]

That is mad machinists area there but I can see that he changed the bevel of the face of the barrel.

Posted: 8/8/2015 10:24:58 AM EDT

[#34]

Quote History

Quoted:
Thanks for the report. I have a want for a 9mm AR. I have bought the mag block from AMM-ARMS. Thats as far as I have gotten.
Its on the back burner. I dont have a lower for it yet or the other parts for that matter.
Any info on what you opened up to make it run better? Throat the barrel?

View Quote

Shoot me an email...I can provide complete uppers....uppers without a forearm or a barrel bolt combo.......

Posted: 8/27/2015 9:14:09 PM EDT

[#35]

Quoted:
Or new to me at least.

I found this posted today as a dealer link on slickguns. In the description it says that it is cut to accept glock or colt mage.

http://armil-spec.com/collections/ar9-parts/products/ar9-bolt-carrier-group-mpi

View Quote

This is on sale for 92.00 bucks now and it has worked great for me
Fs911 for free shipping code just received in email

Posted: 8/27/2015 10:36:06 PM EDT

[#36]

looks like they stopped carrying the glock cut ones.

http://wshbt.amkal.servertrust.com/category-s/114.htm

and they changed their url.

[ARCHIVED THREAD] - New 9mm Bolt - Has anyone used this?

AR-15 » Rimfire and Pistol Calibers

AR Sponsor:

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us