User Panel
User Panel
User Panel
|
Posted: 2/2/2016 4:17:07 PM EDT
[#1]
Quote HistoryOriginally Posted By on1tyr:
Good eye. It's actually not tightened down in that pic as I had it disassembled to replace the dust cover with a 9mm gas deflector and to measure a few things for my new upper build. I use an old detachable carry handle to align it with the upper when tightening it down. Quote HistoryOriginally Posted By on1tyr:
I would stick a level on your rail. It doesn't look aligned with the upper. Like the muzzle end is higher. Good eye. It's actually not tightened down in that pic as I had it disassembled to replace the dust cover with a 9mm gas deflector and to measure a few things for my new upper build. I use an old detachable carry handle to align it with the upper when tightening it down. If you look at the picture of the gun above your post with the Apex handguard, you'll notice the same thing. That hanguard is made to be off center like that. It's possible your handguard is designed the same way. |
|
|
|
VA, USA
|
Posted: 2/2/2016 4:41:46 PM EDT
[#2]
Quote HistoryOriginally Posted By VBC:
If you look at the picture of the gun above your post with the Apex handguard, you'll notice the same thing. That hanguard is made to be off center like that. It's possible your handguard is designed the same way. Quote HistoryOriginally Posted By VBC:
Originally Posted By on1tyr:
I would stick a level on your rail. It doesn't look aligned with the upper. Like the muzzle end is higher. Good eye. It's actually not tightened down in that pic as I had it disassembled to replace the dust cover with a 9mm gas deflector and to measure a few things for my new upper build. I use an old detachable carry handle to align it with the upper when tightening it down. If you look at the picture of the gun above your post with the Apex handguard, you'll notice the same thing. That hanguard is made to be off center like that. It's possible your handguard is designed the same way. It's a Samson Evolution 10" rail. I don't think it's off center once tightened down. I'll double check when I have a minute. |
|
|
CA, USA
|
Posted: 2/4/2016 3:21:43 AM EDT
[Last Edit: DVS]
[#3]
My California 80% 9mm Bullet Button Pistol. ASC 10/32 mag All Colt 9mm SMG kit, 80% lower and Shockwave blade
All Colt 9mm Rifle kit with California mods. Pistol grip wrap and A2 style muzzle break with 10/32 mag on a Hi-Standard lower. 
|
|
|
MO, USA
|
Posted: 2/4/2016 11:08:13 AM EDT
[#4]
Quote HistoryOriginally Posted By DVS:
My California 80% 9mm Bullet Button Pistol. ASC 10/32 mag All Colt 9mm SMG kit, 80% lower and Shockwave blade http://i13.photobucket.com/albums/a291/DVS762/IMG_20160203_231603_462_zpsyub5m4oz.jpg All Colt 9mm Rifle kit with California mods. Pistol grip wrap and A2 style muzzle break with 10/32 mag on a Hi-Standard lower. http://i13.photobucket.com/albums/a291/DVS762/IMG_20151005_143323_025_zpsjnnxjnit.jpg What is a pistol grip wrap? Looks unusual. I am guessing that it is so you can't grip the firearm as well? CA rules? |
|
|
|
Posted: 2/4/2016 1:46:26 PM EDT
[#5]
Quote HistoryOriginally Posted By cdavid:
http://<a href=http://i1045.photobucket.com/albums/b454/cdavid320/20160120_150516_zpsr9gwlipb.jpg</a>" /> http://<a href=http://i1045.photobucket.com/albums/b454/cdavid320/20160120_150359_zpstpdk5fm6.jpg</a>" /> http://<a href=http://i1045.photobucket.com/albums/b454/cdavid320/20160120_150426_zpsvrxvjq4w.jpg</a>" /> Joe Bob Outfitter's (JBO) Spartan 9mm lower Matrix side charging upper from JBO Socom 9mm barrel from JBO Fortis Switch rail Timney 3lb single stage trigger JP enhanced bolt JP silent captured spring assembly Magpul SL stock That is SICK. Nice job, love the side charging upper. 
|
|
|
|
|
Posted: 2/4/2016 1:48:30 PM EDT
[#6]
Quote HistoryOriginally Posted By on1tyr:
Today: http://wct097.com/wt/guns/sbr/9mm/9mm-complete.jpg Building a second upper and will be making these changes: 4.5" barrel (down from 7.5") 4" rail, down from 10" MOE SL-K stock I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? |
|
|
|
CA, USA
|
Posted: 2/4/2016 2:30:10 PM EDT
[#7]
Quote HistoryOriginally Posted By HYRYSC:
What is a pistol grip wrap? Looks unusual. I am guessing that it is so you can't grip the firearm as well? CA rules? Quote HistoryOriginally Posted By HYRYSC:
Originally Posted By DVS:
My California 80% 9mm Bullet Button Pistol. ASC 10/32 mag All Colt 9mm SMG kit, 80% lower and Shockwave blade http://i13.photobucket.com/albums/a291/DVS762/IMG_20160203_231603_462_zpsyub5m4oz.jpg All Colt 9mm Rifle kit with California mods. Pistol grip wrap and A2 style muzzle break with 10/32 mag on a Hi-Standard lower. http://i13.photobucket.com/albums/a291/DVS762/IMG_20151005_143323_025_zpsjnnxjnit.jpg What is a pistol grip wrap? Looks unusual. I am guessing that it is so you can't grip the firearm as well? CA rules? exactly..California says a pistol grip is something to wrap the web of your thumb around..so no wrap around and its not a pistol grip...stupid laws here..doesnt reduce crime but messes with legal firearm owners. |
|
|
OK, USA
|
Posted: 2/4/2016 7:17:11 PM EDT
[#8]
Quote HistoryOriginally Posted By TheDevilYouLove:
I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? Quote HistoryOriginally Posted By TheDevilYouLove:
Originally Posted By on1tyr:
Today: http://wct097.com/wt/guns/sbr/9mm/9mm-complete.jpg Building a second upper and will be making these changes: 4.5" barrel (down from 7.5") 4" rail, down from 10" MOE SL-K stock I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? I'm really fond of the SLR handguards. |
|
|
MN, USA
|
Posted: 2/5/2016 12:49:44 AM EDT
[#9]
Quote HistoryOriginally Posted By TheDevilYouLove:
I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? Quote HistoryOriginally Posted By TheDevilYouLove:
Originally Posted By on1tyr:
Today: http://wct097.com/wt/guns/sbr/9mm/9mm-complete.jpg Building a second upper and will be making these changes: 4.5" barrel (down from 7.5") 4" rail, down from 10" MOE SL-K stock I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? Ive got a Guntec 4" and I'm liking it so far |
|
|
|
Posted: 2/5/2016 10:41:00 AM EDT
[#10]
Quote HistoryOriginally Posted By jason248:
Ive got a Guntec 4" and I'm liking it so far Quote HistoryOriginally Posted By jason248:
Originally Posted By TheDevilYouLove:
Originally Posted By on1tyr:
Today: http://wct097.com/wt/guns/sbr/9mm/9mm-complete.jpg Building a second upper and will be making these changes: 4.5" barrel (down from 7.5") 4" rail, down from 10" MOE SL-K stock I'm on the lookout for a 4" rail and not finding much. Which one are you looking at? Ive got a Guntec 4" and I'm liking it so far Thanks for the tip on the Guntec - I've been looking for a DD Lite 4.0 for months, and I'm giving up. I want to get this build done! |
|
|
|
MO, USA
|
Posted: 2/5/2016 11:34:41 AM EDT
[#11]
Quote HistoryOriginally Posted By DVS:
exactly..California says a pistol grip is something to wrap the web of your thumb around..so no wrap around and its not a pistol grip...stupid laws here..doesnt reduce crime but messes with legal firearm owners. Quote HistoryOriginally Posted By DVS:
Originally Posted By HYRYSC:
Originally Posted By DVS:
My California 80% 9mm Bullet Button Pistol. ASC 10/32 mag All Colt 9mm SMG kit, 80% lower and Shockwave blade http://i13.photobucket.com/albums/a291/DVS762/IMG_20160203_231603_462_zpsyub5m4oz.jpg All Colt 9mm Rifle kit with California mods. Pistol grip wrap and A2 style muzzle break with 10/32 mag on a Hi-Standard lower. http://i13.photobucket.com/albums/a291/DVS762/IMG_20151005_143323_025_zpsjnnxjnit.jpg What is a pistol grip wrap? Looks unusual. I am guessing that it is so you can't grip the firearm as well? CA rules? exactly..California says a pistol grip is something to wrap the web of your thumb around..so no wrap around and its not a pistol grip...stupid laws here..doesnt reduce crime but messes with legal firearm owners. Well at least your 9mm pistol has that bullet button that lets you push a button to make it full auto  . Without that, life would suck right?
|
|
|
VA, USA
|
Posted: 2/5/2016 12:03:00 PM EDT
[#12]
Quote HistoryOriginally Posted By jason248:
Ive got a Guntec 4" and I'm liking it so far I bought the Guntec as well. Was the only 4" I could find and it's actually a little longer than the 4.5" barrel since 9mm is shorter due to no barrel extension. I haven't installed them on an upper yet, but it looks to me as though the 4.5" barrel will be recessed about 0.25" under the handguard. It's also got a smaller ID than my Samson rail, but I think the rear cap of my can will still fit under the rail. It'll be tight though. I was worried when I first saw it that I'd have to get a longer barrel or shorter rail just to thread the can on. Now I'm thinking I should get a 3-lug adapter and mount rather than the 1/2-36 direct thread mount. That might actually push the effective end of the barrel past the handguard. |
|
|
|
Posted: 2/5/2016 10:08:08 PM EDT
[#13]
Quote HistoryOriginally Posted By on1tyr:
I bought the Guntec as well. Was the only 4" I could find and it's actually a little longer than the 4.5" barrel since 9mm is shorter due to no barrel extension. I haven't installed them on an upper yet, but it looks to me as though the 4.5" barrel will be recessed about 0.25" under the handguard. It's also got a smaller ID than my Samson rail, but I think the rear cap of my can will still fit under the rail. It'll be tight though. I was worried when I first saw it that I'd have to get a longer barrel or shorter rail just to thread the can on. Now I'm thinking I should get a 3-lug adapter and mount rather than the 1/2-36 direct thread mount. That might actually push the effective end of the barrel past the handguard. Quote HistoryOriginally Posted By on1tyr:
Originally Posted By jason248:
Ive got a Guntec 4" and I'm liking it so far I bought the Guntec as well. Was the only 4" I could find and it's actually a little longer than the 4.5" barrel since 9mm is shorter due to no barrel extension. I haven't installed them on an upper yet, but it looks to me as though the 4.5" barrel will be recessed about 0.25" under the handguard. It's also got a smaller ID than my Samson rail, but I think the rear cap of my can will still fit under the rail. It'll be tight though. I was worried when I first saw it that I'd have to get a longer barrel or shorter rail just to thread the can on. Now I'm thinking I should get a 3-lug adapter and mount rather than the 1/2-36 direct thread mount. That might actually push the effective end of the barrel past the handguard. The muzzle of the 4.5" is slightly recessed, or the shoulder of the threading is? |
|
|
|
TX, USA
|
Posted: 2/6/2016 1:51:49 PM EDT
[#14]
|
|
|
|
Posted: 2/7/2016 1:59:42 PM EDT
[#15]
You don't have to have that grip "wrap" in California. Our only restrictions are a "cal bullet button" and 10 round limit on mags
|
|
|
|
NY, USA
|
Posted: 2/7/2016 2:08:05 PM EDT
[#16]
Quote HistoryOriginally Posted By cdavid:
You don't have to have that grip "wrap" in California. Our only restrictions are a "cal bullet button" and 10 round limit on mags But if you make it "featureless" you dont need a bullet button, right? |
|
|
CA, USA
|
Posted: 2/7/2016 5:03:43 PM EDT
[#17]
exactly..thats why I have a grip wrap and muzzle break so I can have a featureless rifle and use evil mags if I like...the pistol is bullet button mag release..
|
|
|
FL, USA
|
Posted: 2/8/2016 2:32:34 PM EDT
[Last Edit: 19richie66]
[#18]
|
|
|
NY, USA
|
Posted: 2/8/2016 2:48:39 PM EDT
[#19]
Quote HistoryOriginally Posted By 19richie66:
Here is my Angstadt Arms rifle I built from his receiver set. I also used his 16" barrel. Went with a Macon Armory bolt & buffer, older Bomarc handguard, regular A2 flash hider for now. Has a BCM grip, MOE stock, MBUS sights. Trying to find a B5 gripstop for it and it will be done. <a href="http://s140.photobucket.com/user/jeep93/media/AR9.jpg.html" target="_blank">http://i140.photobucket.com/albums/r9/jeep93/AR9.jpg</a> <a href="http://s140.photobucket.com/user/jeep93/media/AR%209.jpg.html" target="_blank">http://i140.photobucket.com/albums/r9/jeep93/AR%209.jpg</a> Rifle looks great richie, cant wait to hear range report. |
|
|
|
Posted: 2/9/2016 4:30:39 PM EDT
[#20]
Quote HistoryOriginally Posted By transam7969:
<a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg</a> <a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg</a> Who makes the muzzle device? Looking for one in 1/2x28 but only see it in 1/2x36 |
|
|
|
|
Posted: 2/9/2016 5:11:36 PM EDT
[#21]
Quote HistoryOriginally Posted By Gdirty5:
Who makes the muzzle device? Looking for one in 1/2x28 but only see it in 1/2x36 Quote HistoryOriginally Posted By Gdirty5:
Originally Posted By transam7969:
<a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg</a> <a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg</a> Who makes the muzzle device? Looking for one in 1/2x28 but only see it in 1/2x36 kakindustry.com They make a regular and slim, see below. Places like Joe Bobs will have them cheaper and I believe KAK has a Amazon account with free shipping. Aero makes them as well in 1/2x28. KAK 1/2x28 Flash Can KAK Slim Flash Can 1/2x28 |
|
|
|
USA
|
Posted: 2/9/2016 5:34:09 PM EDT
[Last Edit: HarrishMasher]
[#22]
Quote HistoryOriginally Posted By transam7969:
<a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091331_zpsdwr46sla.jpg</a> <a href="http://smg.photobucket.com/user/02blackws679ta/media/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg.html" target="_blank">http://img.photobucket.com/albums/v228/02blackws679ta/Mobile%20Uploads/2016-02/20160206_091408_zps0ccmxhfe.jpg</a> Can anyone tell me if this is a stock or pistol brace? Who makes it? |
|
|
USA
|
Posted: 2/9/2016 5:35:14 PM EDT
[Last Edit: HarrishMasher]
[#23]
Quote HistoryOriginally Posted By transam7969:
 Can anyone tell me if this is a stock or pistol brace? It looks interesting and looks good too! Can someone tell me who makes it? Link? |
|
|
TX, USA
|
Posted: 2/9/2016 7:04:53 PM EDT
[#24]
http://www.thordsencustoms.com/ar-ak-enhanced-pistol-cheek-rest-kit-w-caa-saddle-black/
|
|
|
USA
|
Posted: 2/9/2016 8:43:59 PM EDT
[#25]
Quote HistoryOriginally Posted By Knownot:
http://www.thordsencustoms.com/ar-ak-enhanced-pistol-cheek-rest-kit-w-caa-saddle-black/ Thanks!!! |
|
|
|
Posted: 2/9/2016 11:07:56 PM EDT
[#26]
This thread is not helping me and my having a hard time not affording parts right now.
|
|
|
|
FL, USA
|
Posted: 2/10/2016 8:24:53 AM EDT
[#27]
Quote HistoryOriginally Posted By gotuonpaper:
This thread is not helping me and my having a hard time not affording parts right now. I was in the same boat. Because of this thread I doubled my budget and then added an optic. |
|
|
|
Posted: 2/10/2016 9:09:59 AM EDT
[#28]
Quote HistoryOriginally Posted By GZ1:
I was in the same boat. Because of this thread I doubled my budget and then added an optic. Quote HistoryOriginally Posted By GZ1:
Originally Posted By gotuonpaper:
This thread is not helping me and my having a hard time not affording parts right now. I was in the same boat. Because of this thread I doubled my budget and then added an optic. Oh I don't really have a budget. I research parts and get the best I can afford. I just can't afford much right now. 
|
|
|
|
PA, USA
|
Posted: 2/13/2016 9:53:37 AM EDT
[#29]
|
|
|
TX, USA
|
Posted: 2/13/2016 10:28:01 AM EDT
[#30]
|
|
|
|
Posted: 2/13/2016 2:06:31 PM EDT
[#31]
Quote HistoryOriginally Posted By arjohnson:
<a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpsarqo6xtu.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpsarqo6xtu.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpsxfuh2g1c.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpsxfuh2g1c.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zps0egvyea2.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zps0egvyea2.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpshjmlmos8.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpshjmlmos8.jpg</a> man... you have to SBR that thing |
|
|
|
PA, USA
|
Posted: 2/13/2016 5:57:39 PM EDT
[Last Edit: arjohnson]
[#32]
Quote HistoryOriginally Posted By eternal24k:
man... you have to SBR that thing Quote HistoryOriginally Posted By eternal24k:
Originally Posted By arjohnson:
<a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpsarqo6xtu.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpsarqo6xtu.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpsxfuh2g1c.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpsxfuh2g1c.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zps0egvyea2.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zps0egvyea2.jpg</a> <a href="http://smg.photobucket.com/user/arjohnson/media/Mobile%20Uploads/image_zpshjmlmos8.jpg.html" target="_blank">http://img.photobucket.com/albums/v441/arjohnson/Mobile%20Uploads/image_zpshjmlmos8.jpg</a> man... you have to SBR that thing Waiting on Form 1 , just got receiver engraved today.
|
|
|
|
Posted: 2/14/2016 5:32:56 AM EDT
[#33]
How do you get the closest barrel thread shoulder with a rail without it going under? what size rail do you get with your barrel? 1" smaller rail? (4" rail with 5" barrel, 7" rail with 8" barrel) Or is it half inch smaller rail?
Thanks |
|
|
|
PA, USA
|
Posted: 2/14/2016 9:45:35 AM EDT
[#34]
Quote HistoryOriginally Posted By joshv06:
How do you get the closest barrel thread shoulder with a rail without it going under? what size rail do you get with your barrel? 1" smaller rail? (4" rail with 5" barrel, 7" rail with 8" barrel) Or is it half inch smaller rail? Thanks With the 9mm your barrel will have to be one inch longer than rail. My gun pictured has a 7" rail, if I wanted the shoulder exposed I'd need a 8" barrel. |
|
|
KY, USA
|
Posted: 2/14/2016 12:22:50 PM EDT
[Last Edit: bhd1223]
[#35]
Quote HistoryOriginally Posted By joshv06: How do you get the closest barrel thread shoulder with a rail without it going under? what size rail do you get with your barrel? 1" smaller rail? (4" rail with 5" barrel, 7" rail with 8" barrel) Or is it half inch smaller rail? Thanks I'm planning on building a 5.5" upper with a side charger in the future, but still run a "7 inch" rail. I would use one of the flash cans or a KXx to get beyond the rail just barely, in preparation for suppressing it, which would come at a later time when I feel like dealing with all the paperwork and fees and whatnot. Keep in mind, the ID of your rail would limit what suppressor would fit under it. It sounds like you're trying to avoid that? |
|
|
PA, USA
|
Posted: 2/16/2016 4:27:15 PM EDT
[Last Edit: steve_010]
[#36]
My pictures don't work :-/ QC10 Colt 9mm lower QC10 ramped bolt PSA LPK B5 systems stock metalform magazines JP systems 9mm Silent Captured Spring standard charging handle VLTOR MUR 1S upper QC10 5.5" threaded barrel Aimpoint PRO standard barrel but KNS gen 2 mod 2 anti-rotation pins Wilson Combat T.R.I.M. handguard Barking Spider 2 AAC Ti-Rant 9 |
|
|
VA, USA
|
Posted: 2/16/2016 8:17:04 PM EDT
[#37]
Quote HistoryOriginally Posted By nickforney:
<a href="http://s273.photobucket.com/user/nickforney/media/50FAAF8E-8F6C-4717-86B7-2CDAB138CC25.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/50FAAF8E-8F6C-4717-86B7-2CDAB138CC25.jpg</a> What are the specs on the upper, length? That's awesome. Thanks |
|
|
TN, USA
|
Posted: 2/21/2016 8:56:10 PM EDT
[#38]
|
|
|
|
Posted: 2/21/2016 9:08:43 PM EDT
[#39]
finally got around to making a mag holster for my 9mm carbine. cant wait to run this in the next carbine match
|
|
|
|
|
Posted: 2/21/2016 9:12:47 PM EDT
[#40]
Nice builds!
Anyone know where I can pick up 2-3 SMG mags without paying a ton? |
|
|
|
|
Posted: 2/21/2016 9:14:54 PM EDT
[#41]
Quote HistoryOriginally Posted By HALFNATTYGAINZ:
Nice builds! Anyone know where I can pick up 2-3 SMG mags without paying a ton? Palmetto State Armory has metalform 9mm mags for 19.99 each. |
|
|
|
|
Posted: 2/21/2016 9:19:04 PM EDT
[#42]
Quote HistoryOriginally Posted By lsujim:
Palmetto State Armory has metalform 9mm mags for 19.99 each. Quote HistoryOriginally Posted By lsujim:
Originally Posted By HALFNATTYGAINZ:
Nice builds! Anyone know where I can pick up 2-3 SMG mags without paying a ton? Palmetto State Armory has metalform 9mm mags for 19.99 each. Thanks, I got a few parts on the way. I still need some mags, a upper receiver and a BCG. Damn this thing is going to be fun! 
|
|
|
|
OH, USA
|
Posted: 2/29/2016 10:24:12 PM EDT
[#43]
Upper Matrix Arms Side Charger New Frontier Armory Modular BCG 5.5” Ballistic Advantage 9mm barrel w/Griffin Armament 3-lug Guntec 4” Quad Rail Lower Joe Bob Spartan 9mm Glock Lower Ergo Deluxe Tactical Grip CMC Tactical 3.5lb Flat Trigger CMC Anti-Walk Pins KAK Shockwave Buffer Tube KAK Shockwave Blade BCM QD Endplate Joe Bob Castle Nut KAK 9mm Buffer New Frontier Armory Buffer Spacer Carbine Buffer Spring Miscellaneous small parts I had laying around Optics, Mags, and Suppressor ETS 31rnd Mags Primary Arms RGB-II Micro Dot Larue Tactical LT-660HK QD Riser Griffin Armament Optimus w/3-lug adapter
Future Plans HK Front Sight HK Drum Rear Sight SBR paperwork already filed, probably going the MVB Arc Stock route once approved |
|
|
|
Posted: 3/1/2016 9:19:50 PM EDT
[#44]
my humble submission
 " />
gonna need a LOT more 9mm |
|
|
|
|
Posted: 3/4/2016 11:23:14 PM EDT
[#45]
 shitty mockup til I get my stamp back. Foregrip and stock are NOT installed. |
|
|
|
WA, USA
|
Posted: 3/11/2016 10:31:53 PM EDT
[#46]
|
|
|
FL, USA
|
Posted: 3/12/2016 3:33:39 PM EDT
[#47]
|
|
|
|
Posted: 3/15/2016 2:39:03 PM EDT
[#48]
Quote HistoryOriginally Posted By legion07:
my humble submission http://<a href=http://i130.photobucket.com/albums/p243/tweak666_photos/IMG_1142_zpsjijwgha3.jpg</a>" /> gonna need a LOT more 9mm What lower is that? |
|
|
|
|
Posted: 3/15/2016 3:35:32 PM EDT
[#49]
Quote HistoryOriginally Posted By robertmegar:
What lower is that? Quote HistoryOriginally Posted By robertmegar:
Originally Posted By legion07:
my humble submission http://<a href=http://i130.photobucket.com/albums/p243/tweak666_photos/IMG_1142_zpsjijwgha3.jpg</a>" /> gonna need a LOT more 9mm What lower is that? Quarter Circle 10 Colt Mag |
|
|
|
|
Posted: 3/15/2016 4:23:55 PM EDT
[#50]
Quote HistoryOriginally Posted By BigMan74: Quarter Circle 10 Colt Mag Quote HistoryOriginally Posted By BigMan74: Originally Posted By robertmegar: Originally Posted By legion07: my humble submission http://<a href=http://i130.photobucket.com/albums/p243/tweak666_photos/IMG_1142_zpsjijwgha3.jpg</a>" /> gonna need a LOT more 9mm What lower is that? Quarter Circle 10 Colt Mag Don't think it's the QC10, it follows the lines of a forged lower. Most likely the Black Creek Precision EF9. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
