User Panel
Posted: 11/13/2015 2:03:49 PM EDT
2A BL-RAIL M-LOK 10"
http://2a-armament.myshopify.com/products/bl-rail-m-lok?variant=4744340803 The 2A Armament™ BL RAIL M-LOK series was designed as a lightweight rail solution utilizing proven traditional 6061 extrusion, and titanium as the foundation. The BL RAIL series of rails features the same lightening cuts found on the popular BALIOS-lite receiver sets. When the two are combined, a seamless look is achieved across the top of the firearm. The BL RAIL is just as capable on any quality forged or billet upper receiver offered from other manufacturers as well. By utilizing a titanium barrel nut, and an innovative 45 degree mounting system, the BL RAIL achieves a solid lockup with the upper receiver. The 2A Armament BL RAIL will ship with a 6AL-4V titanium barrel nut. An optional aluminum barrel nut is offered as a separate item for those looking to save maximum weight on a build. Features: Made from U.S.A. Certified 6061 Extrusion U.S.A. Certified 6AL-4V Titanium barrel nut as standard M-LOK mounting solution Mil-Spec hardcoat black anodized Free floating design 1.3” Internal Diameter 10” Rail with Titanium nut and hardware (weight 7.05oz)(2A-BLRML-10) MSRP: $219 Available on our website, and shipping to dealers now. These have been optimized to work perfectly with a 10.5" barrel! Thanks ARFCOM for working with us to get this right for folks. 10.5" BALIOS-lite complete upper on a Colt 6920 lower half. |
|
Holy crap!!!! You guys are on a roll this week
Is the fluted RE/buffer tube next? Cheers Shannon |
|
|
Looks like you changed up your MLok slots a bit since your earliest versions. Curious to why you made the change.
|
|
Quoted:
Looks like you changed up your MLok slots a bit since your earliest versions. Curious to why you made the change. View Quote They mentioned this in their picture thread. If I remember correctly, Magpul asked them not to have customized slots, because they didn't want other companies (especially those without the precision manufacturing background that 2A has) to customize them, too. Basically, they were worried that it might result in some customized slots (not 2A's, since they worked perfectly) not functioning as well, which could hurt the reputation of the system. Or something like that. All newly produced rails have the flush slots without the lip around them. It was an aesthetic detail designed to highlight 2A's abilities, not a functional one. |
|
Quoted:
They mentioned this in their picture thread. If I remember correctly, Magpul asked them not to have customized slots, because they didn't want other companies (especially those without the precision manufacturing background that 2A has) to customize them, too. Basically, they were worried that it might result in some customized slots (not 2A's, since they worked perfectly) not functioning as well, which could hurt the reputation of the system. Or something like that. All newly produced rails have the flush slots without the lip around them. It was an aesthetic detail designed to highlight 2A's abilities, not a functional one. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Looks like you changed up your MLok slots a bit since your earliest versions. Curious to why you made the change. They mentioned this in their picture thread. If I remember correctly, Magpul asked them not to have customized slots, because they didn't want other companies (especially those without the precision manufacturing background that 2A has) to customize them, too. Basically, they were worried that it might result in some customized slots (not 2A's, since they worked perfectly) not functioning as well, which could hurt the reputation of the system. Or something like that. All newly produced rails have the flush slots without the lip around them. It was an aesthetic detail designed to highlight 2A's abilities, not a functional one. That is exactly correct. Ryan |
|
|
|
Quoted:
Quoted:
Quoted:
Looks like you changed up your MLok slots a bit since your earliest versions. Curious to why you made the change. They mentioned this in their picture thread. If I remember correctly, Magpul asked them not to have customized slots, because they didn't want other companies (especially those without the precision manufacturing background that 2A has) to customize them, too. Basically, they were worried that it might result in some customized slots (not 2A's, since they worked perfectly) not functioning as well, which could hurt the reputation of the system. Or something like that. All newly produced rails have the flush slots without the lip around them. It was an aesthetic detail designed to highlight 2A's abilities, not a functional one. That is exactly correct. Ryan The shop gun has the old rail on it...You know which one I'm grabbing when I build mine. |
|
Quoted:
you win 10 internetz for putting the giant mlok logo on the bottom of the rail instead of the sides like everyone else http://www.reactiongifs.us/wp-content/uploads/2013/08/picard_clapping.gif View Quote Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. |
|
Quoted:
Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. View Quote View All Quotes View All Quotes Quoted:
Quoted:
you win 10 internetz for putting the giant mlok logo on the bottom of the rail instead of the sides like everyone else http://www.reactiongifs.us/wp-content/uploads/2013/08/picard_clapping.gif Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. you and I could be friends......just saying i wish more of those offering the mlok would do what you are doing, this rail is now in my top 3 for my SBR build |
|
|
Quoted:
I bought one of these before this newer updated version (mine has the aesthetic milling around the M-Loks) but am unable to use it with my Syrac Piston due to the channel under the top rail being too thin. The .410 width in this image is too large to fit inside the handguard. As such, my beautiful handguard sits on the shelf.... waiting..... View Quote If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. |
|
Quoted:
If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I bought one of these before this newer updated version (mine has the aesthetic milling around the M-Loks) but am unable to use it with my Syrac Piston due to the channel under the top rail being too thin. The .410 width in this image is too large to fit inside the handguard. As such, my beautiful handguard sits on the shelf.... waiting..... If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. |
|
Quoted:
Quoted:
Quoted:
I bought one of these before this newer updated version (mine has the aesthetic milling around the M-Loks) but am unable to use it with my Syrac Piston due to the channel under the top rail being too thin. The .410 width in this image is too large to fit inside the handguard. As such, my beautiful handguard sits on the shelf.... waiting..... If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. I suppose I'd rather see it on a rifle then my shelf... Mine is the 12" version, not the 10". The barrel nut was installed once, the handguard never got put on. In it's original box with instructions. If you want it, PM me. |
|
Quoted:
I suppose I'd rather see it on a rifle then my shelf... Mine is the 12" version, not the 10". The barrel nut was installed once, the handguard never got put on. In it's original box with instructions. If you want it, PM me. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
I bought one of these before this newer updated version (mine has the aesthetic milling around the M-Loks) but am unable to use it with my Syrac Piston due to the channel under the top rail being too thin. The .410 width in this image is too large to fit inside the handguard. As such, my beautiful handguard sits on the shelf.... waiting..... If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. I suppose I'd rather see it on a rifle then my shelf... Mine is the 12" version, not the 10". The barrel nut was installed once, the handguard never got put on. In it's original box with instructions. If you want it, PM me. 12" is what I am really looking for. PM sent. |
|
Quoted:
12" is what I am really looking for. PM sent. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
I bought one of these before this newer updated version (mine has the aesthetic milling around the M-Loks) but am unable to use it with my Syrac Piston due to the channel under the top rail being too thin. The .410 width in this image is too large to fit inside the handguard. As such, my beautiful handguard sits on the shelf.... waiting..... If you decide that you need to buy something else to use with your Syrac, I could help you fund that purchase by buying the 2A BL rail. I suppose I'd rather see it on a rifle then my shelf... Mine is the 12" version, not the 10". The barrel nut was installed once, the handguard never got put on. In it's original box with instructions. If you want it, PM me. 12" is what I am really looking for. PM sent. Not to completely derail this thread, but I wanted to thank Dayton64 and since it's not an EE thread, I can't do it officially. He sold me the "first run" rail for an extremely reasonable price (less than most places charge for a current one) and sent it very quickly. The rail is soooooooo nice. Obviously, the current ones are great, but those little details around the M-Lok slots are icing on the cake. |
|
Any update on if the newer version will fit the syrac/superlative gas piston block noted above. Ready to pull the trigger but really want to try a piston kit in shorty build.
|
|
Very nice. Out of curiosity, what kind of weight savings do you get by milling out the picatinny lands?
|
|
Quoted:
Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. View Quote View All Quotes View All Quotes Quoted:
Quoted:
you win 10 internetz for putting the giant mlok logo on the bottom of the rail instead of the sides like everyone else http://www.reactiongifs.us/wp-content/uploads/2013/08/picard_clapping.gif Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. For the love of all that's holy, thank you. |
|
How is that compliant with the M-Lok standard?
The flat in front of the m-lok slot closest to the end of the barrel is not .300, which is the flat requirement. This is discernible from the picture because the flat between the slots is .300 per the mlok standard, and the flat in front of the slots is clearly not as big as the one between. |
|
Well this went over like a fart in church! Total fail (even enough so that we all agree).
Fail. Fail. Fail. Fart in church. Fail. Ugly as shit. Fail. Idiotic grip to receiver fit (has ZERO blending of grip to trigger guard). FAIL. No one asked for an aluminum grip (for good reason). FAIL. An A2 style, seriously?.. what is this,.. 2001?.....FAIL. Ok... I'm done chipping in with the hate. |
|
Quoted:
Well this went over like a fart in church! Total fail (even enough so that we all agree). Fail. Fail. Fail. Fart in church. Fail. Ugly as shit. Fail. Idiotic grip to receiver fit (has ZERO blending of grip to trigger guard). FAIL. No one asked for an aluminum grip (for good reason). FAIL. An A2 style, seriously?.. what is this,.. 2001?.....FAIL. Ok... I'm done chipping in with the hate. View Quote Wrong thread? |
|
Quoted:
Quoted:
Well this went over like a fart in church! Total fail (even enough so that we all agree). Fail. Fail. Fail. Fart in church. Fail. Ugly as shit. Fail. Idiotic grip to receiver fit (has ZERO blending of grip to trigger guard). FAIL. No one asked for an aluminum grip (for good reason). FAIL. An A2 style, seriously?.. what is this,.. 2001?.....FAIL. Ok... I'm done chipping in with the hate. Wrong thread? What in the!!! Oh! Meh, lets keep it here anyhow. Ryan |
|
Quoted:
How is that compliant with the M-Lok standard? The flat in front of the m-lok slot closest to the end of the barrel is not .300, which is the flat requirement. This is discernible from the picture because the flat between the slots is .300 per the mlok standard, and the flat in front of the slots is clearly not as big as the one between. View Quote I believe the .300 is slot to slot. The end of the rail would accommodate a full M-LOK accessory as they are designed to be butted up to each other within that .300. I will shoot an E-mail to Drake and see what he says however! Thanks! Ryan |
|
Quoted:
What in the!!! Oh! Meh, lets keep it here anyhow. Ryan View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Well this went over like a fart in church! Total fail (even enough so that we all agree). Fail. Fail. Fail. Fart in church. Fail. Ugly as shit. Fail. Idiotic grip to receiver fit (has ZERO blending of grip to trigger guard). FAIL. No one asked for an aluminum grip (for good reason). FAIL. An A2 style, seriously?.. what is this,.. 2001?.....FAIL. Ok... I'm done chipping in with the hate. Wrong thread? What in the!!! Oh! Meh, lets keep it here anyhow. Ryan Yeah, that design was like the polar-opposite of a 2A design. You guys are all win, win, win, while that grip was (as noted above) all fail, fail, fail. |
|
Quoted:
Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. View Quote View All Quotes View All Quotes Quoted:
Quoted:
you win 10 internetz for putting the giant mlok logo on the bottom of the rail instead of the sides like everyone else http://www.reactiongifs.us/wp-content/uploads/2013/08/picard_clapping.gif Thanks... I hate markings overall, so we try to keep some of them small, and out of the way. I am that guy who buys an FX4 Ford pickup, and peels the FX4 sticker off the side of the bed before driving it off the lot. I thought I was the only one that did that. My 2000 F250 4X4 had the big "4X4" sticker on the side of the bed. Made the dealer remove it before delivery. I also will not let them attach any dealer logos or license plate frame. Unless they want to pay me for the advertising space. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.