User Panel
User Panel
User Panel
|
Posted: 3/14/2014 1:30:12 PM EDT
[#1]
Quote HistoryQuoted:
Patiently waiting. GB is on the side and able to be added to the cart showing unavailable. 9pm EST they go live Thank you ! |
|
|
|
Posted: 3/14/2014 2:26:57 PM EDT
[#2]
Quote HistoryQuoted:
You are referring to the gen1,Syrac has a new Gen 2 out, i have one, They both have Click detent and work the same with different parts, SLR has the better system.Syrac was the smallest .750 clamp on that was out,Until the SLR Sentry 7 Series comes out friday. The SLR Sentry has the better system with the way the detent works i think and it's gotta be lighter. Friday Damm thats today. eta-content Quote HistoryQuoted:
Quoted:
Quoted:
Can anyone tell me the pros and cons of this Adj. GB vs the Syrac? Click detent, no brass set screw to wear out after several adjustments and have to tighten down from the back of the block, which in most cases would require removing the gas block or handguard. You are referring to the gen1,Syrac has a new Gen 2 out, i have one, They both have Click detent and work the same with different parts, SLR has the better system.Syrac was the smallest .750 clamp on that was out,Until the SLR Sentry 7 Series comes out friday. The SLR Sentry has the better system with the way the detent works i think and it's gotta be lighter. Friday Damm thats today. eta-content Yeah brainfart, I was thinking about the Seekins block, not the Syrac. 
|
|
|
|
Posted: 3/14/2014 7:36:16 PM EDT
[#3]
Quote HistoryQuoted:
9pm EST they go live Thank you ! Quote HistoryQuoted:
Quoted:
Patiently waiting. GB is on the side and able to be added to the cart showing unavailable. 9pm EST they go live Thank you ! My cc is doing a burnout! |
|
|
|
Posted: 3/14/2014 8:42:21 PM EDT
[#4]
Quote HistoryQuoted:
My cc is doing a burnout! Quote HistoryQuoted:
Quoted:
Quoted:
Patiently waiting. GB is on the side and able to be added to the cart showing unavailable. 9pm EST they go live Thank you ! My cc is doing a burnout! Kick the tires and light the fires boys! It's about FO time. 
|
|
|
|
Posted: 3/14/2014 9:02:21 PM EDT
[#5]
Quote HistoryQuoted:
Kick the tires and light the fires boys! It's about FO time.
Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Patiently waiting. GB is on the side and able to be added to the cart showing unavailable. 9pm EST they go live Thank you ! My cc is doing a burnout! Kick the tires and light the fires boys! It's about FO time.
Yep Sorry for the crappy pic I'll take some good shots in the daylight tomorrow |
|
|
|
Posted: 3/14/2014 9:07:37 PM EDT
[#6]
Todd, IM sent to you just now.
|
|
|
|
Posted: 3/15/2014 12:21:37 AM EDT
[#7]
Received my Sentry .750 SS today and wow it is small. Love it. Going on my current project next weekend. I also order two of SLR's non adjustable micro GB's and they are damn near as small and they give you two for one. Thanks SLR
|
|
|
|
Posted: 3/15/2014 2:05:49 PM EDT
[#8]
Is like to se a pic of these mounted up!
We are going to be offering 3 more sizes of 2mm ball drivers here in the next week to help out the ones with gas blocks more than 4" under the HG. Todd |
|
|
|
Posted: 3/15/2014 6:47:02 PM EDT
[#9]
Some pics.
SA7-C 
SA7-S and SA7-C 
SA9-C 
SA9-S 
SA7 13" Solo 3G BA Kuuma 12.5" Middy 
|
|
|
|
Posted: 3/15/2014 7:52:56 PM EDT
[#10]
What size is the adjustment wrench? BTW got my two in. One is installed and will hopefully get to the range this weekend.
  |
|
|
|
Posted: 3/15/2014 7:58:14 PM EDT
[#11]
Cilp from 2 post above yours.
"We are going to be offering 3 more sizes of 2mm ball drivers here in the next week to help out the ones with gas blocks more than 4" under the HG." 
|
|
|
|
Posted: 3/15/2014 8:12:39 PM EDT
[#12]
Quote HistoryQuoted: Cilp from 2 post above yours. "We are going to be offering 3 more sizes of 2mm ball drivers here in the next week to help out the ones with gas blocks more than 4" under the HG."  |
|
|
|
Posted: 3/16/2014 6:08:18 PM EDT
[#13]
Ordered a Sentry 7 :)
|
|
|
|
Posted: 3/16/2014 8:02:27 PM EDT
[#14]
Will the extended driver/adjustment wrenches be included with our order if selected at the time of checkout for those of us that run pistol length gas systems and handguards 12in and up?
|
|
|
|
Posted: 3/16/2014 8:32:59 PM EDT
[#15]
Quote HistoryQuoted:
Will the extended driver/adjustment wrenches be included with our order if selected at the time of checkout for those of us that run pistol length gas systems and handguards 12in and up? No not even close. You'll need the foot long wrench Should be back in stock this week |
|
|
|
Posted: 3/16/2014 9:33:30 PM EDT
[#16]
Quote HistoryQuoted:
Ordered a Sentry 7 :) As did I! :):):) |
|
|
|
Posted: 3/16/2014 11:24:19 PM EDT
[#17]
I wonder how many were ordered Friday night?
|
|
|
|
Posted: 3/17/2014 3:44:18 PM EDT
[#18]
Quote HistoryQuoted:
I wonder how many were ordered Friday night? A bunch. Everyone who ordered a block or blocks Friday sat and sun has been shipped today! The XL Wrenches came in today as well Should be up on the site today. Thanks ! |
|
|
|
Posted: 3/17/2014 6:08:39 PM EDT
[#19]
Quote HistoryQuoted:
A bunch. Everyone who ordered a block or blocks Friday sat and sun has been shipped today! The XL Wrenches came in today as well Should be up on the site today. Thanks ! Quote HistoryQuoted:
Quoted:
I wonder how many were ordered Friday night? A bunch. Everyone who ordered a block or blocks Friday sat and sun has been shipped today! The XL Wrenches came in today as well Should be up on the site today. Thanks ! I'm sure all of us here thank you also Todd. Like i said in my email,Your stuff is worth it. |
|
|
|
Posted: 3/17/2014 9:45:31 PM EDT
[#20]
Quote HistoryQuoted: SA7 13" Solo 3G BA Kuuma 12.5" Middy http://i1324.photobucket.com/albums/u601/SLRrifleworks/DSC_4275_zps32d9c2d4.jpg  That looks slick. Think I'm in love.
|
|
|
|
Posted: 3/17/2014 10:37:18 PM EDT
[#21]
Installed :)
Thanks to Todd & SLR for the great customer service. 
|
|
|
|
Posted: 3/18/2014 4:13:04 PM EDT
[#22]
SA8-C .875" clamp on will be available on the site Friday
SA6-C .625"clamp on and more SA9-S- .936" Set Screw at plating now, available next week Todd |
|
|
|
Posted: 3/18/2014 6:03:49 PM EDT
[#23]
Any know if the SA7c clamp on will bottom out in a centurion arms cmr rail? Seems like that rail is one of the tightests out there
|
|
|
|
Posted: 3/18/2014 6:25:25 PM EDT
[#24]
Quote HistoryQuoted:
Any know if the SA7c clamp on will bottom out in a centurion arms cmr rail? Seems like that rail is one of the tightests out there I highly doubt it, stick with the set screw |
|
|
|
Posted: 3/18/2014 9:15:59 PM EDT
[#25]
Quoted:
Any know if the SA7c clamp on will bottom out in a centurion arms cmr rail? Seems like that rail is one of the tightests out there By my math, both the SA7SSC and SA7C will work in the 308 CMR rail. But only the SA7SSC set screw version will work in the 556 CMR rail. inside diameter of 556 rail is: 1.12" https://www.rainierarms.com/?page=shop/detail&product_id=3677 inside diameter of 308 rail is: 1.25" https://www.rainierarms.com/?page=shop/detail&product_id=3660 Set screw version with 556 CMR rail The distance from centerline of bore on SA7SSC is: 0.545 = 1.365 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=84 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would leave you 0.15" clearance between the bottom of the set screw block and the inside of the 556 rail....unless I'm doing something wrong. Clamp on version with 556 CMR rail The distance from centerline of bore on SA7C is: 0.580 = 1.40 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=87 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would mean the bottom of the clamp gas block would extend 0.02" past the inside of the 556 rail....unless I'm doing something wrong. Am I doing this wrong? lol |
|
|
|
Posted: 3/18/2014 10:40:59 PM EDT
[#26]
Quote HistoryQuoted: What size is the adjustment wrench? BTW got my two in. One is installed and will hopefully get to the range this weekend. http://i1201.photobucket.com/albums/bb346/oviscanis/ff16e536-5770-4c7a-b642-2a1f5058d783_zps35c07aa2.jpg  It is a DD 16" light weight middy with .750 gas block. Some day the feds will let my end cap come home and I'll test the adjustment.
|
|
|
|
Posted: 3/19/2014 12:53:05 AM EDT
[#27]
Quote HistoryQuoted:
By my math, both the SA7SSC and SA7C will work in the 308 CMR rail. But only the SA7SSC set screw version will work in the 556 CMR rail. inside diameter of 556 rail is: 1.12" https://www.rainierarms.com/?page=shop/detail&product_id=3677 inside diameter of 308 rail is: 1.25" https://www.rainierarms.com/?page=shop/detail&product_id=3660 Set screw version with 556 CMR rail The distance from centerline of bore on SA7SSC is: 0.545 = 1.365 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=84 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would leave you 0.15" clearance between the bottom of the set screw block and the inside of the 556 rail....unless I'm doing something wrong. Clamp on version with 556 CMR rail The distance from centerline of bore on SA7C is: 0.580 = 1.40 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=87 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would mean the bottom of the clamp gas block would extend 0.02" past the inside of the 556 rail....unless I'm doing something wrong. Am I doing this wrong? lol Quote HistoryQuoted:
Quoted:
Any know if the SA7c clamp on will bottom out in a centurion arms cmr rail? Seems like that rail is one of the tightests out there By my math, both the SA7SSC and SA7C will work in the 308 CMR rail. But only the SA7SSC set screw version will work in the 556 CMR rail. inside diameter of 556 rail is: 1.12" https://www.rainierarms.com/?page=shop/detail&product_id=3677 inside diameter of 308 rail is: 1.25" https://www.rainierarms.com/?page=shop/detail&product_id=3660 Set screw version with 556 CMR rail The distance from centerline of bore on SA7SSC is: 0.545 = 1.365 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=84 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would leave you 0.15" clearance between the bottom of the set screw block and the inside of the 556 rail....unless I'm doing something wrong. Clamp on version with 556 CMR rail The distance from centerline of bore on SA7C is: 0.580 = 1.40 - 0.82 . . . See http://slrrifleworks.com/index.php?route=product/product&path=57_73&product_id=87 The distance from centerline of the 556 rail would be: 0.560 = 1.12 / 2 This would mean the bottom of the clamp gas block would extend 0.02" past the inside of the 556 rail....unless I'm doing something wrong. Am I doing this wrong? lol Looks about right. I've installed plenty of DA7-L's and Sentry Set screw versions in 5.56 CMR's. The Sentry clamp on is just a bit thicker on the bottom to accommodate the bolts passing through. Its enough that unless you just should go with a set screw block, no clamp on out there will work with that HG. Todd |
|
|
|
Posted: 3/19/2014 6:50:37 AM EDT
[#28]
so I get the set screw... I would have to cut the set screws a little to make sure they clear the HAndguatd?
|
|
|
|
Posted: 3/19/2014 10:08:45 AM EDT
[#29]
Quote HistoryQuoted:
so I get the set screw... I would have to cut the set screws a little to make sure they clear the HAndguatd? No we use 3/16" set screws . With a dimple they sit flush with the bottom of the block |
|
|
|
Posted: 3/21/2014 9:38:34 PM EDT
[#30]
SA8-C up on the site now.
(.875" Sentry Clamp on) 
|
|
|
|
Posted: 3/23/2014 9:09:44 AM EDT
[#31]
Installed a SENTRY on my KAC barrel. Awesome gas block!
  
|
|
|
|
Posted: 3/23/2014 11:17:24 AM EDT
[#32]
Quote HistoryQuoted: Installed a SENTRY on my KAC barrel. Awesome gas block! https://www.boltcarrier.com/images/franken-upper-001.jpeg https://www.boltcarrier.com/images/franken-upper-002.jpeg https://www.boltcarrier.com/images/franken-upper-004.jpeg |
|
|
|
Posted: 3/23/2014 11:22:00 AM EDT
[#33]
anyone know if the clamping 750 will fit in the new BCM KMR?
|
|
|
|
Posted: 3/23/2014 11:28:04 AM EDT
[#34]
Quote HistoryQuoted: anyone know if the clamping 750 will fit in the new BCM KMR? |
|
|
|
Posted: 3/23/2014 12:47:10 PM EDT
[#35]
Quote HistoryQuoted:
That's beautiful! What barrel length is that? It is a long story but the short of it is that another gunsmith tried to pin/weld a muzzle device on it and screwed up a KAC 14.5" barrel pretty royally. I cut it down to about 14.0" (started the new threads just at the shoulder). |
|
|
|
Posted: 3/24/2014 2:40:08 AM EDT
[#36]
Quote HistoryQuoted:
Yep, I posted a pic on page 7. Quote HistoryQuoted:
Quoted:
anyone know if the clamping 750 will fit in the new BCM KMR? liezone, you used a Clamp on NOT the set screw is that correct? Just want to confirm. |
|
|
|
Posted: 3/24/2014 5:37:56 PM EDT
[#37]
I may have missed it in the thread, but how many positions does it have? I think the DA7 was 15?
|
|
|
|
Posted: 3/24/2014 5:40:37 PM EDT
[#38]
Double tap
|
|
|
|
Posted: 3/24/2014 7:03:25 PM EDT
[#39]
Quote HistoryQuoted: liezone, you used a Clamp on NOT the set screw is that correct? Just want to confirm. Quote HistoryQuoted: Quoted: Quoted: anyone know if the clamping 750 will fit in the new BCM KMR? liezone, you used a Clamp on NOT the set screw is that correct? Just want to confirm. |
|
|
|
Posted: 3/25/2014 12:50:30 AM EDT
[#40]
Quote HistoryQuoted:
SA8-C .875" clamp on will be available on the site Friday SA6-C .625"clamp on and more SA9-S- .936" Set Screw at plating now, available next week Todd How is the progress on the SA6-C or SA6-S? I checked the site and didn't see any .625 blocks. |
|
|
|
Posted: 3/25/2014 1:01:56 AM EDT
[#41]
.625" Clamp on will be available next week. Going to the plater on wed.
And they got their own profile.. Not an under bored .750". These things are tiny. |
|
|
|
Posted: 3/25/2014 1:12:13 AM EDT
[#42]
Quote HistoryQuoted:
.625" Clamp on will be available next week. Going to the plater on wed. And they got their own profile.. Not an under bored .750". These things are tiny. VERY nice! Can't wait to get my hands on one!! |
|
|
|
Posted: 3/25/2014 1:37:33 AM EDT
[#43]
Quote HistoryQuoted:
.625" Clamp on will be available next week. Going to the plater on wed. And they got their own profile.. Not an under bored .750". These things are tiny. Todd,do ya think you will be the first to have a Clamp on with the .625, to make it under the centurion arms cmr? |
|
|
|
Posted: 3/25/2014 11:32:09 AM EDT
[#44]
Quote HistoryQuoted:
Todd,do ya think you will be the first to have a Clamp on with the .625, to make it under the centurion arms cmr? Quote HistoryQuoted:
Quoted:
.625" Clamp on will be available next week. Going to the plater on wed. And they got their own profile.. Not an under bored .750". These things are tiny. Todd,do ya think you will be the first to have a Clamp on with the .625, to make it under the centurion arms cmr? It'll be tight in there but since it is using a smaller profile it should work in the cmr. I'll be happy to send one out to a cmr user to to test fit. Don't have any around at the moment. Just let me know. We will make set screw versions too of the 6's soon. |
|
|
|
Posted: 3/25/2014 11:59:24 PM EDT
[#45]
Got my Sentry 7 clamp put on today and tested it with some mild reloads and my somewhat hot 75 OTM accuracy load.
I was surprised how much difference it made, made a soft shooting rifle even softer. Can't wait to try shooting it at distance. |
|
|
|
Posted: 3/26/2014 4:14:35 PM EDT
[#46]
SA9-SSC Set screw versions back in stock friday.
SA6-C Clamp on looking like tuesday for release. |
|
|
|
Posted: 3/26/2014 10:42:02 PM EDT
[#47]
Quote HistoryQuoted:
SA6-C Clamp on looking like tuesday for release. To clarify this SA6-C Clamp on is the .625 but in a clamp on version? And a separate set screw version of .625 is yet to be released? |
|
|
|
Posted: 3/26/2014 11:45:48 PM EDT
[#48]
Quote HistoryQuoted:
To clarify this SA6-C Clamp on is the .625 but in a clamp on version? And a separate set screw version of .625 is yet to be released? Quote HistoryQuoted:
Quoted:
SA6-C Clamp on looking like tuesday for release. To clarify this SA6-C Clamp on is the .625 but in a clamp on version? And a separate set screw version of .625 is yet to be released? This is Correct. |
|
|
|
Posted: 3/27/2014 12:16:09 PM EDT
[#49]
Quote HistoryQuoted:
It'll be tight in there but since it is using a smaller profile it should work in the cmr. I'll be happy to send one out to a cmr user to to test fit. Don't have any around at the moment. Just let me know. We will make set screw versions too of the 6's soon. Quote HistoryQuoted:
Quoted:
Quoted:
.625" Clamp on will be available next week. Going to the plater on wed. And they got their own profile.. Not an under bored .750". These things are tiny. Todd,do ya think you will be the first to have a Clamp on with the .625, to make it under the centurion arms cmr? It'll be tight in there but since it is using a smaller profile it should work in the cmr. I'll be happy to send one out to a cmr user to to test fit. Don't have any around at the moment. Just let me know. We will make set screw versions too of the 6's soon. Hey Todd, Send me a .750 clamp on to test on a CMR-if it fits i be happy to pay for it. |
|
|
|
Posted: 3/27/2014 12:34:28 PM EDT
[#50]
Quote HistoryQuoted:
Hey Todd, Send me a .750 clamp on to test on a CMR-if it fits i be happy to pay for it. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
.625" Clamp on will be available next week. Going to the plater on wed. And they got their own profile.. Not an under bored .750". These things are tiny. Todd,do ya think you will be the first to have a Clamp on with the .625, to make it under the centurion arms cmr? It'll be tight in there but since it is using a smaller profile it should work in the cmr. I'll be happy to send one out to a cmr user to to test fit. Don't have any around at the moment. Just let me know. We will make set screw versions too of the 6's soon. Hey Todd, Send me a .750 clamp on to test on a CMR-if it fits i be happy to pay for it. Sure Email me your address through our site |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
