User Panel
What length to cover the gas block on a rifle length gas system (low profile adj gas block) AR10B w/ 20" bbl I'm assuming the 15" but I don't want to bury the gasblock and not be able to adjust. it.
I really like the looks of this one. SSK ROCKS!!! |
|
Quoted:
What length to cover the gas block on a rifle length gas system (low profile adj gas block) AR10B w/ 20" bbl I'm assuming the 15" but I don't want to bury the gasblock and not be able to adjust. it. I really like the looks of this one. SSK ROCKS!!! View Quote Armalite handguards will run next. You would need a 12" to leave your gas block exposed for adjustment, or a 15" would cover it. |
|
Looks great.
I've been waiting an a decent keymod rail for my Armalite AR-10B for a while now and it seems like this may be the rail for me. I'll keep checking this thread for info on the release of the Armalite version. |
|
How do I order one right now? I saw them on your web site but it didn't say if they were for the ar 15 or the dpms lr 308
Thank you. |
|
The 308 units are not on the web site yet. They will be added next week. We are two weeks out on dpms low 12 and three on the low 15. Then we will go to high followed by Armalite. Thank you.
Troy MI |
|
Mint to post this on the ar-15 one..
Just bought a dpms g2 recon. Now you just need to make a Barrel nut for it so I can put this rail on. Hint Hint |
|
You all read my freaking mind.
I am now much closer to realizing this M&P10 I have in my head. SOPMOD. Vortex Viper PST 6-24x50 FFP YHM 762Ti Ergo grip Thank you MI. |
|
Yes we are doing the DPMS high. They are running.
Thanks TROY MI |
|
Let's see, all I need is: FDE 15 inch SSK LR-308 15 inch SSK 3-.308 three-port brakes. That'll do it. Might even keep me busy until the spring thaw gets here. |
|
Will these be shipping with your barrel nut wrench?
Also, I work for a FFL, so can you give me some idea as to which distributors will be getting these? I'd like to be able to start outfitting some of the S&W M&P10s if someone asks me for one. |
|
We will be shipping these with our barrel nut wrench. We will assume these will ship to all our standard distributors.
thanks TROY MI |
|
Will these be available for the high pattern ala CMMG, Mega etc.
|
|
We will also offer these in the DPMS high pattern and the Armalite height . If your receiver is that height you are good to go.
thank you TROY MI |
|
Very nice.
I just need to decide on whether to get the 12 or 15 now. Thank you MI. |
|
|
Quoted:
We will also offer these in the DPMS high pattern and the Armalite height . If your receiver is that height you are good to go. thank you TROY MI View Quote Nice. You guys rock BTW. Nice to see a local business that's been around since the beginning (you guys have been making flip ups since flip ups went up ) still innovating and staying on top of the market. |
|
Looks like the 12" is going to be ordered soon.
Are you all going to make some keymod panels for it? |
|
We are making key mod panels. The mold is underway and we hope to have it running them soon.
THANKS TROY MI |
|
It appears to be keymod on the bottom from a couple of the previous shots.
|
|
Quoted:
Any update on when the 15" "high" DPMS will post on your web site? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Yes we are doing the DPMS high. They are running. Thanks TROY MI Your last update on the DPMS High / .210" tang versions came on Feb 17, this guy asked for an update on Mar 2, no response. Its Mar 20, now. Any word on the high profile 308 keymod handguards? Your website still says coming soon on the 12" version. The 15" version doesn't even have a place holder, which I'm fine with. Only worried about the 12" |
|
The high versions are running last due to the lowest volume . They are be out of the mill late next week.
thanks TROY MI |
|
|
|
Does the 15" version weigh 13.3oz with the barrel nut?
Also, do these include a barrel nut wrench when ordering. I looked on the website and it doesn't specifically say what it will fit. I'm thinking about using one for my MATEN build. |
|
Mine had the barrel nut wrench in the package.
1/2" drive needed. The barrel nut should be included in the weight. It balances very well on my MP10. Does your MATEN use Armalite or DPMS pattern barrel nuts? If it uses DPMS, is it high or low? |
|
No idea, I thought the MATENs were DPMS patterns, not sure if it is high or low. Anyone?
|
|
Quoted:
They are DPMS high from what their website says View Quote Yes MATEN are DPMS High profile receivers. I measured mine, the picatinny tang and its about .230" For example, with a MATEN build you'd use MI part number MI-308SS12-DHK ..the 'h' in the part number stands for "high" and you'll notice the description says .210" tang as opposed to .150" tang (DPMS low profile). MI-308SS12-DHK MI D.P.M.S. .308 Key Mod Series One Piece Free Float Handguard, .210 Upper Tang, 12-inch Rifle This handguard is not out yet, but he said they'd be "out of the mill" at the end of this week in a previous post around here...not sure when that means it will show up for sale. Is there a firm date on when the DPMS High rails will show up on the MI site for sale? Midway has them listed too, apparently to be in stock by March 31 12" High and 15" High But we all know how expected dates in stock go. Either way, it should not be too far out...as long as they don't decide to can production (which I doubt)....just saying. lol EDIT: I pretty bummed when SLR cancelled their 308 hg project and went with the G2 hg instead. |
|
What are the ID dimensions? Can you fit a clamp on gas block under this thing?
|
|
|
Quoted:
The high versions are running last due to the lowest volume . They are be out of the mill late next week. thanks TROY MI View Quote Any word on when this DPMS high (.210" tang) HGs will be available to buy? I guess they were supposed to be out of the mill a week ago (on 3/28). I am also curious was the inside diameter is, I can't seem to find that anywhere. |
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.