Previous Page
Page:  / 2
Author
Message
PalmettoStateArmory
Member
Offline
Posts: 9576
Feedback: 100% (243)
Posted: 3/2/2012 5:19:35 AM EST
PSA 16" 300 AAC, Hammer Forged, Chrome-lined Upper


As low as: $459.95
Price as configured: $557.90

Details

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. 16" length, 300 AAC chamber with a 1:8 twist, MPI & HPT, chrome-lined, carbine-length gas port, and M4 feedramps. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo

Each upper is assembled to order with care, and test fired.

*Please allow up to 15 business days for your Complete Assembled Upper to ship from our facility. Holiday and special lead times can be longer*

Shipping labels are created shortly after orders are placed. Shipping labels update when the product leaves our facility and are en route to their destination. You will be emailed tracking information when the order leaves our facility, however if you receive one shortly after you place your order and it remains dormant, don’t be alarmed. Your tracking information will be updated when it leaves our facility and is still subject to the aforementioned lead time. If your tracking number goes beyond the listed lead time please get in contact with us via email or phone and we will look into your issue.

Signature required on delivery.

Click HERE To Order!
SoCoBS
Offline
Posts: 23
Feedback: 100% (7)
Link To This Post
Posted: 3/3/2012 6:43:58 PM EST
nice to see the 300 AAC blackout continue to rise in production
RSViper
Offline
Posts: 372
Feedback: 100% (42)
Link To This Post
Posted: 3/3/2012 6:49:21 PM EST
Now I'm not sure which i want, the 6.8 middy you guys have or the 300 AAC.
AR-300
Offline
Posts: 2
Feedback: 0% (0)
Link To This Post
Posted: 3/5/2012 7:28:52 AM EST
Got on on order this weekend!!
greygoose628
Offline
Posts: 60
Feedback: 100% (12)
Link To This Post
Posted: 3/5/2012 9:14:00 AM EST
[Last Edit: 3/5/2012 9:14:10 AM EST by greygoose628]
any 8" barrels coming?
NYBRD
Offline
Posts: 2
Feedback: 100% (15)
Link To This Post
Posted: 3/6/2012 8:35:20 AM EST
I'm so buying this but I'm gonna wait until the lowers are on sale for $49 I'm gonna get like 2 or 3 lowers lol
PalmettoStateArmory
Member
Offline
Posts: 9611
Feedback: 100% (243)
Link To This Post
Posted: 3/6/2012 9:30:24 AM EST
This is an example of what your PSA 16'' 300 AAC upper could look like one day when it's all grown up.

NYBRD
Offline
Posts: 4
Feedback: 100% (15)
Link To This Post
Posted: 3/6/2012 3:40:56 PM EST
^^^^^ very sweet !!! What rail is that looks dope
HiramRanger
Helldog's Nummy Nums
NRA
Offline
Posts: 44402
Feedback: 100% (106)
Link To This Post
Posted: 3/6/2012 3:47:13 PM EST
Originally Posted By NYBRD:
^^^^^ very sweet !!! What rail is that looks dope


This thread is evil!
"And as for the critics, they tell me I don't get. Everybody can tell you how to do it, they never did it," Jay-Z
NYBRD
Offline
Posts: 7
Feedback: 100% (15)
Link To This Post
Posted: 3/6/2012 4:00:38 PM EST
Originally Posted By HiramRanger:
Originally Posted By NYBRD:
^^^^^ very sweet !!! What rail is that looks dope


This thread is evil!


Evil is not the word !!! lol I can't wait to pick up this upper and some lowers , anybody know when these lowers go on sale ? Fathers day ?
PSA thanks for being awesome
OIF_Vet08-09
Fear is the foundation of most governments.
Offline
Posts: 3627
Feedback: 100% (124)
Link To This Post
Posted: 3/7/2012 8:23:30 AM EST
Also want to know what rail that is in the picture
Yesterday, I was on the train sitting across from a smoking hot Thai chick. I kept saying to myself, please don't get an erection, please don't get an erection, but, she did.
-rainman
PalmettoStateArmory
Member
Offline
Posts: 9617
Feedback: 100% (243)
Link To This Post
Posted: 3/7/2012 11:03:41 AM EST
The rail is Midwest Industries Gen 2 SS.

More info on it here
badazzar15
Spike's Tactical
Offline
Posts: 22097
Feedback: 100% (345)
Link To This Post
Posted: 3/9/2012 4:33:04 PM EST
Originally Posted By PalmettoStateArmory:
PSA 16" 300 AAC, Hammer Forged, Chrome-lined Upper

http://palmettostatearmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/9/2/9282.jpg
As low as: $459.95
Price as configured: $557.90

Details

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. 16" length, 300 AAC chamber with a 1:8 twist, MPI & HPT, chrome-lined, carbine-length gas port, and M4 feedramps.. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo

Each upper is assembled to order with care, and test fired.

*Please allow up to 15 business days for your Complete Assembled Upper to ship from our facility. Holiday and special lead times can be longer*

Shipping labels are created shortly after orders are placed. Shipping labels update when the product leaves our facility and are en route to their destination. You will be emailed tracking information when the order leaves our facility, however if you receive one shortly after you place your order and it remains dormant, don’t be alarmed. Your tracking information will be updated when it leaves our facility and is still subject to the aforementioned lead time. If your tracking number goes beyond the listed lead time please get in contact with us via email or phone and we will look into your issue.

Signature required on delivery.

Click HERE To Order!



Remington producing those 300 Blackout Proof rounds??

BRYCE93
Offline
Posts: 137
Feedback: 100% (35)
Link To This Post
Posted: 3/29/2012 1:27:11 PM EST
[Last Edit: 3/29/2012 2:18:11 PM EST by BRYCE93]
TAG
semperfiws6
Member
Offline
Posts: 3200
Feedback: 100% (221)
Link To This Post
Posted: 3/29/2012 4:53:32 PM EST
What are the barrels marked with?
Being a Daddy is the greatest honor and responsibility God has given me.
sinlessorrow
Member
Offline
Posts: 6838
Feedback: 100% (40)
Link To This Post
Posted: 3/29/2012 5:44:47 PM EST
Originally Posted By badazzar15:
Originally Posted By PalmettoStateArmory:
PSA 16" 300 AAC, Hammer Forged, Chrome-lined Upper

http://palmettostatearmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/9/2/9282.jpg
As low as: $459.95
Price as configured: $557.90

Details

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. 16" length, 300 AAC chamber with a 1:8 twist, MPI & HPT, chrome-lined, carbine-length gas port, and M4 feedramps.. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo

Each upper is assembled to order with care, and test fired.

*Please allow up to 15 business days for your Complete Assembled Upper to ship from our facility. Holiday and special lead times can be longer*

Shipping labels are created shortly after orders are placed. Shipping labels update when the product leaves our facility and are en route to their destination. You will be emailed tracking information when the order leaves our facility, however if you receive one shortly after you place your order and it remains dormant, don’t be alarmed. Your tracking information will be updated when it leaves our facility and is still subject to the aforementioned lead time. If your tracking number goes beyond the listed lead time please get in contact with us via email or phone and we will look into your issue.

Signature required on delivery.

Click HERE To Order!



Remington producing those 300 Blackout Proof rounds??



an toms been on a trolling roll here lately.

you planning on marking up your products this election?
Originally Posted by Iraqgunz
This is 2012. The world is going to end this December and people are still trying to debate the merits of piece of shit, cost cutting crap AR's. Really?
parad0x
The Monarch!
Offline
Posts: 115
Feedback: 100% (3)
Link To This Post
Posted: 3/30/2012 3:50:27 AM EST
Originally Posted By badazzar15:
Originally Posted By PalmettoStateArmory:
PSA 16" 300 AAC, Hammer Forged, Chrome-lined Upper

http://palmettostatearmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/9/2/9282.jpg
As low as: $459.95
Price as configured: $557.90

Details

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. 16" length, 300 AAC chamber with a 1:8 twist, MPI & HPT, chrome-lined, carbine-length gas port, and M4 feedramps.. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo

Each upper is assembled to order with care, and test fired.

*Please allow up to 15 business days for your Complete Assembled Upper to ship from our facility. Holiday and special lead times can be longer*

Shipping labels are created shortly after orders are placed. Shipping labels update when the product leaves our facility and are en route to their destination. You will be emailed tracking information when the order leaves our facility, however if you receive one shortly after you place your order and it remains dormant, don’t be alarmed. Your tracking information will be updated when it leaves our facility and is still subject to the aforementioned lead time. If your tracking number goes beyond the listed lead time please get in contact with us via email or phone and we will look into your issue.

Signature required on delivery.

Click HERE To Order!



Remington producing those 300 Blackout Proof rounds??



Remington part# 21824
http://img839.imageshack.us/img839/4172/photojn.jpg

Posted Via AR15.Com Mobile
A quote from someone famous makes you neither famous nor quotable yourself.
srob7001
Offline
Posts: 390
Feedback: 0% (0)
Link To This Post
Posted: 3/30/2012 4:02:11 AM EST


Fix it fer you
GM991
Offline
Posts: 7
Feedback: 0% (0)
Link To This Post
Posted: 3/31/2012 10:14:13 AM EST
Do you guys ship uppers to MA?
Thanks
buckmaster57
Offline
Posts: 205
Feedback: 0% (0)
Link To This Post
Posted: 4/15/2012 2:01:17 PM EST
Very nice, It's only money....
ED12123
Offline
Posts: 2
Feedback: 100% (3)
Link To This Post
Posted: 4/16/2012 8:48:47 AM EST
I've been toying with the idea of a 300 Blackout for my next build and this is VERY tempting.

PSA, any chance you'll be offering shorter versions in the future? I'd really like to see a 14.7 with perm brake.

Either way, I look forward to doing business with you!

Chris
BigDozer66
O'er the land of the free & the home of the brave!
NRA
Offline
Posts: 19218
Feedback: 100% (78)
Link To This Post
Posted: 4/18/2012 4:33:43 AM EST
Originally Posted By HiramRanger:
Originally Posted By NYBRD:
^^^^^ very sweet !!! What rail is that looks dope


This thread is evil!


Yes it is!

I have been thinking of a 300 AAC BO to use for hog hunting along with a suppressor of some make.

BigDozer66
"...One Nation, under God, indivisible, with liberty and justice for all."
“War, like most other things, is a science to be acquired and perfected by diligence, by perseverance, by time, and by practice.” Alexa
andrasik
GD's NFA Ambassador
Offline
Posts: 20499
Feedback: 100% (16)
Link To This Post
Posted: 4/18/2012 7:51:10 AM EST
Do you have any plans for any 8-10" .300blk barrels?
"Here at the edge of this world, here I gaze at a pantheon of oak, a citadel of stone. If this grand panorama before me is what you call God, then God is not dead."
PalmettoStateArmory
Member
Offline
Posts: 9892
Feedback: 100% (243)
Link To This Post
Posted: 4/18/2012 9:17:06 AM EST
Yes, 8, 9, 10.5, and 12'' are in the works.
whiplash10
Offline
Posts: 78
Feedback: 100% (38)
Link To This Post
Posted: 4/19/2012 9:30:27 AM EST
[Last Edit: 4/19/2012 9:30:54 AM EST by whiplash10]
Originally Posted By sinlessorrow:
Originally Posted By badazzar15:
Originally Posted By PalmettoStateArmory:
PSA 16" 300 AAC, Hammer Forged, Chrome-lined Upper

http://palmettostatearmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/9/2/9282.jpg
As low as: $459.95
Price as configured: $557.90

Details

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. 16" length, 300 AAC chamber with a 1:8 twist, MPI & HPT, chrome-lined, carbine-length gas port, and M4 feedramps.. Barrels are finished off with a taper pinned, f-marked, front sight post, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside, and laser engraved with the Palmetto State Armory logo

Each upper is assembled to order with care, and test fired.

*Please allow up to 15 business days for your Complete Assembled Upper to ship from our facility. Holiday and special lead times can be longer*

Shipping labels are created shortly after orders are placed. Shipping labels update when the product leaves our facility and are en route to their destination. You will be emailed tracking information when the order leaves our facility, however if you receive one shortly after you place your order and it remains dormant, don’t be alarmed. Your tracking information will be updated when it leaves our facility and is still subject to the aforementioned lead time. If your tracking number goes beyond the listed lead time please get in contact with us via email or phone and we will look into your issue.

Signature required on delivery.

Click HERE To Order!



Remington producing those 300 Blackout Proof rounds??



an toms been on a trolling roll here lately.

you planning on marking up your products this election?


I can't figure out why folks still by from ST.

GG_Asian
Offline
Posts: 9
Feedback: 100% (2)
Link To This Post
Posted: 4/25/2012 5:28:34 AM EST
Originally Posted By PalmettoStateArmory:
Yes, 8, 9, 10.5, and 12'' are in the works.


ETA on the 8" barrel?
  Previous Page
Page:  / 2