User Panel
That is a very good looking product there. Do you know when the first ones will be ready to be picked up from yalls shop? Also do you have an estimated price?
|
|
Let me be the first to say that thing looks first class. Awesome!
ETA: I guess I was 2nd |
|
|
Quoted:
That is a very good looking product there. Do you know when the first ones will be ready to be picked up from yalls shop? Also do you have an estimated price? They should be done in a couple of weeks. I don't have exact pricing yet but the lowers will be in the $200-$250 price range, the uppers will be in the $190-$225 price range. |
|
|
Man, it keeps getting better with each post you make. Im gonna need to get some overtime hours at work to buy a few.
|
|
Where does one obtain one of these biohazard billet lowers/ uppers?
|
|
Nice. Looks like you'll give Mega a run for their money.
What's up with the unfinished warthog? Is it stainless? When can we expect any warthogs in stock? |
|
Quoted:
I like it, FYI Tom, you IM box is full, cant send you PMs. Just cleaned it up a bit. |
|
|
Quoted:
Tom.. is the $200 - $250 priced lower complete or stripped? Stripped. |
|
Quoted:
Where does one obtain one of these biohazard billet lowers/ uppers? We will be taking orders in the next couple of weeks. |
|
What is with the Idaho markings? Great lower and upper though!
|
|
Quoted:
What is with the Idaho markings? Great lower and upper though! They will only be like that on the Prototypes. At the time they were machined we didn't have the ATF variance yet. |
|
I like that un-plated look on the upper. Really sets it apart from all other. Will you sell the un plated warthogs?
|
|
Quoted:
Here are some better photos of the Billet Bio-Hazard lower just in case you havn't see them yet. http://i135.photobucket.com/albums/q160/badazzar15/spikes68.jpg SWEET MOTHER FU**! Spikes you've outdone yourself. Holy hell I need that to go under my 9mm build. My FFL is already on file with you guys, please let us know when it's go time. |
|
You guys are going to cost me a FORTUNE!! I am about to order a complete upper from you guys!!
|
|
Quoted:
Quoted:
Nice. Looks like you'll give Mega a run for their money. What's up with the unfinished warthog? Is it stainless? When can we expect any warthogs in stock? Yes that's an unplated Warthog. The Warthog's are being plated right now. Here is a plated one. http://i135.photobucket.com/albums/q160/badazzar15/sbr2.jpg That looks nice. Is that a DD light 7.0 and a 7.5 inch barrel? I like the looks of it with the Warthog on the end. |
|
Quoted:
Quoted:
Quoted:
Nice. Looks like you'll give Mega a run for their money. What's up with the unfinished warthog? Is it stainless? When can we expect any warthogs in stock? Yes that's an unplated Warthog. The Warthog's are being plated right now. Here is a plated one. http://i135.photobucket.com/albums/q160/badazzar15/sbr2.jpg That looks nice. Is that a DD light 7.0 and a 7.5 inch barrel? I like the looks of it with the Warthog on the end. Yup 7.5" LW barrel with 7" Lite rail. |
|
Quoted:
I like that un-plated look on the upper. Really sets it apart from all other. Will you sell the un plated warthogs? Chances are we will only sell them with Melonite finish. |
|
Quoted:
Quoted:
I like that un-plated look on the upper. Really sets it apart from all other. Will you sell the un plated warthogs? Chances are we will only sell them with Melonite finish. Ok, Thats what i figured oh well. They still like amazing. |
|
What is the weight difference with your billet parts versus the typical forged alluminum?
|
|
Quoted:
What is the weight difference with your billet parts versus the typical forged alluminum? The Billet is a couple ounces heavier. |
|
I must say I really like them! I no a lefty upper is out of the question, but you intrigued me when you said KAC let you use their ambi bolt release...what about their ambi mag release (the one with the paddle behind the mag release)? I must say if you can swing that one I will sell off all of my lowers and restock with yours!
|
|
Quoted:The first batch of Billet uppers are being Anodized right now,
DOH! Quoted: the Bio-Hazard Billet lowers are being machined right now.
DOH! DOH! Quoted:
I forgot to mention to you guys that the production Billet lowers will have Ambi Bolt releases! Trey from KAC was kind enough to allow us to use the idea. DOH! DOH! DOH! make a list and put me down! you have my credit card and FFL info! Must have! |
|
Damn Tom....
That's the nicest upper and billet lower I've seen yet.... well.... the lower is a close 2nd to my MPL lower. Totally sick... you guys outdid yourselves. If I was in the market for another rifle... I just found the upper and lower for it. -ZA |
|
That would really make my day!
Quoted:
...what about their ambi mag release (the one with the paddle behind the mag release)? I must say if you can swing that one I will sell off all of my lowers and restock with yours! Is there a list or should we wait for them to be up on your site? |
|
Very nice..........will this billet upper also be available as a complete upper? And will the final products(lower), have 'Spikes' or 'Seekins'?
Why 'Warthog'? Was it to compete with Novekse's 'Flaming Pig'? |
|
Alas, more stuff on the "I Want" list
Quoted:
what about their ambi mag release (the one with the paddle behind the mag release)? I must say if you can swing that one I will sell off all of my lowers and restock with yours! You could just get a Norgon ambi-mag release |
|
Quoted:
Very nice..........will this billet upper also be available as a complete upper? And will the final products(lower), have 'Spikes' or 'Seekins'? Why 'Warthog'? Was it to compete with Novekse's 'Flaming Pig'? Yes we will be building complete uppers with them. The finial product will be marked Spike's Tactical. The name Warthog was no way intened to compete with the Flaming Pig. |
|
Quoted:
Alas, more stuff on the "I Want" list Quoted:
what about their ambi mag release (the one with the paddle behind the mag release)? I must say if you can swing that one I will sell off all of my lowers and restock with yours! You could just get a Norgon ambi-mag release Yeah we run the Norgon's. |
|
I have the Norgons too, just like the bigger paddle foward of the trigger idea and I dont think yall would charge $90 for it either, but idk?
|
|
Spikes billet upper and lower....uggg....I think I just messed my pants.
|
|
Tom,
Will the biohazard lowers be available in forged or in billet only? Also, as asked a few posts ago, is there a list for the biohazard lower or should we just wait for it to show up on the website? Thanks! -weagle |
|
Do the dimensions on the front of the upper receiver allow for installation of a LaRue Tactical handguard with the keeper?
|
|
Quoted:
Do the dimensions on the front of the upper receiver allow for installation of a LaRue Tactical handguard with the keeper? Yup, works perfect. |
|
ambi bolt release. very nice!! thats one of the reasons that i prefer the POF gen III lower to others. plus yours looks like it will be cheaper.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.