User Panel
Posted: 10/6/2015 2:42:25 PM EDT
I just placed my order for a nodak retro receiver and they said the are currently working on April orders. Have people been experiencing a 6 month delivery schedule? Or do they get them processed faster?
Bummer the wait is that long... |
|
I have had a NDS-XM16E1 on since June 2015. Harlan says that I may or may not get it this month. I have several others in front of me. Generally, six months is about the norm, give or take a month. Nonetheless, they are well worth waiting for.
|
|
I ordered two lowers in March, a black A1 full fence and a gray A1 full fence. I received the black one back in august and I'm going to pick the gray one up today. They are worth the wait, it's part of the fun and anticipation. Just think of it as retro foreplay, like sex....
|
|
By the end of October we expect to fill and ship on orders taken through mid to late June for gray NDS-16A1 full fence lower receivers.
We expect to do a batch of black anodizing in early November to fill the orders for black NDS-6A1 lower receivers. A good number of orders have been taken since June for gray NDS-XM16E1 partial fence lower receivers, and we will work to get these filled in November and December. We will complete a machining run of NDS-16A1 lower receivers from forgings by the end of October, and these will go through processing and finishing to fill the order from July to the present. I can't say when we will get caught up with orders for gray NDS-16A1 lower receivers, but our current emphasis is on getting NDS-16A1 lower receivers through prep and gray anodizing for the orders we have taken. We will process NDS-601 slick side lower receivers through anodizing as needed. Generally we have no more than five pre-orders for gray NDS-601 lower receivers before we send some through for anodizing. We continue to take pre-orders for all the retro NDS lower receivers mentioned above. Call us at 952-942-1909 to place your pre-order. Harlan NoDak Spud LLC |
|
Quoted:
By the end of October we expect to fill and ship on orders taken through mid to late June for gray NDS-16A1 full fence lower receivers. We expect to do a batch of black anodizing in early November to fill the orders for black NDS-6A1 lower receivers. A good number of orders have been taken since June for gray NDS-XM16E1 partial fence lower receivers, and we will work to get these filled in November and December. We will complete a machining run of NDS-16A1 lower receivers from forgings by the end of October, and these will go through processing and finishing to fill the order from July to the present. I can't say when we will get caught up with orders for gray NDS-16A1 lower receivers, but our current emphasis is on getting NDS-16A1 lower receivers through prep and gray anodizing for the orders we have taken. We will process NDS-601 slick side lower receivers through anodizing as needed. Generally we have no more than five pre-orders for gray NDS-601 lower receivers before we send some through for anodizing. We continue to take pre-orders for all the retro NDS lower receivers mentioned above. Call us at 952-942-1909 to place your pre-order. Harlan NoDak Spud LLC View Quote Thanks for the update Harlan. We do appreciate you chiming in with the actually scoop. |
|
|
|
Thanks Harlan. Sounds like some of us may have early Christmas!!
|
|
10/13/2015
We just got in an anodized batch of gray NDS-16A1 (full fence) lower receivers, and we graded quite a few as cosmetic BLEMs. The shade of anodizing varies, with some areas darker, and some areas lighter. This variation will not affect function. We have priced these with a $10 discount from regular price. For those who have April/May pre-orders, and who will take a cosmetic BLEM NDS-16A1 to fill the order, please call us at 952-942-1909 or email us at [email protected]. Thanks. Harlan NoDak Spud LLC ________ 10/16/2015 All of the above mentioned gray, blem NDS-16A1 lower receivers have now been tied to already taken orders. Thanks. Harlan NoDak Spud LLC |
|
I just got my fantastic email stating my NDS-XM16E1 lower was ready. I placed it 6/5, which would put the wait at 4 months, 10 days.
|
|
I just sent in my order for a black anodized NDS-16A1 lower. This one is going to be SBR'd and is a replacement for the A2 lower I have on my Mk18 CQBR build.
|
|
|
Quoted:
10/13/2015 We just got in an anodized batch of gray NDS-16A1 (full fence) lower receivers, and we graded quite a few as cosmetic BLEMs. The shade of anodizing varies, with some areas darker, and some areas lighter. This variation will not affect function. We have priced these with a $10 discount from regular price. For those who have April/May pre-orders, and who will take a cosmetic BLEM NDS-16A1 to fill the order, please call us at 952-942-1909 or email us at [email protected]. Thanks. Harlan NoDak Spud LLC View Quote Called and emailed about doing just the above ^ |
|
|
Yesterday, Harlan shipped my two xm-gray M16A1 sequential serial numbered receivers for my 653 & 603 builds, order was placed April 27th, starting to get excited :)
|
|
My order for a gray NDS-16A1 was placed on May 8th. It's ready for shipping on 10/15.
|
|
|
Quoted:
While waiting on my gray Nodak lower for my M16A1 parts kit, I decided to go ahead and order a black one for my commercial build A1 to replace the Anderson that it currently has. http://i.imgur.com/kPj1DIt.jpg View Quote I did the exact same thing. I replaced an Anderson lower on my commercial A1 with a black NoDak. I also have had a complete 16A1 kit waiting for a gray NoDak lower which I received a couple of weeks ago, I need to get it together and post a few pics. My commercial gun looks almost exactly like yours. Edited to add pic. Left is commercial build with refinished(black)upper from Apex on black NoDak lower. The rifle on the right is a complete surplus upper with grip and complete stock kit I bought here in the EE on a gray NoDak lower. |
|
11/6/2015
We filled orders this week from a batch of gray anodized NDS-16A1 and NDS-XM16E1 lower receivers, and we are now up to orders taken in mid-June. We have another batch of gray NDS-16A1 and NDS-XM16E1 lower receivers at the anodizer, and these are expected back to us by 11/20/2015. Once this batch of anodized receivers is inspected, we will notify customers whose orders we can fill. The next batch of lower receivers going out for anodizing is for black NDS-16A1 and black NDS-XM16E1 lower receiver pre-orders. We expect to have these back by early December. Harlan NoDak Spud LLC |
|
I just put In an order for a black m17a1 lower and a black 604 upper !!! Off to find parts while I wait
|
|
Any lead times on the 603 uppers? I was told they would be ready around october.
thanks! |
|
Quoted:
Any lead times on the 603 uppers? I was told they would be ready around october. thanks! View Quote We have lots of pre-orders for both gray and black anodized NDS-603 upper receivers. All will be filled before we indicate available inventory status on the website. It looks like we will machine 603 upper forgings in January, 2016 for the pre-orders. Prep and anodizing will add additional time until order fill. (CNC time for the last quarter of 2015 has and will be used for machining of lower receiver forgings.) Harlan NoDak Spud LLC |
|
I got an e-mail from Harlan yesterday saying that my XM Gray NDS-XM16E1 lower was ready. This order was placed on 6/24/15. I talked to Harlan this morning and I asked about the black NDS-16A1 I have ordered and he said it should be ready around Thanksgiving.
|
|
Quoted:
I got an e-mail from Harlan yesterday saying that my XM Gray NDS-XM16E1 lower was ready. This order was placed on 6/24/15. I talked to Harlan this morning and I asked about the black NDS-16A1 I have ordered and he said it should be ready around Thanksgiving. View Quote He also said my black parts should be ready around thanksgiving to mid December. |
|
Well, my NDS-16A1 grey came in today, right at 5 months from order to door. Worth the wait, as always. Now to get the FSB pinned to the GM barrel and get it all together with my M16A1 kit once I pick up the semi-auto parts, a pair of hammer and trigger pins, and a gas tube pin. Would I be pelted with rocks 'n garbage around here if I swapped out the birdcage for a 3-prong flash hider and a "D" stock for the trap door "E" type one? (I will keep the other parts but I just like the earlier look better) Either way; looking forward to getting another retro AR again.
|
|
11/14/2015
We got in a batch of gray NDS-16A1 (full fence), NDS-XM16E1 (partial fence), and NDS-601 (slickside) receivers on 11/12/2015 and we are processing orders for what we can fill. Other than a few customers who have not yet responded to a question of whether or not they still want a receiver, we are at the end of June orders for gray NDS-16A1 receivers, at the end of July orders for NDS-XM16E1 receivers, and at the end of October orders for NDS-601 receivers. The next batch of receivers coming back from anodizing will be for orders of black NDS-16A1 and black NDS-XM16E1 receivers. This batch should be back us within the next two weeks. The following batch going out for anodizing will consist of NDS-16A1, NDS-XM16E1, NDS-601, NDS-604 uppers, and NDS-15U uppers for gray anodizing. This batch should be back to us later in December. We are out of stock on gray NDS-603 uppers receivers until February, 2016. For those who have combo orders in for both a gray lower and a gray NDS-603 upper, we will be sending out an offer to split ship the order, or the customer can tell us to hold the order until we can send a fitted set of the lower and gray NDS-603 upper. We will not have more black NDS-603 uppers until February, 2015, at the earliest. We are still taking pre-orders for NDS-51 (M16A1 type) receiver blanks, which should be ready by the second week of December. Once we have these ready, all those who pre-ordered will get a notification to re-confirm the order. We will start CNC machining of A2 lower forgings later in December, and we expect to have gray and black NDS-16A2 receivers available in the later part of first quarter, 2016. Harlan NoDak Spud LLC |
|
Quoted:
11/14/2015 We got in a batch of gray NDS-16A1 (full fence), NDS-XM16E1 (partial fence), and NDS-601 (slickside) receivers on 11/12/2015 and we are processing orders for what we can fill. Other than a few customers who have not yet responded to a question of whether or not they still want a receiver, we are at the end of June orders for gray NDS-16A1 receivers, at the end of July orders for NDS-XM16E1 receivers, and at the end of October orders for NDS-601 receivers. The next batch of receivers coming back from anodizing will be for orders of black NDS-16A1 and black NDS-XM16E1 receivers. This batch should be back us within the next two weeks. The following batch going out for anodizing will consist of NDS-16A1, NDS-XM16E1, NDS-601, NDS-604 uppers, and NDS-15U uppers for gray anodizing. This batch should be back to us later in December. We are out of stock on gray NDS-603 uppers receivers until February, 2016. For those who have combo orders in for both a gray lower and a gray NDS-603 upper, we will be sending out an offer to split ship the order, or the customer can tell us to hold the order until we can send a fitted set of the lower and gray NDS-603 upper. We will not have more black NDS-603 uppers until February, 2015, at the earliest. We are still taking pre-orders for NDS-51 (M16A1 type) receiver blanks, which should be ready by the second week of December. Once we have these ready, all those who pre-ordered will get a notification to re-confirm the order. We will start CNC machining of A2 lower forgings later in December, and we expect to have gray and black NDS-16A2 receivers available in the later part of first quarter, 2016. Harlan NoDak Spud LLC View Quote Harlan, thank you for the thorough update. |
|
Just picked up my gray NDS-XM16E1 lower (ordered 6/24). I got word today that my black NDS-16A1 lower (ordered 10/15) will be ready soon.
|
|
I called in an order for a few 80% XM lowers in the white, and they were shipped the next day.
The hold up must be in anodizing and maybe marking? |
|
|
11/22/2015
The batch of receivers that were expected to be black anodized turned up to be gray anodized. This will mean a delay of processing for the black anodized receivers orders. We expect to get black anodized receivers about the middle of December. Those with orders for black anodized receivers have been notified. The arrival of more gray anodized receivers has allowed us to get to some August , 2015 orders for NDS-16A1 and NDS-XM16E1 receivers. We have some BLEM gray NDS-16A1 receivers available. These are cosmetic BLEMs and will not have an effect on function. Those who have pre-orders for gray NDS-16A1 receivers can call us at 952-942-1909 to line up for BLEM gray NDS-16A1 receivers. Thanks. Harlan NoDak Spud LLC |
|
|
I've got a blem that I used for a build a couple of years ago. The only blem I could I could find was someone stamped a big "B" on it that's hidden under the pistol grip.
Doc |
|
|
12/9/2015
For the gray NDS-16A1 lower receivers we are working on orders at the very end of August, 2015. We expect to get the batch of black NDS lowers back within the next ten days. Harlan NoDak Spud LLC |
|
Quoted:
12/9/2015 For the gray NDS-16A1 lower receivers we are working on orders at the very end of August, 2015. We expect to get the batch of black NDS lowers back within the next ten days. Harlan NoDak Spud LLC View Quote 12/18/2015 We got in the batch of black anodized NDS lowers and all are spoken for by pre-orders. Another batch of NDS lowers and uppers was sent out yesterday for gray anodizing. These we expect to have back for final inspection by early January, 2016. Harlan NoDak Spud LLC |
|
Quoted:
12/18/2015 We got in the batch of black anodized NDS lowers and all are spoken for by pre-orders. Another batch of NDS lowers and uppers was sent out yesterday for gray anodizing. These we expect to have back for final inspection by early January, 2016. Harlan NoDak Spud LLC View Quote View All Quotes View All Quotes Quoted:
Quoted:
12/9/2015 For the gray NDS-16A1 lower receivers we are working on orders at the very end of August, 2015. We expect to get the batch of black NDS lowers back within the next ten days. Harlan NoDak Spud LLC 12/18/2015 We got in the batch of black anodized NDS lowers and all are spoken for by pre-orders. Another batch of NDS lowers and uppers was sent out yesterday for gray anodizing. These we expect to have back for final inspection by early January, 2016. Harlan NoDak Spud LLC I got one of these black NDS-16A1 lowers and it is on its way to Ident Marking for SBR engraving. It is going on my Mk18 CQBR clone that I built several years ago. This lower is replacing the current A2 lower that is on it. I also just ordered one of the NDS-XM16E1 lowers about a week ago for my 604 build that is in the works. Gotta love those NDS lowers. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.