Site Notices
7/29/2014 4:02:36 PM
Author
Message
schaz42
Offline
Posts: 190
Feedback: 100% (19)
Posted: 4/19/2012 6:01:00 PM
Does anyone have the drawings for the A1 lower forging? I'm trying to secure a build of retro full fence A1 lowers and cannot seem to track any down. Nodak has been a giant help by not selling 80% or even 0% lowers so I'm doing it on my own, but need a little help here. Anyone ever seen one? I also currently run AutoCAD 2012 so if anyone has anything close or a work in progress in CAD that also help alot.

James
xoldsmugglerx
Offline
Posts: 418
Feedback: 100% (26)
Link To This Post
Posted: 4/19/2012 6:07:09 PM
Originally Posted By schaz42:
Does anyone have the drawings for the A1 lower forging? I'm trying to secure a build of retro full fence A1 lowers and cannot seem to track any down. Nodak has been a giant help by not selling 80% or even 0% lowers so I'm doing it on my own, but need a little help here. Anyone ever seen one? I also currently run AutoCAD 2012 so if anyone has anything close or a work in progress in CAD that also help alot.

James


Not sure on the blueprints, but Novak was recently selling 0% a1 forgings that were slightly blemmed. I recall them being a good price. I'm sure if you shot them an email, they may have more. Good luck
jm0502
Offline
Posts: 111
Feedback: 100% (18)
Link To This Post
Posted: 4/19/2012 6:26:40 PM
Someone had one on CNCguns.com a while back. but by the time i saw it the file was no longer available. heres a link for a A2 lower http://www.cncguns.com/projects/ar15lower.html
FlDiveCop71
Screw It!!!...MACHINE GUNS & OPEN-CARRY FOR ALL!!!
Military
Offline
Posts: 3262
Feedback: 100% (5)
Link To This Post
Posted: 4/19/2012 6:27:39 PM
[Last Edit: 4/19/2012 6:28:32 PM by FlDiveCop71]
Not sure exactly what type of info you are looking for...

Roll mark info & placement, or physical / dimensional specs for an M16 lower receiver?

Dimensional specs (blueprint images) can be found through a little work searching the Internet. (sharing them here is kind of a no-no so please don't ask)

As far as roll mark info & placement goes, I'm sure there are a number of members here that can chime-in depending of which manufacturer's info it is that you may be looking for...

Hope this helps...
FlDiveCop71

,——'¯¯';=====±—-
!‚–’¯¯ƒ¹

One is just never enough...
schaz42
Offline
Posts: 191
Feedback: 100% (19)
Link To This Post
Posted: 4/20/2012 4:04:17 PM
Originally Posted By FlDiveCop71:
Not sure exactly what type of info you are looking for...

Roll mark info & placement, or physical / dimensional specs for an M16 lower receiver?

Dimensional specs (blueprint images) can be found through a little work searching the Internet. (sharing them here is kind of a no-no so please don't ask)

As far as roll mark info & placement goes, I'm sure there are a number of members here that can chime-in depending of which manufacturer's info it is that you may be looking for...

Hope this helps...
FlDiveCop71


Roll mark placement would be a plus, ive got those for the charter arms lower but a colt one would be awesome!!

What im really after though is the dimensioning drawing for the A1 lower, a plus to that would be the forging halves dimensions. I plan on manufacturing some 80% A1 lowers for the retro scene that obviously don't already have roll marks on them, for the ultimate clone if you will and need these prints to begin.

James
schaz42
Offline
Posts: 192
Feedback: 100% (19)
Link To This Post
Posted: 4/20/2012 8:11:58 PM
[Last Edit: 4/20/2012 8:13:14 PM by schaz42]
Originally Posted By FlDiveCop71:
Not sure exactly what type of info you are looking for...

Roll mark info & placement, or physical / dimensional specs for an M16 lower receiver?

Dimensional specs (blueprint images) can be found through a little work searching the Internet. (sharing them here is kind of a no-no so please don't ask)

As far as roll mark info & placement goes, I'm sure there are a number of members here that can chime-in depending of which manufacturer's info it is that you may be looking for...

Hope this helps...
FlDiveCop71[/

Whoops double post

James