User Panel
User Panel
User Panel
USA
|
Posted: 6/21/2022 6:46:42 PM EDT
[#1]
Quote HistoryOriginally Posted By MPERacing: Almost looks like an early SP1 upper with a later SP1 barrel. Can you take and post more pics of the upper itself and is there any forge codes or markings? Only markings I could find posted in first two pics below:    
|
|
|
|
Posted: 6/21/2022 6:48:52 PM EDT
[#2]
How about pictures of the port door area and up by the sight wheel?
|
|
|
|
USA
|
Posted: 6/21/2022 6:53:00 PM EDT
[#3]
Quote HistoryOriginally Posted By MPERacing: How about pictures of the port door area and up by the sight wheel?    
|
|
|
|
Posted: 6/21/2022 8:58:39 PM EDT
[#4]
So, I’m thinking it actually might be all original maybe 1975 era. Early-mid 70’s Colt use the Bell and C FSB and the Chrome Bore roll marks came along 75-76 ish and there was no forge code uppers in that same time frame. Without a BCG, charging handle, port door and handguards I’d value it between $700-900 depending on the person and day.
|
|
|
|
USA
|
Posted: 6/21/2022 9:53:17 PM EDT
[#5]
Quote HistoryOriginally Posted By MPERacing: So, I’m thinking it actually might be all original maybe 1975 era. Early-mid 70’s Colt use the Bell and C FSB and the Chrome Bore roll marks came along 75-76 ish and there was no forge code uppers in that same time frame. Without a BCG, charging handle, port door and handguards I’d value it between $700-900 depending on the person and day. Thank you! |
|
|
USA
|
Posted: 6/24/2022 3:56:50 PM EDT
[Last Edit: Machobuck]
[#6]
Does anyone know what a mint Colt Car locking ring goes for? I saw a few listed around $50 a few years ago, but I'm not sure how accurate that was.
|
|
|
|
Posted: 6/24/2022 4:18:00 PM EDT
[#7]
Quote HistoryOriginally Posted By Machobuck: Does anyone know what a mint Colt Car locking ring goes for? I saw a few listed around $50 a few years ago, but I'm not sure how accurate that was. https://i.imgur.com/Q0eJvhN.jpeg That’s about what I see them going for |
|
|
|
ND, USA
|
Posted: 6/25/2022 3:31:24 PM EDT
[#8]
test
|
|
|
ND, USA
|
Posted: 6/25/2022 3:41:06 PM EDT
[#9]
I am requesting an appraisal value on the following and a model number if possible. thank you
           
|
|
|
USA
|
Posted: 6/25/2022 4:28:23 PM EDT
[#10]
I have a SP1 carbine that I got back in the 80's. I shot it but never modified it. I think it is all original. What is the value? I believe it was made in approximately 1981.
Thanks for your thoughts, Steve I am having trouble posting pictures, so how do I post photos? I am not real computer literate. Thanks I can email them to someone who might be able to post. |
|
|
|
Posted: 6/25/2022 6:38:57 PM EDT
[#11]
Quote HistoryOriginally Posted By ssc: I have a SP1 carbine that I got back in the 80's. I shot it but never modified it. I think it is all original. What is the value? I believe it was made in approximately 1981. Thanks for your thoughts, Steve I am having trouble posting pictures, so how do I post photos? I am not real computer literate. Thanks I can email them to someone who might be able to post. I see them at the gun shows in the $2400 to $3000 price range - hope this helps |
|
|
|
USA
|
Posted: 6/25/2022 7:57:36 PM EDT
[#12]
Quote HistoryOriginally Posted By M16indiana: I see them at the gun shows in the $2400 to $3000 price range - hope this helps Thank you. Cheers, Steve |
|
|
ND, USA
|
Posted: 6/25/2022 8:03:59 PM EDT
[#13]
thank you
|
|
|
AZ, USA
|
Posted: 6/29/2022 1:37:31 PM EDT
[Last Edit: 1NAVYCHIEF-RET]
[#14]
I have been offered a COLT N 1 Carbine Stock from a friend.
I would say in VG condition, the Checkering on the Butt is still crisp. No digs or scraps. Sorry no pic's yet I DON'T think the 6-Position Buffer Tube is Colt, but it fits very Tight, and the stock slides very smoothly, with no wobble. So, what do these go for today? He is asking $100. Thanks in advance. |
|
|
|
Posted: 6/29/2022 7:26:04 PM EDT
[Last Edit: HipSh0T]
[#15]
Quote HistoryOriginally Posted By 1NAVYCHIEF-RET: I have been offered a COLT N 1 Carbine Stock from a friend. I would say in VG condition, the Checkering on the Butt is still crisp. No digs or scraps. Sorry no pic's yet I DON'T think the 6-Position Buffer Tube is Colt, but it fits very Tight, and the stock slides very smoothly, with no wobble. So, what do these go for today? He is asking $100. Thanks in advance. The 6 position tube is commercial, Colt used 2 then eventually 4 position for the most part. $100.00 for just the N marked stock body? That's like top price for excellent condition +, I'd offer $75-80 if you got to have it. That commercial buffer tube is dime a dozen parts bin, maybe $10-15. Who knows though, maybe in a year or 2 they will double in price so try to come together on a price, will he negotiate? I guess if you want the commercial tube with it, $90.00 isn't too far fetched. |
|
|
|
OH, USA
|
Posted: 7/5/2022 2:11:21 AM EDT
[Last Edit: Chowser]
[#16]
Gone
|
|
|
OR, USA
|
Posted: 7/9/2022 3:09:35 PM EDT
[#17]
What’s the value of A colt 6320?
|
|
|
OH, USA
|
Posted: 7/9/2022 10:23:18 PM EDT
[Last Edit: Norcakfreak]
[#18]
Just snagged this off a guy. It's a Palmetto Armory BH15A1. Super hard to find any info. The upper is a Martin Marietta with L, H on one side and A on the other. The trigger is marked with a C, 3.
What could this be worth?     
|
|
|
|
Posted: 7/10/2022 2:16:16 PM EDT
[Last Edit: HipSh0T]
[#19]
Quote HistoryOriginally Posted By Norcakfreak: Just snagged this off a guy. It's a Palmetto Armory BH15A1. Super hard to find any info. The upper is a Martin Marietta with L, H on one side and A on the other. The trigger is marked with a C, 3. What could this be worth? https://photos.app.goo.gl/HCtL6Vr284eMo36p6 https://photos.app.goo.gl/vAgj718tFaazMALSA https://photos.app.goo.gl/zBwrM6Zcizbarcpg7 https://photos.app.goo.gl/pfobH8DU1dWaKG1u6 https://photos.app.goo.gl/yfZWWmKYE9P88JbX7 Your stripped Lower Receiver Alone is worth $1500.00 or more to Connecticut and Massachusetts because it's pre ban. Look like your Fire Control Group is Colt and likely the entire Lower small parts is. |
|
|
|
OH, USA
|
Posted: 7/10/2022 2:52:16 PM EDT
[#20]
That's awesome! I'm tearing it down tonight and I'll get more pictures. Curious to see more about the barrel and bcg. Hoping it's all Colt.
|
|
|
|
Posted: 7/11/2022 1:16:33 AM EDT
[Last Edit: HipSh0T]
[#21]
Quote HistoryOriginally Posted By Norcakfreak: That's awesome! I'm tearing it down tonight and I'll get more pictures. Curious to see more about the barrel and bcg. Hoping it's all Colt. You asked of approximate value of parts and how much would we pay for it in your post. If your barrel is Colt, your looking at $2400.00 in parts value including the lower receiver, I'd have no problem paying $1500.00 for that gun in the wild knowing I could turn a profit on the lower alone. |
|
|
|
OH, USA
|
Posted: 8/12/2022 6:16:44 PM EDT
[#22]
Quote HistoryOriginally Posted By HipSh0T: You asked of approximate value of parts and how much would we pay for it in your post. If your barrel is Colt, your looking at $2400.00 in parts value including the lower receiver, I'd have no problem paying $1500.00 for that gun in the wild knowing I could turn a profit on the lower alone. I haven't torn out the barrel, so I'm not sure what it is to be honest. I did verify that all of the internals are mil surp Colt. The FCG, the BCG, and the buffer assembly are all Colt. The upper is definitely a Martin Marietta mil surp, the stock is a later Colt stock, and the hand guards are Colt m16a2 hand guards. It also has an m16a1 grip on it now. I just need to verify the barrel. Definitely a nice piece of history! Now to decide what I want to do with it 🤔 |
|
|
|
Posted: 8/13/2022 8:38:41 PM EDT
[Last Edit: qbateaux]
[#23]
What are plain jane SP1s going for (not gunbroker) now?
... Mid 1970's production, not a safe queen, but rarely shot, nothing special about it.  Attached File |
|
|
|
|
Posted: 8/21/2022 7:04:30 AM EDT
[#24]
What are Sendra lowers worth? It's a 3 digit serial # with a Rock Island Armory rollmark that looks like it was done on a Friday. The lower parts were swapped with a new semi auto kit.
|
|
|
|
OH, USA
|
Posted: 8/22/2022 8:29:24 AM EDT
[#25]
value of 603 upper, charging handle and bcg.
ignore the lower and the junk 16" barrel, will be taking the barrel off. and lower being demilled.           |
|
|
|
Posted: 8/22/2022 2:19:39 PM EDT
[#26]
Quote HistoryOriginally Posted By Chowser: value of 603 upper, charging handle and bcg. ignore the lower and the junk 16" barrel, will be taking the barrel off. and lower being demilled. https://i.postimg.cc/hGrSzjHx/IMG-7339.jpg https://i.postimg.cc/vHgHqGVF/IMG-7349.jpg https://i.postimg.cc/PqzqWK8C/IMG-7350.jpg https://i.postimg.cc/3R8xnpgn/IMG-7351.jpg https://i.postimg.cc/Xv0JBtXM/IMG-7352.jpg https://i.postimg.cc/tTBCfTky/IMG-7353.jpg https://i.postimg.cc/gjrkPWth/IMG-7354.jpg https://i.postimg.cc/MH4Z6FgF/IMG-7355.jpg https://i.postimg.cc/t4FRbDkB/IMG-7356.jpg https://i.postimg.cc/kX0MLLQV/IMG-7357.jpg Upper - 275.00 - 300.00 CH - 40.00 -50.00 BCG 150.00 - 180.00 If selling all to the same person I'd do like $425.00 - $450.00 or something plus shipping. |
|
|
|
|
Posted: 8/22/2022 3:00:29 PM EDT
[Last Edit: HipSh0T]
[#27]
Quote HistoryOriginally Posted By JTM20: What are Sendra lowers worth? It's a 3 digit serial # with a Rock Island Armory rollmark that looks like it was done on a Friday. The lower parts were swapped with a new semi auto kit. https://i.imgur.com/dcYHsEgh.jpg It's only worth a premium if it's verified preban to CT and MA, if it is your looking at 750.00 - 1500.00 depending on brand, buyer, etc. To most other states it's not worth much more than any other receiver, it's a win-win for you and guys behind the lines if you decide to sell it. |
|
|
|
CA, USA
|
Posted: 8/23/2022 11:36:38 AM EDT
[#28]
What are Norinco manufactured A1 uppers worth? This one came off a M16A1ish clone and def has that been there done that appearance to it.
Not so sure USGI purists would find much value in it, however someone wanting to make a clone of a Norinco M16A1 (clone of a clone lol) might be interested.      " />
|
|
|
|
Posted: 8/25/2022 1:11:48 AM EDT
[Last Edit: tal35]
[#29]
I have a few Older uppers I would like to get the value and age on. 2 are carbine, one carbine is big hole front and slabside upper. All of the barrels are either marked C MP B or C MP Bore, The uppers are on the 20 " have no forge markings, one upper has a K forge marking and one is CM . They dont have bolt carriers in them. Just like to find out about what they are each worth and what is the date range on the units. Thank you
 Attached File Attached File Attached File Attached File |
|
|
|
|
Posted: 8/26/2022 2:48:38 PM EDT
[Last Edit: HipSh0T]
[#30]
Quote HistoryOriginally Posted By tal35: I have a few Older uppers I would like to get the value and age on. 2 are carbine, one carbine is big hole front and slabside upper. All of the barrels are either marked C MP B or C MP Bore, The uppers are on the 20 " have no forge markings, one upper has a K forge marking and one is CM . They dont have bolt carriers in them. Just like to find out about what they are each worth and what is the date range on the units. Thank youhttps://www.ar15.com/media/mediaFiles/15365/DSC05522_jpg-2502021.JPGhttps://www.ar15.com/media/mediaFiles/15365/DSC05523_jpg-2502022.JPGhttps://www.ar15.com/media/mediaFiles/15365/DSC05524_JPG-2502023.JPGhttps://www.ar15.com/media/mediaFiles/15365/DSC05521_jpg-2502024.JPG If you email me with a few more detailed pictures of the barrel markings, and a little more detailed info on which barrel is on each upper I can give you better pricing but about $800.00 per upper without bcg and charging handle is about right. I'm confident that you'd pull more than that parting them out because upper recivers are hot right now and I wouldn't be surprised if a few of yours fetched $350.00 + ETA : The 20" uppers appear to be home builds because the receivers are significantly older than the barrel markings you provided. |
|
|
|
|
Posted: 8/26/2022 9:00:12 PM EDT
[#31]
So they couldnt have been old military builds?
|
|
|
|
|
Posted: 8/26/2022 10:19:45 PM EDT
[#32]
Quote HistoryOriginally Posted By tal35: So they couldnt have been old military builds? Not very likely, you have late 60's receivers on your 2 20" with one having a later delta ring, mid 70's to 80's barrel and a mid 60's 3 prong. The good news is you have all USGI parts except for the SP1 big hole upper, you'd be best served to part them out. |
|
|
|
|
Posted: 8/26/2022 11:28:48 PM EDT
[#33]
I have had them 20+ years so it must have been done long ago, I have not done enything to them.
|
|
|
|
OH, USA
|
Posted: 8/27/2022 12:00:13 AM EDT
[#34]
Anyone know how old and the value of this JC BCG?
Thanks      |
|
|
|
Posted: 8/27/2022 12:44:00 AM EDT
[#35]
Quote HistoryOriginally Posted By Chowser: Anyone know how old and the value of this JC BCG? Thanks https://i.postimg.cc/FHVdgQwf/05-F6-FB9-A-F8-AE-4-DB4-99-E8-911-E0-FCD711-C.jpg https://i.postimg.cc/d0Q75xK5/2-BBD32-BB-94-CB-4-BF0-AD46-6-F4159-F560-CB.jpg https://i.postimg.cc/qMnCqKLx/4-CA2-E9-B6-27-BC-42-F5-A8-EA-CCE46-EDC6-D6-F.jpg https://i.postimg.cc/sgrGh2Hd/CAA0-DD60-7-C45-49-CC-A2-C2-9-DD137073276.jpg https://i.postimg.cc/SQHMmdWK/FD7-F67-AE-81-D7-4962-89-EF-66-DEC82-DFA89.jpg USGI replacement part, probably early 1980's - $150.00 +\- |
|
|
|
NC, USA
|
Posted: 9/2/2022 8:21:05 AM EDT
[#36]
I recently acquired three rifle length barrels with FSP. triangle retainer, barrel nut, sling swivel. The tops read 3S679 MP 5.56 NATO 1/7 and FNMI MP 5.56 NATO 1/7. They have a nice patina to them, rifling looks good. I can text someone pictures if they need to look at them. Just wondering on what they are worth for a fair price, even to give someone a deal, prices people are charging for stuff these days is out of control. Thanks
|
|
|
|
Posted: 9/2/2022 10:06:10 AM EDT
[Last Edit: HipSh0T]
[#37]
Quote HistoryOriginally Posted By limited04: I recently acquired three rifle length barrels with FSP. triangle retainer, barrel nut, sling swivel. The tops read 3S679 MP 5.56 NATO 1/7 and FNMI MP 5.56 NATO 1/7. They have a nice patina to them, rifling looks good. I can text someone pictures if they need to look at them. Just wondering on what they are worth for a fair price, even to give someone a deal, prices people are charging for stuff these days is out of control. Thanks They are both FN barrels, your probably looking at $350.00 to $450.00 each depending on condition, I'd ask a little more for the FNMI over the 3S679 cage code if the conditions are similar. |
|
|
|
|
Posted: 9/3/2022 5:04:34 PM EDT
[Last Edit: zentradi]
[#38]
 Attached File Attached FileHave five sets of six hole carbine handguards left, single shield. I think they are Colt but not sure. One set is new in the plastic bag, but the rest seem like new and or lightly used - gas tube black powder on the inside heat shield, no damage. They are all the same, made of some type of material nicer than the old carbine handguards that came with a Bushy back in the day. Doe these go for anything? They have a ridge on one side and an indentation on the other. I like the way they feel though, but MLOK they are not. I found this link, checking, https://www.ar15.com/forums/ar-15/Comparing-Colt-Carbine-Handguards-Big-Pictures/123-491991/ They all check out colt. 1 set NIW 3 sets excellent 1 has a scratch on one of the ridges because I used it on my AR until I scored some M4 double shields. |
|
|
|
|
Posted: 9/4/2022 3:41:42 AM EDT
[Last Edit: HipSh0T]
[#39]
Quote HistoryOriginally Posted By zentradi: https://www.ar15.com/media/mediaFiles/14200/IMG_20220903_135541841_jpg-2513250.JPG https://www.ar15.com/media/mediaFiles/14200/IMG_20220903_134539602_jpg-2513251.JPG Have five sets of six hole carbine handguards left, single shield. I think they are Colt but not sure. One set is new in the plastic bag, but the rest seem like new and or lightly used - gas tube black powder on the inside heat shield, no damage. They are all the same, made of some type of material nicer than the old carbine handguards that came with a Bushy back in the day. Doe these go for anything? They have a ridge on one side and an indentation on the other. I like the way they feel though, but MLOK they are not. I found this link, checking, https://www.ar15.com/forums/ar-15/Comparing-Colt-Carbine-Handguards-Big-Pictures/123-491991/ They all check out colt. 1 set NIW 3 sets excellent 1 has a scratch on one of the ridges because I used it on my AR until I scored some M4 double shields. If they are Colt, your looking at $75 - $100 per set depending on condition on the 4 take off sets. Might need better pictures to 100% authenticate them as all Colts, but looking good from what I see. I've sold NIW 6 hole Colts for $125.00 during the panic, so you might be able to get something close to that for them. |
|
|
|
PA, USA
|
Posted: 9/5/2022 7:22:46 PM EDT
[#40]
What are Single Rib Slip Rings going for?
https://imgur.com/a/cw3QVex |
|
|
|
Posted: 9/6/2022 5:42:33 PM EDT
[#41]
Quote HistoryOriginally Posted By beefboi99: What are Single Rib Slip Rings going for? https://imgur.com/a/cw3QVex $75.00 +/- |
|
|
|
|
Posted: 9/8/2022 8:21:14 PM EDT
[#42]
Can anyone tell me what I have here other than the obvious A2 parts. Picked up the whole box from a guy who reached out on a WTB ad for a C7 upper.
 Attached File Attached File Attached File Attached File Attached File |
|
|
|
|
Posted: 9/8/2022 8:22:20 PM EDT
[#43]
Quote HistoryOriginally Posted By uniquesnd: Can anyone tell me what I have here other than the obvious A2 parts. Picked up the whole box from a guy who reached out on a WTB ad for a C7 upper. https://www.ar15.com/media/mediaFiles/347041/6F127A1A-AD08-462B-8FFA-E7D53162BA89_jpe-2519184.JPGhttps://www.ar15.com/media/mediaFiles/347041/D91DA4BA-8361-4B8F-ADB7-2FA0F4A0615D_jpe-2519186.JPGhttps://www.ar15.com/media/mediaFiles/347041/18BBB35B-1789-43CB-8F6B-60BD7F31528D_jpe-2519187.JPGhttps://www.ar15.com/media/mediaFiles/347041/1FA295EA-84EF-43DB-89A4-51EE78676640_jpe-2519189.JPGhttps://www.ar15.com/media/mediaFiles/347041/1A4E2914-807C-443A-9A5A-E215029C9CA3_jpe-2519190.JPG  Attached File Attached File Attached File |
|
|
|
PA, USA
|
Posted: 9/27/2022 10:03:25 PM EDT
[Last Edit: jab13]
[#44]
Howdy, trying to price some parts for an old friend who was an Army armorer from the 1960's to the 1980's. This stuff has been boxed up in his shop for 30 years, some of the stocks were coated in dust, the 601 charging handles wrapped up in old paper. He was planning on taking the parts to some local shows later in the year, but didn't want to sell in bulk as he had been burnt before by some resellers. [Uppers and carbine stock already gone]
Need help with prices for original: -A1 3 prong flash hiders -A1 full cage flash hiders -601 charging handles -Slip/Delta rings -A1 stocks (Types D and E) -5.56 marked Colt mags -.223 marked Colt mags     Thanks in advance for any help with current market pricing! Edit - Full Size Pics here: https://imgur.com/a/Il8TNTC |
|
|
|
Posted: 10/13/2022 1:06:35 AM EDT
[Last Edit: Hub1]
[#45]
This Aimpoint 5000 was on a PCC I picked up. The optic is in really great condition but there's no box or manuals. Besides the fact that these were used during the time of Mogadishu and Blackhawk Down I couldn't find much information on if they're rare, valuable or hard to come by. The battery life (or lack thereof) means its not something i would keep on the pistol. Any info on the value or additional useful info?
 Attached File |
|
|
|
CT, USA
|
Posted: 10/21/2022 11:27:20 PM EDT
[Last Edit: dbctny]
[#46]
Received this upper on a Pre-Ban PWA. Based on the markings it seems that it may be a Colt upper? It has BCG and CH also.
      
|
|
|
MA, USA
|
Posted: 10/24/2022 2:05:49 PM EDT
[#47]
Quote HistoryOriginally Posted By Hub1: This Aimpoint 5000 was on a PCC I picked up. The optic is in really great condition but there's no box or manuals. Besides the fact that these were used during the time of Mogadishu and Blackhawk Down I couldn't find much information on if they're rare, valuable or hard to come by. The battery life (or lack thereof) means its not something i would keep on the pistol. Any info on the value or additional useful info?https://www.ar15.com/media/mediaFiles/408307/81-AB326-B-ABA9-4-CB0-B5-EB-2-B927-A1-CB-2561217.JPG I have seen them sell for $500+ and I have seen them advertised for $1200 on eBay. |
|
|
|
Posted: 10/29/2022 6:39:16 PM EDT
[#48]
Quote HistoryOriginally Posted By sln583: Those are very sought after by us guys building Gothic Serpent clones. I have seen them sell for $500+ and I have seen them advertised for $1200 on eBay. Thank you so much for the info! |
|
|
|
WA, USA
|
Posted: 11/16/2022 11:31:14 AM EDT
[#49]
FIRST, I’m not sure if I am even thinking or planning to sell them anytime soon, but if I did, down the road, I’d sell them them within the EE section. I will not reply to any IMs to this thread asking if I am selling them. I’m not hard up for money or anything, I just have a ton of stuff floating around the garage that I’d like to know their current non “Gunbroke” prices.
IF THIS IS A VIOLATION, PLEASE DELETE SINCE I’M NOT TRYING TO PULL A FAST ONE HERE!! This is an appraisal request for two NONE ORIGINAL AR-15 retro items. For the first item, I bought a couple of slick sided “retro” AR-15 stripped upper receivers from Fulton Armory about 8-9 years ago and I have an odd question on them. First they’re newer production, well newer when I bought them years ago, but on the left side of those receivers, where the charging handle “claw” locks into position, it is only milled out into a proper sized circle WITHOUT the mill cut going all the way upwards like on my other Colt and NDS slick sided and A1 upper receivers. Were these upper sold as seconds? I honestly don’t remember them being sold as possible rejects. They have the cut “A,” forging code, which I believe is for Anchor Harvey Aluminum manufacturers on the right side of the carrying handle and they are not anodized. They appear to have a flat BLACK cerakote or duracoat type finish on them. As for the second question, I have a couple of Brownells retro AR15 “Proto” barrel assemblies with the front sight base that were sold as seconds, but “I” cannot find the flaw(s) that made them seconds. Anyway, I bought them about two years ago, at the peak of the pandemic of 2020. None of them have been used or assembled. What would be the going price on these items? Thanks!! |
|
|
|
Posted: 11/19/2022 6:39:43 PM EDT
[#50]
Interested in the value of a Colt R6550 Govt Model with bayo lug. Basically NIB but without the box or accessories and appears to be unfired other than from the factory.
Thanks |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
