User Panel
User Panel
User Panel
|
Posted: 9/16/2020 7:14:29 AM EDT
[#1]
Quote HistoryOriginally Posted By lsujim: @Leonitus What length barrel and rail are you running here? QC10 4.5” MLok rail Rainier Ultramatch 5” fluted barrel |
|
|
|
|
Posted: 9/16/2020 7:45:09 AM EDT
[#2]
|
|
|
|
TX, USA
|
Posted: 9/16/2020 1:55:11 PM EDT
[#3]
|
|
|
|
Posted: 9/17/2020 7:31:26 PM EDT
[Last Edit: Ironhandjohn]
[#4]
...
|
|
|
|
|
Posted: 9/18/2020 9:17:52 PM EDT
[#5]
What vendor did you buy the handguards from, John? I need a spare pair.
|
|
|
|
|
Posted: 9/18/2020 11:25:07 PM EDT
[#6]
Quote HistoryOriginally Posted By Clint50: What vendor did you buy the handguards from, John? I need a spare pair. I swapped a pair of M4s to a guy in GD who just bought a Bushmaster A3 for his skinnies. I have a set that are missing the heat-shields, and there is a slot from where their previous owner mounted an A1 grip, if you're interested. I don't know where to look for the heat-shields, but then I'm not terribly resourceful sometimes. |
|
|
|
|
Posted: 9/19/2020 8:49:30 AM EDT
[#7]
|
|
|
|
|
Posted: 9/19/2020 9:47:47 AM EDT
[#8]
Quote HistoryOriginally Posted By doc_Zox: https://www.AR15.Com/media/mediaFiles/3097/80B20D43-3D24-45EC-ADE6-82216E10AFCC-1598166.jpg I love it. |
|
|
|
|
Posted: 9/20/2020 12:53:15 AM EDT
[#9]
|
|
|
|
|
Posted: 9/20/2020 2:36:54 AM EDT
[Last Edit: Clint50]
[#10]
Quote HistoryDang, $10/pair?? I just ordered a pair of those handguards and a pair of the XM triangular handguards, too. |
|
|
|
|
Posted: 9/20/2020 5:47:32 AM EDT
[#11]
Quote HistoryOriginally Posted By mnellis3023: This is AR-15ish My LWRC SMG45 W/V1 mags, no failures and can hold a 2'' or less group at 40 yards without trying very hard. https://i.ibb.co/0t0whWH/20200901-225202.jpghttps://i.ibb.co/x1w4qBt/20200901-225021.jpg https://i.ibb.co/ZYybc9m/20200828-052316.jpg https://i.ibb.co/sg5krxK/20200828-051654.jpg https://i.ibb.co/Np4j6hR/20200828-052821.jpg https://i.ibb.co/fnwG5T5/20200828-052522.jpg That's beautiful. |
|
|
|
PA, USA
|
Posted: 9/23/2020 12:47:59 AM EDT
[Last Edit: Wvishome]
[#12]
The start of my first build.... My stupid ass just ordered a Vortex UH-1 Gen II for it.
 Considering rattle canning darker gray parts (brace, grip, mags....a lighter nickel color and wear will just be character. 
|
|
|
|
Posted: 9/23/2020 10:32:47 AM EDT
[#13]
Quote HistoryOriginally Posted By Wvishome: The start of my first build.... My stupid ass just ordered a Vortex UH-1 Gen II for it. Considering rattle canning darker gray parts (brace, grip, mags....a lighter nickel color and wear will just be character. https://www.linkpicture.com/q/Screenshot_20200917-004410_Gallery_1.jpg Where’d you find the UH-1 in stock? |
|
|
|
LA, USA
|
Posted: 9/23/2020 9:56:37 PM EDT
[#14]
I like they Grey parts. Goes good with the barrel.
|
|
|
|
Posted: 9/23/2020 11:38:18 PM EDT
[#15]
Quote HistoryOriginally Posted By doc_Zox: https://www.AR15.Com/media/mediaFiles/3097/80B20D43-3D24-45EC-ADE6-82216E10AFCC-1598166.jpg That's funny. I was just reading recently about how someone wanted a broom handle grip adapter. They were building one of those straight pull "solo 300" builds. |
|
|
|
TX, USA
|
Posted: 9/24/2020 2:47:00 PM EDT
[#16]
     I'm moving back to NYS after being gone for a long time and rather than defile my little pistol with their compliance I'm going to try to just sell it locally here. Anderson "pistol marked" lower Battle Arms Development BAD-CASS-SA-ST Ambi Short Throw Combat Safety Selector Magpul K2 Grip Magpul BAD Lever Law Tactical Folding Stock adapter CMC Flat Trigger Anti-Walk Trigger Pins Thordsen Customs Enhanced buffer tube Nickel Boron BCG Devil Dog Concepts Hard Charger Weapontech STARS Comp/Flash hider Geissele 7" Super Modular Rail MK8 (M-lok) Geissele "Bomb Proof" Gas Block Magpul MBUS Primary Arms Red Dot & Riser Haley Strategic WML Magpul M-Lok Offset Light Mount (Aluminum) As a bonus here is a blast from the past, my old umbrella Axis raptor style charging handle: 
|
|
|
TX, USA
|
Posted: 9/25/2020 7:55:52 PM EDT
[Last Edit: webbslinger]
[#17]
AR45 Storm Trooper
 |
|
|
|
Posted: 9/25/2020 11:05:52 PM EDT
[Last Edit: togadelic]
[#18]
Quote HistoryOriginally Posted By PeoplePhobic: http://i.imgur.com/bTOHGnd.jpg http://i.imgur.com/wQikELq.jpg http://i.imgur.com/TMX1SXO.jpg http://i.imgur.com/jJxT3iJ.jpg http://i.imgur.com/qLCHdBL.jpg I'm moving back to NYS after being gone for a long time and rather than defile my little pistol with their compliance I'm going to try to just sell it locally here. Anderson "pistol marked" lower Battle Arms Development BAD-CASS-SA-ST Ambi Short Throw Combat Safety Selector Magpul K2 Grip Magpul BAD Lever Law Tactical Folding Stock adapter CMC Flat Trigger Anti-Walk Trigger Pins Thordsen Customs Enhanced buffer tube Nickel Boron BCG Devil Dog Concepts Hard Charger Weapontech STARS Comp/Flash hider Geissele 7" Super Modular Rail MK8 (M-lok) Geissele "Bomb Proof" Gas Block Magpul MBUS Primary Arms Red Dot & Riser Haley Strategic WML Magpul M-Lok Offset Light Mount (Aluminum) As a bonus here is a blast from the past, my old umbrella Axis raptor style charging handle: http://i.imgur.com/QyzXmwn.jpg that is a nice build right there how long is barrel? |
|
|
|
TX, USA
|
Posted: 9/26/2020 1:20:58 AM EDT
[#19]
Quote HistoryOriginally Posted By togadelic: that is a nice build right there how long is barrel? |
|
|
|
Posted: 9/26/2020 9:58:22 AM EDT
[#20]
Quote HistoryOriginally Posted By PeoplePhobic: http://i.imgur.com/bTOHGnd.jpg http://i.imgur.com/wQikELq.jpg http://i.imgur.com/TMX1SXO.jpg http://i.imgur.com/jJxT3iJ.jpg http://i.imgur.com/qLCHdBL.jpg I'm moving back to NYS after being gone for a long time and rather than defile my little pistol with their compliance I'm going to try to just sell it locally here. Anderson "pistol marked" lower Battle Arms Development BAD-CASS-SA-ST Ambi Short Throw Combat Safety Selector Magpul K2 Grip Magpul BAD Lever Law Tactical Folding Stock adapter CMC Flat Trigger Anti-Walk Trigger Pins Thordsen Customs Enhanced buffer tube Nickel Boron BCG Devil Dog Concepts Hard Charger Weapontech STARS Comp/Flash hider Geissele 7" Super Modular Rail MK8 (M-lok) Geissele "Bomb Proof" Gas Block Magpul MBUS Primary Arms Red Dot & Riser Haley Strategic WML Magpul M-Lok Offset Light Mount (Aluminum) As a bonus here is a blast from the past, my old umbrella Axis raptor style charging handle: http://i.imgur.com/QyzXmwn.jpg This is probably the hardest I've ever gotten over a poverty pony.  That thing is awesome. |
|
|
|
|
Posted: 9/26/2020 10:21:36 AM EDT
[#21]
Quote HistoryOriginally Posted By beitodesstrafe: This is probably the hardest I've ever gotten over a poverty pony. That thing is awesome. Quote HistoryOriginally Posted By beitodesstrafe: Originally Posted By PeoplePhobic: http://i.imgur.com/bTOHGnd.jpg http://i.imgur.com/wQikELq.jpg http://i.imgur.com/TMX1SXO.jpg http://i.imgur.com/jJxT3iJ.jpg http://i.imgur.com/qLCHdBL.jpg I'm moving back to NYS after being gone for a long time and rather than defile my little pistol with their compliance I'm going to try to just sell it locally here. Anderson "pistol marked" lower Battle Arms Development BAD-CASS-SA-ST Ambi Short Throw Combat Safety Selector Magpul K2 Grip Magpul BAD Lever Law Tactical Folding Stock adapter CMC Flat Trigger Anti-Walk Trigger Pins Thordsen Customs Enhanced buffer tube Nickel Boron BCG Devil Dog Concepts Hard Charger Weapontech STARS Comp/Flash hider Geissele 7" Super Modular Rail MK8 (M-lok) Geissele "Bomb Proof" Gas Block Magpul MBUS Primary Arms Red Dot & Riser Haley Strategic WML Magpul M-Lok Offset Light Mount (Aluminum) As a bonus here is a blast from the past, my old umbrella Axis raptor style charging handle: http://i.imgur.com/QyzXmwn.jpg This is probably the hardest I've ever gotten over a poverty pony. That thing is awesome. Me too!!!!
|
|
|
|
TX, USA
|
Posted: 9/27/2020 3:35:42 AM EDT
[Last Edit: PHUMC_REDWOOD]
[#22]
|
|
|
MO, USA
|
Posted: 10/1/2020 4:55:57 AM EDT
[#23]
|
|
|
|
Posted: 10/1/2020 5:27:12 PM EDT
[#24]
Quote HistoryOriginally Posted By Extraordinaire: https://i.imgur.com/TpLl5pU.jpg Damn that's clean. Nice build. I added a folder to this little guy. As much as I don't care for them, it serves a practical purpose here.  
|
|
|
|
|
Posted: 10/2/2020 12:34:00 PM EDT
[Last Edit: Vehemence]
[#25]
|
|
|
|
TX, USA
|
Posted: 10/2/2020 8:24:24 PM EDT
[#26]
Finished my 11.5 AERO build
needed a rear sight and liner comp  IMG_4212 by John Hermesmeyer, on Flickr IMG_4214 by John Hermesmeyer, on Flickr
|
|
|
|
Posted: 10/3/2020 3:46:46 PM EDT
[#27]
Got 'er done, minus final decision on MD. I also noticed that I just have daylight between the Arisaka finger stop screw and the GB, and fit a business card between them. Deciding if I want to take it off and attempt to shorten the screw a bit.
Kinda wishing now that I wouldve gone with an ODG ACOG and ODG Streamlight and LCS combo, but Im hoping itll grow on me. Just need to add the BFG Vickers sling when I get it  Attached File Attached File Attached File Attached File |
|
|
|
|
Posted: 10/3/2020 8:05:04 PM EDT
[#28]
|
|
|
|
MN, USA
|
Posted: 10/4/2020 9:56:41 AM EDT
[#29]
Quote HistoryOriginally Posted By tater22: https://www.AR15.Com/media/mediaFiles/118189/D1530E09-FEDE-4433-962B-86B249811537_jpe-1618737.JPG Did you convert a SBA PDW to maxim CQB? |
|
|
|
Posted: 10/4/2020 12:22:56 PM EDT
[Last Edit: tater22]
[#30]
Quote HistoryOriginally Posted By dray85: Did you convert a SBA PDW to maxim CQB? Quote HistoryOriginally Posted By dray85: Originally Posted By tater22: https://www.AR15.Com/media/mediaFiles/118189/D1530E09-FEDE-4433-962B-86B249811537_jpe-1618737.JPG Did you convert a SBA PDW to maxim CQB? The Maxim PDW and the SBA PDW are basically the same product and are compatible with a few various buffer tubes. I just swapped out a CQB tube and buffer. The mounting bracket and brace are the same SBA PDW product. |
|
|
|
|
Posted: 10/5/2020 4:02:05 PM EDT
[#31]
|
|
|
|
LA, USA
|
Posted: 10/5/2020 9:36:38 PM EDT
[#32]
That thing is sweet! What's the optic?
|
|
|
|
Posted: 10/5/2020 9:49:52 PM EDT
[#33]
Quote HistoryOriginally Posted By GrizzlyAlloy: That thing is sweet! What's the optic? Aimpoint Nano on a 39mm B&T mount |
|
|
|
|
Posted: 10/6/2020 12:45:42 PM EDT
[Last Edit: Ironhandjohn]
[#34]
...
|
|
|
|
ND, USA
|
Posted: 10/6/2020 4:57:41 PM EDT
[Last Edit: pewist]
[#35]
Originally Posted By doc_Zox: https://www.AR15.Com/media/mediaFiles/3097/80B20D43-3D24-45EC-ADE6-82216E10AFCC-1598166.jpg Cool. Is that a custom grip frame? Standard broomhandle walnut grips? |
|
|
|
Posted: 10/6/2020 4:59:12 PM EDT
[#36]
Quote HistoryOriginally Posted By pewist: Cool. Is that a custom grip frame? Standard broomhandle walnut grips? First post fail |
|
|
|
ND, USA
|
Posted: 10/6/2020 5:03:42 PM EDT
[#37]
Quote HistoryOriginally Posted By officerX: First post fail Guilty as charged. |
|
|
|
Posted: 10/6/2020 5:29:12 PM EDT
[#38]
Quote HistoryOriginally Posted By pewist: Guilty as charged. Well at least you got it fixed! |
|
|
|
CA, USA
|
Posted: 10/6/2020 9:06:52 PM EDT
[Last Edit: senorlechero]
[#39]
I got all the main pieces for my first pistol build. I had everything but the barrel and BCG on hand, traded for the BCG and got lucky with a BA gov profile 12.5”
Got the lower assembled no problem  Had to get a little creative for the upper since I don’t have any work benches yet since the recent move. We had to leave to deliver a cat before I could finish the upper, soon!  I don’t know what’s going on with the pictures, the preview of my post shows an embedded picture, hit submit and it’s a link. |
|
|
|
Posted: 10/6/2020 11:55:42 PM EDT
[Last Edit: Combat_Diver]
[#40]
ATF Rules the Honey Badger pistol is a SBR and violates NFA
 ATF Rules Honey Badger Pistol Is A SBR And Violates NFA - Are All AR-Pistols Next?!  Attached FileCD |
|
|
|
|
Posted: 10/7/2020 2:53:59 AM EDT
[#41]
 
|
|
|
|
FL, USA
|
Posted: 10/7/2020 6:28:19 AM EDT
[#42]
|
|
|
|
Posted: 10/7/2020 10:34:25 AM EDT
[Last Edit: Vehemence]
[#43]
Hey Senorlechero,
Where did you find the ‘pad’ inserted into the back of your KAK Blade brace. I need two of those, 1 black and one ODG. Thanks! |
|
|
|
|
Posted: 10/7/2020 10:47:56 AM EDT
[Last Edit: doc_Zox]
[#44]
Yes, Virginia, there is a broomhandleclaus
I bought that adaptor of a guy that built them for phantom paintball rigs while phantoms will use AR grips ARs will not mount Phantom grips I had to mod the interior interface to get it close to working, but it is 3/8th out on the top edge and not fully seated the grip scales are from a reinactor supply shop https://mantheline.com/product/c96-broomhandle-mauser-pistol-grips/ I contacted FutureForged about the idea Maybe if y'all emailed them, they might make this a product in their grip line https://futureforged.com/  |
|
|
|
|
Posted: 10/7/2020 11:45:37 AM EDT
[#45]
|
|
|
|
CA, USA
|
Posted: 10/7/2020 5:15:15 PM EDT
[Last Edit: senorlechero]
[#46]
Quote HistoryOriginally Posted By Vehemence: Hey Senorlechero, Where did you find the ‘pad’ inserted into the back of your KAK Blade brace. I need two of those, 1 black and one ODG. Thanks! I found them on Etsy, searched KAK shockwave plug and they popped up. Got her finished up today. And with a scope mounted, I’m saving my pennies and scrounging for a Vortex Viper PST 1-6 |
|
|
|
Posted: 10/7/2020 5:21:58 PM EDT
[Last Edit: officerX]
[#47]
Quote HistoryOriginally Posted By senorlechero: I found them on Etsy, searched KAK shockwave pad and they popped up. Got her finished up today. https://i.imgur.com/o8T5saj.jpg And with a scope mounted, I’m saving my pennies and scrounging for a Vortex Viper PST 1-6 https://i.imgur.com/hA7JIFJ.jpg You do you, I'm not the ATF, but I'm pretty sure that counts as altering the brace, making it illegal. Just saying. |
|
|
|
|
Posted: 10/7/2020 6:06:51 PM EDT
[#48]
Quote HistoryOriginally Posted By officerX: You do you, I'm not the ATF, but I'm pretty sure that counts as altering the brace, making it illegal. Just saying. Especially since the ATF letter on the Honey Badger, I'd remove the pad (and the photos). |
|
|
|
CA, USA
|
Posted: 10/8/2020 11:19:33 AM EDT
[#49]
Quote HistoryOriginally Posted By officerX: You do you, I'm not the ATF, but I'm pretty sure that counts as altering the brace, making it illegal. Just saying. Yeah, I went and re read what I could stand to, and while there’s no way to know for sure if you’re right or not, I don’t want to be a test case. I just wanted something to plug up the hole in the stock to keep debris out. Stupid, we shouldn’t have to deal with any of this. |
|
|
|
Posted: 10/8/2020 11:41:10 AM EDT
[#50]
Quote HistoryOriginally Posted By senorlechero: Yeah, I went and re read what I could stand to, and while there’s no way to know for sure if you’re right or not, I don’t want to be a test case. I just wanted something to plug up the hole in the stock to keep debris out. Stupid, we shouldn’t have to deal with any of this. You are 100% correct. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
