Quote History Quoted:
What barrels where you using before and what problems were you having? Going after the cheapest 6.5 barrel or any 6.5 in general if you are having problems isn't the best idea.
View Quote
Was a factory DPMS LR308A that ran like crap right out of the gate
with every type of ammo I tried including federal gold medal. DPMS
told me to keep shooting it and it was break in. The problem was that
it was destroying 1/3 of the ammo I was shooting because it was crashing
rounds into the back of the case that did not eject. so I started using
wolf ammo to lower the cost, then a case head blew off and lodged a
case in the chamber that I could not get out.
So I bought a Ranier arms Ultra match barrel and a JP bolt. Did the same
thing, over gassed. Adjustable gas block, heavy buffer/spring and it still either will not
lock the bolt back and half turn more gas causes an apparent over gas issue.
It sure looks like I got two bad barrels.
But started this thread wanting to know who sells/makes the best barrel for the buck in 6.5 CM