User Panel
User Panel
User Panel
|
Posted: 3/13/2015 2:25:22 PM EDT
[#1]
Very nice. Thank you. Did you have to wait on that barrel? I saw that one, but none in stock.
|
|
|
|
Posted: 3/14/2015 1:15:40 PM EDT
[#2]
Quote HistoryQuoted:
Very nice. Thank you. Did you have to wait on that barrel? I saw that one, but none in stock. I wanna say it took a few weeks. But I ordered a 20" barrel at the same time. Not sure if one or the other may have caused a longer turn around time. Email them to see what the wait time might be maybe. Good guys when I asked a ton of questions. |
|
|
|
Posted: 3/19/2015 8:22:13 PM EDT
[#3]
I don't have any pics yet, but will soon have an M5 FDE build started off (upper, lower, keymod rail). What are you guys doing for BCG's? Are the NiB Aero ones worth a damn or should I look into Rainier and WMD?
|
|
|
|
Posted: 3/19/2015 9:57:52 PM EDT
[#4]
16" Rainier Select Barrel M5 Upper/Lower Red Barn BCG SLR 14" Rail Blackhawk (Weaver) FFP 3-15 ...need to switch out the stock still. It is well balanced! 
|
|
|
|
Posted: 3/20/2015 10:47:43 AM EDT
[#5]
Quote HistoryQuoted:
16" Rainier Select Barrel M5 Upper/Lower Red Barn BCG SLR 14" Rail Blackhawk (Weaver) FFP 3-15 ...need to switch out the stock still. It is well balanced! http://i.imgur.com/YPz9aI0.jpg What does it weigh less optics and how does it shoot? Good looking rifle, just about what I have in mind to build up! |
|
|
|
Posted: 3/20/2015 2:48:52 PM EDT
[#6]
Quote HistoryQuoted: 16" Rainier Select Barrel M5 Upper/Lower Red Barn BCG SLR 14" Rail Blackhawk (Weaver) FFP 3-15 ...need to switch out the stock still. It is well balanced! http://i.imgur.com/YPz9aI0.jpg |
|
|
|
Posted: 3/22/2015 3:28:11 PM EDT
[#7]
I picked up the Aim NiB BCG. It looks amazing, better than their 5.56 NiB ones IMO in terms of machining finish. Yet to shoot it yet tho...
|
|
|
|
Posted: 3/23/2015 1:26:23 PM EDT
[#8]
Quote HistoryQuoted:
[snip] What does it weigh less optics and how does it shoot? Good looking rifle, just about what I have in mind to build up! *not to hijack the thread* Thanks! Weights is comparable to a KAC LPR - it shoots well. PPU 175 grain was averaging .75 inches at 100 yards, ADI 165 grain Sierras and the Hrndy 168 grain Zmaxs were right around 1.5 inches. Wind was staying around half-value and forgot my bag for the rear stock at home that day  Oh well, shooting is fun! 
|
|
|
|
Posted: 3/26/2015 11:32:45 PM EDT
[#9]
Nice pics fellas!
I'll post some new pics this weekend. My harris bipod is delivering tom. Got my odin works bipod mount delivered today. |
|
|
|
Posted: 3/27/2015 1:22:54 AM EDT
[#10]
Looking forward to more pics.
|
|
|
|
Posted: 3/30/2015 8:03:51 AM EDT
[#11]
How are these running? I'm kind of rough on guns and run the hard. I've hard Armalite, DPMS and CMMG; they failed to satisfy and didn't run so well. Anyway, are these reliable enough to get through a carbine course?
|
|
|
|
Posted: 3/30/2015 9:30:52 AM EDT
[#12]
Quote HistoryQuoted:
How are these running? I'm kind of rough on guns and run the hard. I've hard Armalite, DPMS and CMMG; they failed to satisfy and didn't run so well. Anyway, are these reliable enough to get through a carbine course? Is this directed more towards their complete guns or the builds featured here? As far as the builds featured here I think it is obviously going to weigh heavily on the components you use. The receivers seem to be of excellent quality themselves. I'm testing this one out later today after moving some parts around.   
|
|
|
|
Posted: 3/30/2015 10:54:02 AM EDT
[#13]
Quote HistoryQuoted:
Is this directed more towards their complete guns or the builds featured here? As far as the builds featured here I think it is obviously going to weigh heavily on the components you use. The receivers seem to be of excellent quality themselves. I'm testing this one out later today after moving some parts around. <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1876resized_zps5cddwva3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1876resized_zps5cddwva3.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1873resized_zpswe0b5z24.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1873resized_zpswe0b5z24.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1875resized_zps3syvghh3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1875resized_zps3syvghh3.jpg</a> Quote HistoryQuoted:
Quoted:
How are these running? I'm kind of rough on guns and run the hard. I've hard Armalite, DPMS and CMMG; they failed to satisfy and didn't run so well. Anyway, are these reliable enough to get through a carbine course? Is this directed more towards their complete guns or the builds featured here? As far as the builds featured here I think it is obviously going to weigh heavily on the components you use. The receivers seem to be of excellent quality themselves. I'm testing this one out later today after moving some parts around. <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1876resized_zps5cddwva3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1876resized_zps5cddwva3.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1873resized_zpswe0b5z24.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1873resized_zpswe0b5z24.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1875resized_zps3syvghh3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1875resized_zps3syvghh3.jpg</a> What length is that barrel? |
|
|
|
Posted: 3/30/2015 7:52:32 PM EDT
[#14]
Quote HistoryQuoted:
What length is that barrel? Quote HistoryQuoted:
Quoted:
Quoted:
How are these running? I'm kind of rough on guns and run the hard. I've hard Armalite, DPMS and CMMG; they failed to satisfy and didn't run so well. Anyway, are these reliable enough to get through a carbine course? Is this directed more towards their complete guns or the builds featured here? As far as the builds featured here I think it is obviously going to weigh heavily on the components you use. The receivers seem to be of excellent quality themselves. I'm testing this one out later today after moving some parts around. <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1876resized_zps5cddwva3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1876resized_zps5cddwva3.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1873resized_zpswe0b5z24.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1873resized_zpswe0b5z24.jpg</a> <a href="http://s863.photobucket.com/user/claypool27/media/IMG_1875resized_zps3syvghh3.jpg.html" target="_blank">http://i863.photobucket.com/albums/ab198/claypool27/IMG_1875resized_zps3syvghh3.jpg</a> What length is that barrel? 12.5". It is the CMMG barrel. |
|
|
|
Posted: 3/31/2015 8:56:11 PM EDT
[#15]
Just a heads up to those building with a M5 lower, you must use the Aero pivot and takedown pins. I tried using DPMS pins and the pivot pin did not clear both holes in the lower. The takedown pin had a smaller OD and was shorter, resulting in an excess amount of receiver slop. The Aero pins fit properly, and the receiver slop between a M5 upper and lower is nearly negligible.
|
|
|
|
Posted: 3/31/2015 9:15:32 PM EDT
[#16]
I bought a nice set off eBay that fit my lower perfectly
DPM Extended EZ Push (Enhanced Feature) TDP pins, detents, springs (2) 308 DPM also makes an extended mag release button. Not for everyone but it's an option. Quote HistoryQuoted:
Just a heads up to those building with a M5 lower, you must use the Aero pivot and takedown pins. I tried using DPMS pins and the pivot pin did not clear both holes in the lower. The takedown pin had a smaller OD and was shorter, resulting in an excess amount of receiver slop. The Aero pins fit properly, and the receiver slop between a M5 upper and lower is nearly negligible. |
|
|
|
Posted: 3/31/2015 9:18:37 PM EDT
[#17]
I did notice the play in the safety is more on my M5 than any of my ar15's, I believe the mag release is a little loose also
|
|
|
|
Posted: 3/31/2015 9:33:20 PM EDT
[#18]
Quote HistoryQuoted:
Just a heads up to those building with a M5 lower, you must use the Aero pivot and takedown pins. I tried using DPMS pins and the pivot pin did not clear both holes in the lower. The takedown pin had a smaller OD and was shorter, resulting in an excess amount of receiver slop. The Aero pins fit properly, and the receiver slop between a M5 upper and lower is nearly negligible. While this is true, it does not effect function at all. I have DPMS pins in mine and have had no issues |
|
|
|
Posted: 4/1/2015 9:32:01 AM EDT
[#19]
Quote HistoryQuoted: I just don't get it, maybe some people just don't need my money.... After visiting the above site and also trying to buy a gas block that came back outof-stock at checkout, I received an email from the guy saying he thinks he has one in stock just the same - will GBTM the next day. Days go by and I email him, call him, leave VM, throw a shoe his direction... nothing. Then I finally get a hold of him again, explain what I want and he says again he has one and will locate it and get back - he's got my email, phone but still nothing... and this is a local call. I think he must make these himself and must just busy on a muffler job Too bad, I really like that product - can't find it anywhere else for that price- not even his site. Quote HistoryQuoted: Quoted: Everyone is going to tell you to go buy a really rediculously expensive gas block, but if you are trying to save money the B.T.E. gas blocks are pretty damn nice. I have used 4 of these B.T.E. micro gas blocks on different builds and they work great. I personally like the stainless steel clamp on style and for $45 you cant beat the performance. I have the B.T.E. Micro Adjustable on my Aero M5 and it works great! B.T.E. Gas Block THANKS for that link - I have been looking for a lower cost clamp-on adj block and that one looks to be the ticket. I just don't get it, maybe some people just don't need my money.... After visiting the above site and also trying to buy a gas block that came back outof-stock at checkout, I received an email from the guy saying he thinks he has one in stock just the same - will GBTM the next day. Days go by and I email him, call him, leave VM, throw a shoe his direction... nothing. Then I finally get a hold of him again, explain what I want and he says again he has one and will locate it and get back - he's got my email, phone but still nothing... and this is a local call. I think he must make these himself and must just busy on a muffler job Too bad, I really like that product - can't find it anywhere else for that price- not even his site. |
|
|
|
Posted: 4/1/2015 9:44:57 AM EDT
[#20]
Quote HistoryQuoted: I did notice the play in the safety is more on my M5 than any of my ar15's, I believe the mag release is a little loose also My M5 lower doesn't have any play wiggle in the safety - you might try a different selector. The mag button is a little out from fully seated but it too is secure and doesn't wiggle. One other thing to be aware of is that some grips, such as various Ergo brand with 'wings' that wrap up next to the trigger guard won't fit due to their brilliant decision to put their cutsy logo there insteas of a little further up. |
|
|
|
Posted: 4/2/2015 1:40:53 AM EDT
[#21]
Does a Raptor charging handle fit these uppers?
|
|
|
|
Posted: 4/2/2015 7:57:48 AM EDT
[#22]
Quote HistoryQuoted:
Does a Raptor charging handle fit these uppers? Not sure, but the BCM Mod 4 works just fine on mine. Purchased from primary arms a couple of months ago. |
|
|
|
Posted: 4/2/2015 8:04:49 AM EDT
[#23]
Quote HistoryQuoted:
16" Rainier Select Barrel M5 Upper/Lower Red Barn BCG SLR 14" Rail Blackhawk (Weaver) FFP 3-15 ...need to switch out the stock still. It is well balanced! http://i.imgur.com/YPz9aI0.jpg Gorgeous rifle. |
|
|
|
Posted: 4/4/2015 4:11:16 PM EDT
[#24]
-Aero Precision M5 lower and M5E1 upper receiver with 15" rail, Nib-x BCG
-Magpul PRS stock -Battle Tested Equipment 3.5lb trigger -Impact Weapon Components keymod bipod mount -LaRue Tactical LT112 20moa mount -Ergogrip grip -Bushnell Elite Tactical 6-24x50 -6-9 swivel bipod -Bravo Company USA charging handle mod 4 (modified to fit) -Advanced Armament Corp. brakeout 51t Waiting on Rainier Ultramatch 20" barrel. 
|
|
|
|
Posted: 4/13/2015 7:04:09 PM EDT
[#25]
Almost there.... goal was to build an mil-inspired (M110/Mk11 Mod Oish) 20" 308 for general purpose at the range (usually 100m or less, might have access out to 600m) and will likely pop a deer or hog once completely.
Aero M5 receiver set Aero M5 BCG Aero M5 LPK Seekins Billet Mag Release RRA A2 stock/buffer tube DPMS 308 action spring and 308 buffer DPMS SPR plate Rainier 20" Rifle, 1/11, Select Barrel Knight's URX II rail Ergo Grip still need: gas block gas tube muzzle device send it off to have the rail shaved and installed by BoltCarrier will add a matech rear sight and nikon scope w/ burris pepr mount to finish off the sights once all put together has anyone run an adjustable gas block in combo with an SR25 URX rail? I'm curious to see how an adjustable looks but also holds up without being protected under the rail instead of a simple low pro. 
|
|
|
|
Posted: 4/14/2015 9:27:47 AM EDT
[#26]
Optic and mount came in. Time to shoot.
|
|
|
|
Posted: 4/14/2015 3:27:24 PM EDT
[#27]
Things haven't been going as quickly as I wanted on my build, but I did get some new goodies from Ares Armor for my M5. They have a short throw safety for $40 and an extended latch charging handle on sale for $36. For the money I couldn't be happier. The levers have some print on them I'm not overjoyed about but some sandpaper and some elbow grease will cure that. The charging handle works as well as any BCM I've used on my AR-15s. Some photos for reference.
I'd definitely recommend it to anyone on a budget. The levers on the safety are Poly, but it seems to function fine. Minimal play, same as the one that came with my LPK from Aero. Charging handle is excellent. Good fit, lever is nice, works well. ETA: also went with a K2 grip. |
|
|
|
Posted: 4/22/2015 12:43:49 AM EDT
[#28]
Has anyone tried one of the Midwest Industries rails on their M5 upper??? I'm thinking of going with the 15" MLOK version and wanted to see if there were any fitment issues and how it looks on the upper with a 16" barrel if possible. Thanks in advance.
|
|
|
|
Posted: 4/22/2015 8:34:01 AM EDT
[#29]
got one on order. hope its awesome
|
|
|
|
Posted: 4/22/2015 10:32:54 AM EDT
[#30]
Quote HistoryQuoted:
got one on order. hope its awesome Do post up some photos when you get it on the rifle. Any input on fitment issues as well, please. |
|
|
|
Posted: 4/23/2015 3:15:49 AM EDT
[#31]
 </a>" />
Waiting for my scope to get back from being coated then it's finally all done! In the mean time I'm running it with the Micro/Magnifier  " />
|
|
|
|
Posted: 4/23/2015 12:37:35 PM EDT
[#32]
Quote HistoryQuoted:
http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/80DF81EE-B5C9-41F7-B821-F20D9321669D_zpsnpuaynnb.jpg</a>" /> Waiting for my scope to get back from being coated then it's finally all done! In the mean time I'm running it with the Micro/Magnifier http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/B9F9079F-42C1-49D1-9AEF-8BBBDD2A5570_zpsefyllgqc.jpg</a>" />
FIFY |
|
|
|
Posted: 4/23/2015 6:25:08 PM EDT
[#33]
Quote HistoryQuoted:
Has anyone tried one of the Midwest Industries rails on their M5 upper??? I'm thinking of going with the 15" MLOK version and wanted to see if there were any fitment issues and how it looks on the upper with a 16" barrel if possible. Thanks in advance. No fitment issues, but it doesn't sit flush to the receiver. Look into the SLR handguards, similar design but sit flush. 15" keymod on 20" barrel Enlarged sizes 
|
|
|
|
Posted: 4/23/2015 11:28:51 PM EDT
[#34]
Quote HistoryQuote HistoryQuoted:
Quoted:
http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/80DF81EE-B5C9-41F7-B821-F20D9321669D_zpsnpuaynnb.jpg</a>" /> Waiting for my scope to get back from being coated then it's finally all done! In the mean time I'm running it with the Micro/Magnifier http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/B9F9079F-42C1-49D1-9AEF-8BBBDD2A5570_zpsefyllgqc.jpg</a>" /> http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/80DF81EE-B5C9-41F7-B821-F20D9321669D_zpsnpuaynnb.jpg http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/B9F9079F-42C1-49D1-9AEF-8BBBDD2A5570_zpsefyllgqc.jpg FIFY Thanks man! |
|
|
|
Posted: 4/24/2015 9:18:30 AM EDT
[#35]
Quote HistoryQuoted:
No fitment issues, but it doesn't sit flush to the receiver. Look into the SLR handguards, similar design but sit flush. 15" keymod on 20" barrel Enlarged sizes https://farm9.staticflickr.com/8690/16848219649_39272a011c_z.jpg Quote HistoryQuoted:
Quoted:
Has anyone tried one of the Midwest Industries rails on their M5 upper??? I'm thinking of going with the 15" MLOK version and wanted to see if there were any fitment issues and how it looks on the upper with a 16" barrel if possible. Thanks in advance. No fitment issues, but it doesn't sit flush to the receiver. Look into the SLR handguards, similar design but sit flush. 15" keymod on 20" barrel Enlarged sizes https://farm9.staticflickr.com/8690/16848219649_39272a011c_z.jpg Honestly as long as the top rail is continuous I don't care about the gap for the barrel nut. That looks pretty darn good to me. |
|
|
|
Posted: 4/24/2015 12:01:56 PM EDT
[#36]
Quote HistoryQuoted:
Honestly as long as the top rail is continuous I don't care about the gap for the barrel nut. That looks pretty darn good to me. Quote HistoryQuoted:
Quoted:
Quoted:
Has anyone tried one of the Midwest Industries rails on their M5 upper??? I'm thinking of going with the 15" MLOK version and wanted to see if there were any fitment issues and how it looks on the upper with a 16" barrel if possible. Thanks in advance. No fitment issues, but it doesn't sit flush to the receiver. Look into the SLR handguards, similar design but sit flush. 15" keymod on 20" barrel Enlarged sizes https://farm9.staticflickr.com/8690/16848219649_39272a011c_z.jpg Honestly as long as the top rail is continuous I don't care about the gap for the barrel nut. That looks pretty darn good to me. Look at the CMMG RKM-15 Rail...I have the 11" rail on the Multicam rifle above and absolutely love it! $165-175 depending on where you get it. |
|
|
|
Posted: 4/24/2015 11:41:13 PM EDT
[#37]
Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle.
|
|
|
|
Posted: 4/25/2015 12:47:41 AM EDT
[#38]
Quote HistoryQuoted:
Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle. The Raptor fits just fine. Some people had issues with the BCM charging handles early on. |
|
|
|
Posted: 4/25/2015 6:22:44 PM EDT
[#39]
Quote HistoryQuoted: The Raptor fits just fine. Some people had issues with the BCM charging handles early on. Quote HistoryQuoted: Quoted: Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle. The Raptor fits just fine. Some people had issues with the BCM charging handles early on. Perfect. Thanks for the reply. Yeah, I heard about the newer BCM handles rubbing on the receiver. BCM doesn't make an ambi handle is 7.62, so no worries there. |
|
|
|
Posted: 4/26/2015 10:42:36 AM EDT
[#40]
Quote HistoryQuoted:
Perfect. Thanks for the reply. Yeah, I heard about the newer BCM handles rubbing on the receiver. BCM doesn't make an ambi handle is 7.62, so no worries there. Quote HistoryQuoted:
Quoted:
Quoted:
Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle. The Raptor fits just fine. Some people had issues with the BCM charging handles early on. Perfect. Thanks for the reply. Yeah, I heard about the newer BCM handles rubbing on the receiver. BCM doesn't make an ambi handle is 7.62, so no worries there. FYI My BCM Mod 4 charging handle fits just fine. Ordered from Primary Arms |
|
|
|
Posted: 4/26/2015 11:49:07 AM EDT
[#41]
Quote HistoryQuoted:
FYI My BCM Mod 4 charging handle fits just fine. Ordered from Primary Arms Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle. The Raptor fits just fine. Some people had issues with the BCM charging handles early on. Perfect. Thanks for the reply. Yeah, I heard about the newer BCM handles rubbing on the receiver. BCM doesn't make an ambi handle is 7.62, so no worries there. FYI My BCM Mod 4 charging handle fits just fine. Ordered from Primary Arms +1 |
|
|
|
Posted: 4/26/2015 2:10:00 PM EDT
[#42]
Quote HistoryQuoted:
*not to hijack the thread* Thanks! Weights is comparable to a KAC LPR - it shoots well. PPU 175 grain was averaging .75 inches at 100 yards, ADI 165 grain Sierras and the Hrndy 168 grain Zmaxs were right around 1.5 inches. Wind was staying around half-value and forgot my bag for the rear stock at home that day Oh well, shooting is fun!
http://i.imgur.com/1O1a3sZ.jpg http://i.imgur.com/0YoXUS5.jpg http://i.imgur.com/VBORoUx.jpg Quote HistoryQuoted:
Quoted:
[snip] What does it weigh less optics and how does it shoot? Good looking rifle, just about what I have in mind to build up! *not to hijack the thread* Thanks! Weights is comparable to a KAC LPR - it shoots well. PPU 175 grain was averaging .75 inches at 100 yards, ADI 165 grain Sierras and the Hrndy 168 grain Zmaxs were right around 1.5 inches. Wind was staying around half-value and forgot my bag for the rear stock at home that day Oh well, shooting is fun!
http://i.imgur.com/1O1a3sZ.jpg http://i.imgur.com/0YoXUS5.jpg http://i.imgur.com/VBORoUx.jpg Great group! I also have the stainless select, but a 20". I've only taken it out twice so far and have only gotten 1.5-2" groups with 168's. I was a bit disappointed (especially with their sub MOA guarantee) but I still have to try 175's this weekend. Hopefully they will fly as good as yours. Did you measure any 5 shot groups with the 175's? |
|
|
|
Posted: 4/26/2015 3:14:19 PM EDT
[#43]
Quote HistoryQuoted:
http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/80DF81EE-B5C9-41F7-B821-F20D9321669D_zpsnpuaynnb.jpg</a>" /> Waiting for my scope to get back from being coated then it's finally all done! In the mean time I'm running it with the Micro/Magnifier http://<a href=http://i1016.photobucket.com/albums/af286/bradpuszczyk/Mobile%20Uploads/B9F9079F-42C1-49D1-9AEF-8BBBDD2A5570_zpsefyllgqc.jpg</a>" /> I'm digging the multicam. I may end up doing this to my eventual 7mm mag build on a savage action. Where are you getting this done at? |
|
|
|
Posted: 4/26/2015 3:16:50 PM EDT
[#44]
On the takedown/pivot pins....
I went up to Tacoma yesterday (SAA) and matched a M5 lower to my M5 upper. I think found a pin source other than Aero... https://www.primaryarms.com/KNS_Precision_308_Standard_Pivot_Pin_p/kns308pivotpin.htm https://www.primaryarms.com/KNS_Precision_308_Standard_Take_Down_Pin_p/kns308takedownpin.htm I knew that Aero was beginning to use pins made by KNS and saw these while I was ordering a PRS. I wasn't sure if these new Aero pins were a "special run" just for Aero, though. Testing the PA/KNS pins on my bare receivers, I'd say these must be the same pins Aero is shipping. Projection seems to be normal for both pins on both sides. No sunken heads, no difficulty pushing the pins out. Note that these are not fully assembled and under spring load, but I anticipate no issues with these pins. On the bolt catch.... Aero appears to be using a stock DPMS photo on the product page. I'm guessing that it's just a DPMS catch. I am going to try a garden-variety, DPMS LR308 bolt catch from another source. |
|
|
|
Posted: 4/26/2015 4:44:49 PM EDT
[#45]
Quote HistoryQuoted: FYI My BCM Mod 4 charging handle fits just fine. Ordered from Primary Arms Quote HistoryQuoted: Quoted: Quoted: Quoted: Does anybody know if the 7.62 Raptor charging handle will fit in the M5? I'm a southpaw, so I definitely need an ambi charging handle. The Raptor fits just fine. Some people had issues with the BCM charging handles early on. Perfect. Thanks for the reply. Yeah, I heard about the newer BCM handles rubbing on the receiver. BCM doesn't make an ambi handle is 7.62, so no worries there. FYI My BCM Mod 4 charging handle fits just fine. Ordered from Primary Arms That's good to hear. Perhaps BCM modified their handles slightly or went back to the older design to be compatible with the A5. |
|
|
|
Posted: 4/26/2015 5:49:24 PM EDT
[#46]
Mine hits, Maybe I got some old stock
|
|
|
|
Posted: 4/26/2015 8:28:52 PM EDT
[#47]
What bolt catch is everyone using?
I've tried Armalite (had to modify it to not hit carrier). Still didn't work right 100%. Wouldn't work on IMI Mags because it completely misses the follower on the mag. Ordered one from Aero and their bolt catch seems a tad short. The tab that sticks out that catches the follower on the mag seems a little short. It barely catches the follower on Magpul mags and IMI mags. |
|
|
|
Posted: 4/26/2015 8:38:34 PM EDT
[#48]
Quote HistoryQuoted:
Ordered one from Aero and their bolt catch seems a tad short. The tab that sticks out that catches the follower on the mag seems a little short. It barely catches the follower on Magpul mags and IMI mags. Well that sucks. I have a DPMS bolt catch en route. At least there is less drama with the set screw pivot pin if you have to change out a bolt catch on the large frame. |
|
|
|
Posted: 4/26/2015 9:50:22 PM EDT
[#49]
Quote HistoryQuoted:
Well that sucks. I have a DPMS bolt catch en route. At least there is less drama with the set screw pivot pin if you have to change out a bolt catch on the large frame. Quote HistoryQuoted:
Quoted:
Ordered one from Aero and their bolt catch seems a tad short. The tab that sticks out that catches the follower on the mag seems a little short. It barely catches the follower on Magpul mags and IMI mags. Well that sucks. I have a DPMS bolt catch en route. At least there is less drama with the set screw pivot pin if you have to change out a bolt catch on the large frame. Until you strip the allen screw like I did.  Found a place I think KAC armory that sells the set screws.
|
|
|
|
Posted: 4/27/2015 4:46:02 PM EDT
[#50]
I currently have a CMMG 308 parts kit bolt catch release that functions properly in my M5 Aero. My Aero factory bolt catch did not lock the bolt back, even though it appeared to have the required modification of the 45 degree angle on the outer corner that folks have had problems with.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
