User Panel
Quoted:
Thanks, guess I'll have to look elsewhere. View Quote View All Quotes View All Quotes Quoted:
Quoted:
here's a pic of my M5 with a BA 308 barrel with the M4 feed ramps. https://i837.photobucket.com/albums/zz300/rpol98/G%20and%20A/P1020295_zpsjjq2nh2y.jpg Thanks, guess I'll have to look elsewhere. It's super easy to match the Aero feed ramps to the barrel. This is my Rainier Select 18" barrel as I was in the middle of filing the upper to match. The right feed ramp (left in the pic) is the original Aero feed ramp. And after Took about five minuets per ramp to carefully work over with a Swiss file. Then a little polishing with a felt bob on a Dremel. It's hard to get a good pic with the iPhone. It should be noted that the rifle ran just fine with the feed ramps as they were but I wanted them to match up. As the rounds are loaded from the mag they don't touch the ramp in the upper receiver. |
|
|
Quoted:
Someone tried to convince me I ruined my gun when I posted this.... I just dremeled it out with a stone <a href="http://s140.photobucket.com/user/myphotoswin/media/20150404_185010_zpsjjypdhfx.jpg.html" target="_blank">http://i140.photobucket.com/albums/r31/myphotoswin/20150404_185010_zpsjjypdhfx.jpg</a> View Quote My hat is off to you for that. I thought about using a tapered stone bit on the Dremel but didn't have the guts to try. It took a while to work up the courage to try to sneak up on it with the half-round file. |
|
i was just wondering, if you remove the factory black hard-coat anodize, is the exposed bare aluminum softer than the provided factory surface treatment? and subject to getting pounded by bullet tips going up the ramp? just wondering.
at the same time, i know that this is a common modification. |
|
My rifle is done I have a few questions about Optics and sights. Do you have BUIS with a scope? I have ordered a Vortex viper scope that is on backorder, Since it is magnified would iron sights be worth it. I am looking at the cheap magpul and diamondhead BUIS.
|
|
Quoted:
Thanks, guess I'll have to look elsewhere. View Quote View All Quotes View All Quotes Quoted:
Quoted:
here's a pic of my M5 with a BA 308 barrel with the M4 feed ramps. https://i837.photobucket.com/albums/zz300/rpol98/G%20and%20A/P1020295_zpsjjq2nh2y.jpg Thanks, guess I'll have to look elsewhere. What's wrong in the pic? |
|
what's wrong in the pic? i guess poor photo lighting skills. but the gun functions perfectly despite the poor photography skills. JK.
i thought the upper receiver feed ramps mated very well with barrel extension feed ramps. no complaints there. |
|
Quoted:
Working on piecing together my M5. http://i43.photobucket.com/albums/e398/unclemoak/20160611_105041_1.jpg View Quote This is going to be awesome! Cant wait to see the finished product. |
|
Which hand guard?
Never mind just had to zoom in on my phone... |
|
Im looking to build another .308 and these look promising. How are the tolerances on these sets? I hate when a receiver set wiggles back and forth.
|
|
|
Quoted:
Almost done. http://i43.photobucket.com/albums/e398/unclemoak/Photo%20Jul%2014%204%2059%2023%20PM.jpg View Quote That looks awesome. What optic you going with? |
|
Quoted: That looks awesome. What optic you going with? View Quote View All Quotes View All Quotes Quoted: That looks awesome. What optic you going with? Gravitating toward the Nightforce NXS 2.5-10x42 |
|
is there a lot of slop that needs to be taken up? I have a seekins lower that has the set screw and it still has some wiggle on the front takedown pin with my aero upper.
|
|
|
Quoted: Working on piecing together my M5. http://i43.photobucket.com/albums/e398/unclemoak/20160611_105041_1.jpg View Quote Dude! That is HOT!!!! Whatever you do: Don't skimp out....spend every penny you can't afford.....and you will love it! LOL...eta>>>>>> I SHOULDA SCROLLED DOWN!!! AWESOME!!! You made me proud!!! That thing's GORGEUOS!!!! |
|
Quoted:
Almost done. http://i43.photobucket.com/albums/e398/unclemoak/Photo%20Jul%2014%204%2059%2023%20PM.jpg View Quote Specs on this one. Itching to build a 308 just like this. Looks great btw |
|
Quoted: Specs on this one. Itching to build a 308 just like this. Looks great btw View Quote View All Quotes View All Quotes Quoted: Specs on this one. Itching to build a 308 just like this. Looks great btw Aero M5 receiver set KAC URX 3.1 rail CMMG 16" barrel with a rifle length gas system SLR gas block Magpul MBUS Pros with the LR rear One of the Nitride and NiB BCG that I manufacture Geiselle SSA-E KAC MAMS break (probably switch to a Griffin taper mount) KAC 30mm scope mount Some standard Magpul furniture |
|
Quoted: Aero M5 receiver set KAC URX 3.1 rail CMMG 16" barrel with a rifle length gas system SLR gas block Magpul MBUS Pros with the LR rear One of the Nitride and NiB BCG that I manufacture Geiselle SSA-E KAC MAMS break (probably switch to a Griffin taper mount) KAC 30mm scope mount Some standard Magpul furniture View Quote Yummmmmmy!!!! Love the fact you make your own BCGs!!!!! |
|
Quoted:
Aero M5 receiver set KAC URX 3.1 rail CMMG 16" barrel with a rifle length gas system SLR gas block Magpul MBUS Pros with the LR rear One of the Nitride and NiB BCG that I manufacture Geiselle SSA-E KAC MAMS break (probably switch to a Griffin taper mount) KAC 30mm scope mount Some standard Magpul furniture View Quote View All Quotes View All Quotes Quoted:
Quoted:
Specs on this one. Itching to build a 308 just like this. Looks great btw Aero M5 receiver set KAC URX 3.1 rail CMMG 16" barrel with a rifle length gas system SLR gas block Magpul MBUS Pros with the LR rear One of the Nitride and NiB BCG that I manufacture Geiselle SSA-E KAC MAMS break (probably switch to a Griffin taper mount) KAC 30mm scope mount Some standard Magpul furniture Wait, what? Info please.... |
|
Anybody have any leads on in stock M5 upper recievers? I need two additional for these two barrels sitting on my shelf.
|
|
|
Quoted:
Anybody have any leads on in stock M5 upper recievers? I need two additional for these two barrels sitting on my shelf. View Quote Aero posted in industry section that they should have the new gen 2 M5 uppers available within the next two weeks. Receiver sets were said to be months out due to back orders for the lowers which comes first before putting any on site available as sets. |
|
these guys claim to have them in stock:
https://moriartiarmaments.com/.308-aero-precision-upper-receiver-anodized-black-.308-aero-precision-upper-receiver-anodized-black |
|
Finally started assembling my aero M5 upper, found that the ejection port door spring sticks out into the ejection port itself. Im using an aero parts kit.
Any thoughts? |
|
|
Mine was the same, I didn't like the way it snagged my finger so I clipped it with a wire cutter.
|
|
edit:
As of 4:30 EDT Sunday afternoon there are five M5 uppers in stock. As of 11:15 EDT Saturday night Aero has 21 M5 Upper Receivers in stock. http://aeroprecisionusa.com/m5-assembled-upper-receiver.html |
|
Are these receivers in high demand? I'm thinking of giving up my .308 project..
|
|
Quoted:
edit: As of 4:30 EDT Sunday afternoon there are five M5 uppers in stock. As of 11:15 EDT Saturday night Aero has 21 M5 Upper Receivers in stock. http://aeroprecisionusa.com/m5-assembled-upper-receiver.html View Quote Out of stock as of late morning today. |
|
Quoted:
Out of stock as of late morning today. View Quote View All Quotes View All Quotes Quoted:
Quoted:
edit: As of 4:30 EDT Sunday afternoon there are five M5 uppers in stock. As of 11:15 EDT Saturday night Aero has 21 M5 Upper Receivers in stock. http://aeroprecisionusa.com/m5-assembled-upper-receiver.html Out of stock as of late morning today. Guess that answered my question. Now I need a handguard, gas block, gas tube, muzzle device, and bcg, and glass, and a bazillion other things... |
|
What barrels are you guys using for your builds ? I have a Aero upper , lower and bolt carrier for a start now thinking about a 20" barrel. Do they accept any DPMS style barrel ?
Thanks Ed |
|
Quoted: What barrels are you guys using for your builds ? I have a Aero upper , lower and bolt carrier for a start now thinking about a 20" barrel. Do they accept any DPMS style barrel ? Thanks Ed View Quote Yes, any DPMS style barrel. I used a 16" CMMG with a rifle length gas system in mine. |
|
|
Was I a fucking idiot to pass on a M5 upper Enhanced with handguard, lower and NiB bcg for $500?
|
|
|
|
View Quote Great looking rifle! ETA: I asked about specs, but looked back a page and saw what I wanted to know |
|
Quoted: Such a good looking rifle! do you mind sharing your specs? I'm specifically interested in length of barrel, rail model and length. I like how the gas block just pokes out enough. So, model on that as well, please. View Quote View All Quotes View All Quotes Quoted: Such a good looking rifle! do you mind sharing your specs? I'm specifically interested in length of barrel, rail model and length. I like how the gas block just pokes out enough. So, model on that as well, please. Aero M5 receiver set KAC URX 3.1 rail CMMG 16" barrel with a rifle length gas system SLR gas block Magpul MBUS Pros with the LR rear One of the Nitride and NiB BCG that I manufacture Geiselle SSA-E KAC MAMS break (probably switch to a Griffin taper mount) KAC 30mm scope mount Nightforce NXS 3.5-15x50
Some standard Magpul furniture |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.