Site Notices
7/23/2014 4:06:00 PM
Author
Message
cantgrowup
Member
Offline
Posts: 966
Feedback: 0% (0)
Posted: 7/13/2012 10:13:59 PM
[Last Edit: 7/13/2012 10:23:45 PM by cantgrowup]
There are several major makers of the 300 Blackout in the AR platform. I know each will have its own champions, but is there any consensus among the owners on which are considered the best and which have known issues?
See gun... like gun.... buy gun... shoot gun... put in safe. Repeat as necessary.
SharpCharge
Member
Military
Offline
Posts: 3648
Feedback: 0% (0)
Link To This Post
Posted: 7/14/2012 12:28:15 AM
Tag for info.. I'm not sure if I want to just buy a complete upper of piecing one together. Headed to the gun show in the AM to pick up a stripped lower.
Whitebrad25
Online
Posts: 160
Feedback: 100% (108)
Link To This Post
Posted: 7/14/2012 2:06:27 AM
I want the info as well.


I have been looking at DDM4V5 300 Blackout upper and I'm sure it would be fantastic (I have a DDM4V5) but it is costly...
nhgunnut
Offline
Posts: 1164
Feedback: 100% (3)
Link To This Post
Posted: 7/15/2012 9:30:26 AM
By no means an expert here. I wanted a rifle with a primary purpose of running as quite as possible in my budget. I chose to build mine. Using a YHM upper and BCG initially I used a CMMG barrel with a carbine length gas system.. I had a few problems running subs with out the can. So I switched to a Grim Reaper Tactical with a pistol length gas system. With the can in place it is not much louder than my tac sol Ar22 with my Halo on it.
dryflash3
Global Warming Hoax Skeptic before it was cool
Offline
Posts: 19400
Feedback: 100% (1)
Link To This Post
Posted: 7/15/2012 9:46:54 AM
I priced uppers, one I liked was $769.

Ended up building my own for $540.

Shot it first time yesterday, ran fine.

Found out Lil' gun is the powder for me.

16" CMMG barrel.

All depends what you want, budget or big name $$ products.


I'm not going to shoot subs and I like the original stock.
Selling agent for Algores carbon credit scam.

Shooting and Reloading, one hobby feeds the other.


TALON1
Member
Offline
Posts: 42
Feedback: 0% (0)
Link To This Post
Posted: 7/15/2012 7:44:09 PM
I built my own using a PSA 16" carbine barrel, and Rainer Arms upper receiver. No problems!!

WholeBunches
Offline
Posts: 659
Feedback: 100% (10)
Link To This Post
Posted: 7/16/2012 3:21:02 PM
Originally Posted By Whitebrad25:
I want the info as well.


I have been looking at DDM4V5 300 Blackout upper and I'm sure it would be fantastic (I have a DDM4V5) but it is costly...


I own various 300 BLK rifles and uppers (a total of 5 at this time; another on order). My most accurate one is my DDM4V5 in 300 BLK. My 2nd best is my Delta Company Arms upper (but I think they are essentially out of business now). 3rd best is my Core15 upper. Note: even my "worst" still shoots fine for me. My "worst" took 2 deer, each with one shot last season. For this season I'm going to try my DDM4V5. In the case of the Daniel Defense, I bought the complete rifle. I did change out the trigger for a smoother, lighter pull.

A friend just put his upper together with a CMMG bbl. Initial shots fired yesterday show it should be nicely accurate. He did bore scope the bbl and commented how smooth the rifling looked. The only negative he found was that it wouldn't properly function his AR with light frangible bullet loads that function 100% in his Model 1 Sales upper. Jacketed bullet loads all functioned properly. We did not try subsonic loads in it, as he doesn't own nor intend to own a suppressor. The light frangible loads wouldn't function my DDM4V5 either. My subsonic 220gr loads function 100% in the DDM4V5 without a suppressor.

SixKiller
Offline
Posts: 1017
Feedback: 100% (31)
Link To This Post
Posted: 7/16/2012 4:50:54 PM
Any one heard of the uppers made by redline firearms?