User Panel
|
Quoted:
Welcome. Sounds like a slick rifle. You need to upload your images to a photo host like photobucket, flickr, tinypic, etc..... To post pictures copy and paste the IMG code. View Quote View All Quotes View All Quotes Quoted:
Welcome. Sounds like a slick rifle. You need to upload your images to a photo host like photobucket, flickr, tinypic, etc..... To post pictures copy and paste the IMG code. http://flic.kr/p/rpLJFJ Thanx for the help |
|
Quoted:
The 936 SLR Sentry will fit under their hands guards. And they have some 15, and i think a16" as well for the 308. Very nice stuff, and matches the MaTen very clean. View Quote View All Quotes View All Quotes Quoted:
The 936 SLR Sentry will fit under their hands guards. And they have some 15, and i think a16" as well for the 308. Very nice stuff, and matches the MaTen very clean. Quoted:
I think Lancers carbon fiber handguard will clear an SLR 9. Ill give these a look over, appreciate it... |
|
Quoted:
Quoted:
Welcome. Sounds like a slick rifle. You need to upload your images to a photo host like photobucket, flickr, tinypic, etc..... To post pictures copy and paste the IMG code. http://flic.kr/p/rpLJFJ Thanx for the help On Flickr go down to the "share" arrow (bottom right) and copy and paste the BB Code. Like this: Schuler Brake, best bang for you buck on the market... Pun intended!!!! by Shad Miller, on Flickr |
|
|
|
Atta boy
Now just choose a bigger size from the drop down above the BB Code link. Ex: MEGA MA-10 .308 by wareagle700, on Flickr |
|
Quoted: Atta boy Now just choose a bigger size from the drop down above the BB Code link. Ex: https://farm9.staticflickr.com/8634/15980436880_fe8789ba04_b.jpgMEGA MA-10 .308 by wareagle700, on Flickr View Quote |
|
Quoted:
Atta boy Now just choose a bigger size from the drop down above the BB Code link. Ex: <a href="https://flic.kr/p/qm8V8N" target="_blank">https://farm9.staticflickr.com/8634/15980436880_fe8789ba04_b.jpg</a>MEGA MA-10 .308 by wareagle700, on Flickr View Quote Mathecb, Do you have a weight on your rifle only...no optics or mag? Thanks |
|
|
Quoted:
I wish I had an 8lb rifle. Sorta. My next one will likely be a Grendel on a MEGA -15 set to save some weight. I'm at 14.5 with scope View Quote View All Quotes View All Quotes Quoted:
Quoted:
Right at 8lbs if I remember right. I wish I had an 8lb rifle. Sorta. My next one will likely be a Grendel on a MEGA -15 set to save some weight. I'm at 14.5 with scope That's about what these rifles wind up at. |
|
Quoted:
I figured I'd give it one last try at the range with a new buffer and spring. I also bought a box of FGMM 168's just to ensure it wasn't an error in handloading steps. http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/20150321_143439_zpspaoilwiv.jpg http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/20150321_143515_zpsajvsyup1.jpg The bolt would not close all the way (again after passing a GO and not closing on a NO-GO both from Forster) and after 20 minutes mortaring, the MEGA "super-awesome billet" charging handle is now bent (a few whacks with a hammer got it moving freely in the channel at least) and the bolt is completely stuck. Oh and the cleaning rod I attempted to use from the other end is also stuck. (that's also not a gouge on the bolt carrier in the second photo; it's just a piece of lint that i already blew off) $750 takes the whole fucking gun. View Quote Really? I would agree there's something extremely wrong with it, if it won't even chamber that ammo. I wish I could get my hands on it, and see what's up. |
|
Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point.
ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. |
|
Quoted: Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. View Quote You might do your blood pressure a favor and just chalk it up to bad luck, a bad combo, or maybe you did something wrong and just don't know it. None of those brands are shit, and to blame the world will only keep you angry. You could have parted it out a few days ago and probably gotten most of your money back. Your anger and frustration pretty much assures that you've got 10 pounds of scrap metal now. Good folks here could have helped you. Cut yourself some slack and take the lessons learned. -Stooxie |
|
Quoted:
you've got 10 pounds of scrap metal now. View Quote View All Quotes View All Quotes Howso? The receivers and handguard are shit because the BCG/round are stuck in the barrel? How does that turn the receivers into scrap metal? Good folks here could have helped you. I originally attempted to get help, and there was much lol'ing and responses that I should have just bought a larue. So if those are the "good people" who were trying to help, they can shove it up their ass. If you're speaking to the people who instantly said I had to have done something wrong, yeah. Totally helpful thing to say, especially while refusing to elaborate as to WHAT. But it must OBVIOUSLY be my fault if the rifle passes a GO gauge, doesn't pass a NO-GO gauge, but then still refuses to chamber factory "match" ammo alleged to be high quality. Cut yourself some slack and take the lessons learned. Oh, don't worry, I'm still taking the lessons learned. They just might not make a lot of folks happy for me to repeat them, so I won't. None of that is aimed at you or zia, merely responses to what you were saying. |
|
Firing pin is snapped and the cam pin has rotated. Anyone know how to get the cam pin rotated back when the BCG is completely frozen?
|
|
Quoted:
I had a rainier barrel ultra match that 2 bolts wouldn't close on. One being the AIM NiB. I was told by someone from Rainier Arms that I got the wrong barrel extension. Someone else told me to "just shoot it" after I told them the bolt wouldn't close. Umm, no... I ended up sending the barrel back and they called me saying I did get the correct barrel. I had to explain to them again that 2 different bolts didn't close on it. Their customer service is decent as i got my money back, but i will probably never order another barrel from them. I ended up going with a JP match barrel/bolt combo. I just finished building it a few days ago and function checks perfectly. http://i10.photobucket.com/albums/a143/druggiero/DSC_5379_zpsdpuv2ozd.jpg View Quote neat. did you miss the several times i stated this combination headspaced fine? i'm thinking you may have. the cam pin is rotated inside the receiver because the firing pin snapped somehow. |
|
Quoted: Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. View Quote |
|
Quoted:
Doesn't Aim's bcg have serrations on the side of it? Does that have anything to do with your issues. When I built my maten I used only the highest quality ingredients. Not saying Aims bcg is shit, but it def seems budget to me. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? |
|
I think you'll need to pull the barrel to get the BCG out at this point.
|
|
|
Quoted: what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? And dont PM me nasty shit when I did nothing to instigate you. |
|
Quoted: 1. I didn't PM you "nasty shit". 2. I merely informed you I was still awaiting an explanation on what about forward assist serrations makes a BCG not a "high quality ingredient". The insinuation with which your statement was extremely thick was that unless someone spends $500 on a JP BCG, they're using sub-standard parts. By that rationale, Paul Leitner-Wise uses sub-standard parts.....is that your assertion? If not, please explain what you meant, especially as it applies to forward-assist serrations causing the firing pin to break and allow the cam pin to rotate, causing the entire thing to bind up. 3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? And dont PM me nasty shit when I did nothing to instigate you. 1. I didn't PM you "nasty shit". 2. I merely informed you I was still awaiting an explanation on what about forward assist serrations makes a BCG not a "high quality ingredient". The insinuation with which your statement was extremely thick was that unless someone spends $500 on a JP BCG, they're using sub-standard parts. By that rationale, Paul Leitner-Wise uses sub-standard parts.....is that your assertion? If not, please explain what you meant, especially as it applies to forward-assist serrations causing the firing pin to break and allow the cam pin to rotate, causing the entire thing to bind up. 3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png |
|
....and still refuses to explain how FA serrations cause the issue at hand.
If you wanted to come and insult me that's fine, but at least be a man and admit it. Don't get all pissy when you're called out for it by claiming you were just trying to help. |
|
Quoted:
Why are you PM'ing me nasty shit? Me and the rest of the members are only truing to help. Instead you are taking your frustration out on people who you do not even know. For all I care you can take your shit build and shove it. Ill go back to the camp who says that you did something wrong because there seems to be no other explanation for your woes. And dont PM me nasty shit when I did nothing to instigate you. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? And dont PM me nasty shit when I did nothing to instigate you. Seriously man. Lay of the piss and wheaties diet and chill out. At this point you sound like this gun gave you your first period. ETA Can I get a ten digit for that location? |
|
Yeah sure, your only contribution is to make personal insults, so why wouldn't I go ahead and give that up to a guy who can't figure it out from a clear map?
|
|
Quoted:
1. I didn't PM you "nasty shit". 2. I merely informed you I was still awaiting an explanation on what about forward assist serrations makes a BCG not a "high quality ingredient". The insinuation with which your statement was extremely thick was that unless someone spends $500 on a JP BCG, they're using sub-standard parts. By that rationale, Paul Leitner-Wise uses sub-standard parts.....is that your assertion? If not, please explain what you meant, especially as it applies to forward-assist serrations causing the firing pin to break and allow the cam pin to rotate, causing the entire thing to bind up. 3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png View Quote my condolences for the loss of your boat. |
|
Don't have a boat. Tossed it off the bridge.
I'll take my leave now so as to not sully this thread with problems for people to make fun of right off the bat, then get sand in their cunts when I ask them to explain what their insults mean with regard to the actual issue at hand. |
|
Quoted: ....and still refuses to explain how FA serrations cause the issue at hand. If you wanted to come and insult me that's fine, but at least be a man and admit it. Don't get all pissy when you're called out for it by claiming you were just trying to help. View Quote View All Quotes View All Quotes Quoted: ....and still refuses to explain how FA serrations cause the issue at hand. If you wanted to come and insult me that's fine, but at least be a man and admit it. Don't get all pissy when you're called out for it by claiming you were just trying to help. Quoted:. Seriously man. Lay of the piss and wheaties diet and chill out. At this point you sound like this gun gave you your first period. Maybe he just needs a hug. |
|
Quoted:
Ok brother I was in the same boat so I will try to help you out if you haven't already bought some stuff. I hate the lancer rail. I spent way too much on it and then sold it almost right away. It is huge and carbon fiber the mounting options on it are very very weak. I went with an SLR option instead. I believe the SLR requires a SET version of the SLR9 and doesn't like the clamp. You can call doug at slr and find out if that is still true but Im pretty sure it is. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_8139.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_8139.jpg</a> mega with slr and kreiger 22 barrel on it. I think the lancer was an over priced pile of junk. Here is the same basic rifle when it was dressed with the lancer rail if they were pushing out the new full top rail versions I might feel different about it but the full carbon ones suck. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_7974.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_7974.jpg</a> View Quote Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. |
|
|
Mr. Ferret,
I think you got several lemon parts that just don't get along. I know these rifles can go together and run great and other than the AIM BCG I would trust all the components you chose. Do you still have the rifle? If so shoot me an IM, I had to do some troubleshooting when I first got mine together and ended up with a decent understanding of what to look for with certain problems. First thing I would do is exchange the BCG. I don't trust one unless I n ow where it came from. AIM is getting them cheap. |
|
Quoted:
1. I didn't PM you "nasty shit". 2. I merely informed you I was still awaiting an explanation on what about forward assist serrations makes a BCG not a "high quality ingredient". The insinuation with which your statement was extremely thick was that unless someone spends $500 on a JP BCG, they're using sub-standard parts. By that rationale, Paul Leitner-Wise uses sub-standard parts.....is that your assertion? If not, please explain what you meant, especially as it applies to forward-assist serrations causing the firing pin to break and allow the cam pin to rotate, causing the entire thing to bind up. 3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Yes, really. I'm so fucking done with this thing. Either AIM's BCG is total shit, Rainier's barrel is total shit (considering the pounding I gave the cleaning rod, it probably is now lol), and/or Mega's receivers are shit. I know their charging handle is complete shit, but that's beside the point. ETA: On second thought, everything but the barrel will be available for purchase. I'm getting ready to set that up in my chopsaw and cut it near the chamber end so i can get this fucking thing apart. what do serrations for a forward assist have to do with the cam pin rotating because the firing pin broke? and how do forward assist serrations equate to a BCG being shitty? And dont PM me nasty shit when I did nothing to instigate you. 1. I didn't PM you "nasty shit". 2. I merely informed you I was still awaiting an explanation on what about forward assist serrations makes a BCG not a "high quality ingredient". The insinuation with which your statement was extremely thick was that unless someone spends $500 on a JP BCG, they're using sub-standard parts. By that rationale, Paul Leitner-Wise uses sub-standard parts.....is that your assertion? If not, please explain what you meant, especially as it applies to forward-assist serrations causing the firing pin to break and allow the cam pin to rotate, causing the entire thing to bind up. 3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png I am going for a swim |
|
Quoted:
Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Ok brother I was in the same boat so I will try to help you out if you haven't already bought some stuff. I hate the lancer rail. I spent way too much on it and then sold it almost right away. It is huge and carbon fiber the mounting options on it are very very weak. I went with an SLR option instead. I believe the SLR requires a SET version of the SLR9 and doesn't like the clamp. You can call doug at slr and find out if that is still true but Im pretty sure it is. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_8139.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_8139.jpg</a> mega with slr and kreiger 22 barrel on it. I think the lancer was an over priced pile of junk. Here is the same basic rifle when it was dressed with the lancer rail if they were pushing out the new full top rail versions I might feel different about it but the full carbon ones suck. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_7974.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_7974.jpg</a> Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. Its cerakote and it is just the color the company I like mixes for magpul fde. I really like dealing with a top notch company for coating stuff like that because they have the mix down. When I changed out front ends out I called him and he told me to send the rail right on out and it color matched very nicely. If you aren't up on that coating even the stock colors right from nic will look slightly different if you don't mix the same way. This is a custom color he does and it matches great. |
|
Quoted:
3. It's a non-issue now; the entire assembly is underwater, IVO the red dot below: http://i154.photobucket.com/albums/s278/armed_ferret/gun_stuff/map_zpsec8vxhtp.png View Quote Pasadena! I went to CHS in the early 90s. |
|
Quoted:
Its cerakote and it is just the color the company I like mixes for magpul fde. I really like dealing with a top notch company for coating stuff like that because they have the mix down. When I changed out front ends out I called him and he told me to send the rail right on out and it color matched very nicely. If you aren't up on that coating even the stock colors right from nic will look slightly different if you don't mix the same way. This is a custom color he does and it matches great. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Ok brother I was in the same boat so I will try to help you out if you haven't already bought some stuff. I hate the lancer rail. I spent way too much on it and then sold it almost right away. It is huge and carbon fiber the mounting options on it are very very weak. I went with an SLR option instead. I believe the SLR requires a SET version of the SLR9 and doesn't like the clamp. You can call doug at slr and find out if that is still true but Im pretty sure it is. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_8139.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_8139.jpg</a> mega with slr and kreiger 22 barrel on it. I think the lancer was an over priced pile of junk. Here is the same basic rifle when it was dressed with the lancer rail if they were pushing out the new full top rail versions I might feel different about it but the full carbon ones suck. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_7974.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_7974.jpg</a> Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. Its cerakote and it is just the color the company I like mixes for magpul fde. I really like dealing with a top notch company for coating stuff like that because they have the mix down. When I changed out front ends out I called him and he told me to send the rail right on out and it color matched very nicely. If you aren't up on that coating even the stock colors right from nic will look slightly different if you don't mix the same way. This is a custom color he does and it matches great. Yeah they're standard Magpul FDE isn't. |
|
Quoted:
Yeah they're standard Magpul FDE isn't. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Ok brother I was in the same boat so I will try to help you out if you haven't already bought some stuff. I hate the lancer rail. I spent way too much on it and then sold it almost right away. It is huge and carbon fiber the mounting options on it are very very weak. I went with an SLR option instead. I believe the SLR requires a SET version of the SLR9 and doesn't like the clamp. You can call doug at slr and find out if that is still true but Im pretty sure it is. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_8139.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_8139.jpg</a> mega with slr and kreiger 22 barrel on it. I think the lancer was an over priced pile of junk. Here is the same basic rifle when it was dressed with the lancer rail if they were pushing out the new full top rail versions I might feel different about it but the full carbon ones suck. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_7974.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_7974.jpg</a> Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. Its cerakote and it is just the color the company I like mixes for magpul fde. I really like dealing with a top notch company for coating stuff like that because they have the mix down. When I changed out front ends out I called him and he told me to send the rail right on out and it color matched very nicely. If you aren't up on that coating even the stock colors right from nic will look slightly different if you don't mix the same way. This is a custom color he does and it matches great. Yeah they're standard Magpul FDE isn't. I know who his guy is (or at least I suspect I do, cause I've used him in the past too ) and he's right....dude knows his stuff. |
|
Quoted:
I know who his guy is (or at least I suspect I do, cause I've used him in the past too ) and he's right....dude knows his stuff. View Quote Im sure you are talking about the same guy I always use michael ware at CCA. My brother has a coating business so I know what the shitty ones look like and I know how amateurs try to pimp it as the same product at a cheaper cost while having inconsistencies in the color or thickness of spray. I have had zero issues with CCA for this so I am more than happy to hand my guns off. |
|
Quoted:
Im sure you are talking about the same guy I always use michael ware at CCA. My brother has a coating business so I know what the shitty ones look like and I know how amateurs try to pimp it as the same product at a cheaper cost while having inconsistencies in the color or thickness of spray. I have had zero issues with CCA for this so I am more than happy to hand my guns off. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I know who his guy is (or at least I suspect I do, cause I've used him in the past too ) and he's right....dude knows his stuff. Im sure you are talking about the same guy I always use michael ware at CCA. My brother has a coating business so I know what the shitty ones look like and I know how amateurs try to pimp it as the same product at a cheaper cost while having inconsistencies in the color or thickness of spray. I have had zero issues with CCA for this so I am more than happy to hand my guns off. Yup. They're quickly becoming one of the premier coaters in the midwest, if not the nation....for good reason. Michael's the friggin man. Plus he ain't askeered to get cold and wet to help Big R.... |
|
A Mega Maten is sitting in the water forming a reef while I'm sitting here, a broke ass student paying my way through college trying to save enough to build my own project gun.
Dammit! |
|
Quoted:
Yeah they're standard Magpul FDE isn't. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Ok brother I was in the same boat so I will try to help you out if you haven't already bought some stuff. I hate the lancer rail. I spent way too much on it and then sold it almost right away. It is huge and carbon fiber the mounting options on it are very very weak. I went with an SLR option instead. I believe the SLR requires a SET version of the SLR9 and doesn't like the clamp. You can call doug at slr and find out if that is still true but Im pretty sure it is. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_8139.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_8139.jpg</a> mega with slr and kreiger 22 barrel on it. I think the lancer was an over priced pile of junk. Here is the same basic rifle when it was dressed with the lancer rail if they were pushing out the new full top rail versions I might feel different about it but the full carbon ones suck. <a href="http://s273.photobucket.com/user/nickforney/media/IMG_7974.jpg.html" target="_blank">http://i273.photobucket.com/albums/jj228/nickforney/IMG_7974.jpg</a> Another strong 2nd vote for the SLR rail. I put a Solo on my 12.5" and it convinced me that I needed one for my 18" was well. Nick....What color/finish is your build. It looks badass brother. Its cerakote and it is just the color the company I like mixes for magpul fde. I really like dealing with a top notch company for coating stuff like that because they have the mix down. When I changed out front ends out I called him and he told me to send the rail right on out and it color matched very nicely. If you aren't up on that coating even the stock colors right from nic will look slightly different if you don't mix the same way. This is a custom color he does and it matches great. Yeah they're standard Magpul FDE isn't. Whos magpul FDE isn't? SLR? Im confused. |
|
|
Quoted:
I simply meant the nic industries color for FDE doesn't match well. I haven't gotten any colored items from SLR I am sure they put out great color jobs. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Whos magpul FDE isn't? SLR? Im confused. I simply meant the nic industries color for FDE doesn't match well. I haven't gotten any colored items from SLR I am sure they put out great color jobs. Oh I gotcha Thinking about getting the SLR 15" m-lok solo in FDE and am hoping it approximates it or at least gets close to the magpul furniture going on it. Now, if they would only get those rails back in stock When I started this build I thought it was gonna take a while due to money and the fact that 308 stuff is generally more expensive, but now I realize its going to take a while due to the fact that no one has what I want in stock when I am ready to order. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.