User Panel
Is this thread dead?
|
|
|
Originally Posted By cjwwd2:
Also, it's very clear. I have the rifle/rail in front of me and you don't. The rail is bent. View Quote A BENT rail would show a BEND in it. You are showing the end of the rail with a muzzle that doesn't appear to be exactly centered. That doesn't mean bent rail. If the rail is bent, show us a bent rail, not something that most of us look at as an improper installation or out of spec receiver. If you don't know how to show the rail is bent, the easiest way it to place it on a known good straight edge. For most people, that means grabbing the generic level out of their garage. The level doesn't have to be an upper end wood and brass model, a standard 3' aluminum one would work fine. A roofing square is another generic item lots of people have that would work as well. |
|
|
|
Originally Posted By MALICIOUS2551:
What length is this barrel and rail? Thank you. View Quote View All Quotes View All Quotes Originally Posted By MALICIOUS2551:
Originally Posted By weaponoutfitters:
Originally Posted By cjwwd2:
Originally Posted By Stickman:
Centurion Arms is NOT getting rid of their standard system. Nice! The original system, as a whole, is definitely superior and very cost effective when accessories pricing is factored in. With Centurion in-housing some areas of production, they've lowered their prices across the board on their Gen 2 CMRs http://56.media.tumblr.com/8735dbcb2029cf857adaf337e38cb9e9/tumblr_o2o3a7gngP1qjtttio1_1280.jpg What length is this barrel and rail? Thank you. It's a 14.0" barrel with a rifle length CMR 12 (aka, 12.56") |
|
[email protected]
http://www.weaponoutfitters.com https://www.facebook.com/weaponoutfitters https://instagram.com/weaponoutfitters/ |
Originally Posted By MALICIOUS2551:
Are these new MLOKs coming with QD sockets? I've seen them with and without. Is Centurion Arms going to produce polymer mlok panels or accessory package? Thank you. View Quote View All Quotes View All Quotes Originally Posted By MALICIOUS2551:
Are these new MLOKs coming with QD sockets? I've seen them with and without. Is Centurion Arms going to produce polymer mlok panels or accessory package? Thank you. The M-LOK accessories from Magpul are hard to beat so last I heard a few weeks back was that CA wasn't going to be making their own M-LOK accessories for a bit. And yes, the M-LOk variants are coming with QD sockets machined in |
|
[email protected]
http://www.weaponoutfitters.com https://www.facebook.com/weaponoutfitters https://instagram.com/weaponoutfitters/ |
|
Originally Posted By weaponoutfitters:
The M-LOK accessories from Magpul are hard to beat so last I heard a few weeks back was that CA wasn't going to be making their own M-LOK accessories for a bit. And yes, the M-LOk variants are coming with QD sockets machined in http://www.weaponoutfitters.com/media/catalog/product/cache/1/image/580x365/9df78eab33525d08d6e5fb8d27136e95/c/m/cmr-13-5-m-lok_1.jpg View Quote View All Quotes View All Quotes Originally Posted By weaponoutfitters:
Originally Posted By MALICIOUS2551:
Are these new MLOKs coming with QD sockets? I've seen them with and without. Is Centurion Arms going to produce polymer mlok panels or accessory package? Thank you. The M-LOK accessories from Magpul are hard to beat so last I heard a few weeks back was that CA wasn't going to be making their own M-LOK accessories for a bit. And yes, the M-LOk variants are coming with QD sockets machined in http://www.weaponoutfitters.com/media/catalog/product/cache/1/image/580x365/9df78eab33525d08d6e5fb8d27136e95/c/m/cmr-13-5-m-lok_1.jpg Thank you. |
|
|
Originally Posted By Maack:
http://1.bp.blogspot.com/-XSOUCbGjoQw/U7QUlfDIN8I/AAAAAAAAA8Q/LyRKQ8fvZMU/s1600/14.5_3.jpg View Quote Looks sweet! |
|
|
|
|
Finally got my parts back and the screw stripped out trying to loosen it after seeing the handguard favored to the left.
I had her all ready. Sent An email to CA for help. Its still a bad ass handguard. |
|
|
What wrench is everyone using to install the new CMR barrel nuts?
|
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By The_Hammer:
What wrench is everyone using to install the new CMR barrel nuts? View Quote I emailed CA about it and they have one they are calling a prototype that they'll probably send you. Hopefully they just start including them with the rails like a lot of other manufacturers do |
|
|
Originally Posted By cjwwd2:
I emailed CA about it and they have one they are calling a prototype that they'll probably send you. Hopefully they just start including them with the rails like a lot of other manufacturers do View Quote View All Quotes View All Quotes Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
What wrench is everyone using to install the new CMR barrel nuts? I emailed CA about it and they have one they are calling a prototype that they'll probably send you. Hopefully they just start including them with the rails like a lot of other manufacturers do Thanks for the info. |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper?
Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg View Quote Is that a 10.5" barrel? It's hard to tell from that angle. |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Is that a 10.5" barrel? It's hard to tell from that angle. View Quote View All Quotes View All Quotes Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Sorry, but I believe that is a 14.5" barrel with 14" rail. |
|
|
Originally Posted By Stickman:
Sorry, but I believe that is a 14.5" barrel with 14" rail. View Quote View All Quotes View All Quotes Originally Posted By Stickman:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Sorry, but I believe that is a 14.5" barrel with 14" rail. Well I guess it would pretty much look like that but 4" shorter |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Is that a 10.5" barrel? It's hard to tell from that angle. View Quote View All Quotes View All Quotes Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel |
|
|
Originally Posted By cjwwd2:
Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg View Quote View All Quotes View All Quotes Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg Wow, how old is that Noveske lower? I haven't seen purple that bright in a long time! |
|
|
Originally Posted By Stickman:
Wow, how old is that Noveske lower? I haven't seen purple that bright in a long time! View Quote View All Quotes View All Quotes Originally Posted By Stickman:
Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg Wow, how old is that Noveske lower? I haven't seen purple that bright in a long time! Haha I'm not quite sure! I believe I purchased it about 3-4 years ago. It doesn't seem to look like that anymore when I take pictures of it. It was only like that under certain lighting in my living room. Most of the time it looks normal...same lower below And check out this purple-ish MUR on my Ares rifle |
|
|
Originally Posted By cjwwd2:
Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg View Quote View All Quotes View All Quotes Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg That looks really good! |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By The_Hammer:
That looks really good! View Quote View All Quotes View All Quotes Originally Posted By The_Hammer:
Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg That looks really good! It's by far my favorite upper. I've since traded the Aimpoint for an EXPS, added a DBAL-A3 and am using my AAC 556-SD for now. Can't wait till my Mini-4 can gets here, that will be perfect for that upper. With an adjustable gas block, it is the smoothest, softest-shooting upper I own. |
|
|
Originally Posted By cjwwd2:
It's by far my favorite upper. I've since traded the Aimpoint for an EXPS, added a DBAL-A3 and am using my AAC 556-SD for now. Can't wait till my Mini-4 can gets here, that will be perfect for that upper. With an adjustable gas block, it is the smoothest, softest-shooting upper I own. View Quote View All Quotes View All Quotes Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
Does anyone have some pictures of a 9.5" CMR with a 10.5 upper? Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Is that a 10.5" barrel? It's hard to tell from that angle. Closest I got is a 9.5" CMR with a 10.3" barrel http://i.imgur.com/5IvofaA.jpg http://i.imgur.com/4C1dJ8o.jpg That looks really good! It's by far my favorite upper. I've since traded the Aimpoint for an EXPS, added a DBAL-A3 and am using my AAC 556-SD for now. Can't wait till my Mini-4 can gets here, that will be perfect for that upper. With an adjustable gas block, it is the smoothest, softest-shooting upper I own. I didn't know an adjustable gas block would fit. Which one did you use? |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg View Quote Stick, This gun (different pic) is the background on my CPU. |
|
Retired Mil
NRA Instructor Certified Glock Armorer Why? Because I have a lot of hate in my heart........ |
|
Originally Posted By cjwwd2:
SLR Rifleworks Sentry 7 set screw View Quote View All Quotes View All Quotes Originally Posted By cjwwd2:
Originally Posted By The_Hammer:
I didn't know an adjustable gas block would fit. Which one did you use? SLR Rifleworks Sentry 7 set screw Thanks! |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Originally Posted By Infidel4life11:
Stick, This gun (different pic) is the background on my CPU. View Quote View All Quotes View All Quotes Originally Posted By Infidel4life11:
Originally Posted By Stickman:
http://65.media.tumblr.com/bf24b4c0fa40e476bd6a6dccee16f977/tumblr_occfesPaHT1rrcg2fo1_1280.jpg Stick, This gun (different pic) is the background on my CPU. I admit that I do really like that build. |
|
|
After installing the barrel nut and using an ATI Armors Wrench, as I was attempting to do my first Torque at 40Ft/Lbs.. The spanner/tab snapped on me =\ no worries Weaponoutfitters came thru for me with the Geissele barrel nut tool.. Lol
|
|
|
Is it safe to use thread locker when mounting CMR specific accessories?
|
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
Anyone know if a LaRue low pro GB will work under the mlok version? Have a LaRue barrel needing a rail and always liked the design of the CMR.
|
|
|
Hit up Centurion Arms on facebook and they will respond.
|
|
I expect a girl to get freaky. You know, get really enthusiastic about the opportunity to eat my ass. ----- posted by Fiver
|
will the cmr mlok fit over a ba hanson .750 gas block?
|
|
|
|
DISREGARD
|
|
|
Any pics of a CMR 13 (Keymod or MLOK) with a 14.5" barrel? I've been scouring the last pages cause I thought I've seen one but can't seem to find anything.
|
|
|
Came in here looking for more of Stick's FSB CMR pics....
|
|
|
|
|
Anyone ever find out what if any other gas blocks will fit under the CMR?
|
|
|
Has anyone tried a MicroMOA Govnah gas block underneath a CMR rail?
|
|
|
|
|
|
I have a 14" Gen 1 and the new 13" Mlok, are the barrel nuts the same? I don't wanna break down an upper to see lol. Only difference I see is how it's wrench points have changed...............Thanks
Oh and the Mlok is ridiculously slimmer even compared to the Gen 1 which I always thought was hella skinny........... |
|
|
Originally Posted By Stickman:
Currently I don't have a FSB barrel to put one on, though I do have a FSB CMR ready to go. View Quote View All Quotes View All Quotes Originally Posted By Stickman:
Originally Posted By PraesulPresul1:
Came in here looking for more of Stick's FSB CMR pics.... Currently I don't have a FSB barrel to put one on, though I do have a FSB CMR ready to go. I'll wait as I know eventually it'll find a home. Where ever you store all your stuff Stick something tells me if I ever went there I would never leave...... |
|
|
Originally Posted By GoRebels:
I have a 14" Gen 1 and the new 13" Mlok, are the barrel nuts the same? I don't wanna break down an upper to see lol. Only difference I see is how it's wrench points have changed...............Thanks Oh and the Mlok is ridiculously slimmer even compared to the Gen 1 which I always thought was hella skinny........... View Quote They are definitely different. Whether or not they are compatible I don't yet know. I did the same thing, put a 13" MLOK on an older gen 1/1.5 barrel nut. I've yet to fire it to confirm it does not move around. |
|
|
'I just finally installed my 14.5" BA Hansen barrel to my build and the pinned gas block fits great under the 14" CMR. Unfortunately it looks like I will not be able to use the Griffin M4SD comp and QD blast shield combo I wanted because not enough of the barrel's threads are exposed. Approximately 3/8 of the threads are outside of the CMR.
Anyone know if the Griffin taper mount version of the M4SD and taper mount shield might work? Thanks! Not sure how to post pics on this forum since they are just saved on my computer... |
|
|
I expect a girl to get freaky. You know, get really enthusiastic about the opportunity to eat my ass. ----- posted by Fiver
|
Place holder for pics
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.