User Panel
[#1]
I don’t think it will work without modification. If you look at the MARS catch I think it looks like it is tabbed for the Ambi bolt release.
|
|
|
[Last Edit: emtothedee]
[#3]
Originally Posted By hobbez84:
http://i.imgur.com/SxOKFDrh.jpg Ignore the OD stock, Tan Sopmod inbound any day now MARS-L lower, MLC Rifle length upper, 14.5 barrel with a pin/weld. Only changes made was the Magpul MOE+ grip, and LaRue MBT trigger. I really like the setup, and despite the heavy profile barrel, I think it's a touch heavier than my SCAR 16S SBR. The only change I'd really do is a barrel lightening job, and H2 buffer. I wonder if Marvin and dimple a barrel that's already pinned and welded... View Quote Marvin is at least at 12 week lead time. I ended up getting a refund on work I sent out. |
|
|
[#4]
and i know when he dimpled my barrel he took the gasblock off.
|
|
|
[#5]
Originally Posted By sevin8nin:
and i know when he dimpled my barrel he took the gasblock off. View Quote Perfect excuse to buy a 2nd barrel. Sadly as thin as the handguard is, I don't see a lot of room for an adjustable gas block. I could use one since I have a Sandman K in ATF purgatory, that will be dedicated to the LMT. |
|
Hobbes : "Do you think there's a God?
Calvin : "Well somebody's out to get me!" |
[#6]
Funny thing, with a Surefire M600DF, EXPS 3-0, and no mag, the LMT (as pictured above) weighs 8.2 lbs.
My SCAR 16S with a 10" barrel, same light, no mag, and Aimpoint T2 weights.....8.2 lbs. Of course, the SBR balances better since a lot of the weight is in the middle of the reciever. The LMT is def. front heavy, and now I'm really interested if I can bring the weight down to below 8 lbs by dropping the barrel weight. I should also mention this was done on a no frills digital scale so the measurements arent exactly super accurate. |
|
Hobbes : "Do you think there's a God?
Calvin : "Well somebody's out to get me!" |
[#7]
Originally Posted By hobbez84:
Bummer. I can deal with a wait, but I dont want to lose the p&w flash hider. Perfect excuse to buy a 2nd barrel. Sadly as thin as the handguard is, I don't see a lot of room for an adjustable gas block. I could use one since I have a Sandman K in ATF purgatory, that will be dedicated to the LMT. View Quote |
|
|
[#8]
Originally Posted By hiih8r:
10.5" MRP upper topped with an Elcan 1-4 and also sporting a L3 LWTS thermal clip on. Ignore the peasant lower, my MARS-L stripped lower, LMT internals, and SBA3 will be at my dealer any day now. https://i.imgur.com/2gLWkRh.jpg View Quote |
|
|
[#9]
Originally Posted By hobbez84:
http://i.imgur.com/SxOKFDrh.jpg Ignore the OD stock, Tan Sopmod inbound any day now MARS-L lower, MLC Rifle length upper, 14.5 barrel with a pin/weld. Only changes made was the Magpul MOE+ grip, and LaRue MBT trigger. I really like the setup, and despite the heavy profile barrel, I think it's a touch heavier than my SCAR 16S SBR. The only change I'd really do is a barrel lightening job, and H2 buffer. I wonder if Marvin and dimple a barrel that's already pinned and welded... View Quote Question, what mloc panels are those? have you ever put that set up on a scale? |
|
|
[Last Edit: hobbez84]
[#10]
Originally Posted By m4hk33: Very nice, Oddly enough that is damn close to the final configuration that i am going to put together the next time i am in country. Question, what mloc panels are those? have you ever put that set up on a scale? View Quote 1. The black g10 panels are the railscales panels. 2 XOS panels on the sides, and 1 XOS-H panel on the bottom, with a Karve handstop. They surround the sides and bottom with a paper thin gap between each other. Your support hand will not touch any part of the rail, which is great since my hand naturally falls aroumd the gas block. The tan inserts are just cut Magpul Type 1 covers. I just use them as an index point. Here's an instagram pic I posted not too long ago. 2. Weight with the 14.5 barrel, EXPS 3-0, surefire M600df + switch, and the temporary magpul SL stock is an unscientific 8.2 lbs. |
|
Hobbes : "Do you think there's a God?
Calvin : "Well somebody's out to get me!" |
[#11]
Originally Posted By hobbez84:
@m4hk33 1. The black g10 panels are the railscales panels. 2 XOS panels on the sides, and 1 XOS-H panel on the bottom, with a Karve handstop. They surround the sides and bottom with a paper thin gap between each other. Your support hand will not touch any part of the rail, which is great since my hand naturally falls aroumd the gas block. The tan inserts are just cut Magpul Type 1 covers. I just use them as an index point. Here's an instagram pic I posted not too long ago. 2. Weight with the 14.5 barrel, EXPS 3-0, surefire M600df + switch, and the temporary magpul SL stock is an unscientific 8.2 lbs. View Quote How do you like the newer Eotech's? I used them a few years back before all the drama, went Aimpoints for a while and have been considering picking one up. I like the one i had back in the day, |
|
|
[#12]
Originally Posted By hobbez84:
http://i.imgur.com/SxOKFDrh.jpg Ignore the OD stock, Tan Sopmod inbound any day now MARS-L lower, MLC Rifle length upper, 14.5 barrel with a pin/weld. Only changes made was the Magpul MOE+ grip, and LaRue MBT trigger. I really like the setup, and despite the heavy profile barrel, I think it's a touch heavier than my SCAR 16S SBR. The only change I'd really do is a barrel lightening job, and H2 buffer. I wonder if Marvin and dimple a barrel that's already pinned and welded... View Quote |
|
|
[Last Edit: hobbez84]
[#13]
Originally Posted By m4hk33:
How do you like the newer Eotech's? I used them a few years back before all the drama, went Aimpoints for a while and have been considering picking one up. I like the one i had back in the day, View Quote View All Quotes View All Quotes Originally Posted By m4hk33:
How do you like the newer Eotech's? I used them a few years back before all the drama, went Aimpoints for a while and have been considering picking one up. I like the one i had back in the day, Originally Posted By STXDobie:
Looking good! The Sopmod will certainly look better but it is a couple of ounces heavier than the SL-S. That weight overall isn't half bad considering the rifle length upper and the heavy 14.5" LMT barrel. Marvin takes time and you must be patient, the last work I sent to him had a 16-18 week turn around. If want to do it then I'd likely suggest picking up a second barrel to have sent in for the work so that you can continue to use the setup you currently have here. You can always dump that barrel on the EE when your dimpled barrel arrives. |
|
Hobbes : "Do you think there's a God?
Calvin : "Well somebody's out to get me!" |
[#14]
LMT should get with the times and offer lighter weight barrels.
Cheers |
|
Failure has far too many fathers. -MMB
|
[#15]
|
|
|
[#16]
Originally Posted By m4hk33:
The day one and a half became 2!!! You ask for miracles, Theo https://image.ibb.co/j1zrJR/20171117_182242.jpg View Quote I’m trying to determine if there would be a notable difference switching my lightweight 13.5 over. |
|
|
[#17]
I want to say 8oz. The slk was 2oz lighter, the mlk is like 6oz lighter than the slk.
I really like it. Completely changed the way the weapon handles. That combo takes almost 14oz off the front end of the rifle. I honestly prefer it over my SCAR. My railed chassis is getting built with my 6.5 barrel. The mlk will run the 13.5, and Mars lower. |
|
|
[#18]
Thanks. I think I’m going to do something similar with my MWS as well, especially now that I’ve picked up a new MARS-H lower.
|
|
|
[Last Edit: GreasyEasy]
[#19]
Originally Posted By hobbez84:
http://i.imgur.com/SxOKFDrh.jpg Ignore the OD stock, Tan Sopmod inbound any day now MARS-L lower, MLC Rifle length upper, 14.5 barrel with a pin/weld. Only changes made was the Magpul MOE+ grip, and LaRue MBT trigger. I really like the setup, and despite the heavy profile barrel, I think it's a touch heavier than my SCAR 16S SBR. The only change I'd really do is a barrel lightening job, and H2 buffer. I wonder if Marvin and dimple a barrel that's already pinned and welded... View Quote I've only bought IWS lowers since they came out, but now I think I finally can go all LMT with my rifles outside of KAC micros as I still prefer those over everything else on the market. As I've said for many years to folks in conversations about MRPs, I'll gladly pay the extra 1lb or so weight penalty in return for the world's most bombproof, modular, rigid AR platform to date. MRPs as whole are easily among the most accurate factory ARs produced, if not the most accurate out of the box model produced. One last thing people also heavily discount with regard to the MRP design is just how much they dissipate heat over traditional uppers, the added weight, and heavier profile barrels help contribute to this aspect heavily as well. |
|
|
[#20]
Originally Posted By GreasyEasy:
Damn that's one of sweetest rifles I've seen in a really long time. I'd rather have a SD-E and T-2 up top, but I won't be complaining if you decide to send me your rifle:) I've only bought IWS lowers since they came out, but now I think I finally can go all LMT with my rifles outside of KAC micros as I still prefer those over everything else on the market. As I've said for many years to folks in conversations about MRPs, I'll gladly pay the extra 1lb or so weight penalty in return for the world's most bombproof, modular, rigid AR platform to date. MRPs as whole are easily among the most accurate factory ARs produced, if not the most accurate out of the box model produced. One last thing people also heavily discount with regard to the MRP design is just how much they dissipate heat over traditional uppers, the added weight, and heavier profile barrels help contribute to this aspect heavily as well. View Quote View All Quotes View All Quotes Originally Posted By GreasyEasy:
Originally Posted By hobbez84:
http://i.imgur.com/SxOKFDrh.jpg Ignore the OD stock, Tan Sopmod inbound any day now MARS-L lower, MLC Rifle length upper, 14.5 barrel with a pin/weld. Only changes made was the Magpul MOE+ grip, and LaRue MBT trigger. I really like the setup, and despite the heavy profile barrel, I think it's a touch heavier than my SCAR 16S SBR. The only change I'd really do is a barrel lightening job, and H2 buffer. I wonder if Marvin and dimple a barrel that's already pinned and welded... I've only bought IWS lowers since they came out, but now I think I finally can go all LMT with my rifles outside of KAC micros as I still prefer those over everything else on the market. As I've said for many years to folks in conversations about MRPs, I'll gladly pay the extra 1lb or so weight penalty in return for the world's most bombproof, modular, rigid AR platform to date. MRPs as whole are easily among the most accurate factory ARs produced, if not the most accurate out of the box model produced. One last thing people also heavily discount with regard to the MRP design is just how much they dissipate heat over traditional uppers, the added weight, and heavier profile barrels help contribute to this aspect heavily as well. |
|
|
[Last Edit: STXDobie]
[#21]
Originally Posted By jtdam24: This guy gets it. I'd rather have Oprah Winfrey shit in my mouth from a hot air balloon than have lmt change their barrel profiles to something light weight. http://i.imgur.com/WXfZz5Y.jpg View Quote Sweet rifle BTW, love the grey, but it needs a MARs lower. |
|
|
[#22]
Originally Posted By STXDobie:
ROFL, I'm dying over here. Sweet rifle BTW, love the grey! View Quote View All Quotes View All Quotes Originally Posted By STXDobie:
Originally Posted By jtdam24: This guy gets it. I'd rather have Oprah Winfrey shit in my mouth from a hot air balloon than have lmt change their barrel profiles to something light weight. http://i.imgur.com/WXfZz5Y.jpg Sweet rifle BTW, love the grey! |
|
|
[Last Edit: hobbez84]
[#23]
|
|
Hobbes : "Do you think there's a God?
Calvin : "Well somebody's out to get me!" |
[#24]
Originally Posted By jtdam24: This guy gets it. I'd rather have Oprah Winfrey shit in my mouth from a hot air balloon than have lmt change their barrel profiles to something light weight. http://i.imgur.com/WXfZz5Y.jpg View Quote Cheers |
|
Failure has far too many fathers. -MMB
|
[Last Edit: buddyhoohaw]
[#26]
Originally Posted By STXDobie:
Well thanks to the help of a fellow Arfcomer here I have been able to bring my old LMT back to life and its former glory. I love the 11.5" barrel length for an SBR so I picked up a barrel a while back with the anticipation piecing back together the upper of this original MRP. I still haven't figured out what I am going to do about rail panels or a hand stop, I am not fully sold on the original KAC panels I picked out for it and how it looks, but it might look better with a hand stop and another rail panel on the bottom. I have a Surefire Scout that I need to slap on but I am still waiting for the SR07 tape switch to show up and I need an offset rail mount for that as well. I stole the AAC Mini4 off of my Scar SBR so we shall see how they do together. For now it'll make a great backup to my SR-15 11.5" and it might even find work as a loaner gun in a class or two. Any thoughts on rail panels and hand stops? https://i.imgur.com/UDw9e2Y.jpg https://i.imgur.com/izdAdKc.jpg With its brother of another mother, KAC SR-15 CBQ SBR 11.5". https://i.imgur.com/MLlX7Av.jpg View Quote Cheers |
|
Failure has far too many fathers. -MMB
|
[#27]
Originally Posted By buddyhoohaw: IMHO it's hard to beat the old school Surefire rail panels if you can find them, however they only come in black. LaRue index clips are also a good, low profile option for 1913 pic rails as they can easily accommodate most hand stops. http://i5.photobucket.com/albums/y198/buddyhoohaw/HK%20MR556A1/11dff829-b35e-4350-8bfd-d5e02337e9bd_zpss0dytakv.jpg http://i5.photobucket.com/albums/y198/buddyhoohaw/LMT/FullSizeRender135_zpsmrehogwp.jpg Cheers View Quote |
|
|
[#28]
Originally Posted By STXDobie: Thanks for the pointers. I love the old Surefire rail panels/ladders but I haven't seen those for sale or in stock anywhere in few a years now. I can't bring myself to spend money on or own anything with the LaRue name on it, good stuff but it's just a matter of principle. View Quote Cheers |
|
Failure has far too many fathers. -MMB
|
[#29]
Originally Posted By buddyhoohaw: No worries. I guess I’m uninformed about LaRue politics. I have a few tins of index clips from EAG swag bags and they are a nice alternative to bulky rail panels. That’s all. Cheers View Quote |
|
|
[#30]
Originally Posted By STXDobie:
Well thanks to the help of a fellow Arfcomer here I have been able to bring my old LMT back to life and its former glory. I love the 11.5" barrel length for an SBR so I picked up a barrel a while back with the anticipation piecing back together the upper of this original MRP. I still haven't figured out what I am going to do about rail panels or a hand stop, I am not fully sold on the original KAC panels I picked out for it and how it looks, but it might look better with a hand stop and another rail panel on the bottom. I have a Surefire Scout that I need to slap on but I am still waiting for the SR07 tape switch to show up and I need an offset rail mount for that as well. I stole the AAC Mini4 off of my Scar SBR so we shall see how they do together. For now it'll make a great backup to my SR-15 11.5" and it might even find work as a loaner gun in a class or two. Any thoughts on rail panels and hand stops? https://i.imgur.com/UDw9e2Y.jpg https://i.imgur.com/izdAdKc.jpg With its brother of another mother, KAC SR-15 CBQ SBR 11.5". https://i.imgur.com/MLlX7Av.jpg View Quote |
|
|
[Last Edit: GreasyEasy]
[#31]
Originally Posted By STXDobie: LOL, it's not a big deal, just a small "Texas" matter. I am going to look for some Surefire ladders though, it would be nice to come across a set. Maybe I'll give the KAC panels another go if I can pick up a KAC picatinny mount hand stop to go with them. View Quote Shoot me a PM if you use them, and I'll give you some tips Ive learned over the years using them. |
|
|
[Last Edit: GreasyEasy]
[#32]
Originally Posted By jtdam24: This guy gets it. I'd rather have Oprah Winfrey shit in my mouth from a hot air balloon than have lmt change their barrel profiles to something light weight. http://i.imgur.com/WXfZz5Y.jpg View Quote Clearly I share your tastes very closely, as I love stretch MRPs, and believe the OG MK1 rail is easily the most super precision of them all, and in time will be regarded as the most legendary. It's the MRP of rails in my book, and similarly they're isn't another rail in the world that comes close to it's intricacy, depth & difficulty of manufacturing, and ultimately it's level of durability or ability to withstand incredibly amounts of abuse. Remington RAUGs would be their only competitor, but still falls a bit short. Keep building beautiful rifles brother, as I always enjoy seeing your pics. |
|
|
[#34]
Originally Posted By STXDobie: Oh I am aware and I agree, they look great when done that way and they actually provide grip lol. I even have a few somewhere that I did years back (circa 2011/12). They have become more difficult to come by these days with the clone game and my set is an original Vero Beach complete kit so I'd rather find random pieces to stipple. I need to pick up the old school aluminum KAC hand stop as well, I have the hard to find Delrin/POM model for the URX 3/3.1 but it wont mount to a picatinny rail. Thinking something like this. https://i.imgur.com/Ec2Gg6U.jpg View Quote FYI, those URX3 KAC delrin handstops are readily available through NS Defense. Cheers |
|
Failure has far too many fathers. -MMB
|
[#35]
|
|
|
[#36]
Originally Posted By STXDobie: Damn, had no idea! I was under the impression that they stopped making/selling them. Of course someone like NSDefense would still have them lol. View Quote Cheers |
|
Failure has far too many fathers. -MMB
|
[#37]
Originally Posted By buddyhoohaw:
Sooo you're saying that if LMT offered LW profile barrels you wouldn't buy one? Why not? I never said that LMT should stop making their existing profile, just offer LW for those that prefer them. I did enjoy your analogy though and I always like your photos. Cheers View Quote View All Quotes View All Quotes Originally Posted By buddyhoohaw:
Originally Posted By jtdam24: This guy gets it. I'd rather have Oprah Winfrey shit in my mouth from a hot air balloon than have lmt change their barrel profiles to something light weight. http://i.imgur.com/WXfZz5Y.jpg Cheers I of course understand the desire for a lighter weight barrel, it's just not for me and maybe i was too over zealous in getting my point across. I always enjoy reading your posts and seeing your amazing pics, I hope you don't think that was in any way directed towards you sir. No disrespect intended. |
|
|
[#38]
Originally Posted By jtdam24:
Buddy, I of course understand the desire for a lighter weight barrel, it's just not for me and maybe i was too over zealous in getting my point across. I always enjoy reading your posts and seeing your amazing pics, I hope you don't think that was in any way directed towards you sir. No disrespect intended. View Quote Question for you though: are you planning on picking up an LMT suppressor? I haven’t seen much information regarding them. Cheers |
|
Failure has far too many fathers. -MMB
|
[Last Edit: GreasyEasy]
[#39]
We can definitely pick on Buddyhoohaw as much as we want considering the man's firearm collection is in rarified air with regards to the particular type of rifles, and kit he owns. His collection specifically displays immense thought, many times custom work, and ultimately uber quality in each firearm he owns that I've seen him post, and that still sticks out in a crowd around here that is full of amazing rifles and collections. That said, the guy really has some deep emotional issues with his 50 shades of FDE policy, and I think he's never seen a shade of FDE he didn't take a shine to
One thing MRPs often exhibit, and perhaps is done by default due to their incredible modularity, but nonetheless, MRPs often display highly specialized configurations done so by owners in order to create in many times a rifle that transcends the normal notion of what a typical 6920 style AR is. MRPs make world beating MK18 type configs, arguably the best Recce, and SPR platforms, and hopefully in time they will find a way to create a MRP that has a similar role, feel, and kiss approach as a factory 6920 or 6720, but they already have standard LMT ARs for that. So I guess I getting at the point that their might not be a real reason for LMT to try and cater to the LW rage with it's MRP/MWS lineup considering their standard models do that perfectly fine as is. Regardless, no MRP owner is bitching when they get the email about new lightweight MRP uppers with pencil profiled barrels. |
|
|
[Last Edit: buddyhoohaw]
[#40]
Originally Posted By GreasyEasy:
We can definitely pick on Buddyhoohaw as much as we want considering the man's firearm collection is in rarified air with regards to the particular type of rifles, and kit he owns. His collection specifically displays immense thought, many times custom work, and ultimately uber quality in each firearm he owns that I've seen him post, and that still sticks out in a crowd around here that is full of amazing rifles and collections. That said, the guy really has some deep emotional issues with his 50 shades of FDE policy, and I think he's never seen a shade of FDE he didn't take a shine to One thing MRPs often exhibit, and perhaps is done by default due to their incredible modularity, but nonetheless, MRPs often display highly specialized configurations done so by owners in order to create in many times a rifle that transcends the normal notion of what a typical 6920 style AR is. MRPs make world beating MK18 type configs, arguably the best Recce, and SPR platforms, and hopefully in time they will find a way to create a MRP that has a similar role, feel, and kiss approach as a factory 6920 or 6720, but they already have standard LMT ARs for that. So I guess I getting at the point that their might not be a real reason for LMT to try and cater to the LW rage with it's MRP/MWS lineup considering their standard models do that perfectly fine as is. Regardless, no MRP owner is bitching when they get the email about new lightweight MRP uppers with pencil profiled barrels. View Quote I have to say that my favorite product to emerge from the LMT shop in a while is the MARS-L lower. I was fortunate to score one of the early releases thanks to jboy and I promptly filed a Form 1 which has since cleared. It is mated to my original MRP CQB which is my dedicated 300 blackout rig and as a lefty I really dig it. A huge kudos to LMT for now offering both 556 and 762 MARS lowers in stripped configuration. It think it is a great idea that offers the individual customization opportunities which is akin to the modularity and versatility of the MRP system. Cheers |
|
Failure has far too many fathers. -MMB
|
[#41]
Originally Posted By buddyhoohaw:
Ha ha...absolutely no offense taken here, I thought it was funny. Question for you though: are you planning on picking up an LMT suppressor? I haven’t seen much information regarding them. Cheers View Quote View All Quotes View All Quotes Originally Posted By buddyhoohaw:
Originally Posted By jtdam24:
Buddy, I of course understand the desire for a lighter weight barrel, it's just not for me and maybe i was too over zealous in getting my point across. I always enjoy reading your posts and seeing your amazing pics, I hope you don't think that was in any way directed towards you sir. No disrespect intended. Question for you though: are you planning on picking up an LMT suppressor? I haven’t seen much information regarding them. Cheers You know how much I love LMT and I'm sure at some point I will be picking up their suppressors but first on my list is the VOX. That will definitely be my next can. If I spilled my guts and told you all the cool things LMT was going to bring to market over the years but didn't for one reason or another it'd be amazing. Check out the vox when you get a moment. Also my go to is the Rugged Surge. I have another cqb inbound thanks to emmtothedee |
|
|
[#42]
Originally Posted By jtdam24:
Buddy, You know how much I love LMT and I'm sure at some point I will be picking up their suppressors but first on my list is the VOX. That will definitely be my next can. If I spilled my guts and told you all the cool things LMT was going to bring to market over the years but didn't for one reason or another it'd be amazing. Check out the vox when you get a moment. Also my go to is the Rugged Surge. I have another cqb inbound thanks to emmtothedee View Quote |
|
|
[Last Edit: jtdam24]
[#43]
Originally Posted By emtothedee:
How many cqbs will that make in total now? View Quote View All Quotes View All Quotes Originally Posted By emtothedee:
Originally Posted By jtdam24:
Buddy, You know how much I love LMT and I'm sure at some point I will be picking up their suppressors but first on my list is the VOX. That will definitely be my next can. If I spilled my guts and told you all the cool things LMT was going to bring to market over the years but didn't for one reason or another it'd be amazing. Check out the vox when you get a moment. Also my go to is the Rugged Surge. I have another cqb inbound thanks to emmtothedee In all seriousness I'm not sure. I have at least 12 MRP uppers and of all 3 styles (railed, slick, mlok) the railed are still my favorite, although I think slick may be the beefiest. |
|
|
[#44]
Today I learned that I have to remove the thumb safety to get the LMT factory 2 stage trigger installed in a MARS lower. That's annoying.
|
|
|
[#45]
|
|
|
[#46]
LMT 2 stage trigger is surprisingly bad. Adding the LaRue MBT heavy spring to the trigger was a vast improvement.
Attached File |
|
|
[#47]
I am surprised the LMT triggers aren't satisfactory.
I've got two of them (bought in the Dark Age from WES @ MSTN) and both a really good. One is near the equal of my KAC 2-stage. |
|
|
[#48]
Originally Posted By edwin907:
I am surprised the LMT triggers aren't satisfactory. I've got two of them (bought in the Dark Age from WES @ MSTN) and both a really good. One is near the equal of my KAC 2-stage. View Quote |
|
|
[#49]
Originally Posted By jtdam24:
Buddy, You know how much I love LMT and I'm sure at some point I will be picking up their suppressors but first on my list is the VOX. That will definitely be my next can. If I spilled my guts and told you all the cool things LMT was going to bring to market over the years but didn't for one reason or another it'd be amazing. Check out the vox when you get a moment. Also my go to is the Rugged Surge. I have another cqb inbound thanks to emmtothedee View Quote Cheers |
|
Failure has far too many fathers. -MMB
|
[#50]
Looking to pick up my first MRP and wondering who has good deals for MRP MLOK rifles/uppers. Bummed that I missed out on the Sportsman's Outdoor Superstore 1500 dollar rifles. Can't find another deal that good anywhere.
Are 14.5" MLOK complete uppers sold anywhere? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.