User Panel
User Panel
User Panel
|
Posted: 3/22/2016 8:06:35 AM EDT
[#1]
Quote HistoryOriginally Posted By mxdgood84: Funny you mention that, I had the same discussion with a local dealer here over the weekend who said the same thing. You can see in my pics that I went with the standard birdcage and the KAC bipod stud. Still, a NT4 is on my short list of suppressors so I may use one on the SAM-R at some point but I'm leaving it as is for now. Quote HistoryOriginally Posted By mxdgood84: Originally Posted By schaz42: No need for shims, the SAM-R uses a standard A2 flashhider. The whole suppressed SAM-R thing really has to stop, it was never used in that capacity. Wikipedia is often incorrect, and is so in this regard. Same with the ARMS #17 mount for the bipod, it used a KAC Bipod Stud. Anyway, good luck with your build, William William Funny you mention that, I had the same discussion with a local dealer here over the weekend who said the same thing. You can see in my pics that I went with the standard birdcage and the KAC bipod stud. Still, a NT4 is on my short list of suppressors so I may use one on the SAM-R at some point but I'm leaving it as is for now.  Took quite a bit of hand filing to get mine to fit properly. |
|
|
|
|
Posted: 3/22/2016 8:49:29 AM EDT
[#2]
Quote HistoryOriginally Posted By secretwheelman:
He's talking about this one. http://cdn3.bigcommerce.com/s-xock0/products/1472/images/447/20288-2__47034.1404844566.1280.1280.jpg?c=2 Took quite a bit of hand filing to get mine to fit properly. Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By mxdgood84:
Originally Posted By schaz42:
No need for shims, the SAM-R uses a standard A2 flashhider. The whole suppressed SAM-R thing really has to stop, it was never used in that capacity. Wikipedia is often incorrect, and is so in this regard. Same with the ARMS #17 mount for the bipod, it used a KAC Bipod Stud. Anyway, good luck with your build, William William Funny you mention that, I had the same discussion with a local dealer here over the weekend who said the same thing. You can see in my pics that I went with the standard birdcage and the KAC bipod stud. Still, a NT4 is on my short list of suppressors so I may use one on the SAM-R at some point but I'm leaving it as is for now. http://cdn3.bigcommerce.com/s-xock0/products/1472/images/447/20288-2__47034.1404844566.1280.1280.jpg?c=2 Took quite a bit of hand filing to get mine to fit properly. Are there pictures with these being used instead of the adapter? Never really gave the difference between the two much thought I just don't remember seeing the low profile of the bipod on a stud nut before. |
|
|
|
|
Posted: 3/22/2016 9:05:26 AM EDT
[#3]
Quote HistoryOriginally Posted By mxdgood84: Are there pictures with these being used instead of the adapter? Never really gave the difference between the two much thought I just don't remember seeing the low profile of the bipod on a stud nut before. Quote HistoryOriginally Posted By mxdgood84: Originally Posted By secretwheelman: Originally Posted By mxdgood84: Originally Posted By schaz42: No need for shims, the SAM-R uses a standard A2 flashhider. The whole suppressed SAM-R thing really has to stop, it was never used in that capacity. Wikipedia is often incorrect, and is so in this regard. Same with the ARMS #17 mount for the bipod, it used a KAC Bipod Stud. Anyway, good luck with your build, William William Funny you mention that, I had the same discussion with a local dealer here over the weekend who said the same thing. You can see in my pics that I went with the standard birdcage and the KAC bipod stud. Still, a NT4 is on my short list of suppressors so I may use one on the SAM-R at some point but I'm leaving it as is for now. http://cdn3.bigcommerce.com/s-xock0/products/1472/images/447/20288-2__47034.1404844566.1280.1280.jpg?c=2 Took quite a bit of hand filing to get mine to fit properly. Are there pictures with these being used instead of the adapter? Never really gave the difference between the two much thought I just don't remember seeing the low profile of the bipod on a stud nut before. You'll have to zoom in on these, but all of the ones I've seen have the P/N:20288. The bipods are mounted too close to the rail to be using a P/N:98060.    |
|
|
|
|
Posted: 3/22/2016 9:17:26 AM EDT
[#4]
Quote HistoryOriginally Posted By secretwheelman:
You'll have to zoom in on these, but all of the ones I've seen have the P/N:20288. The bipods are mounted too close to the rail to be using a P/N:98060. http://cdn3.volusion.com/j4enh.r2en5/v/vspfiles/photos/BCM-URG-SAMR-11.jpg?1456827038 http://www.armymarket.cz/obrazky/detail/0365_03.jpg https://kashiyuko.files.wordpress.com/2011/09/sam-r001.jpg Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By mxdgood84:
Originally Posted By secretwheelman:
Originally Posted By mxdgood84:
Originally Posted By schaz42:
No need for shims, the SAM-R uses a standard A2 flashhider. The whole suppressed SAM-R thing really has to stop, it was never used in that capacity. Wikipedia is often incorrect, and is so in this regard. Same with the ARMS #17 mount for the bipod, it used a KAC Bipod Stud. Anyway, good luck with your build, William William Funny you mention that, I had the same discussion with a local dealer here over the weekend who said the same thing. You can see in my pics that I went with the standard birdcage and the KAC bipod stud. Still, a NT4 is on my short list of suppressors so I may use one on the SAM-R at some point but I'm leaving it as is for now. http://cdn3.bigcommerce.com/s-xock0/products/1472/images/447/20288-2__47034.1404844566.1280.1280.jpg?c=2 Took quite a bit of hand filing to get mine to fit properly. Are there pictures with these being used instead of the adapter? Never really gave the difference between the two much thought I just don't remember seeing the low profile of the bipod on a stud nut before. You'll have to zoom in on these, but all of the ones I've seen have the P/N:20288. The bipods are mounted too close to the rail to be using a P/N:98060. http://cdn3.volusion.com/j4enh.r2en5/v/vspfiles/photos/BCM-URG-SAMR-11.jpg?1456827038 http://www.armymarket.cz/obrazky/detail/0365_03.jpg https://kashiyuko.files.wordpress.com/2011/09/sam-r001.jpg Yeah you're right, looks too close to be the adapter. I do like the clean look, might have to make the switch. Did you have to fit the stud or the nut to get it to work? On another note it does look like most of the SDM-Rs pictured here had the arms 32. |
|
|
|
|
Posted: 3/22/2016 10:31:06 AM EDT
[#5]
Quote HistoryOriginally Posted By mxdgood84: Yeah you're right, looks too close to be the adapter. I do like the clean look, might have to make the switch. Did you have to fit the stud or the nut to get it to work? On another note it does look like most of the SDM-Rs pictured here had the arms 32. I'm used to Geissele SMR dogbones that will slide through on their own. |
|
|
|
FL, USA
|
Posted: 3/22/2016 2:10:52 PM EDT
[#6]
Quote HistoryOriginally Posted By secretwheelman:
The square nut that goes inside the FF RAS. Without removing some metal, there was no way it was going in. I'm used to Geissele SMR dogbones that will slide through on their own. Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By mxdgood84:
Yeah you're right, looks too close to be the adapter. I do like the clean look, might have to make the switch. Did you have to fit the stud or the nut to get it to work? On another note it does look like most of the SDM-Rs pictured here had the arms 32. I'm used to Geissele SMR dogbones that will slide through on their own. Yeak mine was an extremely tight fit, I clp'd it and used a drum stick (5A in case anyone wants to know) to push it into place. William |
|
|
|
Posted: 3/22/2016 8:47:18 PM EDT
[#7]
Quote HistoryOriginally Posted By schaz42: Yeak mine was an extremely tight fit, I clp'd it and used a drum stick (5A in case anyone wants to know) to push it into place. William Quote HistoryOriginally Posted By schaz42: Originally Posted By secretwheelman: Originally Posted By mxdgood84: Yeah you're right, looks too close to be the adapter. I do like the clean look, might have to make the switch. Did you have to fit the stud or the nut to get it to work? On another note it does look like most of the SDM-Rs pictured here had the arms 32. I'm used to Geissele SMR dogbones that will slide through on their own. Yeak mine was an extremely tight fit, I clp'd it and used a drum stick (5A in case anyone wants to know) to push it into place. William At least I don't have to worry about it falling out.  |
|
|
|
|
Posted: 3/23/2016 8:39:57 PM EDT
[#8]
Made a couple minor changes today. Pulled the tas-1 front sling mount from my mk12 mod1 in progress and thanks to Milspec, I have 100% more Colt A2 grip.
   |
|
|
|
|
Posted: 3/27/2016 11:54:19 AM EDT
[#9]
Just found this thread. I'm starting my SAM-R build. I've got the KAC fsgb, the lower,upper , a2 stock, FF RAS , everything except the barrel and charging handle I think. I've already contacted compass lake. They say 4-weeks on the barrel. My question is what scope are you using? Do the leupold 3-9 scopes ever come up in the EE?
|
|
|
|
|
Posted: 3/27/2016 2:16:33 PM EDT
[#10]
Quote HistoryOriginally Posted By Samson-Dogg:
Just found this thread. I'm starting my SAM-R build. I've got the KAC fsgb, the lower,upper , a2 stock, FF RAS , everything except the barrel and charging handle I think. I've already contacted compass lake. They say 4-weeks on the barrel. My question is what scope are you using? Do the leupold 3-9 scopes ever come up in the EE? If you don't want to wait, Fulton Armory can get you a Criterion or Krieger finished barrel in about a week, but I understand waiting for the CLE. The 3-9 show up every once in a while, but plenty of similar variants show up too. I found an illuminated mil-dot M3 and jumped on it. Pic for pic thread: although I'm not sure if this will go on a 2nd SAM-R or a Recce with a medium FF RAS or something I haven't considered yet... 
|
|
|
|
|
Posted: 3/27/2016 3:15:57 PM EDT
[#11]
I'm actually doing a SAM-R,SDM-R and a west coast SAM-R at the same time. I've got everything except the Sam-r barrel and Sam-r barrel from WOA. So I don't mind waiting. monday I'll order both.
|
|
|
|
|
Posted: 3/27/2016 3:31:44 PM EDT
[#12]
Quote HistoryOriginally Posted By Samson-Dogg:
I'm actually doing a SAM-R,SDM-R and a west coast SAM-R at the same time. I've got everything except the Sam-r barrel and Sam-r barrel from WOA. So I don't mind waiting. monday I'll order both. Ought to be quite the trio. Looking forward to seeing them |
|
|
|
|
Posted: 3/27/2016 3:40:56 PM EDT
[#13]
If someone here happens to decide to get rid of an extra KAC fsgb let me know. I'm sure I can make it worth your while. This clone addiction has gotten out of hand. I'm doing all my lowers on a mini mill and 80%'s so I can get the markings as close as possible. I'll have pics soon.
|
|
|
|
|
Posted: 3/31/2016 10:43:22 PM EDT
[#14]
Do arms 22 high rings come in stock in batches or are the discontinued completely? Trying to find out if I need to search for some or just be patient for another batch.
|
|
|
|
|
Posted: 3/31/2016 11:38:00 PM EDT
[#15]
|
|
|
|
|
Posted: 4/1/2016 12:02:52 AM EDT
[#16]
where can we get the Knights gas block ?
|
|
|
|
|
Posted: 4/1/2016 6:45:52 AM EDT
[#17]
Quote HistoryI contacted them. Their inventory is not live. They are out of stock. I don't mind waiting. I just wanted to know if they still make them or if they are discontinued so if I see a set I know if I should jump on them or if they will be back around. |
|
|
|
|
Posted: 4/1/2016 6:47:41 AM EDT
[#18]
Quote HistoryOriginally Posted By BSOG1:
where can we get the Knights gas block ? You'll have to find someone willing to sell one which is a long shot and then expect to pay in the 700.00 range. |
|
|
|
GA, USA
|
Posted: 4/1/2016 10:07:45 PM EDT
[#19]
Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is.
|
|
|
|
Posted: 4/1/2016 10:12:03 PM EDT
[#20]
Quote HistoryOriginally Posted By GaTacoma: Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg  |
|
|
|
|
Posted: 4/1/2016 11:08:56 PM EDT
[#21]
not worth it. does anyone make something similar ?
Quote HistoryOriginally Posted By Samson-Dogg:
You'll have to find someone willing to sell one which is a long shot and then expect to pay in the 700.00 range. Quote HistoryOriginally Posted By Samson-Dogg:
Originally Posted By BSOG1:
where can we get the Knights gas block ? You'll have to find someone willing to sell one which is a long shot and then expect to pay in the 700.00 range. |
|
|
|
WI, USA
|
Posted: 4/2/2016 12:27:58 AM EDT
[Last Edit: JJREA]
[#22]
Quote HistoryOriginally Posted By secretwheelman:
Made a couple minor changes today. Pulled the tas-1 front sling mount from my mk12 mod1 in progress and thanks to Milspec, I have 100% more Colt A2 grip. <a href="https://flic.kr/p/FbtcJW" target="_blank">https://farm2.staticflickr.com/1679/25716386430_6c149476c8_o.jpg</a> <a href="https://flic.kr/p/FD2HET" target="_blank">https://farm2.staticflickr.com/1641/26016959595_6c752a7017_o.jpg</a> <a href="https://flic.kr/p/FuD5JX" target="_blank">https://farm2.staticflickr.com/1468/25922010931_e96f90f721_o.jpg</a> Where is he? I haven't seen him posting lately. Super nice build!!!! |
|
|
|
Posted: 4/2/2016 1:23:08 AM EDT
[#23]
Quote HistoryOriginally Posted By JJREA: Where is he? I haven't seen him posting lately. Super nice build!!!! Quote HistoryOriginally Posted By JJREA: Originally Posted By secretwheelman: Made a couple minor changes today. Pulled the tas-1 front sling mount from my mk12 mod1 in progress and thanks to Milspec, I have 100% more Colt A2 grip. <a href="https://flic.kr/p/FbtcJW" target="_blank">https://farm2.staticflickr.com/1679/25716386430_6c149476c8_o.jpg</a> <a href="https://flic.kr/p/FD2HET" target="_blank">https://farm2.staticflickr.com/1641/26016959595_6c752a7017_o.jpg</a> <a href="https://flic.kr/p/FuD5JX" target="_blank">https://farm2.staticflickr.com/1468/25922010931_e96f90f721_o.jpg</a> Super nice build!!!! And I haven't heard from him in a while. Might need to send up a flare. Originally Posted By BSOG1: not worth it. does anyone make something similar ? Originally Posted By Samson-Dogg: Originally Posted By BSOG1: where can we get the Knights gas block ? You'll have to find someone willing to sell one which is a long shot and then expect to pay in the 700.00 range. is extreme. I paid $475 for NIB. Some pay a little less, some a little more. But expect around $500. For a SAM-R, you're gonna be close to $1K for just the barrel, FSGB, installation of the FSGB, gas tube and FH. |
|
|
|
OK, USA
|
Posted: 4/2/2016 9:22:12 AM EDT
[Last Edit: blkrmycs]
[#24]
Quote HistoryOriginally Posted By Samson-Dogg:
I contacted them. Their inventory is not live. They are out of stock. I don't mind waiting. I just wanted to know if they still make them or if they are discontinued so if I see a set I know if I should jump on them or if they will be back around. Quote HistoryOriginally Posted By Samson-Dogg:
I contacted them. Their inventory is not live. They are out of stock. I don't mind waiting. I just wanted to know if they still make them or if they are discontinued so if I see a set I know if I should jump on them or if they will be back around. |
|
|
|
Posted: 4/2/2016 11:12:58 AM EDT
[Last Edit: Samson-Dogg]
[#25]
Quote HistoryOriginally Posted By GaTacoma:
Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? |
|
|
|
FL, USA
|
Posted: 4/2/2016 11:33:04 AM EDT
[#26]
Quote HistoryOriginally Posted By Samson-Dogg:
What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Quote HistoryOriginally Posted By Samson-Dogg:
Originally Posted By GaTacoma:
Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William |
|
|
|
Posted: 4/2/2016 12:07:16 PM EDT
[#27]
Quote HistoryOriginally Posted By schaz42: Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William Quote HistoryOriginally Posted By schaz42: Originally Posted By Samson-Dogg: Originally Posted By GaTacoma: Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William Leupold can swap m3 to m2 or vice versa. |
|
|
|
|
Posted: 4/2/2016 12:22:04 PM EDT
[#28]
Quote HistoryOriginally Posted By secretwheelman:
M1's can only be swapped to m5's. Leupold can swap m3 to m2 or vice versa. Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By schaz42:
Originally Posted By Samson-Dogg:
Originally Posted By GaTacoma:
Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William Leupold can swap m3 to m2 or vice versa. Yes I got confused between mr/t and LR/t. So that scope I was looking at is out. That brings me back to the mark 4 2.5-8x36. T's-30a2. Those are readily available and correct for the SAM-R and mk12 no? |
|
|
|
|
Posted: 4/2/2016 3:32:43 PM EDT
[#29]
Quote HistoryOriginally Posted By Samson-Dogg: Yes I got confused between mr/t and LR/t. So that scope I was looking at is out. That brings me back to the mark 4 2.5-8x36. T's-30a2. Those are readily available and correct for the SAM-R and mk12 no? Quote HistoryOriginally Posted By Samson-Dogg: Originally Posted By secretwheelman: Originally Posted By schaz42: Originally Posted By Samson-Dogg: Originally Posted By GaTacoma: Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William Leupold can swap m3 to m2 or vice versa. Yes I got confused between mr/t and LR/t. So that scope I was looking at is out. That brings me back to the mark 4 2.5-8x36. T's-30a2. Those are readily available and correct for the SAM-R and mk12 no? |
|
|
|
TN, USA
|
Posted: 4/2/2016 3:50:46 PM EDT
[Last Edit: dogesco93]
[#30]
nice builds.
|
|
|
|
Posted: 4/2/2016 4:15:20 PM EDT
[#31]
Quote HistoryOriginally Posted By Samson-Dogg:
Yes I got confused between mr/t and LR/t. So that scope I was looking at is out. That brings me back to the mark 4 2.5-8x36. T's-30a2. Those are readily available and correct for the SAM-R and mk12 no? Quote HistoryOriginally Posted By Samson-Dogg:
Originally Posted By secretwheelman:
Originally Posted By schaz42:
Originally Posted By Samson-Dogg:
Originally Posted By GaTacoma:
Got the barrel from WOA today. Debating on having the barrel finished black like I've seen most SDM-R's or leaving it as is. http://s10.postimg.org/t10lt7yft/IMG_1863_70224.jpg What scope are you running on the SAM-R? Also would a mark 4 LR/T 3.5-10x40mm with m1 turrets and mildot reticle be a good SAM-R optic? Can you put M3 turrets on a mark 4 with M1's? Can you put a LR/T on a SAM-R? Of course, you can put whatever scope you want on it, is it correct me though? No, it uses the MR/T like the Mk12 does. Alao if yiu have a M1 turrets you cannot use M3 caps afaik. William Leupold can swap m3 to m2 or vice versa. Yes I got confused between mr/t and LR/t. So that scope I was looking at is out. That brings me back to the mark 4 2.5-8x36. T's-30a2. Those are readily available and correct for the SAM-R and mk12 no? There's this one ending on ebay tomorrow that's at 810 right now. I'm not sure how high you're willing to go and I know ebay is hit or miss but it's a legit optic from a reputable seller with free shipping. If I was buying glass right now I'd definitely make a run at it. http://www.ebay.com/itm/LEUPOLD-MARK-4-MR-T-2-5-8x36mm-M2-TS-30-A2-w-Illuminated-TMR-Reticle-112633-/172145919599?hash=item2814b2466f:g:wSEAAOSwGYVW9JU~ Pic thread: 
|
|
|
|
|
Posted: 4/2/2016 8:17:08 PM EDT
[#32]
There was a DD M4 on eBay. Went for $400.00.
|
|
|
|
GA, USA
|
Posted: 4/2/2016 8:52:49 PM EDT
[#33]
Quote HistoryOriginally Posted By Samson-Dogg:
There was a DD M4 on eBay. Went for $400.00. Yup saw that too. Was planning on bidding on it but damn that's high. |
|
|
|
Posted: 4/2/2016 9:14:06 PM EDT
[#34]
Quote HistoryOriginally Posted By GaTacoma:
Yup saw that too. Was planning on bidding on it but damn that's high. Quote HistoryOriginally Posted By GaTacoma:
Originally Posted By Samson-Dogg:
There was a DD M4 on eBay. Went for $400.00. Yup saw that too. Was planning on bidding on it but damn that's high. I wouldn't really know. That's the only one I've ever seen for sale but I havnt been looking long either. A FF RAS long sold for 500.00 in the EE the other day. I thought that was high. I paid 350.00 each for mine. |
|
|
|
GA, USA
|
Posted: 4/2/2016 9:22:56 PM EDT
[#35]
Quote HistoryOriginally Posted By Samson-Dogg:
I wouldn't really know. That's the only one I've ever seen for sale but I havnt been looking long either. A FF RAS long sold for 500.00 in the EE the other day. I thought that was high. I paid 350.00 each for mine. Quote HistoryOriginally Posted By Samson-Dogg:
Originally Posted By GaTacoma:
Originally Posted By Samson-Dogg:
There was a DD M4 on eBay. Went for $400.00. Yup saw that too. Was planning on bidding on it but damn that's high. I wouldn't really know. That's the only one I've ever seen for sale but I havnt been looking long either. A FF RAS long sold for 500.00 in the EE the other day. I thought that was high. I paid 350.00 each for mine. Last one on eBay went for 250.00 I believe but I don't think it was as nice cosmetically. |
|
|
OK, USA
|
Posted: 4/5/2016 12:57:31 AM EDT
[Last Edit: blkrmycs]
[#36]
Does anybody know if the rifle Travis Haley used at Najaf was a SDM-R with an A.R.M.S. sir rail or was it just a M-16A4 with the sir rail?http:// https://youtu.be/BDoX8UnQ4D0
|
|
|
|
Posted: 4/5/2016 11:21:36 AM EDT
[#37]
If I remember right it was a 20" bushmaster with an arms sir rail
|
|
|
|
MI, USA
|
Posted: 4/5/2016 12:22:28 PM EDT
[#38]
Quote HistoryOriginally Posted By blkrmycs:
Does anybody know if the rifle Travis Haley used at Najaf was a SDM-R with an A.R.M.S. sir rail or was it just a M-16A4 with the sir rail?http:// https://youtu.be/BDoX8UnQ4D0 I looked it up cause I was interested too Bushmaster rifle. 20" heavy profile, standard chrome lined 1/9 ARMS 59 SIR rail ARMS 22 med rings ARMS 40 buis leupold mk4 3x9x40 mil dot Harris bipod w/ arms 32 PAQ2 Source- Travis Haley himself.posted under user name SimplyDynamic on 11/26/2008. Found it in the archives via a google search |
|
|
|
Posted: 4/5/2016 2:16:09 PM EDT
[Last Edit: mech4matsnova]
[#39]
Quote HistoryOriginally Posted By MrMitch:
I looked it up cause I was interested too Bushmaster rifle. 20" heavy profile, standard chrome lined 1/9 ARMS 59 SIR rail ARMS 22 med rings ARMS 40 buis leupold mk4 3x9x40 mil dot Harris bipod w/ arms 32 PAQ2 Source- Travis Haley himself.posted under user name SimplyDynamic on 11/26/2008. Found it in the archives via a google search Quote HistoryOriginally Posted By MrMitch:
Originally Posted By blkrmycs:
Does anybody know if the rifle Travis Haley used at Najaf was a SDM-R with an A.R.M.S. sir rail or was it just a M-16A4 with the sir rail?http:// https://youtu.be/BDoX8UnQ4D0 I looked it up cause I was interested too Bushmaster rifle. 20" heavy profile, standard chrome lined 1/9 ARMS 59 SIR rail ARMS 22 med rings ARMS 40 buis leupold mk4 3x9x40 mil dot Harris bipod w/ arms 32 PAQ2 Source- Travis Haley himself.posted under user name SimplyDynamic on 11/26/2008. Found it in the archives via a google search For anyone looking to clone that rifle, Bushmaster has that exact bbl in their web store for $150, I just picked one up for my SAM-Rish build |
|
|
|
|
Posted: 4/5/2016 2:59:30 PM EDT
[#40]
Quote HistoryOriginally Posted By mech4matsnova: For anyone looking to clone that rifle, Bushmaster has that exact bbl in their web store for $150, I just picked one up for my SAM-Rish build Quote HistoryOriginally Posted By mech4matsnova: Originally Posted By MrMitch: Originally Posted By blkrmycs: Does anybody know if the rifle Travis Haley used at Najaf was a SDM-R with an A.R.M.S. sir rail or was it just a M-16A4 with the sir rail?http:// https://youtu.be/BDoX8UnQ4D0 I looked it up cause I was interested too Bushmaster rifle. 20" heavy profile, standard chrome lined 1/9 ARMS 59 SIR rail ARMS 22 med rings ARMS 40 buis leupold mk4 3x9x40 mil dot Harris bipod w/ arms 32 PAQ2 Source- Travis Haley himself.posted under user name SimplyDynamic on 11/26/2008. Found it in the archives via a google search For anyone looking to clone that rifle, Bushmaster has that exact bbl in their web store for $150, I just picked one up for my SAM-Rish build |
|
|
|
|
Posted: 4/5/2016 3:52:39 PM EDT
[#41]
Quote HistoryOriginally Posted By secretwheelman:
If that SIR rail wasn't so expensive, I would love to build one of those. Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By mech4matsnova:
Originally Posted By MrMitch:
Originally Posted By blkrmycs:
Does anybody know if the rifle Travis Haley used at Najaf was a SDM-R with an A.R.M.S. sir rail or was it just a M-16A4 with the sir rail?http:// https://youtu.be/BDoX8UnQ4D0 I looked it up cause I was interested too Bushmaster rifle. 20" heavy profile, standard chrome lined 1/9 ARMS 59 SIR rail ARMS 22 med rings ARMS 40 buis leupold mk4 3x9x40 mil dot Harris bipod w/ arms 32 PAQ2 Source- Travis Haley himself.posted under user name SimplyDynamic on 11/26/2008. Found it in the archives via a google search For anyone looking to clone that rifle, Bushmaster has that exact bbl in their web store for $150, I just picked one up for my SAM-Rish build I find that's the problem with cloning a lot of mil hardware; most of the base parts are available and reasonably priced, except one or two, and they cost twice what you have in the project if they're available at all(KAC front sight gas block). That's why I said I was working on a SAM-Rish clone, some of the real deal parts are made of unobtanium for guys like me with limited budgets. |
|
|
|
|
Posted: 4/5/2016 4:19:53 PM EDT
[#42]
Quote HistoryOriginally Posted By mech4matsnova: I find that's the problem with cloning a lot of mil hardware; most of the base parts are available and reasonably priced, except one or two, and they cost twice what you have in the project if they're available at all(KAC front sight gas block). That's why I said I was working on a SAM-Rish clone, some of the real deal parts are made of unobtanium for guys like me with limited budgets. Quote HistoryOriginally Posted By mech4matsnova: Originally Posted By secretwheelman: If that SIR rail wasn't so expensive, I would love to build one of those. I find that's the problem with cloning a lot of mil hardware; most of the base parts are available and reasonably priced, except one or two, and they cost twice what you have in the project if they're available at all(KAC front sight gas block). That's why I said I was working on a SAM-Rish clone, some of the real deal parts are made of unobtanium for guys like me with limited budgets. When the parts were available, I fo'd. |
|
|
|
|
Posted: 4/5/2016 4:34:22 PM EDT
[#43]
Quote HistoryOriginally Posted By secretwheelman:
I went all out for the SAM-R, as it's a rifle I've wanted from the first time I saw one. When the parts were available, I fo'd. Quote HistoryOriginally Posted By secretwheelman:
Originally Posted By mech4matsnova:
Originally Posted By secretwheelman:
If that SIR rail wasn't so expensive, I would love to build one of those. I find that's the problem with cloning a lot of mil hardware; most of the base parts are available and reasonably priced, except one or two, and they cost twice what you have in the project if they're available at all(KAC front sight gas block). That's why I said I was working on a SAM-Rish clone, some of the real deal parts are made of unobtanium for guys like me with limited budgets. When the parts were available, I fo'd. I'm late to the game, and parts are non existent, so I have to make do with similar type parts. |
|
|
|
|
Posted: 4/5/2016 8:54:27 PM EDT
[#44]
Quote HistoryOriginally Posted By mech4matsnova: I'm late to the game, and parts are non existent, so I have to make do with similar type parts. Quote HistoryOriginally Posted By mech4matsnova: Originally Posted By secretwheelman: Originally Posted By mech4matsnova: Originally Posted By secretwheelman: If that SIR rail wasn't so expensive, I would love to build one of those. I find that's the problem with cloning a lot of mil hardware; most of the base parts are available and reasonably priced, except one or two, and they cost twice what you have in the project if they're available at all(KAC front sight gas block). That's why I said I was working on a SAM-Rish clone, some of the real deal parts are made of unobtanium for guys like me with limited budgets. When the parts were available, I fo'd. I'm late to the game, and parts are non existent, so I have to make do with similar type parts. |
|
|
|
OK, USA
|
Posted: 4/5/2016 9:34:59 PM EDT
[#45]
thanks for the replies everyone.
|
|
|
|
Posted: 4/23/2016 10:19:28 AM EDT
[#46]
Bump
Most of my parts shipped yesterday. If all goes to plan, I'm 2-3 weeks away from completion of my near clone.
|
|
|
|
|
Posted: 4/23/2016 5:49:41 PM EDT
[#47]
Quote HistoryOriginally Posted By mech4matsnova:
Bump Most of my parts shipped yesterday. If all goes to plan, I'm 2-3 weeks away from completion of my near clone. What parts are you going with? What makes it "near" vs. clone? I'm seeking an alternative to the KAC FFS, I want to get the party started and thats my last decision. |
|
|
|
|
Posted: 4/23/2016 7:03:23 PM EDT
[Last Edit: mech4matsnova]
[#48]
Quote HistoryOriginally Posted By NukeThemTillTheyGlow:
What parts are you going with? What makes it "near" vs. clone? I'm seeking an alternative to the KAC FFS, I want to get the party started and thats my last decision. Quote HistoryOriginally Posted By NukeThemTillTheyGlow:
Originally Posted By mech4matsnova:
Bump Most of my parts shipped yesterday. If all goes to plan, I'm 2-3 weeks away from completion of my near clone. What parts are you going with? What makes it "near" vs. clone? I'm seeking an alternative to the KAC FFS, I want to get the party started and thats my last decision. I went with the AT3 tactical 12" FF due to its near identical appearance to the KAC rail at 1/2 the price, a Stag 1/9 20" HBAR, a YHM flip up gas block(due to the rarity and price of the original PRI gas blocks), a Surefire supressor brake, and my personal setup has a B5 Sopmod(gen 2) collapsible rather than the fixed stock(I have one for correctness, but prefer the B5 since this isn't a range toy it's a Piggy blaster that will get lugged through soybean fields and swamps. I'm calling it the SAM-R Mod. Charlie{Civilian}). I got the ARMS #22 rings and surplus AN/PVS 14 mount today, but again due to cost, I'll be using a Nikon P223 in 3-9x40 until I can afford the Leupold Mk4. It's going to look close, but it won't be exact those purists who know will be able to pick it apart. I'm on an extreme budget so I have to make due with what I have. It's starting to look like a SAM-R on a MK12 mod H lower. ETA: If I can scratch together some more money, I want to get on the "I can wait" list for a LaRue MBT. |
|
|
|
|
Posted: 4/23/2016 9:22:15 PM EDT
[#49]
Quote HistoryOriginally Posted By mech4matsnova: I went with the AT3 tactical 12" FF due to its near identical appearance to the KAC rail at 1/2 the price, a Stag 1/9 20" HBAR, a YHM flip up gas block(due to the rarity and price of the original PRI gas blocks), a Surefire supressor brake, and my personal setup has a B5 Sopmod(gen 2) collapsible rather than the fixed stock(I have one for correctness, but prefer the B5 since this isn't a range toy it's a Piggy blaster that will get lugged through soybean fields and swamps. I'm calling it the SAM-R Mod. Charlie{Civilian}). I got the ARMS #22 rings and surplus AN/PVS 14 mount today, but again due to cost, I'll be using a Nikon P223 in 3-9x40 until I can afford the Leupold Mk4. It's going to look close, but it won't be exact those purists who know will be able to pick it apart. I'm on an extreme budget so I have to make due with what I have. It's starting to look like a SAM-R on a MK12 mod H lower. ETA: If I can scratch together some more money, I want to get on the "I can wait" list for a LaRue MBT. |
|
|
|
GA, USA
|
Posted: 4/25/2016 12:28:05 AM EDT
[Last Edit: GaTacoma]
[#50]
Got the upper back from ADCO a few weeks ago and I finally got to test fire it today. Now I just need to decide on an optic.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
.jpg)
