User Panel
User Panel
User Panel
MD, USA
|
Posted: 11/12/2018 9:10:04 PM EDT
[#1]
aaaaand mil status just got approved at leupold.....shiiiiit.
|
|
|
|
Posted: 11/12/2018 10:12:43 PM EDT
[#2]
Quote HistoryOriginally Posted By ArmedFerret:
aaaaand mil status just got approved at leupold.....shiiiiit. 
Hmmm... |
|
|
|
AZ, USA
|
Posted: 11/13/2018 1:57:36 AM EDT
[#3]
what is the barrel length on this?
Quote HistoryOriginally Posted By TheManimal: Mocked this one up for @Eyekahn https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945800/medium/1541363277/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945794/medium/1541363047/enhance Need the Omega 9k to break out of jail. This one doesn't need anything though: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945510/medium/1541363040/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945542/medium/1541363041/enhance |
|
|
|
Posted: 11/13/2018 2:09:19 AM EDT
[#4]
I remember reading this thread when it was fairly short and it seemed like such a neat concept. Now I'm back years later with my own I built last year. Only a 14.5 but eventually Ill be making a 12.5/11.5 little brother.
 Attached File |
|
|
|
|
Posted: 11/13/2018 1:23:06 PM EDT
[#5]
Quote HistoryOriginally Posted By AZMAN42:
what is the barrel length on this? Quote HistoryOriginally Posted By AZMAN42:
what is the barrel length on this? Originally Posted By TheManimal: Mocked this one up for @Eyekahn https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945800/medium/1541363277/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945794/medium/1541363047/enhance Need the Omega 9k to break out of jail. This one doesn't need anything though: https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945510/medium/1541363040/enhance https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124195945542/medium/1541363041/enhance Bottom is a 10.5" 5.56 and This is a 12.5" 5.56 
|
|
|
|
|
Posted: 11/13/2018 4:44:32 PM EDT
[#6]
Quote HistoryOriginally Posted By TheManimal: Top is a 8.3" 300 blackout Bottom is a 10.5" 5.56 and This is a 12.5" 5.56 https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/021024940703/media/124219537259/large/1542129742/enhance 
KAC 11.5 Still need some better glass, hoping I can come up on something decent on Black Friday  Attached File |
|
|
|
KY, USA
|
Posted: 11/13/2018 11:01:55 PM EDT
[#7]
Quote HistoryOriginally Posted By ArmedFerret: How's the strike eagle in low light? |
|
|
|
Posted: 11/16/2018 6:07:38 PM EDT
[Last Edit: Smithy]
[#8]
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is.
Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCM QRP 10" B5 stock H2 buffet Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG 
|
|
|
|
USA
|
Posted: 11/16/2018 7:21:04 PM EDT
[#9]
Quote HistoryOriginally Posted By Smithy:
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is. Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCP QRP 10" Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG https://i.imgur.com/Is9hU0S.jpg https://i.imgur.com/aw4uB6W.jpg https://i.imgur.com/n7DCXNp.jpg https://i.imgur.com/vqqBLct.jpg https://i.imgur.com/3UXDqkj.jpg |
|
|
USA
|
Posted: 11/16/2018 8:24:33 PM EDT
[#10]
I'm sorry but lmt MRP's are the best recces/uppers/SPR's/guns /use of aluminum
|
|
|
|
Posted: 11/17/2018 9:25:26 AM EDT
[#11]
Quote HistoryOriginally Posted By jtdam24:
I'm sorry but lmt MRP's are the best recces/uppers/SPR's/guns /use of aluminum
http://i.imgur.com/m4DwpbV.jpg 
|
|
|
|
|
Posted: 11/17/2018 9:36:54 AM EDT
[#12]
Quote HistoryOriginally Posted By jtdam24:
Awesome setup and pics brother Quote HistoryOriginally Posted By jtdam24:
Originally Posted By Smithy:
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is. Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCP QRP 10" Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG https://i.imgur.com/Is9hU0S.jpg https://i.imgur.com/aw4uB6W.jpg https://i.imgur.com/n7DCXNp.jpg https://i.imgur.com/vqqBLct.jpg https://i.imgur.com/3UXDqkj.jpg |
|
|
|
|
Posted: 11/17/2018 10:06:27 AM EDT
[#13]
Quote HistoryOriginally Posted By TheManimal:
+1 Looks like the planning paid off. How do you like the BCM QRP? I thought it was a KAC at first glance. Quote HistoryOriginally Posted By TheManimal:
Originally Posted By jtdam24:
Originally Posted By Smithy:
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is. Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCP QRP 10" Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG https://i.imgur.com/Is9hU0S.jpg https://i.imgur.com/aw4uB6W.jpg https://i.imgur.com/n7DCXNp.jpg https://i.imgur.com/vqqBLct.jpg https://i.imgur.com/3UXDqkj.jpg I replaced the KAC panels with some lighter rubber panels that pop on and off without having to remove items from the rails. They are lighter and a little more low profile and more user friendly. |
|
|
|
USA
|
Posted: 11/17/2018 12:26:29 PM EDT
[#14]
Quote HistoryOriginally Posted By TheManimal:
I don’t doubt it. I love my LMT Defender. Your builds are in another league though Quote HistoryOriginally Posted By TheManimal:
Originally Posted By jtdam24:
I'm sorry but lmt MRP's are the best recces/uppers/SPR's/guns /use of aluminum
http://i.imgur.com/m4DwpbV.jpg |
|
|
|
Posted: 11/17/2018 12:28:02 PM EDT
[#15]
Quote HistoryOriginally Posted By jtdam24:
I'm sorry but lmt MRP's are the best recces/uppers/SPR's/guns /use of aluminum
http://i.imgur.com/m4DwpbV.jpg |
|
|
|
|
Posted: 11/17/2018 6:53:44 PM EDT
[#16]
Upper came in today from D. Wilson. URX 2 10.75 with 11.5 Noveske barrel. 762-SDN6 as a placeholder until the M4-2000 comes in. Now what optic?
 Attached File |
|
|
|
|
Posted: 11/17/2018 7:42:20 PM EDT
[#17]
Quote HistoryOriginally Posted By cdholmes:
Upper came in today from D. Wilson. URX 2 10.75 with 11.5 Noveske barrel. 762-SDN6 as a placeholder until the M4-2000 comes in. Now what optic? https://www.AR15.Com/media/mediaFiles/414212/DFDA2135-8A78-4C64-8FB4-FCEE7C002B58_jpeg-742374.JPG
What range is everyone sighting their LPVO at? 50? |
|
|
|
|
Posted: 11/17/2018 8:08:26 PM EDT
[#18]
Quote HistoryOriginally Posted By loudxpack:
What range is everyone sighting their LPVO at? 50? |
|
|
|
|
Posted: 11/17/2018 8:45:32 PM EDT
[#19]
Quote HistoryOriginally Posted By loudxpack:
What range is everyone sighting their LPVO at? 50? |
|
|
|
KY, USA
|
Posted: 11/17/2018 9:23:52 PM EDT
[#20]
My SE 1-8 is 200 to use the reticle
|
|
|
TX, USA
|
Posted: 11/17/2018 10:19:49 PM EDT
[#21]
Quote HistoryOriginally Posted By Smithy:
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is. Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCM QRP 10" B5 stock H2 buffet Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG https://i.imgur.com/Is9hU0S.jpg https://i.imgur.com/aw4uB6W.jpg https://i.imgur.com/n7DCXNp.jpg https://i.imgur.com/vqqBLct.jpg https://i.imgur.com/3UXDqkj.jpg |
|
|
TX, USA
|
Posted: 11/17/2018 10:21:12 PM EDT
[#22]
I like 50 on my stuff that doesn’t have a bdc.
|
|
|
MD, USA
|
Posted: 11/18/2018 10:16:20 AM EDT
[#23]
Quote HistoryOriginally Posted By loudxpack:
What range is everyone sighting their LPVO at? 50? 5.56 rigs 100 for generic, specific BDC calibrated stuff gets done at whatever the OEM recommends, and then verified. |
|
|
|
Posted: 11/18/2018 10:24:07 AM EDT
[#24]
100 it is, thanks all
Today should be a good day, going to sight this girl in |
|
|
|
MD, USA
|
Posted: 11/18/2018 10:49:20 AM EDT
[#25]
Quote HistoryOriginally Posted By loudxpack:
100 it is, thanks all Today should be a good day, going to sight this girl in |
|
|
TX, USA
|
Posted: 11/18/2018 11:48:23 AM EDT
[#26]
So I’m going to start my mini recce and i’ve Decided to also make it a Noveske fan boy gun. 12.5 crusader barrel gen3 billet receivers, Noveske mlok rail. 1-8 accupower. But I can’t decide on doing a surefire warcomp or surefire socom muzzle brake. It’s a for a fun gun, my go to guns have warcomp’s on them. My competition rifle and my 14.5 mini recce have socom brakes so I can’t decide. Also torn on the trigger either geissele ssa-e that I have two of or a geissele ssp. My buddy has one and I like it.
|
|
|
|
Posted: 11/18/2018 3:57:21 PM EDT
[#27]
Quote HistoryOriginally Posted By cdholmes:
Upper came in today from D. Wilson. URX 2 10.75 with 11.5 Noveske barrel. 762-SDN6 as a placeholder until the M4-2000 comes in. Now what optic? https://www.AR15.Com/media/mediaFiles/414212/DFDA2135-8A78-4C64-8FB4-FCEE7C002B58_jpeg-742374.JPG or p4xi if on a budget |
|
|
|
|
Posted: 11/18/2018 5:45:54 PM EDT
[#28]
Quote HistoryOriginally Posted By ArmedFerret: enjoy! post pics! 
 Attached File Attached File Attached File Attached File Attached File |
|
|
|
MD, USA
|
Posted: 11/18/2018 7:03:32 PM EDT
[#29]
Quote HistoryOriginally Posted By loudxpack: Had a really good day. Got her all sighted in @ 100 and was making very consistent shots @ 500 when prone with bipod. That 11.5” was putting in work and surprised me at that range!
https://www.AR15.Com/media/mediaFiles/472230/CFEC1640-88D4-41CA-83E0-5D8CACECEA98_jpeg-743418.JPG https://www.AR15.Com/media/mediaFiles/472230/362A8038-8FB7-4D14-89D0-4E0FEA8631AF_jpeg-743419.JPG https://www.AR15.Com/media/mediaFiles/472230/43ED742E-0D3F-4955-ADAE-CF04C86752F4_jpeg-743420.JPG https://www.AR15.Com/media/mediaFiles/472230/065E4DDE-90D3-492F-BBF7-81889D56F1B6_jpeg-743421.JPG https://www.AR15.Com/media/mediaFiles/472230/8BCF9B77-2199-47A0-B8FD-CB1E1185C95E_jpeg-743422.JPG 
|
|
|
|
Posted: 11/18/2018 7:05:58 PM EDT
[Last Edit: Smithy]
[#30]
Quote HistoryOriginally Posted By TBone556:
Post some groups when you get a chance I want to see how accurate that crusader barrel is Quote HistoryOriginally Posted By TBone556:
Originally Posted By Smithy:
Great looking rifles in this thread. I finally got mine put together this morning. I have been sourcing parts for a while and changing my mind over and over again about the details of this build. Its been a long time coming but here she is. Spartan receiver set Noveske Crusader 12.5" Geisssele G2S Leupold MK4 1.5-5x Larue SPR mount BCM QRP 10" B5 stock H2 buffet Surefire M600 Bipod and Short vert grip were given to me years ago (not sure the brands) XS 45 degree sights Saker ASR FH Saker 5.56K Geisssele Super Charging Handle Nickel Teflon BCG https://i.imgur.com/Is9hU0S.jpg https://i.imgur.com/aw4uB6W.jpg https://i.imgur.com/n7DCXNp.jpg https://i.imgur.com/vqqBLct.jpg https://i.imgur.com/3UXDqkj.jpg As for groups let me preface this by saying the last time i did any precision shooting was last fall so to say I am rusty is an understatement. I am using the 4.5x Leupold which is not ideal for me at 100m when shooting groups to measure a barrels accuracy. The temp dropped to freezing today and I was running out of daylight. I was using the bipod on the ground so not exactly bench results. I was also using PPU 75 gr HP BT and Winchester 55 gr FMJ. The PPU is good but not exactly the best ammo out there. Enough with excuses, let’s get to the nitty gritty! I shot 3 round groups at 25 m to get on paper. I was impressed with a few of my groups here because they were almost all touching. I moved to 100 and dialed it in from there with 3 shot groups. I then shot a 10 shot group with PPU unsuppressed and a 5 shot suppressed. I then did the same with the Winchester 55 gr. Groups 10 shot PPU = 1.9” 5 shot PPU and CAN = 2.5” ( about 1” low and 1” left) 10 shot Winchester = 3” 5 shot Winchester and CAN = 3.3” (a little low and left) I am really not disappointed considering my conditions/ammo/equipment. I was really impressed with the Winchester. In the first 10 shot group of the PPU there was one small group of 4 that were almost touching, then the rest were sort of spread out around it. I think it’s due to the magnification and myself. Overall I am happy. I have no doubt this barrel can die better. I am off all week so I am going to due some groups later this week when the weather is better. I am also going to use a Leupold 3-9x. I will post results after round 2. |
|
|
|
MD, USA
|
Posted: 11/18/2018 7:21:34 PM EDT
[#31]
Quote HistoryOriginally Posted By Smithy: Zeroed today. As for groups let me preface this by saying the last time i did any precision shooting was last fall so to say I am rusty is an understatement. I am using the 4.5x Leupold which is not ideal for me at 100m when shooting groups to measure a barrels accuracy. The temp dropped to freezing today and I was running out of daylight. I was using the bipod on the ground so not exactly bench results. I was also using PPU 75 gr HP BT and Winchester 55 gr FMJ. The PPU is good but not exactly the best ammo out there. Enough with excuses, let’s get to the nitty gritty! I shot 3 round groups at 25 m to get on paper. I was impressed with a few of my groups here because they were almost all touching. I moved to 100 and dialed it in from there with 3 shot groups. I then shot a 10 shot group with PPU unsuppressed and a 5 shot suppressed. I then did the same with the Winchester 55 gr. Groups 10 shot PPU = 1.9” 5 shot PPU and CAN = 2.5” ( about 1” low and 1” left) 10 shot Winchester = 3” 5 shot Winchester and CAN = 3.3” (a little low and left) I am really not disappointed considering my conditions/ammo/equipment. I was really impressed with the Winchester. In the first 10 shot group of the PPU there was one small group of 4 that were almost touching, then the rest were sort of spread out around it. I think it’s due to the magnification and myself. Overall I am happy. I have no doubt this barrel can die better. I am off all week so I am going to due some groups later this week when the weather is better. I am also going to use a Leupold 3-9x. I will post results after round 2.
|
|
|
TX, USA
|
Posted: 11/19/2018 12:18:46 AM EDT
[#32]
Quote HistoryOriginally Posted By Smithy: Zeroed today. As for groups let me preface this by saying the last time i did any precision shooting was last fall so to say I am rusty is an understatement. I am using the 4.5x Leupold which is not ideal for me at 100m when shooting groups to measure a barrels accuracy. The temp dropped to freezing today and I was running out of daylight. I was using the bipod on the ground so not exactly bench results. I was also using PPU 75 gr HP BT and Winchester 55 gr FMJ. The PPU is good but not exactly the best ammo out there. Enough with excuses, let’s get to the nitty gritty! I shot 3 round groups at 25 m to get on paper. I was impressed with a few of my groups here because they were almost all touching. I moved to 100 and dialed it in from there with 3 shot groups. I then shot a 10 shot group with PPU unsuppressed and a 5 shot suppressed. I then did the same with the Winchester 55 gr. Groups 10 shot PPU = 1.9” 5 shot PPU and CAN = 2.5” ( about 1” low and 1” left) 10 shot Winchester = 3” 5 shot Winchester and CAN = 3.3” (a little low and left) I am really not disappointed considering my conditions/ammo/equipment. I was really impressed with the Winchester. In the first 10 shot group of the PPU there was one small group of 4 that were almost touching, then the rest were sort of spread out around it. I think it’s due to the magnification and myself. Overall I am happy. I have no doubt this barrel can die better. I am off all week so I am going to due some groups later this week when the weather is better. I am also going to use a Leupold 3-9x. I will post results after round 2. |
|
|
|
Posted: 11/19/2018 9:49:41 AM EDT
[#33]
Sit in the brush this morning. Didn’t see anything. Lots of tracks and signs around here just have to time it right.
 Attached File |
|
|
|
MN, USA
|
Posted: 11/19/2018 2:48:38 PM EDT
[#34]
Braved the cold and got a little range time in over the weekend.
Normally, the upper will be wearing a Steiner P4Xi. The HDMR was only on for accuracy testing but I kind of liked the way it looked. |
|
|
CO, USA
|
Posted: 11/20/2018 4:20:48 AM EDT
[Last Edit: Teufelshunde]
[#35]
Alright gents, Mini Recce build in progress and I need ur input for new midlength 13.5" upper config. Going on an lmt or a psa sbr lower. 6.5" f1 can or sdn6. P4xi in a lt204 mount.
I want rigid, quality and lightweight is nice.. Basic Aero Upper $70, Geissele MK14 mlok 13" rail $250........ $320 vs. Larue Stealth 2.0 upper and HG set... About $370 Planning to use a 14.7" CHF ml QPQ nitride cut to 13.5" by adco. https://midstatefirearms.com/147-Cold-Hammer-Forged-CHF-556-Nato-17-MidLength-Ar15-Barrel-147-chf-barrel.htm And who knows I just might talk myself into a Larue UU kit, but not sure yet.. Would sell off the lower accessories. |
|
|
MD, USA
|
Posted: 11/20/2018 7:00:33 AM EDT
[#36]
Quote HistoryOriginally Posted By Teufelshunde:
Alright gents, Mini Recce build in progress and I need ur input for new midlength 13.5" upper config. Going on an lmt or a psa sbr lower. 6.5" f1 can or sdn6. P4xi in a lt204 mount. I want rigid, quality and lightweight is nice.. Basic Aero Upper $70, Geissele MK14 mlok 13" rail $250........ $320 vs. Larue Stealth 2.0 upper and HG set... About $370 Planning to use a 14.7" CHF ml QPQ nitride cut to 13.5" by adco. https://midstatefirearms.com/147-Cold-Hammer-Forged-CHF-556-Nato-17-MidLength-Ar15-Barrel-147-chf-barrel.htm And who knows I just might talk myself into a Larue UU kit, but not sure yet.. Would sell off the lower accessories. |
|
|
CO, USA
|
Posted: 11/20/2018 7:39:43 AM EDT
[#37]
Quote HistoryOriginally Posted By ArmedFerret: Have you talked to Adco about this yet? Last I'd heard they didn't do work on nitride barrels as it killed tools really quickly. |
|
|
MD, USA
|
Posted: 11/20/2018 9:29:29 AM EDT
[#38]
Quote HistoryOriginally Posted By ArmedFerret: Have you talked to Adco about this yet? Last I'd heard they didn't do work on nitride barrels as it killed tools really quickly. If Adco won't work the QPQ tube you could go with that. |
|
|
|
Posted: 11/20/2018 11:32:48 AM EDT
[#39]
Quote HistoryOriginally Posted By Teufelshunde:
Alright gents, Mini Recce build in progress and I need ur input for new midlength 13.5" upper config. Going on an lmt or a psa sbr lower. 6.5" f1 can or sdn6. P4xi in a lt204 mount. I want rigid, quality and lightweight is nice.. Basic Aero Upper $70, Geissele MK14 mlok 13" rail $250........ $320 vs. Larue Stealth 2.0 upper and HG set... About $370 Planning to use a 14.7" CHF ml QPQ nitride cut to 13.5" by adco. https://midstatefirearms.com/147-Cold-Hammer-Forged-CHF-556-Nato-17-MidLength-Ar15-Barrel-147-chf-barrel.htm And who knows I just might talk myself into a Larue UU kit, but not sure yet.. Would sell off the lower accessories. 
|
|
|
|
CO, USA
|
Posted: 11/20/2018 11:36:25 AM EDT
[#40]
Quote HistoryOriginally Posted By ArmedFerret:
Rainier Arms still sells a 13.7" Rock Creek barrel. I have one on my pinned 13.7 I've posted in here before and it's fantastic. If Adco won't work the QPQ tube you could go with that. |
|
|
MD, USA
|
Posted: 11/20/2018 11:44:06 AM EDT
[#41]
Quote HistoryOriginally Posted By Teufelshunde: Adco say's they'll cut nitrided barrels. Gas port .08 and they are only $85 shipped. at the link above... So close to $200 after adco and shipping. But maybe should spend the $100 extra for a barrel with a real reputation.. Cant find much on the midstate barrels..but their cheap! |
|
|
MN, USA
|
Posted: 11/20/2018 12:55:30 PM EDT
[#42]
Quote HistoryOriginally Posted By ArmedFerret: that's a recipe for overgassed if ever I saw one. 14.5 carbine barrels tend to be in the .062" range for gas port diameter; 10.3 at .070" runs fantastic. Suppressed with .080" on a 13.x is going to need tuning of some sort with buffer/spring or adjustable gas block. |
|
|
MD, USA
|
Posted: 11/20/2018 3:10:50 PM EDT
[#43]
Quote HistoryOriginally Posted By BC98: It shouldn't be too bad if it's .080" on a midlength barrel. I believe that is what he is looking at doing.
Carry on! |
|
|
CO, USA
|
Posted: 11/21/2018 8:52:26 AM EDT
[#44]
Quote HistoryOriginally Posted By cjwwd2: If you use the Geissele 13" rail, definitely get a 13.7" barrel. The muzzle device lines up perfectly with the end of the rail. |
|
|
|
Posted: 11/21/2018 3:34:39 PM EDT
[#45]
Quote HistoryOriginally Posted By Teufelshunde: Dude that is awesome... How is the weight/balance? |
|
|
|
|
Posted: 11/21/2018 10:13:29 PM EDT
[#46]
Quote HistoryOriginally Posted By cjwwd2:
If you use the Geissele 13" rail, definitely get a 13.7" barrel. The muzzle device lines up perfectly with the end of the rail. https://i.imgur.com/OX30DIph.jpg Quote HistoryOriginally Posted By cjwwd2:
Originally Posted By Teufelshunde:
Alright gents, Mini Recce build in progress and I need ur input for new midlength 13.5" upper config. Going on an lmt or a psa sbr lower. 6.5" f1 can or sdn6. P4xi in a lt204 mount. I want rigid, quality and lightweight is nice.. Basic Aero Upper $70, Geissele MK14 mlok 13" rail $250........ $320 vs. Larue Stealth 2.0 upper and HG set... About $370 Planning to use a 14.7" CHF ml QPQ nitride cut to 13.5" by adco. https://midstatefirearms.com/147-Cold-Hammer-Forged-CHF-556-Nato-17-MidLength-Ar15-Barrel-147-chf-barrel.htm And who knows I just might talk myself into a Larue UU kit, but not sure yet.. Would sell off the lower accessories. https://i.imgur.com/OX30DIph.jpg My Infidel SBR 
|
|
|
|
MD, USA
|
Posted: 11/22/2018 11:01:03 AM EDT
[#47]
|
|
|
TX, USA
|
Posted: 11/22/2018 2:48:21 PM EDT
[#48]
I got my noveske sba3 brace and I ordered a black nitride Noveske BCG. The Black Friday code doesn’t work on marked down things but I got a code from them at the Noveske carbine. championship so I got the start of my Noveske mini recce
|
|
|
|
Posted: 11/22/2018 3:17:36 PM EDT
[#49]
Quote HistoryOriginally Posted By ArmedFerret:
Quote HistoryOriginally Posted By ArmedFerret:
Originally Posted By loudxpack: Had a really good day. Got her all sighted in @ 100 and was making very consistent shots @ 500 when prone with bipod. That 11.5” was putting in work and surprised me at that range!
https://www.AR15.Com/media/mediaFiles/472230/CFEC1640-88D4-41CA-83E0-5D8CACECEA98_jpeg-743418.JPG https://www.AR15.Com/media/mediaFiles/472230/362A8038-8FB7-4D14-89D0-4E0FEA8631AF_jpeg-743419.JPG https://www.AR15.Com/media/mediaFiles/472230/43ED742E-0D3F-4955-ADAE-CF04C86752F4_jpeg-743420.JPG https://www.AR15.Com/media/mediaFiles/472230/065E4DDE-90D3-492F-BBF7-81889D56F1B6_jpeg-743421.JPG https://www.AR15.Com/media/mediaFiles/472230/8BCF9B77-2199-47A0-B8FD-CB1E1185C95E_jpeg-743422.JPG
https://instagram.com/p/BqflnNOHhey/ |
|
|
|
|
Posted: 11/23/2018 1:08:47 AM EDT
[#50]
for you 11.5" users who use your mini recce more for close up with the occasional longer range shots, would you go with the nightforce 1-8 options or vortex razor 1-6?
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
