User Panel
For you guys that had a 80% lower engraved. Are there more than 2 different engraving schemes available for this series of clones? I sent an email out and in the reply I was shown a mock up of an M-16A1, then of course I saw the M4A1 here in this thread, but now I'm wondering if he does any more?
I'm really new to the clones, I didn't know anything about them until recently, don't know why....lol. It all started when I took my Nat'l Match A2 out a few months ago, fell in love with it again, then decided it needed an upgrade but in the middle of it just ended up building out an M16A4 to keep him company. We didn't even have them when I was in the Corps.. |
|
|
|
Purchased a PEQ-2A today. Uh oh Mod 0 is entering it's final stages.
|
|
|
Originally Posted By gck5150: Put together my Mod 0ish upper today. LMT 10.5", LMT rear sight, KAC RAS, Aimpoint ML3 in LaRue mount, B5 SOPMOD. It's temporarily on a lower that I normally use for my 300 BLK upper until the Form 1 is approved for it's very own lower. I need to decide what can to use. I have a few choices, I think I have already decided but I'm curious to hear what you guys think. My options are: -KAC QDC (aka Corncob Mk2) already in my possession, currently lives full time on a KAC 11.5" Mod 2. -Surefire RC2 already in my possession, currently lives full time on a KAC 16" Mod 1. -Sandman S should be approved any day now -Specwar K won't be approved for a while, but I have a Specwar 7.62 I can use in the meantime with the same mount. Of course if any of you guys know of an NT4 in stock in Texas there is that option, too... http://i802.photobucket.com/albums/yy306/gkanga/Mk18Mod0ish.jpg View Quote Looks good, gotta ditch that LT mount though lol... Big Larue user here too, it was hard to switch over to clone correct mounts (and triggers, have several MBT equipped... but the Wilcox is a decent mount I've found. KAC makes one as well and is the nice Alum one that the Wilcox is patterned after, I think? Bought a socom-rc for mine, partly b/c i will be able to use it one some other rifles, partly b/c I couldn't find an NT4 - but if I run across an NT4 I may pick one up as well. If it were me with your current inventory I would just run the QDC or RC2 for now and pick up an NT4 when you can find one. |
|
---
NRA Life Member USN Retired |
[quote]Originally Posted By Movistar:
Shooting unsuppressed is for the birds and criminals[/quote] |
How inaccurate would it be if I were to build a MK18 Mod 0 out of an A2 lower instead of an A1, and then stuck an A1 grip on it...
I only ask because NDS is out of stock on A1 lowers (And will be until after 41F takes effect) and I want to get an SBR without having to submit to the 41F nonsense. |
|
|
Originally Posted By parksyn:
How inaccurate would it be if I were to build a MK18 Mod 0 out of an A2 lower instead of an A1, and then stuck an A1 grip on it... I only ask because NDS is out of stock on A1 lowers (And will be until after 41F takes effect) and I want to get an SBR in without having to submit to the 41F nonsense. View Quote Not incorrect at all. Plenty of Block 1 CQBRs on M4A1 lowers, even still today. Grip is just preference. A2 would "look" more correct but A1 is just fine. |
|
|
Originally Posted By Zakk101abn:
Hell yea! PEQ 2 mod 0 maffioso http://i36.photobucket.com/albums/e21/zakk101abn/Mobile%20Uploads/image_zpswcuukgdq.jpeg View Quote View All Quotes View All Quotes Originally Posted By Zakk101abn:
Originally Posted By Bohguy:
Purchased a PEQ-2A today. Uh oh Mod 0 is entering it's final stages. http://i36.photobucket.com/albums/e21/zakk101abn/Mobile%20Uploads/image_zpswcuukgdq.jpeg looks heavy |
|
|
Originally Posted By JET55:
For you guys that had a 80% lower engraved. Are there more than 2 different engraving schemes available for this series of clones? I sent an email out and in the reply I was shown a mock up of an M-16A1, then of course I saw the M4A1 here in this thread, but now I'm wondering if he does any more? I'm really new to the clones, I didn't know anything about them until recently, don't know why....lol. It all started when I took my Nat'l Match A2 out a few months ago, fell in love with it again, then decided it needed an upgrade but in the middle of it just ended up building out an M16A4 to keep him company. We didn't even have them when I was in the Corps.. View Quote When you say you are wondering if "he" does any more, was it Braceman that showed you the M16A1 example? If so, he can do almost, if not all, engraving variations that you might want. Mk18's were originally built on M16A1 lowers. CQBR's are/were built on both M4 and M4A1 lowers, and they are marked differently with 2 different mfg rollmarks. |
|
|
Originally Posted By Spyider: Originally Posted By Zakk101abn: Originally Posted By Bohguy: Purchased a PEQ-2A today. Uh oh Mod 0 is entering it's final stages. http://i36.photobucket.com/albums/e21/zakk101abn/Mobile%20Uploads/image_zpswcuukgdq.jpeg looks heavy |
|
[quote]Originally Posted By Movistar:
Shooting unsuppressed is for the birds and criminals[/quote] |
Originally Posted By NickOTime:
Here are some close up pics of the rail post chop. The spray job is pretty rough, but I figured it would do until I paint the whole upper. http://i.imgur.com/UwFZulX.jpg http://i.imgur.com/8IBz7YH.jpg This one looks the roughest as I was rushing to get the paint on. At least its hidden under the top rail anyways http://i.imgur.com/kLlQIXv.jpg A rough idea of what I am going for sans ACOG http://i.imgur.com/o6Hdhl1.jpg View Quote What did you use to cut it? |
|
|
For those with both a Mk18 mod 0 and mod 1, which do you enjoy shooting the most?
|
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
|
Originally Posted By emtothedee:
What did you use to cut it? View Quote View All Quotes View All Quotes Originally Posted By emtothedee:
Originally Posted By NickOTime:
Here are some close up pics of the rail post chop. The spray job is pretty rough, but I figured it would do until I paint the whole upper. http://i.imgur.com/UwFZulX.jpg http://i.imgur.com/8IBz7YH.jpg This one looks the roughest as I was rushing to get the paint on. At least its hidden under the top rail anyways http://i.imgur.com/kLlQIXv.jpg A rough idea of what I am going for sans ACOG http://i.imgur.com/o6Hdhl1.jpg What did you use to cut it? A beer, a brand spanking new hacksaw blade, one Dremel cutting disc, and a bastard mill to "smooth" her out after I was all done. I almost had a lapse of judgement and nearly chopped off the 2 front screw holes to mount the lower rail to the upper. ETA: I almost forgot that I used a dremel "sanding" bit to smooth out the lower rail section to "melt" cuts a hair as they don't quite line up perfectly when cut. |
|
|
|
Originally Posted By The_Hammer:
For those with both a Mk18 mod 0 and mod 1, which do you enjoy shooting the most? View Quote You can't go wrong with either one. I like the mod 1 better because of the extra rail space that allows me to grip the rifle further out and position the light/laser switches in the best spot for me. |
|
|
|
Originally Posted By parksyn:
I went with Mod 0 because of Insurgency. Anyone here play? View Quote View All Quotes View All Quotes Originally Posted By parksyn:
Originally Posted By The_Hammer:
For those with both a Mk18 mod 0 and mod 1, which do you enjoy shooting the most? I went with Mod 0 because of Insurgency. Anyone here play? I would drop all the other slots so I could fully equip the MK18, the thing is a beast in game. |
|
|
|
Collecting parts for a mod 1 right now.. Snagged a mk18 rail for $350 on the EE last week. Anyone have the link for the clones page on fb?
|
|
|
that guy who did that thing that one time
CT, USA
|
Originally Posted By 78Staff: Looks good, gotta ditch that LT mount though lol... Big Larue user here too, it was hard to switch over to clone correct mounts (and triggers, have several MBT equipped... but the Wilcox is a decent mount I've found. KAC makes one as well and is the nice Alum one that the Wilcox is patterned after, I think? View Quote View All Quotes View All Quotes Originally Posted By 78Staff: Originally Posted By gck5150: Put together my Mod 0ish upper today. LMT 10.5", LMT rear sight, KAC RAS, Aimpoint ML3 in LaRue mount, B5 SOPMOD. It's temporarily on a lower that I normally use for my 300 BLK upper until the Form 1 is approved for it's very own lower. I need to decide what can to use. I have a few choices, I think I have already decided but I'm curious to hear what you guys think. My options are: -KAC QDC (aka Corncob Mk2) already in my possession, currently lives full time on a KAC 11.5" Mod 2. -Surefire RC2 already in my possession, currently lives full time on a KAC 16" Mod 1. -Sandman S should be approved any day now -Specwar K won't be approved for a while, but I have a Specwar 7.62 I can use in the meantime with the same mount. Of course if any of you guys know of an NT4 in stock in Texas there is that option, too... http://i802.photobucket.com/albums/yy306/gkanga/Mk18Mod0ish.jpg |
"The way I see it, the asshole with all the bullet holes should explain why he's bleeding all over your floor." -Sgt_Fish
|
|
Originally Posted By Stoner25mkiv:
When you say you are wondering if "he" does any more, was it Braceman that showed you the M16A1 example? If so, he can do almost, if not all, engraving variations that you might want. Mk18's were originally built on M16A1 lowers. CQBR's are/were built on both M4 and M4A1 lowers, and they are marked differently with 2 different mfg rollmarks. View Quote View All Quotes View All Quotes Originally Posted By Stoner25mkiv:
Originally Posted By JET55:
For you guys that had a 80% lower engraved. Are there more than 2 different engraving schemes available for this series of clones? I sent an email out and in the reply I was shown a mock up of an M-16A1, then of course I saw the M4A1 here in this thread, but now I'm wondering if he does any more? I'm really new to the clones, I didn't know anything about them until recently, don't know why....lol. It all started when I took my Nat'l Match A2 out a few months ago, fell in love with it again, then decided it needed an upgrade but in the middle of it just ended up building out an M16A4 to keep him company. We didn't even have them when I was in the Corps.. When you say you are wondering if "he" does any more, was it Braceman that showed you the M16A1 example? If so, he can do almost, if not all, engraving variations that you might want. Mk18's were originally built on M16A1 lowers. CQBR's are/were built on both M4 and M4A1 lowers, and they are marked differently with 2 different mfg rollmarks. Yep, I emailed Braceman. And I've been looking at roll marks and specs all evening. Thanks for the info on the lowers! I've actually compiled an excel spreadsheet to help me learn what's what. And I'm pretty close to figuring out what I'm getting engraved. Not sure how far I'll take this yet though. To be honest I've seen a lot of variations in usgi Mk18's. Enough so to think that there is no defacto list other then certain items like the rail, barrel, sights that certain Mk18's may have. It's pretty interesting! |
|
|
Originally Posted By SecretSquirell:
IT'S ALIVE!!! http://i260.photobucket.com/albums/ii33/perrymclovin/C122DF00-B1C4-4DC6-883E-50688F6B0E5B_zpsnarc8jse.jpg View Quote You know PSA buffers are Chinese right? |
|
Needs more BEEF EL.
If you have to ask, it's ghetto.. FO! FO full retard. |
Originally Posted By fridge72:
You know PSA buffers are Chinese right? View Quote View All Quotes View All Quotes Originally Posted By fridge72:
Originally Posted By SecretSquirell:
IT'S ALIVE!!! http://i260.photobucket.com/albums/ii33/perrymclovin/C122DF00-B1C4-4DC6-883E-50688F6B0E5B_zpsnarc8jse.jpg You know PSA buffers are Chinese right? Source? |
|
|
Originally Posted By parksyn:
Originally Posted By fridge72:
Originally Posted By SecretSquirell:
IT'S ALIVE!!! http://i260.photobucket.com/albums/ii33/perrymclovin/C122DF00-B1C4-4DC6-883E-50688F6B0E5B_zpsnarc8jse.jpg You know PSA buffers are Chinese right? Source? Put a couple thousand rounds through them and tell me they are American with a straight face.. |
|
Needs more BEEF EL.
If you have to ask, it's ghetto.. FO! FO full retard. |
Originally Posted By lostman518:
Forgive my lack of clone etiquette but I'm around page 550 in the thread and saw an issued rifle with a Larue mount. I'm an LT fanboy so mine is staying. With a weird stroke of luck I found a rail today for a steal. Planning on getting the correct sling plate even though I saw a post in the thread with a bunch of pictures of the ASAP plate being used. <a href="http://s43.photobucket.com/user/lostman518/media/31C74250-F0B0-4285-A805-86D644D8817B_zpshbrdp5ln.jpg.html" target="_blank">http://i43.photobucket.com/albums/e363/lostman518/31C74250-F0B0-4285-A805-86D644D8817B_zpshbrdp5ln.jpg</a> View Quote View All Quotes View All Quotes Originally Posted By lostman518:
Originally Posted By 78Staff:
Originally Posted By gck5150:
Put together my Mod 0ish upper today. LMT 10.5", LMT rear sight, KAC RAS, Aimpoint ML3 in LaRue mount, B5 SOPMOD. It's temporarily on a lower that I normally use for my 300 BLK upper until the Form 1 is approved for it's very own lower. I need to decide what can to use. I have a few choices, I think I have already decided but I'm curious to hear what you guys think. My options are: -KAC QDC (aka Corncob Mk2) already in my possession, currently lives full time on a KAC 11.5" Mod 2. -Surefire RC2 already in my possession, currently lives full time on a KAC 16" Mod 1. -Sandman S should be approved any day now -Specwar K won't be approved for a while, but I have a Specwar 7.62 I can use in the meantime with the same mount. Of course if any of you guys know of an NT4 in stock in Texas there is that option, too... http://i802.photobucket.com/albums/yy306/gkanga/Mk18Mod0ish.jpg <a href="http://s43.photobucket.com/user/lostman518/media/31C74250-F0B0-4285-A805-86D644D8817B_zpshbrdp5ln.jpg.html" target="_blank">http://i43.photobucket.com/albums/e363/lostman518/31C74250-F0B0-4285-A805-86D644D8817B_zpshbrdp5ln.jpg</a> I'd say build the rifle you want unless you're trying to impress the clone whores in this thread. If you want to be clone correct then have at it. The Larue mount along wit the ASAP plate have been seen in the wild but the ninnies will tell you you're wrong. |
|
|
Originally Posted By JET55:
Yep, I emailed Braceman. And I've been looking at roll marks and specs all evening. Thanks for the info on the lowers! I've actually compiled an excel spreadsheet to help me learn what's what. And I'm pretty close to figuring out what I'm getting engraved. Not sure how far I'll take this yet though. To be honest I've seen a lot of variations in usgi Mk18's. Enough so to think that there is no defacto list other then certain items like the rail, barrel, sights that certain Mk18's may have. It's pretty interesting! View Quote View All Quotes View All Quotes Originally Posted By JET55:
Originally Posted By Stoner25mkiv:
Originally Posted By JET55:
For you guys that had a 80% lower engraved. Are there more than 2 different engraving schemes available for this series of clones? I sent an email out and in the reply I was shown a mock up of an M-16A1, then of course I saw the M4A1 here in this thread, but now I'm wondering if he does any more? I'm really new to the clones, I didn't know anything about them until recently, don't know why....lol. It all started when I took my Nat'l Match A2 out a few months ago, fell in love with it again, then decided it needed an upgrade but in the middle of it just ended up building out an M16A4 to keep him company. We didn't even have them when I was in the Corps.. When you say you are wondering if "he" does any more, was it Braceman that showed you the M16A1 example? If so, he can do almost, if not all, engraving variations that you might want. Mk18's were originally built on M16A1 lowers. CQBR's are/were built on both M4 and M4A1 lowers, and they are marked differently with 2 different mfg rollmarks. Yep, I emailed Braceman. And I've been looking at roll marks and specs all evening. Thanks for the info on the lowers! I've actually compiled an excel spreadsheet to help me learn what's what. And I'm pretty close to figuring out what I'm getting engraved. Not sure how far I'll take this yet though. To be honest I've seen a lot of variations in usgi Mk18's. Enough so to think that there is no defacto list other then certain items like the rail, barrel, sights that certain Mk18's may have. It's pretty interesting! Just be sure that you don't confuse CQBR block I and ii with mk18. |
|
|
Originally Posted By schaffer:
I'd say build the rifle you want unless you're trying to impress the clone whores in this thread. View Quote Just one "problem" with that: this is a clone thread...you know, for people who are trying to build accurate clones of their or other's issue weapons. So if you're not interested in building at least a fairly accurate clone, this thread's not for you. |
|
"I'll tell you what war is about, you've got to kill people, and when you've killed enough they stop fighting." GEN Curtis LeMay
"Someday this war's gonna end..." LTC William Kilgore |
Originally Posted By fridge72:
You know PSA buffers are Chinese right? View Quote View All Quotes View All Quotes Originally Posted By fridge72:
Originally Posted By SecretSquirell:
IT'S ALIVE!!! http://i260.photobucket.com/albums/ii33/perrymclovin/C122DF00-B1C4-4DC6-883E-50688F6B0E5B_zpsnarc8jse.jpg You know PSA buffers are Chinese right? It's all I had laying around. It was on there just so I could function check it with the upper. The old buffer tube that I had was a commercial tube too |
|
Squire
CVMA Chapter 24-2 "Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 |
Originally Posted By fridge72:
Put a couple thousand rounds through them and tell me they are American with a straight face.. View Quote View All Quotes View All Quotes Originally Posted By fridge72:
Originally Posted By parksyn:
Originally Posted By fridge72:
Originally Posted By SecretSquirell:
IT'S ALIVE!!! http://i260.photobucket.com/albums/ii33/perrymclovin/C122DF00-B1C4-4DC6-883E-50688F6B0E5B_zpsnarc8jse.jpg You know PSA buffers are Chinese right? Source? Put a couple thousand rounds through them and tell me they are American with a straight face.. I've got a couple with PSA buffers and have never had an issue. |
|
Squire
CVMA Chapter 24-2 "Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 |
lol buffer shaming is a thing now?
|
|
Aut Vincere, Aut Mori
|
Originally Posted By carmodyh:
After having and shooting tons of sbr configs, to include a mod 0 and mod 1.... The mod 0 has been my favorite. Just shoots like a dream View Quote View All Quotes View All Quotes Originally Posted By carmodyh:
Originally Posted By The_Hammer:
For those with both a Mk18 mod 0 and mod 1, which do you enjoy shooting the most? After having and shooting tons of sbr configs, to include a mod 0 and mod 1.... The mod 0 has been my favorite. Just shoots like a dream I've toyed with the idea of changing my mod 0 to a mod 1 for the extra rail space but I've decided not to do it. I just enjoy the mod 0 too much. |
|
I now have a ban button. Want to see me use it? Keep it up. - Lancelot
You do not fight out of hate, but rather out of the love and compassion you have for those you are trying to protect. |
So what do you think. A CQBR with a Magpul D60 drum?
|
|
|
|
|
|
Originally Posted By tango6delta:
lol buffer shaming is a thing now? View Quote Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. |
|
|
Squire
CVMA Chapter 24-2 "Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 |
Originally Posted By JET55:
Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. View Quote View All Quotes View All Quotes Originally Posted By JET55:
Originally Posted By tango6delta:
lol buffer shaming is a thing now? Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. No no......it's ok.........I'll see myself out the door til I can acquire a buffer that I can trace it's legacy directly to Colt with a certificate of authenticity. Sarcasm BTW..........fuck that other guy. |
|
Squire
CVMA Chapter 24-2 "Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 |
Originally Posted By SecretSquirell:
No no......it's ok.........I'll see myself out the door til I can acquire a buffer that I can trace it's legacy directly to Colt with a certificate of authenticity. Sarcasm BTW..........fuck that other guy. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell:
Originally Posted By JET55:
Originally Posted By tango6delta:
lol buffer shaming is a thing now? Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. No no......it's ok.........I'll see myself out the door til I can acquire a buffer that I can trace it's legacy directly to Colt with a certificate of authenticity. Sarcasm BTW..........fuck that other guy. Man, I am running JP silent capture springs in my clones..... |
|
|
Originally Posted By NickOTime:
Man, I am running JP silent capture springs in my clones..... View Quote View All Quotes View All Quotes Originally Posted By NickOTime:
Originally Posted By SecretSquirell:
Originally Posted By JET55:
Originally Posted By tango6delta:
lol buffer shaming is a thing now? Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. No no......it's ok.........I'll see myself out the door til I can acquire a buffer that I can trace it's legacy directly to Colt with a certificate of authenticity. Sarcasm BTW..........fuck that other guy. Man, I am running JP silent capture springs in my clones..... You better leave too |
|
Squire
CVMA Chapter 24-2 "Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 |
Originally Posted By NickOTime:
Man, I am running JP silent capture springs in my clones..... View Quote View All Quotes View All Quotes Originally Posted By NickOTime:
Originally Posted By SecretSquirell:
Originally Posted By JET55:
Originally Posted By tango6delta:
lol buffer shaming is a thing now? Really.... We know this is a clone thread but nitpicking just one part out of a great photo is a little too much. He went out of his way to engrave that lower, it looks fantastic. The focus was the lower and the rest of us are glad to see it. What is irrelevant to the thread are comments about stuff that are not the focus of the photo. Comments should be constructive and positive, why rub someone the wrong way for no reason? We're all here to encourage each other aren't we? We don't know why he had the buffer in there or if he was taking it out and it shouldn't make a difference. No no......it's ok.........I'll see myself out the door til I can acquire a buffer that I can trace it's legacy directly to Colt with a certificate of authenticity. Sarcasm BTW..........fuck that other guy. Man, I am running JP silent capture springs in my clones..... |
|
|
Forgive my ignorance...is there a difference between a Mk18 Mod 1 and an M4A1 CQBR Mod 1? (I know, I know...stupid question, right?!)
I've read the specs in post 1, but I keep seeing people saying they'd choose the Mod 0 vs Mod 1, because there is more rail space. I'm confused though, because I thought the RIS (Mk18 mod 0) and RAS (M4A1 CQBR Block 1) were the same length rail??? I figured they were talking about the Mk18 vs the CQBR Block 1 and were just using "Mod 1" for "Block 1", but now I'm thinking there is a Mod 0 and Mod 1 Mk18 that are different from the CQBRs. If so, can someone post the specs of the Mk18 Mod 1, or point me in the direction of the specs? Thanks! |
|
|
Originally Posted By smitty_007:
Forgive my ignorance...is there a difference between a Mk18 Mod 1 and an M4A1 CQBR Mod 1? (I know, I know...stupid question, right?!) I've read the specs in post 1, but I keep seeing people saying they'd choose the Mod 0 vs Mod 1, because there is more rail space. I'm confused though, because I thought the RIS (Mk18 mod 0) and RAS (M4A1 CQBR Block 1) were the same length rail??? I figured they were talking about the Mk18 vs the CQBR Block 1 and were just using "Mod 1" for "Block 1", but now I'm thinking there is a Mod 0 and Mod 1 Mk18 that are different from the CQBRs. If so, can someone post the specs of the Mk18 Mod 1, or point me in the direction of the specs? Thanks! View Quote TinyCrumb posted all of the specs on page one. |
|
|
Originally Posted By parksyn:
TinyCrumb posted all of the specs on page one. View Quote View All Quotes View All Quotes Originally Posted By parksyn:
Originally Posted By smitty_007:
Forgive my ignorance...is there a difference between a Mk18 Mod 1 and an M4A1 CQBR Mod 1? (I know, I know...stupid question, right?!) I've read the specs in post 1, but I keep seeing people saying they'd choose the Mod 0 vs Mod 1, because there is more rail space. I'm confused though, because I thought the RIS (Mk18 mod 0) and RAS (M4A1 CQBR Block 1) were the same length rail??? I figured they were talking about the Mk18 vs the CQBR Block 1 and were just using "Mod 1" for "Block 1", but now I'm thinking there is a Mod 0 and Mod 1 Mk18 that are different from the CQBRs. If so, can someone post the specs of the Mk18 Mod 1, or point me in the direction of the specs? Thanks! TinyCrumb posted all of the specs on page one. Okay, so then the M4A1 CQBR Block 1 is synonymous with Mk18 Mod 1? If that is the case, why have I seen people say they like having more rail space on the Mk18 Mod 1 vs the Mod 1? Is that just because there is less "stuff" on the rail of a Mod 0 or am I missing something here?! Oh, and Happy Father's Day to all the Arfcom Dads! |
|
|
Originally Posted By smitty_007:
Okay, so then the M4A1 CQBR Block 1 is synonymous with Mk18 Mod 1? If that is the case, why have I seen people say they like having more rail space on the Mk18 Mod 1 vs the Mod 1? Is that just because there is less "stuff" on the rail of a Mod 0 or am I missing something here?! Oh, and Happy Father's Day to all the Arfcom Dads! View Quote View All Quotes View All Quotes Originally Posted By smitty_007:
Originally Posted By parksyn:
Originally Posted By smitty_007:
Forgive my ignorance...is there a difference between a Mk18 Mod 1 and an M4A1 CQBR Mod 1? (I know, I know...stupid question, right?!) I've read the specs in post 1, but I keep seeing people saying they'd choose the Mod 0 vs Mod 1, because there is more rail space. I'm confused though, because I thought the RIS (Mk18 mod 0) and RAS (M4A1 CQBR Block 1) were the same length rail??? I figured they were talking about the Mk18 vs the CQBR Block 1 and were just using "Mod 1" for "Block 1", but now I'm thinking there is a Mod 0 and Mod 1 Mk18 that are different from the CQBRs. If so, can someone post the specs of the Mk18 Mod 1, or point me in the direction of the specs? Thanks! TinyCrumb posted all of the specs on page one. Okay, so then the M4A1 CQBR Block 1 is synonymous with Mk18 Mod 1? If that is the case, why have I seen people say they like having more rail space on the Mk18 Mod 1 vs the Mod 1? Is that just because there is less "stuff" on the rail of a Mod 0 or am I missing something here?! Oh, and Happy Father's Day to all the Arfcom Dads! The CQBR Block 1 and the MK18 Mod 0 are similar. The MK18 Mod 1 has the Daniel Defense rail and a free float barrel. You're very confused |
|
|
MK18 - Full issued gun. Looks simialr to the CQBR Block I
CQBR Block 1 - It's a URG for the M4 and looks like a MK18 CQBR Block II - It's what airsofters call a MK18 Mod 1. |
|
|
Originally Posted By ECPrevatte:
MK18 - Full issued gun. Looks simialr to the CQBR Block I CQBR Block 1 - It's a URG for the M4 and looks like a MK18 CQBR Block II - It's what airsofters call a MK18 Mod 1. View Quote This is pretty cut and dry. I've been seeing mod1 so much on the past few pages and wanted to say something..... What were the ones that were marked mod1 though? They weren't blockii's were they? I vaguely seeing a couple marked us navy mk18 mod1? |
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.