User Panel
User Panel
User Panel
|
Posted: 10/3/2015 9:41:34 AM EDT
[#1]
Quote HistoryOriginally Posted By dylang32:
A few more pics from class a few weeks ago http://i78.photobucket.com/albums/j107/dylang32/Mobile%20Uploads/IMG_3689_zpsbtdcuqov.jpg http://i78.photobucket.com/albums/j107/dylang32/Mobile%20Uploads/IMG_3691_zpstsji8bou.png http://i78.photobucket.com/albums/j107/dylang32/Mobile%20Uploads/IMG_3686_zpsq0yzuhxw.jpg http://i78.photobucket.com/albums/j107/dylang32/Mobile%20Uploads/IMG_3690_zpslkfqck7o.png Nice! Would operate with. 
|
|
|
|
|
Posted: 10/3/2015 9:47:02 AM EDT
[#2]
Quote HistoryOriginally Posted By Conspiro-Agnew:
Sure thing! Most recent paint job: https://farm6.staticflickr.com/5753/21902774935_e094fa7439_b.jpg Paints I used on the above weapon: https://farm1.staticflickr.com/644/21139961374_d64201fb3e_b.jpg Aside from the rattle cans, I also picked up one of these nets. First thing you want to do is wash your weapon, degrease it, use rubbing alcohol, simple green, whatever, just to get the oils off so the paint will stay. I started with a tan coating. Painted one side, let it sit 15-20 minutes, flipped it to the other side, and painted that side tan too. Shake your cans up well, and make sure they aren't spitting droplets out. Hold it close enough to coat, far enough to not cause runs. I want to say it was about 18 or so inches. A Test spray on cardboard will help you judge. After the first coat dried, I laid the netting over the entire weapon, and did some stripes of the lighter green here or there. Some vertical, some diagonal. Waited until it was dry, repeated on the other side. After that, flipped it back, laid the net, making sure that it wasn't laid in the same place, so that when I painted, I wouldn't be creating the same lines. Applied a couple of olive stripes or spots, let it dry, repeat on the other side. Once agin, let it dry, put the net over it differently, did a run of dark brown. Let it dry, flipped it, rinse and repeat. After it dried this time, instead of going right to the net, I started looking for where it was too dark, where there were dark spots, and where there were large light spots. In the areas that seemed to dark, I would place the net over that area, and hit it with some tan again. In the light areas, I would hit it with either one of the greens or the brown, depending on what seemed wasn't present in the area. Both sides, let it dry, and then repeated the spot painting, each time, making sure my net was different. Be sure to go over the original lines with other colors, some of the tan with darker colors, some of the darker colors with tan, so that the lines stand out, breaking up the pattern. The great thing about rattle cans, is if at first you don't like it, you can just keep going until you do. Hope that helps, and let me know if you have any other questions. Quote HistoryOriginally Posted By Conspiro-Agnew:
Originally Posted By CloneDiseased:
Originally Posted By Conspiro-Agnew:
Originally Posted By CloneDiseased:
Snip Well done!  it doesn't get much better than ringing steel with the SOCOM quietness 
...was wondering if you could repost a pic of your CQBR and run us through the rattlecan method you used??? Sure thing! Most recent paint job: https://farm6.staticflickr.com/5753/21902774935_e094fa7439_b.jpg Paints I used on the above weapon: https://farm1.staticflickr.com/644/21139961374_d64201fb3e_b.jpg Aside from the rattle cans, I also picked up one of these nets. First thing you want to do is wash your weapon, degrease it, use rubbing alcohol, simple green, whatever, just to get the oils off so the paint will stay. I started with a tan coating. Painted one side, let it sit 15-20 minutes, flipped it to the other side, and painted that side tan too. Shake your cans up well, and make sure they aren't spitting droplets out. Hold it close enough to coat, far enough to not cause runs. I want to say it was about 18 or so inches. A Test spray on cardboard will help you judge. After the first coat dried, I laid the netting over the entire weapon, and did some stripes of the lighter green here or there. Some vertical, some diagonal. Waited until it was dry, repeated on the other side. After that, flipped it back, laid the net, making sure that it wasn't laid in the same place, so that when I painted, I wouldn't be creating the same lines. Applied a couple of olive stripes or spots, let it dry, repeat on the other side. Once agin, let it dry, put the net over it differently, did a run of dark brown. Let it dry, flipped it, rinse and repeat. After it dried this time, instead of going right to the net, I started looking for where it was too dark, where there were dark spots, and where there were large light spots. In the areas that seemed to dark, I would place the net over that area, and hit it with some tan again. In the light areas, I would hit it with either one of the greens or the brown, depending on what seemed wasn't present in the area. Both sides, let it dry, and then repeated the spot painting, each time, making sure my net was different. Be sure to go over the original lines with other colors, some of the tan with darker colors, some of the darker colors with tan, so that the lines stand out, breaking up the pattern. The great thing about rattle cans, is if at first you don't like it, you can just keep going until you do. Hope that helps, and let me know if you have any other questions. I was so close to getting the SOCOM suppressor. I ended up going with the AAC M42000, but it is a bit heavy. How do you like the Surefire? Is it really worth the money? 
|
|
|
|
|
Posted: 10/3/2015 10:10:17 AM EDT
[Last Edit: Conspiro-Agnew]
[#3]
Quote HistoryOriginally Posted By BLACKLIGHT:
Dam that looks great dude.Quote HistoryOriginally Posted By BLACKLIGHT:
Dam that looks great dude.Thanks bud! 
Originally Posted By DoctorLove:
I was so close to getting the SOCOM suppressor. I ended up going with the AAC M42000, but it is a bit heavy. How do you like the Surefire? Is it really worth the money? http://i821.photobucket.com/albums/zz135/556man1/IMG_0143_zpsunrjfgbn.jpg?t=1443676473 To be honest, I don't have too much experience with other cans to make a personal comparison. I have shot with a friend who owns the same AAC, and it sounds quite to me, both as an observer, and taking turns shooting each other's weapons. That said, I do like it, and have another SOCOM sitting in jail waiting on the stamp to come in. The one I really want is an NT4, but that'll have to be some time later, as my next project is going to be NV. All in all, though, I'm happy with it.
|
|
|
|
TX, USA
|
Posted: 10/3/2015 10:11:13 AM EDT
[#4]
Shorty at the bottom
|
|
|
|
Posted: 10/3/2015 10:11:59 AM EDT
[#5]
Quote HistoryDude! Well done! |
|
|
|
|
Posted: 10/3/2015 12:58:05 PM EDT
[#6]
Why do we see the LMT rear sight on the mod 0 but nothing else? Not even M4 1/1.5's.
|
|
|
|
|
Posted: 10/3/2015 2:12:05 PM EDT
[#7]
Quote HistoryOriginally Posted By AmericanCheese:
Why do we see the LMT rear sight on the mod 0 but nothing else? Not even M4 1/1.5's. I believe the correct answer is because the Mk18 Mod 0 isn't a SOPMOD weapon per se, like everything else we clone. Plus flip down rear BUIS destroys fixed rears when using an RDS. I absolutely HATE fixed rears with an RDS. |
|
|
|
AZ, USA
|
Posted: 10/3/2015 2:40:43 PM EDT
[#8]
Quote HistoryHow do you like the Surefire? Is it really worth the money? yes |
|
|
|
Posted: 10/3/2015 3:23:29 PM EDT
[#9]
|
|
|
|
|
Posted: 10/3/2015 3:24:21 PM EDT
[#10]
Quote HistoryOriginally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr  kinda there....but betterThat paint makes me horny |
|
|
|
|
Posted: 10/3/2015 3:27:41 PM EDT
[#11]
Quote HistoryOriginally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother
|
|
|
|
|
Posted: 10/3/2015 3:29:33 PM EDT
[#12]
Quote HistoryOriginally Posted By MILSPEC556:
Man that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 |
|
|
|
|
Posted: 10/3/2015 3:30:41 PM EDT
[#13]
That c4 rail is smexy
|
|
|
|
|
Posted: 10/3/2015 3:34:03 PM EDT
[#14]
Quote HistoryOriginally Posted By Finslayer83:
have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Quote HistoryOriginally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Very nice. 
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. 
|
|
|
|
|
Posted: 10/3/2015 3:35:10 PM EDT
[#15]
Quote HistoryOriginally Posted By MILSPEC556:
Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. I really need to get on the fsp project |
|
|
|
|
Posted: 10/3/2015 3:39:19 PM EDT
[#16]
Quote HistoryOriginally Posted By Patchgunner:
I really need to get on the fsp project Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. I really need to get on the fsp project Me too bro. I wish I could afford to snag another one to chop up and turn my block 1 CQBR into an FSP B2 CQBR. But luckily the 14.5 FSP floats my boat just as much. |
|
|
|
|
Posted: 10/3/2015 3:44:08 PM EDT
[#17]
Quote HistoryOriginally Posted By MILSPEC556:
Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. why I said "kinda there...but better"
|
|
|
|
|
Posted: 10/3/2015 3:45:25 PM EDT
[#18]
Quote HistoryOriginally Posted By Finslayer83:
why I said "kinda there...but better"
Quote HistoryOriginally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
Originally Posted By MILSPEC556:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterMan that looks good, Fin. Usually I give people shit for the B5 bravo, but you have a real SOPMOD in the same pic, so no shit will be given. That paint looks awesome as always brother have a FDE SOPMOD that should arrive next week going on it - that is just a place holder. Moved the one that was on it to the Geissele 14.5 Very nice.
I just realized we're in the Mk18 thread and not 14.5, so I shall warn you the C4 rail might catch some flak from certain members. But you probably already know that possibility. why I said "kinda there...but better"
It's all good I'm sure the c4 is fine since some ppl just post pics of just an upper
|
|
|
|
|
Posted: 10/3/2015 3:50:10 PM EDT
[Last Edit: MILSPEC556]
[#19]
Patch, CQBR stands for Close Quarters Battle Receiver. It literally IS just an upper.
|
|
|
|
|
Posted: 10/3/2015 3:51:47 PM EDT
[#20]
Quote HistoryOriginally Posted By MILSPEC556:
Patch, CQBR stands for Close Quarters Battle Receiver. It literally IS just an upper. Shhhhh I'm trying to fit in by making useless banter. What size gas port? |
|
|
|
|
Posted: 10/3/2015 3:52:57 PM EDT
[#21]
Quote HistoryOriginally Posted By Patchgunner:
Shhhhh I'm trying to fit in by making useless banter. What size gas port? Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By MILSPEC556:
Patch, CQBR stands for Close Quarters Battle Receiver. It literally IS just an upper. Shhhhh I'm trying to fit in by making useless banter. What size gas port? .078.
What's your gas port diameter brah? My gas port will beat your gas ports ass.
|
|
|
|
|
Posted: 10/3/2015 3:58:06 PM EDT
[#22]
Quote HistoryOriginally Posted By MILSPEC556:
.078.
What's your gas port diameter brah? My gas port will beat your gas ports ass. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Patchgunner:
Originally Posted By MILSPEC556:
Patch, CQBR stands for Close Quarters Battle Receiver. It literally IS just an upper. Shhhhh I'm trying to fit in by making useless banter. What size gas port? .078.
What's your gas port diameter brah? My gas port will beat your gas ports ass. I micd the dd barrel hot at .08 . But whatever ppl spend too much time worrying about gas ports. If it shoots everything fine than its gtg
|
|
|
|
|
Posted: 10/3/2015 3:58:53 PM EDT
[#23]
PSA 10.5" upper for mod 0 project.....fuck it, I'm going down with the ship. M2, RIS, M961, A1 pistol grip....this may cost me my marriage.
|
|
|
|
|
Posted: 10/3/2015 4:00:44 PM EDT
[#24]
Quote HistoryOriginally Posted By AmericanCheese:
PSA 10.5" upper for mod 0 project.....fuck it, I'm going down with the ship. M2, RIS, M961, A1 pistol grip....this may cost me my marriage. Marriages are over rated. I've had two
|
|
|
|
|
Posted: 10/3/2015 4:04:42 PM EDT
[#25]
It's true! Guns are forever, marriages come and go. I may need to sell my DD 10.3 upper though, but trying not to.
|
|
|
|
AZ, USA
|
Posted: 10/3/2015 4:33:43 PM EDT
[#26]
|
|
|
|
Posted: 10/3/2015 4:36:10 PM EDT
[#27]
Quote HistoryOriginally Posted By AZMAN42:
http://<a href=http://i612.photobucket.com/albums/tt207/Thewalknglead/Screen%20Shot%202015-10-03%20at%201.20.24%20PM_zpssq8orqts.png</a>" /> <a href="http://s612.photobucket.com/user/Thewalknglead/media/Screen%20Shot%202015-10-03%20at%201.22.16%20PM_zpshd0i8myb.png.html" target="_blank">http://i612.photobucket.com/albums/tt207/Thewalknglead/Screen%20Shot%202015-10-03%20at%201.22.16%20PM_zpshd0i8myb.png</a> Its not a 100% clone but its on its way
Very cool I'm waiting on that exact can for my dd upper. Did you feature that in a YouTube video by chance ? |
|
|
|
AZ, USA
|
Posted: 10/3/2015 4:38:30 PM EDT
[Last Edit: AZMAN42]
[#28]
Yupp! that was me
i have been a lurker on these forums for years, haha just now jumping into the forum game |
|
|
|
Posted: 10/3/2015 4:40:25 PM EDT
[#29]
Quote HistoryOriginally Posted By AZMAN42:
Yupp! that was me You made my sot $ lol. That vid was the reason I bought the spec war k great fucking can |
|
|
|
AZ, USA
|
Posted: 10/3/2015 4:46:24 PM EDT
[#30]
I think Im entitled to 10% of all revenue gained off my videos lol Just messing.
I love the Specwar-K its a tank.. |
|
|
|
Posted: 10/3/2015 4:48:47 PM EDT
[#31]
Quote HistoryOriginally Posted By AZMAN42:
I think Im entitled to 10% of all revenue gained off my videos lol Just messing. I love the Specwar-K its a tank.. What buffer are you running and is that a complete commercial dd upper ? |
|
|
|
|
Posted: 10/3/2015 4:50:12 PM EDT
[#32]
Quote HistoryOriginally Posted By Patchgunner:
What buffer are you running and is that a complete commercial dd upper ? Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By AZMAN42:
I think Im entitled to 10% of all revenue gained off my videos lol Just messing. I love the Specwar-K its a tank.. What buffer are you running and is that a complete commercial dd upper ? Judging by the markings on his upper (not from DD custom shop) I'm fairly certain he has the commercial port. |
|
|
|
|
Posted: 10/3/2015 4:53:29 PM EDT
[#33]
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
 |
|
|
|
AZ, USA
|
Posted: 10/3/2015 4:54:03 PM EDT
[#34]
H2, its a Stock DD upper but as a left handed shooter I had to run a SLR adjustable gas block "the clone gods are crying" the gas was just way over the top, I run it suppressed 100% of the time, the gas is still there but its bearable.
Noob question but am I responding to these questions correctly by just clicking Reply? |
|
|
|
Posted: 10/3/2015 4:54:16 PM EDT
[#35]
Quote HistoryOriginally Posted By MILSPEC556:
Judging by the markings on his upper (not from DD custom shop) I'm fairly certain he has the commercial port. Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Patchgunner:
Originally Posted By AZMAN42:
I think Im entitled to 10% of all revenue gained off my videos lol Just messing. I love the Specwar-K its a tank.. What buffer are you running and is that a complete commercial dd upper ? Judging by the markings on his upper (not from DD custom shop) I'm fairly certain he has the commercial port. Just verifying |
|
|
|
|
Posted: 10/3/2015 4:55:33 PM EDT
[#36]
Quote HistoryOriginally Posted By AZMAN42:
H2, its a Stock DD upper but as a left handed shooter I had to run a SLR adjustable gas block "the clone gods are crying" the gas was just way over the top, I run it suppressed 100% of the time, the gas is still there but its bearable. Noob question but am I responding to these questions correctly by just clicking Reply? Or quote. Ya the only reason I was asking is to make sure I am gtg as soon as the can is approved. |
|
|
|
|
Posted: 10/3/2015 4:56:13 PM EDT
[#37]
Quote HistoryOriginally Posted By dangerdan:
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
Than I'm gonna get killed in the streets mine is .08 lol |
|
|
|
|
Posted: 10/3/2015 4:56:56 PM EDT
[#38]
Quote HistoryOriginally Posted By AZMAN42:
H2, its a Stock DD upper but as a left handed shooter I had to run a SLR adjustable gas block "the clone gods are crying" the gas was just way over the top, I run it suppressed 100% of the time, the gas is still there but its bearable. Noob question but am I responding to these questions correctly by just clicking Reply? Click quote. Reply just posts it in response to nobody lol |
|
|
|
AZ, USA
|
Posted: 10/3/2015 5:00:06 PM EDT
[#39]
Quote HistoryOriginally Posted By MILSPEC556:
Click quote. Reply just posts it in response to nobody lol Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By AZMAN42:
H2, its a Stock DD upper but as a left handed shooter I had to run a SLR adjustable gas block "the clone gods are crying" the gas was just way over the top, I run it suppressed 100% of the time, the gas is still there but its bearable. Noob question but am I responding to these questions correctly by just clicking Reply? Click quote. Reply just posts it in response to nobody lol |
|
|
AZ, USA
|
Posted: 10/3/2015 5:03:02 PM EDT
[#40]
haha if your a right handed shooter Im sure you'll be ok..
Quote HistoryOriginally Posted By Patchgunner:
Than I'm gonna get killed in the streets mine is .08 lol Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By dangerdan:
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
Than I'm gonna get killed in the streets mine is .08 lol |
|
|
|
Posted: 10/3/2015 5:04:17 PM EDT
[#41]
I hate to say this but on my fsp mk18 build I may use a ba barrel
|
|
|
|
|
Posted: 10/3/2015 5:07:11 PM EDT
[Last Edit: MILSPEC556]
[#42]
Quote HistoryOriginally Posted By Patchgunner:
Than I'm gonna get killed in the streets mine is .08 lol Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By dangerdan:
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
Than I'm gonna get killed in the streets mine is .08 lol Nah dude you'll live. Just make sure you throw an H6 buffer in it then throw some fat chunks of lead in the rear of the buffer tube, then cross your fingers and twiddle your twinkle toes in hopes your gun will still cycle (which it won't because of the lead chunks)
I think an H2 or H3 with the can should get you decently set up, adjustable gas block would be optimal with the gaping port/can though |
|
|
|
|
Posted: 10/3/2015 5:13:27 PM EDT
[#43]
Quote HistoryOriginally Posted By MILSPEC556:
Nah dude you'll live. Just make sure you throw an H6 buffer in it then throw some fat chunks of lead in the rear of the buffer tube, then cross your fingers and twiddle your twinkle toes in hopes your gun will still cycle (which it won't because of the lead chunks)
I think an H2 or H3 with the can should get you decently set up, adjustable gas block would be optimal with the gaping port/can though Quote HistoryOriginally Posted By MILSPEC556:
Originally Posted By Patchgunner:
Originally Posted By dangerdan:
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
Than I'm gonna get killed in the streets mine is .08 lol Nah dude you'll live. Just make sure you throw an H6 buffer in it then throw some fat chunks of lead in the rear of the buffer tube, then cross your fingers and twiddle your twinkle toes in hopes your gun will still cycle (which it won't because of the lead chunks)
I think an H2 or H3 with the can should get you decently set up, adjustable gas block would be optimal with the gaping port/can though Don't worry I use fireclean the lav said I'll be fine |
|
|
|
|
Posted: 10/3/2015 5:17:34 PM EDT
[#44]
Quote HistoryOriginally Posted By Patchgunner:
Don't worry I use fireclean the lav said I'll be fine Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By MILSPEC556:
Originally Posted By Patchgunner:
Originally Posted By dangerdan:
Here we go with the "if your gas port ins't the same as the military's, your gun will fail" argument...
Than I'm gonna get killed in the streets mine is .08 lol Nah dude you'll live. Just make sure you throw an H6 buffer in it then throw some fat chunks of lead in the rear of the buffer tube, then cross your fingers and twiddle your twinkle toes in hopes your gun will still cycle (which it won't because of the lead chunks)
I think an H2 or H3 with the can should get you decently set up, adjustable gas block would be optimal with the gaping port/can though Don't worry I use fireclean the lav said I'll be fine 
But....but....but.....SS runes! It's not vegetables!!!! (I promise even though I'm sponsored by fireclean) 
|
|
|
|
|
Posted: 10/3/2015 5:21:03 PM EDT
[#45]
Quote HistoryOriginally Posted By Patchgunner:
That paint makes me horny Quote HistoryOriginally Posted By Patchgunner:
Originally Posted By Finslayer83:
<a href="https://flic.kr/p/zmziZU" target="_blank">https://farm1.staticflickr.com/583/21892602506_b419653332_k.jpg</a>DSC_6725 by The Dorsal Fin, on Flickr kinda there....but betterThat paint makes me horny Seriously! Well done Fin! |
|
|
|
|
Posted: 10/3/2015 5:23:06 PM EDT
[#46]
Quote HistoryOriginally Posted By AZMAN42:
Yupp! that was me
i have been a lurker on these forums for years, haha just now jumping into the forum game Welcome to the party! There have been a number of good new additions to this thread, I must say. Glad people are coming out of the woodwork. |
|
|
|
|
Posted: 10/3/2015 5:24:12 PM EDT
[Last Edit: Patchgunner]
[#47]
Honestly all I need is the length of the fsp cut for my project
Gonna use a basic end mill and chamfer the edges with it after pretty basic shit really will prob take 10 min lol. 1000 rpm I'll keep tooling simple and use a rough/ finish end mill. Will leave an acceptable finish. Gonna use a manual for this |
|
|
|
USA
|
Posted: 10/3/2015 5:24:52 PM EDT
[#48]
I'm thinking of running an H3 with my DD barrel, but it runs suppressed and unsuppressed all day with an H2 and Federal Lake City 55 grain.
|
|
|
|
Posted: 10/3/2015 5:27:41 PM EDT
[#49]
Quote HistoryOriginally Posted By CloneDiseased:
I'm thinking of running an H3 with my DD barrel, but it runs suppressed and unsuppressed all day with an H2 and Federal Lake City 55 grain. Nonsense. You need to put 2 H6 buffers in your receiver extension riki fuckin' tik!
|
|
|
|
|
Posted: 10/3/2015 5:28:08 PM EDT
[#50]
Quote HistoryOriginally Posted By CloneDiseased:
I'm thinking of running an H3 with my DD barrel, but it runs suppressed and unsuppressed all day with an H2 and Federal Lake City 55 grain. I'm in process of loading several thousand 55 gr milspec based loads so I might order an h 2 and a h3 |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
