User Panel
User Panel
User Panel
USA
|
Posted: 6/1/2013 7:48:26 AM EDT
[#1]
Here is a PR that a friend had.
|
|
|
NC, USA
|
Posted: 6/1/2013 8:01:27 AM EDT
[#2]
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still.  Thanks gunnut003  and I agree, I think the A2X looks too long
|
|
|
|
Posted: 6/1/2013 12:37:53 PM EDT
[#3]
Originally Posted By Lepus:
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still. Thanks gunnut003 and I agree, I think the A2X looks too long I think I spun the NT4s one more rotation out than picture to be "Sure" they are over 16"+ but it does not look too bad with 3 peel washers. 
|
|
|
|
IN, USA
|
Posted: 6/1/2013 1:47:07 PM EDT
[#4]
Originally Posted By gunnut003:
Originally Posted By Lepus:
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still. Thanks gunnut003 and I agree, I think the A2X looks too long I think I spun the NT4s one more rotation out than picture to be "Sure" they are over 16"+ but it does not look too bad with 3 peel washers. http://imageshack.us/a/img11/7243/1001306x.jpg How mine is pinned, it's the photo from when I bought it, but it looks similar now after being repinned. 
|
|
|
NC, USA
|
Posted: 6/1/2013 2:59:36 PM EDT
[Last Edit: Lepus]
[#5]
Originally Posted By gunnut003:
Originally Posted By Lepus:
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still. Thanks gunnut003 and I agree, I think the A2X looks too long I think I spun the NT4s one more rotation out than picture to be "Sure" they are over 16"+ but it does not look too bad with 3 peel washers. http://imageshack.us/a/img11/7243/1001306x.jpg Doesn't look too bad?!?! That looks amazing. Will that still mount the NT4 suppressor?
|
|
|
WI, USA
|
Posted: 6/1/2013 4:07:37 PM EDT
[#6]
|
|
|
MT, USA
|
Posted: 6/2/2013 2:32:23 AM EDT
[#7]
Originally Posted By Lepus:
Originally Posted By gunnut003:
Originally Posted By Lepus:
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still. Thanks gunnut003 and I agree, I think the A2X looks too long I think I spun the NT4s one more rotation out than picture to be "Sure" they are over 16"+ but it does not look too bad with 3 peel washers. http://imageshack.us/a/img11/7243/1001306x.jpg Doesn't look too bad?!?! That looks amazing. Will that still mount the NT4 suppressor?I'm also interested in the response to this question. This is something I need to get done, and will be using it with an NT4. Would prefer to not have to send it off somewhere, but will if needed. |
|
|
|
Posted: 6/2/2013 3:43:33 AM EDT
[#8]
Originally Posted By FAB-10_Guy:
Originally Posted By Lepus:
Originally Posted By gunnut003:
Originally Posted By Lepus:
Originally Posted By gunnut003:
On my Block I, PR, and Block II, all three Colt 14.5s measure different lengths, but close to or slightly longer than 14.5. All NT4s are also different lengths so with tolerance stacking I can get 16 1/16" or ~16.04" with 2.75 to 3 peel washers stacked together. my no go stick is 16.02". And all combinations are longer than it. On 14.5" barrels with A2 or A1 flashhiders if you use a split washer or peel washer with a ~.25" jamb nut you get to 16"+ and the flashider does not look rediculously long on the end... Yes i know the A2X is only .25" longer, but still. Thanks gunnut003 and I agree, I think the A2X looks too long I think I spun the NT4s one more rotation out than picture to be "Sure" they are over 16"+ but it does not look too bad with 3 peel washers. http://imageshack.us/a/img11/7243/1001306x.jpg Doesn't look too bad?!?! That looks amazing. Will that still mount the NT4 suppressor?I'm also interested in the response to this question. This is something I need to get done, and will be using it with an NT4. Would prefer to not have to send it off somewhere, but will if needed. Using peel washers or a proper spacer is what KAC says to use for supressor mounting. Even though crushwashers are used in the .mil. For warranty purposes, using peel/ washer/shims/proper spacer is the best. Per Nefarious Arms (one KAC authorized place to make the spacers to bring the 14.5 + NT4 to 16") the spacer or stacking peel washers is fine for warranty purposes(something that provides even support all the way around the NT4). ADCO is also a good place, I would assume. With that said, I am using peel washers, but still am debating if I should have it pinned or if I should 1000* silver solder it?
|
|
|
|
CA, USA
|
Posted: 6/2/2013 8:11:44 AM EDT
[#9]
Statue depicting Matthew Axelson holding a Block I M4A1. I took this photo on Memorial Day, RIP. |
|
|
USA
|
Posted: 6/2/2013 8:24:22 AM EDT
[#10]
Originally Posted By patriot_man:
http://farm3.staticflickr.com/2889/8874628191_7b1b8ef08c_b.jpg Statue depicting Matthew Axelson holding a Block I M4A1. I took this photo on Memorial Day, RIP. Looks like a Mk18 Mod 0. |
|
|
|
Posted: 6/2/2013 8:43:49 AM EDT
[#11]
Wow this thread is only 5 pages.
 |
|
|
|
|
Posted: 6/2/2013 8:44:56 AM EDT
[#12]
Originally Posted By rbhoover: Let's see your guys M4 SOPMOD Clones, all are welcome here but this is mainly for the Block I and 1.5/PR clones. Block I http://i547.photobucket.com/albums/hh445/subieman02/Aa_Sopmodm4_zps1fc8bcdf.jpg http://i547.photobucket.com/albums/hh445/subieman02/SOPMOD_2-2005_zps7ce7b982.jpg Barrel: 14.5" M4 1/7 twist (M4 Profile or HB 'SOCOM' Profile) Flash Hider: Standard A2 or KAC NT4 Rail System: KAC M4 RIS/RAS Vertical grips KAC Rail panels: KAC Optics: Aimpoint Comp M/M2 in Wilcox Mount Trijicon ACOG TA01 NSN Trijicon RX01 IR/Visible Lasers: Insight PAQ-4 Insight AN/PEQ-2 Insight AN/PEQ-5 Visible Laser Flashlight: Surefire M951/M952 Rear sight: MaTech Buttstock: Colt Fiberlite Standard M4 SOPMOD Block 1.5/Phase Replacement (PR) Barrel: 14.5" M4 1/7 twist (M4 Profile or HB 'SOCOM' Profile) Flash Hider: Standard A2 or KAC NT4 Rail System: KAC M4 RIS/RAS Vertical grips: Tango down battle grip in tan KAC Grip-Pod Rail panels: Tango Down KAC Optics: Elcan Specter DR SU-230 EOTech SU-231-PEQ (EOTech 553) EOTech SU-231A-PEQ (EOTech EXPS03) ACOG SU-237 (TA01-ECOS) EOTech/Aimpoint 3x magnifiers IR Lasers: Insight AN/PEQ-15/LA-5 Flashlight: Insight M3 (SU-233/PVS) Insight WMX200 Rear sight: KAC 300m KAC 600m MaTech Buttstock: standard M4 SOPMOD Block II (borrowed from M4A1 SOPMOD Block II Thread) http://imageshack.us/a/img854/6118/blockii.jpg Barrel: 14.5" M4 1/7 twist (M4 Profile or HB 'SOCOM' Profile) Flash Hider: Standard A2, KAC NT4, Surefire SF4P (good luck purchasing!) Rail System: DD RIS II in dark earth Vertical grips Tango down battle grip in tan KAC Grip-Pod Rail panels: Tango Down KAC Front sight: KAC flip up in tan Optics: Elcan Specter DR SU-230 EOTech SU-231-PEQ (EOTech 553) EOTech SU-231A-PEQ (EOTech EXPS-3) ACOG SU-237 (TA01-ECOS) EOTech/Aimpoint 3x magnifiers IR Lasers: Insight AN/PEQ-15/LA-5 Flashlight: Insight M3 (SU-233/PVS) Insight WMX200 Surefire Scout M600 Rear sight: KAC 300m KAC 600m MaTech Buttstock: standard M4 SOPMOD Now some reference pictures: Here are mine! (Top) M4 SOPMOD (Block 1) (Middle) M4 SOPMOD (Phase Replacement) (Bottom) M4 SOPMOD Block II http://imageshack.us/a/img210/7697/img3719my.jpg Block I (M4 SOPMOD) http://imageshack.us/a/img6/7406/m4sopmod1.jpg http://imageshack.us/a/img585/5065/m4sopmod2.jpg http://imageshack.us/a/img546/3797/m4sopmod3.jpg http://imageshack.us/a/img839/576/m4sopmod4.jpg http://imageshack.us/a/img18/1056/m4sopmod5.jpg http://imageshack.us/a/img15/7036/m4sopmod72002.jpg http://imageshack.us/a/img441/2881/m4sopmod9.jpg http://imageshack.us/a/img594/4097/m4sopmod10.jpg http://imageshack.us/a/img189/466/m4sopmod11.jpg http://imageshack.us/a/img546/6194/m4sopmod12.jpg http://imageshack.us/a/img843/3170/m4sopmod13.jpg http://imageshack.us/a/img842/4240/m4sopmod14.jpg http://imageshack.us/a/img834/5404/m4sopmod15.jpg http://imageshack.us/a/img59/7554/m4sopmod16.jpg Phased Replacement (Block 1.5) http://imageshack.us/a/img259/8739/m4cqbrblock151.jpg http://imageshack.us/a/img547/845/m4cqbrblock152.jpg http://imageshack.us/a/img843/7130/m4cqbrblock153.jpg http://imageshack.us/a/img203/7914/m4cqbrblock154.jpg http://imageshack.us/a/img844/6268/m4cqbrblock155.jpg http://imageshack.us/a/img823/7342/m4cqbrblock156.jpg http://imageshack.us/a/img69/2861/m4cqbrblock157.jpg http://imageshack.us/a/img607/6678/m4cqbrblock158.jpg http://imageshack.us/a/img689/8275/m4cqbrblock159.jpg Very nice PR and Block II OP.  |
|
|
|
|
Posted: 6/2/2013 8:52:30 AM EDT
[#13]
Originally Posted By Lancelot: We'll discuss this and see if we'll let this run. We now have an M4 thread, an issued M4 thread, an AFSOC M4 thread, and the Block II thread. How many M4 threads do we need? Stupid clone threads. http://farm9.staticflickr.com/8542/8644238454_263aea98d1_b.jpg http://farm9.staticflickr.com/8263/8644238960_e15106f886_b.jpg http://farm9.staticflickr.com/8084/8355572780_120a9a6b70_b.jpg We need them all.  |
|
|
|
WI, USA
|
Posted: 6/2/2013 7:58:34 PM EDT
[#14]
Originally Posted By patriot_man:
http://farm3.staticflickr.com/2889/8874628191_7b1b8ef08c_b.jpg Statue depicting Matthew Axelson holding a Block I M4A1. I took this photo on Memorial Day, RIP. I wish we had statues like that around here! |
|
|
CA, USA
|
Posted: 6/2/2013 9:20:09 PM EDT
[#15]
Originally Posted By cmcflex:
Originally Posted By patriot_man:
http://farm3.staticflickr.com/2889/8874628191_7b1b8ef08c_b.jpg Statue depicting Matthew Axelson holding a Block I M4A1. I took this photo on Memorial Day, RIP. Looks like a Mk18 Mod 0. Whoops thanks for pointing that out. I was half asleep when I posted it. I guess it'll find a place in the Mk18 thread as well.
|
|
|
FL, USA
|
Posted: 6/2/2013 10:25:46 PM EDT
[#16]
Is the ECOS-N still the Comp M2, or did it get upgraded to the Comp M4, similar to how the M68 CCO went from being the Comp M2 to the Comp M4?
|
|
|
IN, USA
|
Posted: 6/2/2013 10:58:56 PM EDT
[#17]
Originally Posted By mercdank:
Is the ECOS-N still the Comp M2, or did it get upgraded to the Comp M4, similar to how the M68 CCO went from being the Comp M2 to the Comp M4? ECOS-N was replaced by the SU-231, and SU-231A. |
|
|
TX, USA
|
Posted: 6/2/2013 11:05:38 PM EDT
[#18]
Very nice PR and Block II OP. [div] The early MWS is nice too.. 
|
|
|
|
Posted: 6/3/2013 2:50:03 AM EDT
[Last Edit: jukeboxx13]
[#19]
PR's from Block II thread
    |
|
|
|
FL, USA
|
Posted: 6/3/2013 8:11:15 AM EDT
[#20]
Originally Posted By Tmender03:
Originally Posted By mercdank:
Is the ECOS-N still the Comp M2, or did it get upgraded to the Comp M4, similar to how the M68 CCO went from being the Comp M2 to the Comp M4? ECOS-N was replaced by the SU-231, and SU-231A. Gotcha, thanks. |
|
|
PA, USA
|
Posted: 6/4/2013 5:24:36 PM EDT
[Last Edit: barny]
[#21]
Order a KAC carbine rail off the EE and a CAR stock. I got a BCM SOCOM upper awhile back guess I should finish it. Only problem is the 16" bbl
|
|
|
|
Posted: 6/4/2013 6:30:46 PM EDT
[#22]
Originally Posted By barny: Order a KAC carbine rail off the EE and a CAR stock. I got a BCM SOCOM upper awhile back guess I should finish it. Only problem is the 16" bbl 16 inch is close enough imo, but you could just cut it. |
|
|
|
PA, USA
|
Posted: 6/4/2013 6:41:16 PM EDT
[#23]
Originally Posted By jukeboxx13:
Originally Posted By barny:
Order a KAC carbine rail off the EE and a CAR stock. I got a BCM SOCOM upper awhile back guess I should finish it. Only problem is the 16" bbl 16 inch is close enough imo, but you could just cut it. My Blk II has a 14.5 SOCOM upper. I was thinking of getting it the 16"cut down Oh and it will be painted |
|
|
|
Posted: 6/5/2013 6:10:02 PM EDT
[#24]
PR project in the works. ACOG normally resides on another rifle, as I'm still deciding on optic for this guy.. prob a 553 in FDE. Elcan is out of the budget for the time being. Wish I'd tried the KAC 300m rear sight a long time ago, as it is definitely my favorite (over Troy, Magpul, KAC 200-600m). I want to paint it, but I need to practice on some magazines first.
|
|
|
|
NC, USA
|
Posted: 6/5/2013 7:02:36 PM EDT
[#25]
Originally Posted By Rothbard:
PR project in the works. ACOG normally resides on another rifle, as I'm still deciding on optic for this guy.. prob a 553 in FDE. Elcan is out of the budget for the time being. Wish I'd tried the KAC 300m rear sight a long time ago, as it is definitely my favorite (over Troy, Magpul, KAC 200-600m). I want to paint it, but I need to practice on some magazines first. <a href="http://s1252.photobucket.com/user/82ndDoc/media/IMG_0614_zps575fe512.jpg.html" target="_blank">http://i1252.photobucket.com/albums/hh564/82ndDoc/IMG_0614_zps575fe512.jpg</a> <a href="http://s1252.photobucket.com/user/82ndDoc/media/IMG_0615_zpsf6317f19.jpg.html" target="_blank">http://i1252.photobucket.com/albums/hh564/82ndDoc/IMG_0615_zpsf6317f19.jpg</a> <a href="http://s1252.photobucket.com/user/82ndDoc/media/IMG_0613_zps85e933d4.jpg.html" target="_blank">http://i1252.photobucket.com/albums/hh564/82ndDoc/IMG_0613_zps85e933d4.jpg</a> Very nice
|
|
|
WI, USA
|
Posted: 6/5/2013 7:13:01 PM EDT
[Last Edit: MandPdude]
[#26]
|
|
|
|
Posted: 6/14/2013 4:13:46 PM EDT
[#27]
|
|
|
|
MT, USA
|
Posted: 6/19/2013 4:06:17 PM EDT
[#28]
Look what followed me home from Walmart last night! Dressed it up just a bit for the pictures
|
|
|
TX, USA
|
Posted: 6/19/2013 7:43:21 PM EDT
[Last Edit: Lancelot]
[#29]
deleted by moderator
 |
|
|
|
Posted: 6/21/2013 4:18:23 PM EDT
[Last Edit: Lancelot]
[#30]
Im looking to build a Block 1 GLSSC carbine with an Acog.
I will contribute to this thread if we can make it happen haha! Edit: I have acquired a Colt 6921 upper for my build. Need a RAS and an Acog. I will keep it updated. |
|
|
|
PA, USA
|
Posted: 6/25/2013 2:57:44 PM EDT
[Last Edit: barny]
[#31]
BCM SOCOM upper KAC M4 rail EOtech 552 PSA lower |
|
|
|
Posted: 6/25/2013 3:01:04 PM EDT
[#32]
Originally Posted By barny:
http://i1292.photobucket.com/albums/b577/FA_MG/null_zps8a8e39b1.jpghttp://i1292.photobucket.com/albums/b577/FA_MG/null_zps8a8e39b1.jpg BCM SOCOM upper KAC M4 rail EOtech 552 PSA lower Looks good man! Dust it with some brown or green paint to darken it up a bit and then wear it in. |
|
|
|
PA, USA
|
Posted: 6/25/2013 3:09:34 PM EDT
[#33]
Originally Posted By Socomike:
Originally Posted By barny:
http://i1292.photobucket.com/albums/b577/FA_MG/null_zps8a8e39b1.jpghttp://i1292.photobucket.com/albums/b577/FA_MG/null_zps8a8e39b1.jpg BCM SOCOM upper KAC M4 rail EOtech 552 PSA lower Looks good man! Dust it with some brown or green paint to darken it up a bit and then wear it in. Yeah about that, my That carbine got a low pro gas block and a 15" rail yesterday
|
|
|
|
Posted: 6/25/2013 4:27:50 PM EDT
[#34]
Here is my Colt SOCOM-
I plan to take off all of the Magpul stuff along with the Troy rear sight and replace them with the OG parts. Also I may have ADCO cut down the barrel to 14.5". |
|
|
|
|
Posted: 6/26/2013 5:19:07 PM EDT
[Last Edit: Rothbard]
[#35]
Added the FDE stock and removed the sling swivel, waiting on my EOtech 553 to arrive... that optic is scarce right now, especially if you don't want to pay $700 for it. I continue to be impressed with how accurate this rifle is.
|
|
|
|
|
Posted: 6/28/2013 1:35:13 PM EDT
[#36]
Let's keep this thread alive. Kthnxbai
 |
|
|
|
MI, USA
|
Posted: 6/28/2013 8:26:38 PM EDT
[Last Edit: usmc_0311_0933]
[#37]
Been lurking here for a long time now, figured I should finally contribute. Sorry for the crappy cell pics
My Block I standard S&W M&P15X with LMT sopmod stock and aimpoint comp2 with arms throw lever mount 
My Block 1.5 Spikes lower, cmmg lower parts kit, KAC rail, Fulton Armory 16" M4 "the look" barrel(16" barrel with flash suppressor recessed over the barrel & taper pinned on to give appearance of M4 profile) DEZ Arms screw on A2 front sight base, ergo grip FDE, ergo rail ladders FDE, LMT sopmod stock FDE, eotech 553 tan, tango down vertical grip FDE, M3X long gun push button tan, insight dual remote tan, ATPIAL Training Visible Laser ATP-000-A18VIS in FDE 
|
|
|
|
Posted: 7/4/2013 10:57:13 AM EDT
[#38]
|
|
|
|
TX, USA
|
Posted: 7/4/2013 11:42:18 AM EDT
[Last Edit: Forest]
[#39]
post removed, warning sent. -F |
|
|
USA
|
Posted: 7/4/2013 2:18:09 PM EDT
[Last Edit: Forest]
[#40]
don't quote the stupid - F |
|
|
USA
|
Posted: 7/4/2013 2:33:24 PM EDT
[Last Edit: Shay_Ellafrits]
[#41]
Originally Posted By USP45Tim:
Let's keep this thread alive. Kthnxbai http://i58.photobucket.com/albums/g255/deputythrust/Weapons/IMG_4836_zpsa813d9ea.jpg Nice lookin rifle ya got there |
|
|
|
Posted: 7/4/2013 2:34:43 PM EDT
[Last Edit: Forest]
[#42]
Play nice.
|
|
|
|
|
Posted: 7/4/2013 3:49:52 PM EDT
[#43]
Originally Posted By TREETOP:
http://i973.photobucket.com/albums/ae218/treetopper/B3C71341-C389-46A3-8D0A-87E34175C1D3-1058-000001005BCFBB27_zps2c8768f6.jpg Shes a beaut! |
|
|
|
|
Posted: 7/4/2013 4:11:04 PM EDT
[#44]
Dangit what'd I miss!
|
|
|
|
|
Posted: 7/4/2013 4:19:58 PM EDT
[#45]
Someone mistook this for the EE...
Then the Clone threads self proclaimed moderator came to save the day... Then an actual moderator took care of the problem(s)! |
|
|
|
|
Posted: 7/4/2013 6:19:04 PM EDT
[#46]
Thanks! Took the MOE off today in favor of the traditional M4 stock. You can't go wrong either way.
Originally Posted By Shay_Ellafrits: Originally Posted By USP45Tim: Let's keep this thread alive. Kthnxbai http://i58.photobucket.com/albums/g255/deputythrust/Weapons/IMG_4836_zpsa813d9ea.jpg Nice lookin rifle ya got there |
|
|
|
|
Posted: 7/4/2013 8:44:51 PM EDT
[#47]
Sorry for the crappy cell pics....
Here's my mostly block 1 
Colt RO921HB upper with pinned and welded A2X RAS Trijicon TA01NSN with Larue mount LRB lower with CMMG 2-stage trigger Magpul CTR, MIAD, and trigger guard Troy DOA BUIS IR laser The PR 
LMT 14.5" M4 upper with pinned and welded AAC 18T mount Knights RAS Eotech SU-231A Troy FDE BUIS Vltor mod stock Tango Down forward grip and rail covers Surefire 952V on Travis Haley offset mount OTAL IR laser Spikes lower with Geissele SD3G The Block II FSP 
Colt RO921HB upper with Knights mount pinned and welded Daniel Defense RIS II FSP Surefire 952V IR laser Eotech SU-231A Matech BUIS Vltor enhanced club foot Tango Down forward grip and rail covers DPMS lower with Geissele S3G trigger The Block II 
Colt RO921 with pinned and welded AAC 18T mount Daniel Defense RIS II Surefire 952V Tango Down rail covers and Larue forward grip Troy front and rear sights Trijicon TA31RCO-M4P with Larue mount Vltor mod stock Spikes lower with Geissele SSA-E trigger |
|
|
|
VA, USA
|
Posted: 7/5/2013 1:33:19 PM EDT
[#48]
I miss my elcan... 
|
|
|
|
Posted: 7/10/2013 6:40:10 PM EDT
[#49]
Still waiting on the EOtech 553...
Couple of coats of paint and a couple hundred rounds later: 
|
|
|
|
WI, USA
|
Posted: 7/12/2013 11:25:09 AM EDT
[#50]
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
