User Panel
[#1]
Originally Posted By Combat_Diver:
Since I have no idea what the round count would be any way, but if I did I would inspect and replace at 10K as recommended. Gauge the parts and replace when out of spec. Every time I do a Technical Inspection a team figure 12 guys, 12ea M4A1s with 14.5" and then 12 ea 10.3" uppers. Then you add the pistols, sniper rifles, machine guns, 40mm Mk 47s, 84mm M3s etc. CD View Quote View All Quotes View All Quotes Originally Posted By Combat_Diver:
Originally Posted By joglee:
Originally Posted By SecretSquirell:
Originally Posted By Combat_Diver:
Posted this under the Mk18 thread but it applies to the M4 series also. Checking into the Mk18 Technical Repair Standard (Sep 12) that table been changed to 10,000 rd for barrel and bolt life instead of 6,000 (M4A1 TRS dated Jun 06). Here's the Mandatory Maintenance Schedule. http://www.hunt101.com/data/500/IMG_0330_rz.jpg http://www.hunt101.com/data/500/IMG_0332_rz.jpg http://www.hunt101.com/data/500/IMG_0333_rz.jpg CD I see it says to replace all the bolt related parts at 10k, 15, 30.......... Why would you replace the bolt 5k rounds after the 10k replacement, then jump to a 15k replacement interval? It's just the way the data is setup. They could have left it blank after 10k, but instead put an R, cause if you notice other things say I and R in the 15k+ categories. Since I have no idea what the round count would be any way, but if I did I would inspect and replace at 10K as recommended. Gauge the parts and replace when out of spec. Every time I do a Technical Inspection a team figure 12 guys, 12ea M4A1s with 14.5" and then 12 ea 10.3" uppers. Then you add the pistols, sniper rifles, machine guns, 40mm Mk 47s, 84mm M3s etc. CD I'm glad you're a member of this forum. Just wanted to put that out there. I found a rail mounting bayonet BTW. it looks like shit and of course isnt mil-spec or anything like that, but found one nonetheless. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#2]
Glitch bump.
(Sorry G-man) |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#3]
Final glitch bump/placeholder.
Almost to pg. 1,000 boys!! |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#4]
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[#5]
Mine doesn't say "Front Sight Here" on the front of my rail....
Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD View Quote |
|
|
[#6]
Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... View Quote View All Quotes View All Quotes Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD For real? Mine does... |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#7]
My MK18 RIS doesn't...my M4A1 is a FSP, so of course it wouldn't
Originally Posted By MILSPEC556:
For real? Mine does... View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD For real? Mine does... |
|
|
[#8]
Originally Posted By OilfieldTrash78:
My MK18 RIS doesn't...my M4A1 is a FSP, so of course it wouldn't View Quote View All Quotes View All Quotes Originally Posted By OilfieldTrash78:
My MK18 RIS doesn't...my M4A1 is a FSP, so of course it wouldn't Originally Posted By MILSPEC556:
Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD For real? Mine does... Oh alright. Yea im not sure if the mk 18 ris II's say it or not, but id have to guess no if I had to guess lol |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#9]
Originally Posted By Combat_Diver:
Since I have no idea what the round count would be any way, but if I did I would inspect and replace at 10K as recommended. Gauge the parts and replace when out of spec. Every time I do a Technical Inspection a team figure 12 guys, 12ea M4A1s with 14.5" and then 12 ea 10.3" uppers. Then you add the pistols, sniper rifles, machine guns, 40mm Mk 47s, 84mm M3s etc. CD View Quote View All Quotes View All Quotes Originally Posted By Combat_Diver:
Originally Posted By joglee:
Originally Posted By SecretSquirell:
Originally Posted By Combat_Diver:
Posted this under the Mk18 thread but it applies to the M4 series also. Checking into the Mk18 Technical Repair Standard (Sep 12) that table been changed to 10,000 rd for barrel and bolt life instead of 6,000 (M4A1 TRS dated Jun 06). Here's the Mandatory Maintenance Schedule. http://www.hunt101.com/data/500/IMG_0330_rz.jpg http://www.hunt101.com/data/500/IMG_0332_rz.jpg http://www.hunt101.com/data/500/IMG_0333_rz.jpg CD I see it says to replace all the bolt related parts at 10k, 15, 30.......... Why would you replace the bolt 5k rounds after the 10k replacement, then jump to a 15k replacement interval? It's just the way the data is setup. They could have left it blank after 10k, but instead put an R, cause if you notice other things say I and R in the 15k+ categories. Since I have no idea what the round count would be any way, but if I did I would inspect and replace at 10K as recommended. Gauge the parts and replace when out of spec. Every time I do a Technical Inspection a team figure 12 guys, 12ea M4A1s with 14.5" and then 12 ea 10.3" uppers. Then you add the pistols, sniper rifles, machine guns, 40mm Mk 47s, 84mm M3s etc. CD Can you go into your process and tools used to inspect and gauge the parts? What types of things are you looking for, etc... |
|
|
[#10]
|
|
|
[#11]
Originally Posted By MILSPEC556:
Oh alright. Yea im not sure if the mk 18 ris II's say it or not, but id have to guess no if I had to guess lol View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By OilfieldTrash78:
My MK18 RIS doesn't...my M4A1 is a FSP, so of course it wouldn't Originally Posted By MILSPEC556:
Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD For real? Mine does... Oh alright. Yea im not sure if the mk 18 ris II's say it or not, but id have to guess no if I had to guess lol Check the Mk18 RIS II and they are not marked either. CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[Last Edit: Combat_Diver]
[#12]
Originally Posted By BurtSaun1049:
Can you go into your process and tools used to inspect and gauge the parts? What types of things are you looking for, etc... View Quote View All Quotes View All Quotes Originally Posted By BurtSaun1049:
Originally Posted By Combat_Diver:
Originally Posted By joglee:
Originally Posted By SecretSquirell:
Originally Posted By Combat_Diver:
Posted this under the Mk18 thread but it applies to the M4 series also. Checking into the Mk18 Technical Repair Standard (Sep 12) that table been changed to 10,000 rd for barrel and bolt life instead of 6,000 (M4A1 TRS dated Jun 06). Here's the Mandatory Maintenance Schedule. http://www.hunt101.com/data/500/IMG_0330_rz.jpg http://www.hunt101.com/data/500/IMG_0332_rz.jpg http://www.hunt101.com/data/500/IMG_0333_rz.jpg CD I see it says to replace all the bolt related parts at 10k, 15, 30.......... Why would you replace the bolt 5k rounds after the 10k replacement, then jump to a 15k replacement interval? It's just the way the data is setup. They could have left it blank after 10k, but instead put an R, cause if you notice other things say I and R in the 15k+ categories. Since I have no idea what the round count would be any way, but if I did I would inspect and replace at 10K as recommended. Gauge the parts and replace when out of spec. Every time I do a Technical Inspection a team figure 12 guys, 12ea M4A1s with 14.5" and then 12 ea 10.3" uppers. Then you add the pistols, sniper rifles, machine guns, 40mm Mk 47s, 84mm M3s etc. CD Can you go into your process and tools used to inspect and gauge the parts? What types of things are you looking for, etc... On a M16 series here's my steps Clear gun (If I'm visiting a team house, they are usually all loaded in the ready room) Insert Bore Erosion gauge into chamber (picture borrowed from here) Insert No Go gauge into chamber and close bolt Check Bolt Carrier Gas Key for tightness and staking Check Bolt for cracks/broken lugs, check gas rings Check Firing Pin Protrusion if noted misfiring Check FH for tightness. Replace KAC QDSS FH (NT4) with SF FMBSC FH (FH556RC) if requested Check KAC RIS or DD RIS II for tightness, missing screws Over all inspection of upper receiver Inspection of lower receiver Check trigger pull weight (if I brought my weights with me) Install Geissele SSF trigger if requested Inspection of castle nut on receiver extension, stake if needed Correct any other noted deficiencies. Reassemble and preform functions check Load gun back in configuration I found it. Note all deficiencies on 2404 Move on to next CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[#13]
|
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[#14]
Originally Posted By Combat_Diver:
And for shits and giggles...... http://www.hunt101.com/data/500/medium/M4_SOPMOD.jpg CD View Quote Yes it is! |
|
|
[#15]
Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD View Quote If you have some time CD...there was some discussion earlier about .mil markings on the RISII. I can't find the exact one but this> http://www.ar15.com/forums/t_7_159/1390554_.html has a pic and I see your replacement parts have the part number. Mine does not and came in a white box like the link. Do you have any input on the oddity. Thank you. And thanks to your family too.! |
|
|
[#16]
Originally Posted By OilfieldTrash78: Mine doesn't say "Front Sight Here" on the front of my rail.... View Quote View All Quotes View All Quotes Originally Posted By OilfieldTrash78: Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver: Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD I have one that was bought plastic, no box, with 2008 markings (I'm assuming military over-stock) and two that were retail, all of of them say "front sight here". |
|
|
[#17]
Originally Posted By Roadblock:
I have one that was bought plastic, no box, with 2008 markings (I'm assuming military over-stock) and two that were retail, all of of them say "front sight here". View Quote View All Quotes View All Quotes Originally Posted By Roadblock:
Originally Posted By OilfieldTrash78:
Mine doesn't say "Front Sight Here" on the front of my rail.... Originally Posted By Combat_Diver:
Don't think I posted these here (did in the Mk18 thread) http://www.hunt101.com/data/500/IMG_0260_rz.jpg http://www.hunt101.com/data/500/IMG_0259_rz.jpg http://www.hunt101.com/data/500/IMG_0258_rz.jpg CD I have one that was bought plastic, no box, with 2008 markings (I'm assuming military over-stock) and two that were retail, all of of them say "front sight here". Mine is marked 2011, and has it. I wonder if we can find a method to the madness.i'm also wondering if this thread is going to spontaniously combust at pg. 1,000 |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#18]
Gents
The DD RIS II's that I have don't have a box. They are in foil packs as the picture shown. (course they could have been removed from boxes in Afghanistan) Both my stocks here and in Astan where that way. I'll check in the morning as its almost 11pm right now. CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[#19]
Originally Posted By Combat_Diver:
Gents The DD RIS II's that I have don't have a box. They are in foil packs as the picture shown. (course they could have been removed from boxes in Afghanistan) Both my stocks here and in Astan where that way. I'll check in the morning as its almost 11pm right now. CD View Quote My 2011 markings are on the rail itself, the full length RIS II in your pic is marked 2014 |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#20]
Originally Posted By MILSPEC556:
My 2011 markings are on the rail itself, the full length RIS II in your pic is marked 2014 View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By Combat_Diver:
Gents The DD RIS II's that I have don't have a box. They are in foil packs as the picture shown. (course they could have been removed from boxes in Afghanistan) Both my stocks here and in Astan where that way. I'll check in the morning as its almost 11pm right now. CD My 2011 markings are on the rail itself, the full length RIS II in your pic is marked 2014 Got couple more still unwrapped. Later going to bed now. You guys have a great day. CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09' Afganistan: 09,10,11', & 14' |
[#21]
Originally Posted By Combat_Diver:
Got couple more still unwrapped. Later going to bed now. You guys have a great day. CD View Quote View All Quotes View All Quotes Originally Posted By Combat_Diver:
Originally Posted By MILSPEC556:
Originally Posted By Combat_Diver:
Gents The DD RIS II's that I have don't have a box. They are in foil packs as the picture shown. (course they could have been removed from boxes in Afghanistan) Both my stocks here and in Astan where that way. I'll check in the morning as its almost 11pm right now. CD My 2011 markings are on the rail itself, the full length RIS II in your pic is marked 2014 Got couple more still unwrapped. Later going to bed now. You guys have a great day. CD You too bro |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#22]
Originally Posted By Combat_Diver:
On a M16 series here's my steps Clear gun (If I'm visiting a team house, they are usually all loaded in the ready room) Insert Bore Erosion gauge into chamber (picture borrowed from here) http://i300.photobucket.com/albums/nn12/stevenbrowning/SANY2574.jpg Insert No Go gauge into chamber and close bolt http://shop.pacifictoolandgauge.com/images/categories/Go-&-no-Go-Gauge-COMP.png Check Bolt Carrier Gas Key for tightness and staking Check Bolt for cracks/broken lugs, check gas rings http://weaponsman.com/wp-content/uploads/2015/01/m4-m16_bolt_weak_spots.jpg Check Firing Pin Protrusion if noted misfiring http://www.bushmaster.com/images/catalog/Parts_Accessories/Gunsmithing/MMT-005.gif Check FH for tightness. Replace KAC QDSS FH (NT4) with SF FMBSC FH (FH556RC) if requested Check KAC RIS or DD RIS II for tightness, missing screws Over all inspection of upper receiver Inspection of lower receiver Check trigger pull weight (if I brought my weights with me) Install Geissele SSF trigger if requested Inspection of castle nut on receiver extension, stake if needed Correct any other noted deficiencies. Reassemble and preform functions check Load gun back in configuration I found it. Note all deficiencies on 2404 Move on to next CD View Quote View All Quotes View All Quotes Originally Posted By Combat_Diver:
Originally Posted By BurtSaun1049:
Can you go into your process and tools used to inspect and gauge the parts? What types of things are you looking for, etc... On a M16 series here's my steps Clear gun (If I'm visiting a team house, they are usually all loaded in the ready room) Insert Bore Erosion gauge into chamber (picture borrowed from here) http://i300.photobucket.com/albums/nn12/stevenbrowning/SANY2574.jpg Insert No Go gauge into chamber and close bolt http://shop.pacifictoolandgauge.com/images/categories/Go-&-no-Go-Gauge-COMP.png Check Bolt Carrier Gas Key for tightness and staking Check Bolt for cracks/broken lugs, check gas rings http://weaponsman.com/wp-content/uploads/2015/01/m4-m16_bolt_weak_spots.jpg Check Firing Pin Protrusion if noted misfiring http://www.bushmaster.com/images/catalog/Parts_Accessories/Gunsmithing/MMT-005.gif Check FH for tightness. Replace KAC QDSS FH (NT4) with SF FMBSC FH (FH556RC) if requested Check KAC RIS or DD RIS II for tightness, missing screws Over all inspection of upper receiver Inspection of lower receiver Check trigger pull weight (if I brought my weights with me) Install Geissele SSF trigger if requested Inspection of castle nut on receiver extension, stake if needed Correct any other noted deficiencies. Reassemble and preform functions check Load gun back in configuration I found it. Note all deficiencies on 2404 Move on to next CD Thanks brother. |
|
|
[#23]
Get ready for pic dump!!
|
|
|
[#24]
Originally Posted By coctailer:
Get ready for pic dump!! View Quote I'll be ready tomorrow! Have another peice of the puzzle coming. Whoever gets page ownage better fucking own that shit. *please don't get page ownage right now, please don't get page ownage right now please don't get page ownage right now* |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[#25]
Is it time yet?
|
|
|
[#26]
|
|
"They are not men, they are weapons."
It's not me, it's the BRD talking. |
[#27]
|
|
|
[#29]
Reserved for tomorrow's taupe-ery
|
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[Last Edit: AR15USA]
[#30]
|
|
|
[Last Edit: WUPHF]
[#31]
|
|
"Adding a piston to an AR is like nailing more legs to a dog and calling it an octopus." - Chapman
|
[Last Edit: ragincajun1919]
[#32]
|
|
King of the Muskets
|
[#33]
|
|
You said
All this time that you would die for me. Then why? Are you so suprised, when you hear your own Eulogy?" |
[Last Edit: BamaTim]
[#34]
|
|
|
[Last Edit: gaston4]
[#35]
|
|
|
[Last Edit: G_MAN]
[#36]
|
|
|
[Last Edit: DocBach]
[#37]
|
|
"Bro, you need to turn your ACOG off before the batteries die." - PMI Instructor: subject matter expert
|
[#38]
Page 1000!
|
|
|
[#39]
Originally Posted By AR-Ryan21:
http://i1152.photobucket.com/albums/p500/AR-Ryan21/5C8F2F2E-847E-4041-A38A-643283957DE8_zpspcmfkpha.jpg View Quote How do you like the TA01ECOS? Right now I'm debating whether to get a Eotech/magnifier or the ACOG. |
|
|
[#40]
Lol you guys are so corny with reserving on page 1000.
Props to some of the proper clones. These rifles look great. |
|
|
[#41]
reserved
|
|
|
[#42]
|
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
If it aint a clone or the gun being cloned, it aint shit. |
[Last Edit: NateDS2K]
[#44]
|
|
|
[#45]
Originally Posted By sdrake100:
How do you like the TA01ECOS? Right now I'm debating whether to get a Eotech/magnifier or the ACOG. View Quote View All Quotes View All Quotes Originally Posted By sdrake100:
Originally Posted By AR-Ryan21:
http://i1152.photobucket.com/albums/p500/AR-Ryan21/5C8F2F2E-847E-4041-A38A-643283957DE8_zpspcmfkpha.jpg How do you like the TA01ECOS? Right now I'm debating whether to get a Eotech/magnifier or the ACOG. Went the eotech/magnifier route and after using a friends TA01ECOS I regret not going that route originally. The Eotech/G33 will likely move over to the CQBR once it is finished and I will begin the search for a TA01ECOS for the block II. |
|
|
[#46]
|
|
|
[#47]
Originally Posted By BePhreed:
I'm still a bigger Block I/1.5 fan. <a href="http://s737.photobucket.com/user/Bephreed/media/20131220_000547_zpsfcwnevpa.jpg.html" target="_blank">http://i737.photobucket.com/albums/xx11/Bephreed/20131220_000547_zpsfcwnevpa.jpg</a> <a href="http://s737.photobucket.com/user/Bephreed/media/Mobile%20Uploads/30CD97F4-2EE5-452E-8A3C-86A094423B6C_zpsp027qlmc.jpg.html" target="_blank">http://i737.photobucket.com/albums/xx11/Bephreed/Mobile%20Uploads/30CD97F4-2EE5-452E-8A3C-86A094423B6C_zpsp027qlmc.jpg</a> View Quote Finally some toes! Shees! Nice toys by them toes. |
|
|
[#48]
Originally Posted By NateDS2K:
Went the eotech/magnifier route and after using a friends TA01ECOS I regret not going that route originally. The Eotech/G33 will likely move over to the CQBR once it is finished and I will begin the search for a TA01ECOS for the block II. View Quote View All Quotes View All Quotes Originally Posted By NateDS2K:
Originally Posted By sdrake100:
Originally Posted By AR-Ryan21:
http://i1152.photobucket.com/albums/p500/AR-Ryan21/5C8F2F2E-847E-4041-A38A-643283957DE8_zpspcmfkpha.jpg How do you like the TA01ECOS? Right now I'm debating whether to get a Eotech/magnifier or the ACOG. Went the eotech/magnifier route and after using a friends TA01ECOS I regret not going that route originally. The Eotech/G33 will likely move over to the CQBR once it is finished and I will begin the search for a TA01ECOS for the block II. I really like the ECOS, but just can't get comfortable with the eye relief (or lack thereof). I'll be selling that ECOS if either of you are interested. Was just purchased brand new from DSG last month. |
|
"They are not men, they are weapons."
It's not me, it's the BRD talking. |
[#49]
Place holder
|
|
|
[#50]
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.