User Panel
Originally Posted By RTUtah:
https://www.AR15.Com/media/mediaFiles/111561/IMG_6561-410715.JPG View Quote |
|
|
Originally Posted By HaveBlue83:
never found out why. it grouped then dropped shots 3" low, and wandering zero issues. 2 days at the range, 60rnds of handloads....veey frustrating. i wasnt a fan of the way you mount or the procedure for tightening...that i did 2x and watched a youtube video on to make sure it wasnt me. i heard AFTER that some people i asked quietly had issues with them....SO i returned it immediately. i could also flex the optic in the mount by applying pressure to the optic....didnt like that. i know that Mark goes through the threads and i didnt wanna really say too much negative on it cause he would come hard. i bought mine during that $149 sale. loving my recce and NF combo tho :). the issues immediately stopped at the range when i went back to that setup. View Quote I've only had LT stuff for Aimpoints, they've been great in that application. My Mk 12 is rocking the Recce rail, I think that's the way to go for these. |
|
Don't come back to Afghanistan. -Taliban, 5/31/14
http://www.flickr.com/photos/46381179@N04/ |
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
i actually bought an aimpoint PRO in an lt150 mount and it was fINE. zeroed and shot it on my mk18 and M4. i swapped it for a wilcox even stevens for a mk12 member and personal buddy. no complaints with that. machining quality was good and they locked up fine.
i agree tho...the unitized PRI mount system is probably THE mk12 thing to have....kinda why im a pri guy actually! |
|
|
Originally Posted By Milla:
Kind of annoyed I got a little left and right play between the recivers. May need an accuwedge or something to tighten it up. It's weird because the lower fits nice and tight on my LMT upper with no play, and this MK12 upper fits tight on my other Stag lower nice and tight. Just this combo has some play in it. View Quote |
|
|
|
Originally Posted By aaron580:
Ooo looky what came in the mail! Too bad I really need the medium versions oh well, could build another Mod 1! https://i.imgur.com/eq5hNVj.jpg View Quote |
|
|
|
|
What was the purpose of them adding the lever stops? I'll be honest I never even noticed them on my issued MK12 Mod 1.
|
|
|
Originally Posted By Milla:
What was the purpose of them adding the lever stops? I'll be honest I never even noticed them on my issued MK12 Mod 1. View Quote There is actually 2 versions of the humps, one is MUCH easier to grind than the other, since it was just over molded. |
|
|
|
Originally Posted By aaron580:
Ooo looky what came in the mail! Too bad I really need the medium versions oh well, could build another Mod 1! https://i.imgur.com/eq5hNVj.jpg Anybody wanna trade a KAC FSGB for a arms 38 peq swan sleeve so I can build a Sam r? View Quote |
|
|
|
Originally Posted By aaron580: I did it myself on a set of mediums, was pretty proud of myself for using a dremel https://i.imgur.com/8L98B1i.jpg https://i.imgur.com/UJSlnPd.jpg View Quote Thanks for the pics and temptation! |
|
|
Strength Determination Merciless Forever
PA, USA
|
|
|
Originally Posted By tamboi: The firearms blog did a little article a couple of years ago. Phil Seberger was a bit off a genuis, even his methods of measuring the suppressors sound waves was innovative, so much so that the Aberdeen Proving grounds started using his methods. Utterly fantastic suppressor, so many people I know still can't believe how quiet and effective it is. View Quote I honestly don't know if there's any .223 subsonic ammo to be had which will cycle the action but I'd like to try that just to experience how quiet it would be. Shooting outdoors with no other loud noise sources in the area, I can shoot the AEM5 without hearing protection. |
|
Strange women lying in ponds, distributing swords, is no basis for a system of government.
|
Originally Posted By SDMF_Rebel:
Got the proper barrel today https://c1.staticflickr.com/5/4682/38632423855_edd1053d0b_b.jpg View Quote |
|
|
Originally Posted By SDMF_Rebel:
Got the proper barrel today https://c1.staticflickr.com/5/4682/38632423855_edd1053d0b_b.jpg View Quote Needs the long bottom rail to top it off |
|
|
|
Originally Posted By HaveBlue83:
https://s9.postimg.org/no9n1ygfz/Pain_Swallower.png this page is ouch to me View Quote |
|
|
Do any one know the LMT stock used on the MOD H? I already build a MK12 MOD1/H (Mk12 mod 1 upper with Mod H lower). Now I am working on my M4A1 Block II build and i am thinking can i just change a LMT stock and use same lower........
|
|
|
Originally Posted By WTFShane: Is it the A2 stock or the modded lever stops? View Quote ***** PS my pm thing was yellow.....i JUST SAW your pm. i liked the old style PM. i never look innthat corner. i had 3 missed pms..m2 about lever stops! u prolly think i curved ya lol sdmf lookin pretty! |
|
|
Originally Posted By Mason308:
Do any one know the LMT stock used on the MOD H? I already build a MK12 MOD1/H (Mk12 mod 1 upper with Mod H lower). Now I am working on my M4A1 Block II build and i am thinking can i just change a LMT stock and use same lower........ View Quote |
|
|
Originally Posted By HaveBlue83:
the lever stops. as a machinist im..mmore nit picky i guess. ***** PS my pm thing was yellow.....i JUST SAW your pm. i liked the old style PM. i never look innthat corner. i had 3 missed pms..m2 about lever stops! u prolly think i curved ya lol sdmf lookin pretty! View Quote |
|
|
I am always surprised when I wake up with a hangover, and am still able to log in
|
Originally Posted By Engel12626:
Got that call I've been waiting for. Took exactly 5 months. https://i.imgur.com/tGXMOSn.jpg View Quote It's too damn cold to go outside and shoot, so I just got it out to look at lol. Where is everyone putting the pressure switch for the PEQ-2A? I'm not really finding a comfortable spot... |
|
|
Kinda wonder what optics SF users would be using/experimenting with had the Mk12 remained in service...
I'm seriously considering throwing a Vortex Razor HD Gen II 3-18x50 on my Mod 1 and transferring the TS30A2 to my future Holland build. I love the TS30A2, but my Mod 1 is so accurate I'd love to take it out further - could always use more magnification. Plus, I've seen a number of SF guys running Vortex Razor Gen II optics on their Mk17s and/or M4A1s that I feel like if the Mk12 was still around we'd see somebody using one or these optics... |
|
|
Originally Posted By sbye:
Awesome! Individual? It's too damn cold to go outside and shoot, so I just got it out to look at lol. https://www.AR15.Com/media/mediaFiles/260726/20180106_172313-412785.jpg View Quote View All Quotes View All Quotes Originally Posted By sbye:
Originally Posted By Engel12626:
Got that call I've been waiting for. Took exactly 5 months. https://i.imgur.com/tGXMOSn.jpg It's too damn cold to go outside and shoot, so I just got it out to look at lol. https://www.AR15.Com/media/mediaFiles/260726/20180106_172313-412785.jpg |
|
I am always surprised when I wake up with a hangover, and am still able to log in
|
Originally Posted By MirrorMirror: When I got mine I was very pleasantly surprised at how effective the AEM5 is. I can hear the action cycling while firing. I did not expect it to be THAT good. I honestly don't know if there's any .223 subsonic ammo to be had which will cycle the action but I'd like to try that just to experience how quiet it would be. Shooting outdoors with no other loud noise sources in the area, I can shoot the AEM5 without hearing protection. View Quote I hand load my own ammo so I'm going to try 3 grains of Titegroup under a 55gr. bullet for some subsonic loads. Brad |
|
|
Originally Posted By BMPRacing: The AEM5 suppressor has been by far the best purchase I have ever made. The 7 month wait was WAY worth it! I hand load my own ammo so I'm going to try 3 grains of Titegroup under a 55gr. bullet for some subsonic loads. Brad View Quote I hate racking each shot on an AR plus subsonic 223 rounds are tumbling at 100 or close to it. |
|
|
|
|
|
Originally Posted By CPDowning:
Question, I recently picked up a Leupold 3.5-10x40 M3 and am wondering if there is a kosher mk262 turret for it like there is for the 2.5-8x36? I know I can get some turrets form Leupold Custom shop or other custom manufactures but I wanted to check here and see if there was a "correct" one. Thanks Picture thread...Soon to be Mod1 https://i.imgur.com/hk3qCeD.jpg View Quote You might be able to see if Leupold can do a knob with 77gr SPR marking and in M3 |
|
|
Originally Posted By SDMF_Rebel:
Got the proper barrel today https://c1.staticflickr.com/5/4682/38632423855_edd1053d0b_b.jpg View Quote |
|
|
|
Originally Posted By WTFShane:
I finished my PRI 80% last night. I managed to cut my finger setting up the router, break an end mill on the first cut, and drilled the trigger and hammer pins offset. https://farm5.staticflickr.com/4632/24738863477_789f0f7721_z.jpg https://farm5.staticflickr.com/4723/38898598864_d9705173ac_z.jpg View Quote |
|
|
|
Originally Posted By WTFShane:
I finished my PRI 80% last night. I managed to cut my finger setting up the router, break an end mill on the first cut, and drilled the trigger and hammer pins offset. https://farm5.staticflickr.com/4632/24738863477_789f0f7721_z.jpg https://farm5.staticflickr.com/4723/38898598864_d9705173ac_z.jpg View Quote Originally Posted By chenault: That being said. Your MK12 is set up exactly how I like it. Looks fantastic!! View Quote |
|
PSALMS 144-1 Blessed be the Lord my strength, which teacheth my hands to warre, and my fingers to fight
|
View Quote |
|
PSALMS 144-1 Blessed be the Lord my strength, which teacheth my hands to warre, and my fingers to fight
|
|
|
Originally Posted By spermgewehr44:
https://s25.postimg.org/r4ez1sldr/IMG_20171225_132159_269.jpg https://s25.postimg.org/bvp1o0jzj/IMG_20180108_122101_469.jpg https://s25.postimg.org/6x1j9hvm7/20180109_013250.png View Quote |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
|
Originally Posted By RTUtah:
Dude, I'm SO fucking jealous that y'all have that landscape to shoot in, free-range. You have no fucking idea. East Coast sucks. View Quote View All Quotes View All Quotes Originally Posted By RTUtah:
Dude, I'm SO fucking jealous that y'all have that landscape to shoot in, free-range. You have no fucking idea. East Coast sucks. |
|
|
|
Also, somewhat unrelated...
Does anyone have pics of a Mk12 Mod 1 and an M40 A3 or A5 used together (Preferably an A3)? |
|
|
Originally Posted By USMCSGT0331:
https://i.imgur.com/Tus56tN.jpg View Quote Vince Jiga built Gen II? Looks like a Gen I handguard collar and Gen I tube, but updated with Gen II heatshield and side rail holes. Neato! |
|
|
Originally Posted By Philipp:
Not better over here http://abload.de/img/f86e360d-6f36-41d3-b9l6stt.jpg No blue sky rule everywhere... Edit: Hopefully with a better gun for this thread soonish View Quote |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.