User Panel
User Panel
User Panel
OH, USA
|
Posted: 2/4/2016 4:46:10 PM EDT
[#1]
Quote HistoryOriginally Posted By BurtSaun1049:
As mentioned in the Ops/AE thread, check out High Caliber Sales. I would jump at the chance to get a knurled can. Quote HistoryOriginally Posted By BurtSaun1049:
Originally Posted By cbfurg:
Originally Posted By RTUtah:
Originally Posted By minion42:
Originally Posted By cbfurg:
I'll have to decide. I'm leaning towards the can right now. I've got a cheap PA 4-14x44 ffp in an ADM mount that I could pull from another rifle to use while I save for the Nightforce... I could shoot now and get the can purchase moving forward. Did you guys use a trust? once the new law takes affect, is there still a point to using a trust? Yes, if you want other people to be able to use your stuff when you're not around. Absolutely set up a trust. And definitely do it now. Throw that PA scope on it and shoot until you have the coin for the NF/LT combo and you'll be glad you did. You guys have me sold. I'm waiting to make sure this freelance job goes through and then I'm shopping. Talked to a lawyer buddy today and another thats a dealer about the subject. I'll get moving on the trust. Where did you guys go to buy your aem5? I've talked to Allen on the phone and he was a good guy to talk to. Said he had some knurled ones in stock. Adco's pricing seems to be the best I can find... As mentioned in the Ops/AE thread, check out High Caliber Sales. I would jump at the chance to get a knurled can. I'll follow up with them and Allen to see where he recommends. I think I'll have him turn me a custom long collar as well for my BA barrel. Not sure the contour is completely accurate. Have you guys that have used Ballistic Advantage been good to go or have you had issues? |
|
|
|
Posted: 2/4/2016 6:29:01 PM EDT
[#2]
Quote HistoryOriginally Posted By chenault: My bank notarizes for free, yours might also. I have a coworker who is a notary public. So it's free and no hassle having to go to the bank or anywhere  |
|
|
|
OH, USA
|
Posted: 2/4/2016 7:10:45 PM EDT
[#3]
Quote HistoryOriginally Posted By dangerdan:
I have a coworker who is a notary public. So it's free and no hassle having to go to the bank or anywhere
Quote HistoryOriginally Posted By dangerdan:
Originally Posted By chenault:
My bank notarizes for free, yours might also. I have a coworker who is a notary public. So it's free and no hassle having to go to the bank or anywhere
My buddy who is a lawyer can take care of that as well. It's great to have friends! |
|
|
AZ, USA
|
Posted: 2/4/2016 7:30:09 PM EDT
[#4]
Quote HistoryOriginally Posted By cbfurg:
I'll follow up with them and Allen to see where he recommends. I think I'll have him turn me a custom long collar as well for my BA barrel. Not sure the contour is completely accurate. Have you guys that have used Ballistic Advantage been good to go or have you had issues? BA bbl in my Holland with long collar from ADCO. 5.5 turns with can, no issues. pic thread. 
|
|
|
OH, USA
|
Posted: 2/4/2016 10:04:19 PM EDT
[#5]
Quote HistoryOriginally Posted By spermgewehr44:
BA bbl in my Holland with long collar from ADCO. 5.5 turns with can, no issues. pic thread. http://s25.postimg.org/arnpogf73/12662513_10105880942605771_6800359970325384076_n.jpg Quote HistoryOriginally Posted By spermgewehr44:
Originally Posted By cbfurg:
I'll follow up with them and Allen to see where he recommends. I think I'll have him turn me a custom long collar as well for my BA barrel. Not sure the contour is completely accurate. Have you guys that have used Ballistic Advantage been good to go or have you had issues? BA bbl in my Holland with long collar from ADCO. 5.5 turns with can, no issues. pic thread. http://s25.postimg.org/arnpogf73/12662513_10105880942605771_6800359970325384076_n.jpg Thanks for the info and those are some nice looking rigs! |
|
|
|
Posted: 2/4/2016 10:11:13 PM EDT
[#6]
Question,
So if I was to buy a Bravo company mk12 mod bravo 1R (KAC RAS) complete upper , would this be acceptable for a clone mod 1? |
|
|
|
|
Posted: 2/4/2016 10:16:20 PM EDT
[#7]
Quote HistoryOriginally Posted By chenault: I did that same thing, but I'm finding the 1750 as a little too big. I'm starting to look at a Eberlestock backpack instead. You know, to take cute little hikes........where things die at the end.  Quote HistoryOriginally Posted By chenault: Originally Posted By K_weez: I'm trying a dedicated lower to share between my MK12 clone and my M4 Block 1 clone. I need a pelican case I think! http://i.imgur.com/Ga5xdDO.jpg?1 http://i.imgur.com/iX2IYS3.jpg?1 http://i.imgur.com/Kzbdxzj.jpg?1 http://i.imgur.com/FKybrtU.jpg?1 http://i.imgur.com/zxz54zm.jpg?1 I did that same thing, but I'm finding the 1750 as a little too big. I'm starting to look at a Eberlestock backpack instead. You know, to take cute little hikes........where things die at the end. |
|
|
|
|
Posted: 2/4/2016 10:19:13 PM EDT
[#8]
Quote HistoryOriginally Posted By js1977: Question, So if I was to buy a Bravo company mk12 mod bravo 1R (KAC RAS) complete upper , would this be acceptable for a clone mod 1? |
|
|
|
|
Posted: 2/4/2016 11:40:09 PM EDT
[#9]
|
|
|
|
|
Posted: 2/4/2016 11:44:16 PM EDT
[#10]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Surprising how well the paint matches up. Damned fine rifle. |
|
|
|
|
Posted: 2/4/2016 11:48:37 PM EDT
[#11]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr What a fucking picture that is. Damn. Bravo, good sir. 
|
|
|
|
|
Posted: 2/5/2016 12:09:07 AM EDT
[#12]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr That's about as perfect as it gets. |
|
|
|
AZ, USA
|
Posted: 2/5/2016 12:19:17 AM EDT
[#13]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Outfuckingstanding |
|
|
|
Posted: 2/5/2016 12:33:14 AM EDT
[#14]
Quote HistoryOriginally Posted By stoner63a:
That's something like I had planned to do with my 1968 M16A1 engraved lower, the Mk12 Mod 1 Upper assy and a Mk18/M4CQB upper assy in a Pelican 1720 case. Sort of like an early Mk18 gun kit with the Special Purpose Receiver to reach out, reach out and touch someone. Quote HistoryOriginally Posted By stoner63a:
Originally Posted By chenault:
Originally Posted By K_weez:
I'm trying a dedicated lower to share between my MK12 clone and my M4 Block 1 clone. I need a pelican case I think! http://i.imgur.com/Ga5xdDO.jpg?1 http://i.imgur.com/iX2IYS3.jpg?1 http://i.imgur.com/Kzbdxzj.jpg?1 http://i.imgur.com/FKybrtU.jpg?1 http://i.imgur.com/zxz54zm.jpg?1 I did that same thing, but I'm finding the 1750 as a little too big. I'm starting to look at a Eberlestock backpack instead. You know, to take cute little hikes........where things die at the end. https://i32.photobucket.com/albums/d23/pcrunnels/IMG_3107_zps9w9ehx4m.jpg Yea, it's handy, but damn it's heavy and long. I go to the gym my fair share, but I'm not too proud to use the wheels like I'm going through the airport. |
|
|
|
|
Posted: 2/5/2016 12:34:32 AM EDT
[#15]
Just curious... what manufacturers did you guys go with for your lowers and uppers?
I was going to go with BCM but I'm not so sure now. |
|
|
|
|
Posted: 2/5/2016 12:41:01 AM EDT
[Last Edit: Zakk101abn]
[#16]
Quote HistoryOriginally Posted By RadOP:
Outfuckingstanding Quote HistoryOriginally Posted By RadOP:
Originally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Outfuckingstanding Thanks ya'll. Those are Mr. H's rings. Thanks again for those. @ Johnson: Go with Nodak and be done. |
|
|
|
|
Posted: 2/5/2016 12:51:40 AM EDT
[#17]
Quote HistoryOriginally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Really just depends on how correct you want to be. My Mod1 has a Colt upper and Nodak A1 lower. |
|
|
|
NH, USA
|
Posted: 2/5/2016 1:13:38 AM EDT
[#18]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Whats the proper model name for the Ring picitinny mount? |
|
|
|
Posted: 2/5/2016 1:17:38 AM EDT
[#19]
Quote HistoryOriginally Posted By Houlds: Whats the proper model name for the Ring picitinny mount? Quote HistoryOriginally Posted By Houlds: Originally Posted By Zakk101abn: <a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Whats the proper model name for the Ring picitinny mount? ARMS #22M for Mk 12 Mod 0, #22H for Mk12 Mod 1. |
|
|
|
NH, USA
|
Posted: 2/5/2016 1:27:25 AM EDT
[#20]
Quote HistoryOriginally Posted By dangerdan:
ARMS #22M for Mk 12 Mod 0, #22H for Mk12 Mod 1. Quote HistoryOriginally Posted By dangerdan:
Originally Posted By Houlds:
Originally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Whats the proper model name for the Ring picitinny mount? ARMS #22M for Mk 12 Mod 0, #22H for Mk12 Mod 1. I was talking about the mount on top of the rings. Sorry about the confusion. |
|
|
|
Posted: 2/5/2016 1:29:16 AM EDT
[#21]
Quote HistoryOriginally Posted By Houlds: I was talking about the mount on top of the rings. Sorry about the confusion. Quote HistoryOriginally Posted By Houlds: Originally Posted By dangerdan: Originally Posted By Houlds: Originally Posted By Zakk101abn: <a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Whats the proper model name for the Ring picitinny mount? ARMS #22M for Mk 12 Mod 0, #22H for Mk12 Mod 1. I was talking about the mount on top of the rings. Sorry about the confusion. #22 TRC with #22 TRR |
|
|
|
NH, USA
|
Posted: 2/5/2016 1:33:02 AM EDT
[#22]
Quote HistoryOriginally Posted By dangerdan:
#22 TRC with #22 TRR Quote HistoryOriginally Posted By dangerdan:
Originally Posted By Houlds:
Originally Posted By dangerdan:
Originally Posted By Houlds:
Originally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Whats the proper model name for the Ring picitinny mount? ARMS #22M for Mk 12 Mod 0, #22H for Mk12 Mod 1. I was talking about the mount on top of the rings. Sorry about the confusion. #22 TRC with #22 TRR Awesome thank you. |
|
|
NY, USA
|
Posted: 2/5/2016 1:40:03 AM EDT
[Last Edit: Davey_Sickboy]
[#23]
Anyone have the pic of the dude with the PRS on his mod1? I need some motivation pics to justify the $200 stock that I just purchased but could not afford for my 308 mod1.
|
|
|
|
Posted: 2/5/2016 1:54:16 AM EDT
[Last Edit: StevieJ309]
[#24]
|
|
|
|
|
Posted: 2/5/2016 2:01:08 AM EDT
[Last Edit: KGLaw]
[#25]
Quote HistoryThat's an UBR, but I still love that picture... 
|
|
|
|
NY, USA
|
Posted: 2/5/2016 2:02:57 AM EDT
[#26]
Quote HistoryOriginally Posted By Hunterex:
That's an UBR, but I still love that picture... Quote HistoryOriginally Posted By Hunterex:
That's an UBR, but I still love that picture... I was never a fan of that setup. It just didn't look right to me. Thanks tho Stevo |
|
|
|
Posted: 2/5/2016 2:04:01 AM EDT
[Last Edit: KGLaw]
[#27]
Quote HistoryOriginally Posted By Davey_Sickboy:
I was never a fan of that setup. It just didn't look right to me. Thanks tho Stevo Quote HistoryOriginally Posted By Davey_Sickboy:
Originally Posted By Hunterex:
That's an UBR, but I still love that picture... I was never a fan of that setup. It just didn't look right to me. Thanks tho Stevo 
Courtesy of Lance's excellent imgur gallery. |
|
|
|
|
Posted: 2/5/2016 2:09:14 AM EDT
[#28]
Quote HistoryOriginally Posted By StevieJ309:
Really just depends on how correct you want to be. My Mod1 has a Colt upper and Nodak A1 lower. Quote HistoryOriginally Posted By StevieJ309:
Originally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Really just depends on how correct you want to be. My Mod1 has a Colt upper and Nodak A1 lower. I'm starting to lean that way myself now. Are there any markings on the Colt upper that lets one know it's a Colt upper? |
|
|
|
NH, USA
|
Posted: 2/5/2016 2:11:51 AM EDT
[#29]
Quote HistoryOriginally Posted By Johnson184:
I'm starting to lean that way myself now. Are there any markings on the Colt upper that lets one know it's a Colt upper? Quote HistoryOriginally Posted By Johnson184:
Originally Posted By StevieJ309:
Originally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Really just depends on how correct you want to be. My Mod1 has a Colt upper and Nodak A1 lower. I'm starting to lean that way myself now. Are there any markings on the Colt upper that lets one know it's a Colt upper? They usually have a C near the forge mark |
|
|
|
Posted: 2/5/2016 2:12:12 AM EDT
[#30]
Quote HistoryOriginally Posted By Johnson184:
I'm starting to lean that way myself now. Are there any markings on the Colt upper that lets one know it's a Colt upper? Quote HistoryOriginally Posted By Johnson184:
Originally Posted By StevieJ309:
Originally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Really just depends on how correct you want to be. My Mod1 has a Colt upper and Nodak A1 lower. I'm starting to lean that way myself now. Are there any markings on the Colt upper that lets one know it's a Colt upper? Typically a big C forged into the upper near the actual forge mark. |
|
|
|
|
Posted: 2/5/2016 2:12:42 AM EDT
[#31]
Quote HistoryOriginally Posted By Davey_Sickboy:
I was never a fan of that setup. It just didn't look right to me. Thanks tho Stevo Quote HistoryOriginally Posted By Davey_Sickboy:
Originally Posted By Hunterex:
That's an UBR, but I still love that picture... I was never a fan of that setup. It just didn't look right to me. Thanks tho Stevo Haha damnit. I've been all sorts of retarded tonight. Just ignore me.
|
|
|
|
|
Posted: 2/5/2016 9:09:49 AM EDT
[#32]
Quote HistoryOriginally Posted By Johnson184: Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Unbranded BCM upper, NoDak lower. |
|
|
|
|
Posted: 2/5/2016 9:38:28 AM EDT
[#33]
Quote HistoryOriginally Posted By Davey_Sickboy:
Anyone have the pic of the dude with the PRS on his mod1? I need some motivation pics to justify the $200 stock that I just purchased but could not afford for my 308 mod1. -Sell that ugly fucker. -Get a proper A1. -Profit! |
|
|
|
|
Posted: 2/5/2016 9:40:02 AM EDT
[#34]
Quote HistoryOriginally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Colt upper, NoDak A1 lower or now you could even get a Brownell's A1 lower. |
|
|
|
NY, USA
|
Posted: 2/5/2016 11:52:15 AM EDT
[Last Edit: Davey_Sickboy]
[#35]
Quote HistoryOriginally Posted By Engineer5:
-Sell that ugly fucker. -Get a proper A1. -Profit! Quote HistoryOriginally Posted By Engineer5:
Originally Posted By Davey_Sickboy:
Anyone have the pic of the dude with the PRS on his mod1? I need some motivation pics to justify the $200 stock that I just purchased but could not afford for my 308 mod1. -Sell that ugly fucker. -Get a proper A1. -Profit! Na, A1 don't look right on a 308. I tried, looks off. I've got an M16 A1 type D stock on my 556 mod1....I love it. I look at pics of when I had the A2 on her and she looked weird to me now. I think it would look good with the PRS, not to mention the ability to make the stock fully customized to me, not having to build it up to get a solid cheek weld, or guess where I had my cheek while finding proper eye relief. Consistency equals repeatability equals bullet holes being very close together. I'm also a big fan of the way the ACE looks on Hollies, but that's just my 2 pennies. |
|
|
NY, USA
|
Posted: 2/5/2016 12:18:11 PM EDT
[#36]
And thanks for the pics Hunter!
|
|
|
|
Posted: 2/5/2016 12:45:17 PM EDT
[#37]
Quote HistoryOriginally Posted By RTUtah:
Unbranded BCM upper, NoDak lower. Quote HistoryOriginally Posted By RTUtah:
Originally Posted By Johnson184:
Just curious... what manufacturers did you guys go with for your lowers and uppers? I was going to go with BCM but I'm not so sure now. Unbranded BCM upper, NoDak lower. This. The $80 blem BCM deals are pretty hard to beat. |
|
|
|
|
Posted: 2/5/2016 2:33:10 PM EDT
[#38]
Quote HistoryOriginally Posted By Davey_Sickboy:
Na, A1 don't look right on a 308. I tried, looks off. I've got an M16 A1 type D stock on my 556 mod1....I love it. I look at pics of when I had the A2 on her and she looked weird to me now. http://<a href=http://i724.photobucket.com/albums/ww245/Davey_Sickboy/IMG_6328_zpsfkzrwd3y.jpg</a>" /> I think it would look good with the PRS, not to mention the ability to make the stock fully customized to me, not having to build it up to get a solid cheek weld, or guess where I had my cheek while finding proper eye relief. Consistency equals repeatability equals bullet holes being very close together. I'm also a big fan of the way the ACE looks on Hollies, but that's just my 2 pennies. Quote HistoryOriginally Posted By Davey_Sickboy:
Originally Posted By Engineer5:
Originally Posted By Davey_Sickboy:
Anyone have the pic of the dude with the PRS on his mod1? I need some motivation pics to justify the $200 stock that I just purchased but could not afford for my 308 mod1. -Sell that ugly fucker. -Get a proper A1. -Profit! Na, A1 don't look right on a 308. I tried, looks off. I've got an M16 A1 type D stock on my 556 mod1....I love it. I look at pics of when I had the A2 on her and she looked weird to me now. http://<a href=http://i724.photobucket.com/albums/ww245/Davey_Sickboy/IMG_6328_zpsfkzrwd3y.jpg</a>" /> I think it would look good with the PRS, not to mention the ability to make the stock fully customized to me, not having to build it up to get a solid cheek weld, or guess where I had my cheek while finding proper eye relief. Consistency equals repeatability equals bullet holes being very close together. I'm also a big fan of the way the ACE looks on Hollies, but that's just my 2 pennies. I guess I missed the part about it going on the .308. |
|
|
|
|
Posted: 2/5/2016 5:12:13 PM EDT
[#39]
Quote HistoryOriginally Posted By Zakk101abn:
<a href="https://flic.kr/p/DMpgou" target="_blank">https://farm2.staticflickr.com/1514/24798982076_33ee79290f_k.jpg</a>IMG_6478 by zachary forfang, on Flickr Looks great
|
|
|
|
PA, USA
|
Posted: 2/5/2016 5:21:21 PM EDT
[Last Edit: HaveBlue83]
[#40]
So.......good news:
I qualify for the Pell and fafsa grants. Whenever they pass the PA budget i will have something like 6k coming to me. This will allow me to pay for anything in school and it is for furthuring my education. I go to therapy once a week or more and i feel that using this grant to pay for some quiet time therapy will really allow me to further my education and mental state. And by weekly therapy i mean the range. And by quiet time i mean a knurled AEM 5. And now we wait for the budget to be passed. Pic thread. Went out today. Painted my spotter. Hit 300m in snow. 400m hit too :P    |
|
|
|
Posted: 2/5/2016 5:45:12 PM EDT
[Last Edit: chenault]
[#41]
Quote HistoryOriginally Posted By HaveBlue83:
So.......good news: I qualify for the Pell and fafsa grants. Whenever they pass the PA budget i will have something like 6k coming to me. This will allow me to pay for anything in school and it is for furthuring my education. I go to therapy once a week or more and i feel that using this grant to pay for some quiet time therapy will really allow me to further my education and mental state. And by weekly therapy i mean the range. And by quiet time i mean a knurled AEM 5. And now we wait for the budget to be passed. Pic thread. Went out today. Painted my spotter. Hit 300m in snow. 400m hit too :P <a href="http://postimage.org/" target="_blank">http://s18.postimg.org/jd05x1815/20160205_121244.jpg</a> <a href="http://postimage.org/" target="_blank">http://s18.postimg.org/sjigkbd9l/20160205_122934.jpg</a> <a href="http://postimage.org/" target="_blank">http://s18.postimg.org/9d59h4wrt/20160205_142138.jpg</a> Lol, just make sure you finish school, otherwise you have to pay those Grants back. I wish I had a range like that. Nice shooting by the way. |
|
|
|
|
Posted: 2/5/2016 5:50:17 PM EDT
[#42]
Quote HistoryOriginally Posted By HaveBlue83:
So.......good news: I qualify for the Pell and fafsa grants. Whenever they pass the PA budget i will have something like 6k coming to me. This will allow me to pay for anything in school and it is for furthuring my education. I go to therapy once a week or more and i feel that using this grant to pay for some quiet time therapy will really allow me to further my education and mental state. And by weekly therapy i mean the range. And by quiet time i mean a knurled AEM 5. And now we wait for the budget to be passed. As lazy as I am, I'm actually thinking of applying to some colleges as well. I figure it's about damn time. Maybe I'll check those out. |
|
|
|
|
Posted: 2/5/2016 5:52:44 PM EDT
[#43]
I guess Leupold doesn't produce the original scope for the Mod 0 and Mod 1? What's the next closest thing to it, that they do produce? I don't like hunting for shit on EE, gunbroker and always paying a premium for it because it's "rare".
|
|
|
|
|
Posted: 2/5/2016 6:02:23 PM EDT
[Last Edit: KGLaw]
[#44]
Quote HistoryOriginally Posted By ArmyInfantryVet:
I guess Leupold doesn't produce the original scope for the Mod 0 and Mod 1? What's the next closest thing to it, that they do produce? I don't like hunting for shit on EE, gunbroker and always paying a premium for it because it's "rare". Mk4 illuminated mildot 3.5-10x40 with m3 turrets for the SPR/early Mod 0. (67945) Ts30 a2 for late Mod 0 and Mod 1. Barring that Mk4 2.5-8x36 illuminated tmr with m2 turrets. (112633 and 67925) |
|
|
|
|
Posted: 2/5/2016 6:17:44 PM EDT
[#45]
Quote HistoryOriginally Posted By Hunterex: Mk4 illuminated mildot 3.5-10x40 with m3 turrets for the SPR/early Mod 0. (67945) Ts30 a2 for late Mod 0 and Mod 1. Barring that Mk4 2.5-8x36 illuminated tmr with m2 turrets. (112633 and 67925) Quote HistoryOriginally Posted By Hunterex: Originally Posted By ArmyInfantryVet: I guess Leupold doesn't produce the original scope for the Mod 0 and Mod 1? What's the next closest thing to it, that they do produce? I don't like hunting for shit on EE, gunbroker and always paying a premium for it because it's "rare". Mk4 illuminated mildot 3.5-10x40 with m3 turrets for the SPR/early Mod 0. (67945) Ts30 a2 for late Mod 0 and Mod 1. Barring that Mk4 2.5-8x36 illuminated tmr with m2 turrets. (112633 and 67925) See, I thought the TS30 line was completely done? I can't find it on their website or anything. And all the non-auction sites have it as "out of stock" |
|
|
|
|
Posted: 2/5/2016 6:39:36 PM EDT
[#46]
Quote HistoryOriginally Posted By ArmyInfantryVet:
See, I thought the TS30 line was completely done? I can't find it on their website or anything. And all the non-auction sites have it as "out of stock" Quote HistoryOriginally Posted By ArmyInfantryVet:
Originally Posted By Hunterex:
Originally Posted By ArmyInfantryVet:
I guess Leupold doesn't produce the original scope for the Mod 0 and Mod 1? What's the next closest thing to it, that they do produce? I don't like hunting for shit on EE, gunbroker and always paying a premium for it because it's "rare". Mk4 illuminated mildot 3.5-10x40 with m3 turrets for the SPR/early Mod 0. (67945) Ts30 a2 for late Mod 0 and Mod 1. Barring that Mk4 2.5-8x36 illuminated tmr with m2 turrets. (112633 and 67925) See, I thought the TS30 line was completely done? I can't find it on their website or anything. And all the non-auction sites have it as "out of stock" They lumped it in with the standard Mk4 on the site - https://www.leupold.com/hunting-shooting/scopes/mark-4-mrt-riflescopes/mark-4-2-5-8x36mm-mrt-m2-illum-reticle/ Listed as in stock at http://www.eurooptic.com/leupold-mark-4-mrt-2-5-8x36-m2-ts-30-a2-rifle-scope-30mm-tube-illum-tmr-112633.aspx http://www.opticsplanet.com/leupold-mark4-25-8x36mm-mr-t-m2-illuminated-reticle-tactical-scope.html (Third one down) http://www.walmart.com/ip/Leupold-112633-Mark-4-MR-T-2.5-8x36mm-M2-Mte-Ill/23250291 http://www.amazon.com/Leupold-112633-Mark4-MR-2-5-8x36mm/dp/B007KKOOZA Though somewhat amusing how none show a TS30A2 for the stock picture. Not even Leupold's own site.
|
|
|
|
|
Posted: 2/5/2016 7:41:12 PM EDT
[#47]
Leupold 2.5-8x36 Mark 4 MR/T 30mm Riflescope (*****This is the TS-30A2*****)
The only difference between the two, is that the TS-30A2 comes with 5.56 77gr turret caps, has alignment etchings on the tube (not really needed) and battery cap lanyard...which eventually breaks. The non TS-30A2 MR/T is functionally the same. The turret knobs are both .5 MOA increments, however it comes with .308 168gr calibrated caps. BOTH show markings ever 1/2 MOA, but also have markings for the associated caliber. |
|
|
|
PA, USA
|
Posted: 2/5/2016 7:55:22 PM EDT
[Last Edit: HaveBlue83]
[#48]
Quote HistoryOriginally Posted By ArmyInfantryVet: I guess Leupold doesn't produce the original scope for the Mod 0 and Mod 1? What's the next closest thing to it, that they do produce? I don't like hunting for shit on EE, gunbroker and always paying a premium for it because it's "rare". Mk12 clone wars man. this might not be the game for you if you don't wanna do that, because that IS how you get a proper MK12 and it's the chase that makes it awesome. The fun is getting it at a GOOD price :) -I def will not be dropping out of school...the GI Bill pays for it and I am loving it. no worries  |
|
|
|
Posted: 2/5/2016 8:52:46 PM EDT
[#49]
Sometimes I love Ft Campbell...
Picked up a SF scout ultra with a KX2C head and a "authentically" used gen 1 SOPMOD stock for under $90! Every once and awhile you get one by those mil surplus stores. |
|
|
|
NH, USA
|
Posted: 2/5/2016 9:29:19 PM EDT
[#50]
Is this the proper scope for a MK12: Mark 4 MR/T 2.5-8x36mm (30mm) M2 - TS-30 A2 Matte Illum. TMR I can get one for a very nice price but don't want to buy it if it's the wrong one. This is my other options: Mark 4 MR/T 2.5-8x36mm (30mm) M2 Matte Illum. TMR
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
