User Panel
User Panel
User Panel
USA
|
Posted: 8/1/2015 4:27:59 PM EDT
[#1]
Also just noticed the back rirlfe had the full railed #38, where these used as well.
|
|
|
PA, USA
|
Posted: 8/1/2015 4:36:32 PM EDT
[Last Edit: HaveBlue83]
[#2]
Quote HistoryOriginally Posted By Davey_Sickboy: I have that stubby magpul grip floating around somewhere. If I can find it, I'll give it to you. I don't use it anyway. MAYBE that grip is just your Mod H fetus and it needs to grow into a full upper? LOL |
|
|
|
Posted: 8/1/2015 4:46:11 PM EDT
[#3]
Quote HistoryOriginally Posted By Jax_Guns: Also just noticed the back rirlfe had the full railed #38, where these used as well. |
|
|
|
|
Posted: 8/1/2015 5:04:09 PM EDT
[#4]
Quote HistoryOriginally Posted By Jax_Guns:
What was put on top of the Tactical Ring Cap and Rail on the early Mod0s? I don't think I have ever seen a MRDS on one, did MRDSs even exist in the early 2000s - don't recall seeing Doctor sights until 05 or so. Here is a late gen III mod 0 with a optic on the TRR. 
|
|
|
|
|
Posted: 8/1/2015 6:01:02 PM EDT
[#5]
Quote HistoryOriginally Posted By B7R: Here is a late gen III mod 0 with a optic on the TRR. http://i1239.photobucket.com/albums/ff502/augeekim/DSC00284.jpg Quote HistoryOriginally Posted By B7R: Originally Posted By Jax_Guns: What was put on top of the Tactical Ring Cap and Rail on the early Mod0s? I don't think I have ever seen a MRDS on one, did MRDSs even exist in the early 2000s - don't recall seeing Doctor sights until 05 or so. Here is a late gen III mod 0 with a optic on the TRR. http://i1239.photobucket.com/albums/ff502/augeekim/DSC00284.jpg Augee used that rifle in the 'Stan IIRC. |
|
|
|
USA
|
Posted: 8/1/2015 6:46:40 PM EDT
[#6]
For the Gen III tubes - aluminum barrel nut or steel barrel nut?
Discuss. |
|
|
PA, USA
|
Posted: 8/1/2015 7:24:10 PM EDT
[Last Edit: HaveBlue83]
[#7]
HEADS UP:
|
|
|
|
Posted: 8/1/2015 10:13:42 PM EDT
[Last Edit: gunnut003]
[#8]
Quote HistoryOriginally Posted By RTUtah:
Augee used played with that rifle in the 'Stan IIRC. Quote HistoryOriginally Posted By RTUtah:
Originally Posted By B7R:
Originally Posted By Jax_Guns:
What was put on top of the Tactical Ring Cap and Rail on the early Mod0s? I don't think I have ever seen a MRDS on one, did MRDSs even exist in the early 2000s - don't recall seeing Doctor sights until 05 or so. Here is a late gen III mod 0 with a optic on the TRR. http://i1239.photobucket.com/albums/ff502/augeekim/DSC00284.jpg Augee used played with that rifle in the 'Stan IIRC. I think that is more correct....  ...I think he took the pic, though.
|
|
|
|
|
Posted: 8/2/2015 12:57:50 AM EDT
[#9]
|
|
|
|
|
Posted: 8/2/2015 1:05:51 AM EDT
[Last Edit: KGLaw]
[#10]
Quote HistoryOriginally Posted By lancecriminal86:
Preview.jpg <a href="https://flic.kr/p/wNyFrF" target="_blank">https://farm1.staticflickr.com/280/20217638125_cfa0692e0b_k.jpg</a>Preview by LanceCriminal86, on Flickr Now you're cooking with Crisco. What do you think about the change in handling? |
|
|
|
|
Posted: 8/2/2015 4:14:01 AM EDT
[#11]
Quote HistoryOriginally Posted By Hunterex:
Now you're cooking with Crisco. What do you think about the change in handling? Quote HistoryOriginally Posted By Hunterex:
Originally Posted By lancecriminal86:
Preview.jpg <a href="https://flic.kr/p/wNyFrF" target="_blank">https://farm1.staticflickr.com/280/20217638125_cfa0692e0b_k.jpg</a>Preview by LanceCriminal86, on Flickr Now you're cooking with Crisco. What do you think about the change in handling? Massive. Can't wait to get it properly assembled and out to the range. Hand snugged test fit went very well. |
|
|
|
PA, USA
|
Posted: 8/2/2015 12:14:28 PM EDT
[Last Edit: HaveBlue83]
[#12]
NVM, got my confirmation From Reddit Spec sheets "As per S-8's request, ...............and Cerakoted the uppers FDE."
nitpick nitpick crazy-ness. new Upper has to get duracoated FDE this week. lol. |
|
|
|
Posted: 8/2/2015 1:00:05 PM EDT
[#13]
Quote HistoryOriginally Posted By HaveBlue83:
NVM, got my confirmation From Reddit Spec sheets "As per S-8's request, ...............and Cerakoted the uppers FDE." nitpick nitpick crazy-ness. new Upper has to get duracoated FDE this week. lol. Browse back through the Holland pics. There are Black Gen III HGs and Black uppers. it wasn't 100% of Mod H uppers that had the FDE duracoat. |
|
|
|
AZ, USA
|
Posted: 8/2/2015 1:36:53 PM EDT
[#14]
I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle.
|
|
|
|
Posted: 8/2/2015 2:09:20 PM EDT
[Last Edit: BurtSaun1049]
[#15]
Quote HistoryOriginally Posted By DoctorLove:
I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle. http://i821.photobucket.com/albums/zz135/556man1/DSC00109_zpsyonqwylz.jpg 
Thanks for your service bro. Oh, and you ahould clone your issue rifle 
|
|
|
|
|
Posted: 8/2/2015 2:24:58 PM EDT
[#16]
The Ballistic Advantage 16" MOD H barrel continues to amaze me...or maybe I'm just getting better...or maybe it's finally loosened up. It has about 300 rounds through it now.
Here's a 5 shot group @ 100yds with a Bushnell 1-6.5 SMRS and CBC 77grn .7135 - .224 = .4895 MOA 
|
|
|
|
|
Posted: 8/2/2015 3:37:51 PM EDT
[#17]
Quote HistoryOriginally Posted By DoctorLove: I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle. http://i821.photobucket.com/albums/zz135/556man1/DSC00109_zpsyonqwylz.jpg Outstanding. And fuck Terry. |
|
|
|
PA, USA
|
Posted: 8/2/2015 3:56:44 PM EDT
[#18]
Quote HistoryOriginally Posted By lancecriminal86: Browse back through the Holland pics. There are Black Gen III HGs and Black uppers. it wasn't 100% of Mod H uppers that had the FDE duracoat. Quote HistoryOriginally Posted By lancecriminal86: Originally Posted By HaveBlue83: NVM, got my confirmation From Reddit Spec sheets "As per S-8's request, ...............and Cerakoted the uppers FDE." nitpick nitpick crazy-ness. new Upper has to get duracoated FDE this week. lol. Browse back through the Holland pics. There are Black Gen III HGs and Black uppers. it wasn't 100% of Mod H uppers that had the FDE duracoat. i did see a few with black HG and upper though the thread... The particular ones i am using for ref with the RECCE rail have a fde upper under that worn off paint, so i kinda wanted to do it like that. Obv a "unit requested FDE" vs "get these out by friday" are two different things. Been there dont that. -Terry should be honored to have fallen to such a weapons system :D |
|
|
|
Posted: 8/2/2015 4:14:34 PM EDT
[#19]
Quote HistoryOriginally Posted By gunnut003:
I think that is more correct.... ...I think he took the pic, though.Quote HistoryOriginally Posted By gunnut003:
Originally Posted By RTUtah:
Originally Posted By B7R:
Originally Posted By Jax_Guns:
What was put on top of the Tactical Ring Cap and Rail on the early Mod0s? I don't think I have ever seen a MRDS on one, did MRDSs even exist in the early 2000s - don't recall seeing Doctor sights until 05 or so. Here is a late gen III mod 0 with a optic on the TRR. http://i1239.photobucket.com/albums/ff502/augeekim/DSC00284.jpg Augee used played with that rifle in the 'Stan IIRC. I think that is more correct.... ...I think he took the pic, though.Accurate statement.
~Augee |
|
|
|
NY, USA
|
Posted: 8/2/2015 5:02:52 PM EDT
[#20]
Quote HistoryOriginally Posted By HaveBlue83:
Darn. I just bought one yesterday for $22 lol. They had FDE in stock. MAYBE that grip is just your Mod H fetus and it needs to grow into a full upper? LOL Quote HistoryOriginally Posted By HaveBlue83:
Originally Posted By Davey_Sickboy:
I have that stubby magpul grip floating around somewhere. If I can find it, I'll give it to you. I don't use it anyway. MAYBE that grip is just your Mod H fetus and it needs to grow into a full upper? LOL Not a fan of them grips |
|
|
|
Posted: 8/2/2015 5:24:27 PM EDT
[#21]
Quote HistoryOriginally Posted By Augee: Accurate statement. ~Augee Quote HistoryOriginally Posted By Augee: Originally Posted By gunnut003: Originally Posted By RTUtah: Originally Posted By B7R: Originally Posted By Jax_Guns: What was put on top of the Tactical Ring Cap and Rail on the early Mod0s? I don't think I have ever seen a MRDS on one, did MRDSs even exist in the early 2000s - don't recall seeing Doctor sights until 05 or so. Here is a late gen III mod 0 with a optic on the TRR. http://i1239.photobucket.com/albums/ff502/augeekim/DSC00284.jpg Augee used played with that rifle in the 'Stan IIRC. I think that is more correct.... ...I think he took the pic, though.Accurate statement. ~Augee lol, my bad. |
|
|
|
|
Posted: 8/2/2015 6:58:55 PM EDT
[#22]
Quote HistoryOriginally Posted By DoctorLove:
I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle. http://i821.photobucket.com/albums/zz135/556man1/DSC00109_zpsyonqwylz.jpg That's ( . )( . ) my man. Good show. |
|
|
|
AZ, USA
|
Posted: 8/2/2015 7:20:47 PM EDT
[#23]
Quote HistoryOriginally Posted By Zakk101abn:
That's ( . )( . ) my man. Good show. Quote HistoryOriginally Posted By Zakk101abn:
Originally Posted By DoctorLove:
I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle. http://i821.photobucket.com/albums/zz135/556man1/DSC00109_zpsyonqwylz.jpg That's ( . )( . ) my man. Good show. thanks |
|
|
AZ, USA
|
Posted: 8/2/2015 7:27:13 PM EDT
[#24]
Quote HistoryOriginally Posted By BurtSaun1049:
Thanks for your service bro. Oh, and you ahould clone your issue rifle Quote HistoryOriginally Posted By BurtSaun1049:
Originally Posted By DoctorLove:
I really miss mine. It was accurate and reliable. There are a few less Talibs on this planet because this rifle. http://i821.photobucket.com/albums/zz135/556man1/DSC00109_zpsyonqwylz.jpg
Thanks for your service bro. Oh, and you ahould clone your issue rifle Technology and parts have come a long way from then until now. I have built nicer rifles with better performance for less than it would have cost to clone any of my service rifles. I am not into cloning. They give me rifles and I use them, but I have my own preferences. I had SASR's to my disposal, but I don't plan on cloning any of those either. 
|
|
|
NC, USA
|
Posted: 8/2/2015 7:54:09 PM EDT
[#25]
Quote HistoryOriginally Posted By lancecriminal86:
Browse back through the Holland pics. There are Black Gen III HGs and Black uppers. it wasn't 100% of Mod H uppers that had the FDE duracoat. That's correct. I have seen some guns with FDE uppers and handguards, some with FDE hanguards and black uppers, and two that were all black, including mine. |
|
|
|
Posted: 8/2/2015 7:59:40 PM EDT
[#26]
Heads up to the guys looking for a set of non lever stop 22H's....there is a set in the used optics section. I have no affiliation.
|
|
|
|
|
Posted: 8/2/2015 8:19:49 PM EDT
[#27]
Quote HistoryOriginally Posted By Mad4wd:
Heads up to the guys looking for a set of non lever stop 22H's....there is a set in the used optics section. I have no affiliation. Thanks for the heads up! Hopefully I get 'em. |
|
|
|
FL, USA
|
Posted: 8/2/2015 8:25:27 PM EDT
[#28]
Whats the consensus of one Selling his TS-30 W/77gr turrets for an LR/T M2 Illum? I would prefer a NF 2.5-10x24, but I'm not having the best luck finding one these days.
Thanks |
|
|
|
Posted: 8/2/2015 8:29:48 PM EDT
[#29]
Quote HistoryOriginally Posted By mjh173:
Whats the consensus of one Selling his TS-30 W/77gr turrets for an LR/T M2 Illum? I would prefer a NF 2.5-10x24, but I'm not having the best luck finding one these days. Thanks Id keep a TS-30 if you have it. Is it on a Mod 1 or something else? |
|
|
|
|
Posted: 8/2/2015 8:41:18 PM EDT
[#30]
Quote HistoryOriginally Posted By StevieJ309:
Thanks for the heads up! Hopefully I get 'em. Quote HistoryOriginally Posted By StevieJ309:
Originally Posted By Mad4wd:
Heads up to the guys looking for a set of non lever stop 22H's....there is a set in the used optics section. I have no affiliation. Thanks for the heads up! Hopefully I get 'em. StevieJ309: Your welcome bro |
|
|
|
USA
|
Posted: 8/2/2015 8:46:56 PM EDT
[#31]
Quote HistoryOriginally Posted By JAR-SPR:
For the Gen III tubes - aluminum barrel nut or steel barrel nut? Discuss. Reposting for an answer. |
|
|
|
Posted: 8/2/2015 8:50:08 PM EDT
[#32]
What are you asking exactly and what do you want to discuss?
|
|
|
|
PA, USA
|
Posted: 8/2/2015 8:53:43 PM EDT
[#33]
I mean....the GEN III i just ordered comes with AL. id prefer AL to steel purely on weight and corrosion improvements alone.
|
|
|
|
Posted: 8/2/2015 8:54:26 PM EDT
[#34]
Quote HistoryOriginally Posted By Mad4wd:
What are you asking exactly and what do you want to discuss? PRi makes them in both aluminum and steel. I assume asking the pros and cons of the two. My Mod 0 is wearing an aluminum nut and I have no concern with it. |
|
|
|
USA
|
Posted: 8/2/2015 9:03:25 PM EDT
[#35]
Quote HistoryOriginally Posted By Hunterex:
PRi makes them in both aluminum and steel. I assume asking the pros and cons of the two. My Mod 0 is wearing an aluminum nut and I have no concern with it. Quote HistoryOriginally Posted By Hunterex:
Originally Posted By Mad4wd:
What are you asking exactly and what do you want to discuss? PRi makes them in both aluminum and steel. I assume asking the pros and cons of the two. My Mod 0 is wearing an aluminum nut and I have no concern with it. I was wondering what the Mod 0 actually had, to be as detailed as possible in the specs. I have a Gen III riflelength from 2002 with a steel nut and one from 2007 with an aluminum nut--not sure which one to use! |
|
|
|
Posted: 8/2/2015 9:16:19 PM EDT
[#36]
Alluminum here also with no issues. I actually have never heard of anyone having an issue with a Mod0 barrel nut? I would say use the earliest parts you have on the Mod0 and the later ones on a Mod Holland
|
|
|
|
|
Posted: 8/2/2015 9:21:01 PM EDT
[Last Edit: MILSPEC556]
[#37]
The aluminum nut should be strong enough for most realistic stresses put on it, and it's lighter. Not sure if it would survive the perfect storm of a fall out of a deuce and a half or not though.
If I had the option I'd run the steel nut though for the higher tensile strength. The aluminum nut should hold up jusy fine too though, unless some crazy shit goes down. ETA now that I think about it even more, I think the receiver threads/receiver would give before even the aluminum nut did. |
|
|
|
|
Posted: 8/2/2015 9:27:46 PM EDT
[#38]
Quote HistoryOriginally Posted By mjh173:
Whats the consensus of one Selling his TS-30 W/77gr turrets for an LR/T M2 Illum? I would prefer a NF 2.5-10x24, but I'm not having the best luck finding one these days. Thanks IM sent. |
|
|
|
PA, USA
|
Posted: 8/2/2015 10:57:15 PM EDT
[#39]
-Going through my hodhge podge....My rec extension isnt 4pos colt.... Its a dpms 6pos. It's coming off now. My SD-E is out and an SSA-E is coming this week.
-I checked with NDS and they said they will be doing a run of A1 (80% specifically) before the end of the year. When I hear from them I will post up in case anyone wants to go from A2 to A1 lower (like moi) to be legit.
-still looking for ARMS 22m. That's pretty much the last piece other than my incorrect place holder optic. |
|
|
|
Posted: 8/2/2015 11:32:27 PM EDT
[#40]
Quote HistoryOriginally Posted By HaveBlue83:
-Going through my hodhge podge....My rec extension isnt 4pos colt.... Its a dpms 6pos. It's coming off now. My SD-E is out and an SSA-E is coming this week. -I checked with NDS and they said they will be doing a run of A1 (80% specifically) before the end of the year. When I hear from them I will post up in case anyone wants to go from A2 to A1 lower (like moi) to be legit. -still looking for ARMS 22m. That's pretty much the last piece other than my incorrect place holder optic. You care about leverstops, correct? I have leverstop 22Ms that I no longer require if you care more about shooting it. |
|
|
|
PA, USA
|
Posted: 8/2/2015 11:45:09 PM EDT
[Last Edit: HaveBlue83]
[#41]
Quote HistoryOriginally Posted By lancecriminal86: You care about leverstops, correct? I have leverstop 22Ms that I no longer require if you care more about shooting it. I am able to hold out for NLS. I am anxious, but I can wait for correct. correct > shooting it right now  . thx for the offer tho! one other member is deciding on 22m vs his LT-104 so I have a line on 1 set in the future if he goes Larue. |
|
|
|
Posted: 8/3/2015 12:42:55 AM EDT
[Last Edit: dangerdan]
[#42]
Quote HistoryOriginally Posted By mjh173: Whats the consensus of one Selling his TS-30 W/77gr turrets for an LR/T M2 Illum? I would prefer a NF 2.5-10x24, but I'm not having the best luck finding one these days. Thanks I hated the 2.5-10x24. Quality glass should be priority. Just because it's spec, doesn't make it the best. If anything, get the x32. Not saying the x24 is bad, but the x32 seemed more brighter and clearer. Probably a reason NF doesn't put them out. |
|
|
|
|
Posted: 8/3/2015 5:58:45 AM EDT
[#43]
Quote HistoryOriginally Posted By Engineer5:
Can anyone tell me what sling that is in the third picture.......? http://img.photobucket.com/albums/v456/Engineer23/MK12-1_zps77bhw2gs.jpg http://img.photobucket.com/albums/v456/Engineer23/MK12-2_zpsmq9krrcp.jpg http://img.photobucket.com/albums/v456/Engineer23/c_spr03_zpse203096a.jpg Is that Mike Hawke? It looks like him...just younger... |
|
|
|
PA, USA
|
Posted: 8/3/2015 9:47:46 AM EDT
[#44]
Holland/CARBINE buffer tube guys:
-what buffer and spring are you running, and what o clock pos is your brass coming out with & w/o a can? Im gonna run the PRI GB. Have an SLR but cant run that for spec. |
|
|
|
Posted: 8/3/2015 10:11:27 AM EDT
[#45]
Quote HistoryOriginally Posted By HaveBlue83:
Holland/CARBINE buffer tube guys: -what buffer and spring are you running, and what o clock pos is your brass coming out with & w/o a can? Im gonna run the PRI GB. Have an SLR but cant run that for spec. If you aren't running a Noveske barrel on a Holland I wouldn't push the specs as hard. You'd always max out at a certain % and would be short of 100% anyways. Just a thought. |
|
|
|
|
Posted: 8/3/2015 10:24:35 AM EDT
[#46]
Quote HistoryOriginally Posted By lancecriminal86:
If you aren't running a Noveske barrel on a Holland I wouldn't push the specs as hard. You'd always max out at a certain % and would be short of 100% anyways. Just a thought. Quote HistoryOriginally Posted By lancecriminal86:
Originally Posted By HaveBlue83:
Holland/CARBINE buffer tube guys: -what buffer and spring are you running, and what o clock pos is your brass coming out with & w/o a can? Im gonna run the PRI GB. Have an SLR but cant run that for spec. If you aren't running a Noveske barrel on a Holland I wouldn't push the specs as hard. You'd always max out at a certain % and would be short of 100% anyways. Just a thought. second this. i'll likely just use a YHM low-pro cause it's steel, cheap, and stays under the handguard. Since i'm going to use the ballistic advantage barrel, as long as it looks recognizable as a holland, minor specs aren't a deal-breaker for me. |
|
|
|
|
Posted: 8/3/2015 11:23:31 AM EDT
[#47]
BA MOD H Barrels for $142 shipped! Use coupon 'save10now' and use the free economy shipping.
This is probably the best deal you'll ever get on a Mod H barrel that performs amazingly well. See group from yesterday below. http://ballisticadvantage.com/16-inch-223-wylde-tacgov-mid-length-ss-premium-barrel-ops12.html 
|
|
|
|
|
Posted: 8/3/2015 11:48:06 AM EDT
[Last Edit: ArmedFerret]
[#48]
Quote HistoryOriginally Posted By Mattyvac:
BA MOD H Barrels for $142 shipped! Use coupon 'save10now' and use the free economy shipping. This is probably the best deal you'll ever get on a Mod H barrel that performs amazingly well. See group from yesterday below. http://ballisticadvantage.com/16-inch-223-wylde-tacgov-mid-length-ss-premium-barrel-ops12.html https://lh3.googleusercontent.com/-ERtt1N62_CA/Vb5fM7v1yLI/AAAAAAAALf0/pzH2DQE4zKk/s800-Ic42/2015_08_02_14_19_26.jpg Yup, just saw the email and snagged one for the wife's recceish build. Since I have a pcs coming up I'll likely wait on mine for my mod H. Seems the ops version is on sale every few months or so. Or if my drill pay hits soon I'll treat myself. |
|
|
|
|
Posted: 8/3/2015 12:18:20 PM EDT
[#49]
Quote HistoryOriginally Posted By ArmedFerret:
Yup, just saw the email and snagged one for the wife's recceish build. Since I have a pcs coming up I'll likely wait on mine for my mod H. Seems the ops version is on sale every few months or so. Or if my drill pay hits soon I'll treat myself. Quote HistoryOriginally Posted By ArmedFerret:
Originally Posted By Mattyvac:
BA MOD H Barrels for $142 shipped! Use coupon 'save10now' and use the free economy shipping. This is probably the best deal you'll ever get on a Mod H barrel that performs amazingly well. See group from yesterday below. http://ballisticadvantage.com/16-inch-223-wylde-tacgov-mid-length-ss-premium-barrel-ops12.html https://lh3.googleusercontent.com/-ERtt1N62_CA/Vb5fM7v1yLI/AAAAAAAALf0/pzH2DQE4zKk/s800-Ic42/2015_08_02_14_19_26.jpg Yup, just saw the email and snagged one for the wife's recceish build. Since I have a pcs coming up I'll likely wait on mine for my mod H. Seems the ops version is on sale every few months or so. Or if my drill pay hits soon I'll treat myself. I'm trying real hard not to press the checkout button
|
|
|
|
|
Posted: 8/3/2015 12:24:12 PM EDT
[#50]
Quote HistoryOriginally Posted By Mattyvac: I'm trying real hard not to press the checkout button Quote HistoryOriginally Posted By Mattyvac: Originally Posted By ArmedFerret: Originally Posted By Mattyvac: BA MOD H Barrels for $142 shipped! Use coupon 'save10now' and use the free economy shipping. This is probably the best deal you'll ever get on a Mod H barrel that performs amazingly well. See group from yesterday below. http://ballisticadvantage.com/16-inch-223-wylde-tacgov-mid-length-ss-premium-barrel-ops12.html https://lh3.googleusercontent.com/-ERtt1N62_CA/Vb5fM7v1yLI/AAAAAAAALf0/pzH2DQE4zKk/s800-Ic42/2015_08_02_14_19_26.jpg Yup, just saw the email and snagged one for the wife's recceish build. Since I have a pcs coming up I'll likely wait on mine for my mod H. Seems the ops version is on sale every few months or so. Or if my drill pay hits soon I'll treat myself. I'm trying real hard not to press the checkout button You should, what with all that money you made selling your 12th and everything else associated with Mk12s.  |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
