User Panel
User Panel
User Panel
|
Posted: 2/13/2014 6:43:24 PM EDT
[#1]
You're not gonna gain much (some, but not a whole lot) railestate by dropping the FSB and using a FF/clamp-on sight. Plus, once you drop the FSB you just deleted the biggest visual factor of a Dissy and you've just got a 16" with a long ass rail.
|
|
|
|
|
Posted: 2/13/2014 7:12:14 PM EDT
[#2]
Well I thought I'd shave weight by using an A2 upper, but I found this spread sheet, if I stay with a flat top and go with a fixed chopped carry handle type if sight, I'd save a couple ounces over the A2 while keeping optics choices open.
https://spreadsheets.google.com/pub?key=tsU_kAjONKoGGfkDPaQZX1Q&single=true&gid=0&output=html |
|
|
|
|
Posted: 2/13/2014 7:16:51 PM EDT
[#3]
Try to find a slick-side A4 and go with MBUS. Probably couldn't get much lighter than that.
|
|
|
|
|
Posted: 2/16/2014 4:47:53 PM EDT
[#4]
Quote HistoryOriginally Posted By packinheavy:
I just ordered a new barrel that looks interesting. http://palmettostatearmory.com/index.php/ar-15-05/upper-parts/barrels/voodoo-innovations-16-5-rifle-length-evo-ultra-lite-750-barrel.html I hope it gets here soon so I can do the build. I am leaving for predeployment training in a couple of weeks. im really interested in hearing more about this barrel. |
|
|
|
|
Posted: 2/16/2014 5:19:46 PM EDT
[#5]
Quote HistoryOriginally Posted By NapeSticksToKids: im really interested in hearing more about this barrel. Quote HistoryOriginally Posted By NapeSticksToKids: Originally Posted By packinheavy: I just ordered a new barrel that looks interesting. http://palmettostatearmory.com/index.php/ar-15-05/upper-parts/barrels/voodoo-innovations-16-5-rifle-length-evo-ultra-lite-750-barrel.html I hope it gets here soon so I can do the build. I am leaving for predeployment training in a couple of weeks. im really interested in hearing more about this barrel.  I will post more info if it gets here before I leave. |
|
|
|
|
Posted: 2/16/2014 5:23:05 PM EDT
[#6]
Quick question guys.
Do you notice much difference in recoil between a fixed or collapsible stock using a rifle gas system? I have both on hand for this new gun but haven't made up my mind on which to use. |
|
|
|
|
Posted: 2/16/2014 5:24:14 PM EDT
[Last Edit: packinheavy]
[#7]
Double tap
|
|
|
|
AL, USA
|
Posted: 2/20/2014 3:58:20 AM EDT
[#8]
My Bushmaster (Windam, ME). I bought the gun back in 09' using the employee discount option. Got it for around 690.00 from the factory, shipped to the store I worked at. It came from the factory in the standard A3 configuration with an A2 stock. It has a full length heavy barrel also. Dissapators are my favorite AR's by far. They look great and I love the way they handle. This is one gun I will never part with. Bushmaster Dissapator Magpul MOE forend, pistol grip and stock Magpul BUIS Magpul AFG 1 Tapco receiver extension (commercial) and 1 point sling mount BCM gunfighter charging handle MOD 3. Which is, imo one of the absolute best upgrade for an AR without spending a lot of money. Vortex Strike Fire 4 moa red dot Vortex Flashhider Primary Arms UWL Gen 2 with tape switch. |
|
|
|
Posted: 2/20/2014 4:08:04 AM EDT
[#9]
Quote HistoryOriginally Posted By valkyrie556x45:
<a href="http://s1198.photobucket.com/user/bamarebel45/media/IMAG1014.jpg.html" target="_blank">http://i1198.photobucket.com/albums/aa441/bamarebel45/IMAG1014.jpg</a> My Bushmaster (Windam, ME). I bought the gun back in 09' using the employee discount option. Got it for around 690.00 from the factory, shipped to the store I worked at. It came from the factory in the standard A3 configuration with an A2 stock. It has a full length heavy barrel also. Dissapators are my favorite AR's by far. They look great and I love the way they handle. This is one gun I will never part with. Bushmaster Dissapator Magpul MOE forend, pistol grip and stock Magpul BUIS Magpul AFG 1 Tapco receiver extension (commercial) and 1 point sling mount BCM gunfighter charging handle MOD 3. Which is, imo one of the absolute best upgrade for an AR without spending a lot of money. Vortex Strike Fire 4 moa red dot Vortex Flashhider Primary Arms UWL Gen 2 with tape switch. Dead sexy 
Don't know what "it" is, but Dissys have it 
|
|
|
|
IL, USA
|
Posted: 2/21/2014 11:49:42 AM EDT
[#10]
Quote HistoryOriginally Posted By valkyrie556x45:
<a href="http://s1198.photobucket.com/user/bamarebel45/media/IMAG1014.jpg.html" target="_blank">http://i1198.photobucket.com/albums/aa441/bamarebel45/IMAG1014.jpg</a> Love it! Inspired me to go back to a fixed front sight on mine. Bought an Armalite clamp-on sight on the EE... This place makes me send so much money! |
|
|
AL, USA
|
Posted: 2/21/2014 6:27:04 PM EDT
[#11]
Quote HistoryOriginally Posted By tkdkracker007:
Love it! Inspired me to go back to a fixed front sight on mine. Bought an Armalite clamp-on sight on the EE... This place makes me send so much money! Quote HistoryOriginally Posted By tkdkracker007:
Originally Posted By valkyrie556x45:
<a href="http://s1198.photobucket.com/user/bamarebel45/media/IMAG1014.jpg.html" target="_blank">http://i1198.photobucket.com/albums/aa441/bamarebel45/IMAG1014.jpg</a> Love it! Inspired me to go back to a fixed front sight on mine. Bought an Armalite clamp-on sight on the EE... This place makes me send so much money! Aint that the truth. A good bit of my tax refund went into that gun. Money well spent I must say. |
|
|
PA, USA
|
Posted: 2/24/2014 11:34:39 AM EDT
[Last Edit: cosmo81]
[#12]
My new build. Changing the stock and not sure if I'm gonna run optics or irons.
|
|
|
|
Posted: 2/24/2014 10:16:35 PM EDT
[#13]
|
|
|
|
|
Posted: 2/24/2014 10:17:38 PM EDT
[#14]
Quote HistoryOriginally Posted By lowonair:
<a href="http://s117.photobucket.com/user/dragginass06/media/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg.html" target="_blank">http://i117.photobucket.com/albums/o80/dragginass06/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg</a> Trying to decide how I'm going to outfit it. Wanna sell it? 
|
|
|
|
|
Posted: 2/24/2014 10:24:48 PM EDT
[#15]
Quote HistoryOriginally Posted By SecretSquirell:
Wanna sell it? Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By lowonair:
<a href="http://s117.photobucket.com/user/dragginass06/media/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg.html" target="_blank">http://i117.photobucket.com/albums/o80/dragginass06/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg</a> Trying to decide how I'm going to outfit it. Wanna sell it? Maybe . No I have to keep this one for now unless spikes releases something else I must have.
|
|
|
|
|
Posted: 2/25/2014 6:39:07 AM EDT
[#16]
Quote HistoryOriginally Posted By lowonair:
<a href="http://s117.photobucket.com/user/dragginass06/media/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg.html" target="_blank">http://i117.photobucket.com/albums/o80/dragginass06/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg</a> Trying to decide how I'm going to outfit it. t1, and a simple BUIS. Keep it light --the rifle excels at it. |
|
|
|
|
Posted: 2/25/2014 10:07:10 AM EDT
[#17]
Quote HistoryOriginally Posted By sgwlower:
t1, and a simple BUIS. Keep it light --the rifle excels at it. Quote HistoryOriginally Posted By sgwlower:
Originally Posted By lowonair:
<a href="http://s117.photobucket.com/user/dragginass06/media/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg.html" target="_blank">http://i117.photobucket.com/albums/o80/dragginass06/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg</a> Trying to decide how I'm going to outfit it. t1, and a simple BUIS. Keep it light --the rifle excels at it. agreed. i swap between a carry handle and a micro red dot w/ MBUS on my dissy. nice and light and fully functional. 
|
|
|
|
|
Posted: 2/25/2014 11:30:48 AM EDT
[#18]
Quote HistoryOriginally Posted By blackhawk400:
agreed. i swap between a carry handle and a micro red dot w/ MBUS on my dissy. nice and light and fully functional. <a href="http://s12.photobucket.com/user/blackhawk400/media/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg</a> <a href="http://s12.photobucket.com/user/blackhawk400/media/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg</a> Quote HistoryOriginally Posted By blackhawk400:
Originally Posted By sgwlower:
Originally Posted By lowonair:
<a href="http://s117.photobucket.com/user/dragginass06/media/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg.html" target="_blank">http://i117.photobucket.com/albums/o80/dragginass06/Mobile%20Uploads/93883F04-69FC-415B-9446-DB3FA257DF7B_zpsurdkiniv.jpg</a> Trying to decide how I'm going to outfit it. t1, and a simple BUIS. Keep it light --the rifle excels at it. agreed. i swap between a carry handle and a micro red dot w/ MBUS on my dissy. nice and light and fully functional. <a href="http://s12.photobucket.com/user/blackhawk400/media/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg</a> <a href="http://s12.photobucket.com/user/blackhawk400/media/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg</a> Got a full pic of the rifle in carry handle config? What color is the finish - titanium? Looks good with the black. |
|
|
|
|
Posted: 2/25/2014 4:25:10 PM EDT
[Last Edit: blackhawk400]
[#19]
Quote HistoryOriginally Posted By Morg308:
agreed. i swap between a carry handle and a micro red dot w/ MBUS on my dissy. nice and light and fully functional. <a href="http://s12.photobucket.com/user/blackhawk400/media/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/1FF24C54-8C45-43E1-BC69-66FE9EAD3EFB_zpsb6di8zgj.jpg</a> <a href="http://s12.photobucket.com/user/blackhawk400/media/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg.html" target="_blank">http://i12.photobucket.com/albums/a205/blackhawk400/66D09A31-E0DA-4D05-A83E-1E2073A59839_zpsfualox4w.jpg</a> Got a full pic of the rifle in carry handle config? What color is the finish - titanium? Looks good with the black. the color is stainless from Cerakote (oven cure). the carry handle needs some cleaning, got it well used and never bothered to clean it up. the best part is that the balance on this thing is directly on the delta ring. so both my grips are pretty much equidistant from the center point meaning this thing feels perfect in hand. 
|
|
|
|
|
Posted: 2/28/2014 9:48:06 AM EDT
[#20]
Okay, that barrel finally came in the other day. But I am leaving for more training tomorrow and then will be going directly overseas so it won't be built for a bit.
I think I will go all out on this build and order the parts while I am gone. That Evo barrel and the following is what I have in mind. Compact ACOG in a Larue mount that I already have. One of the solid trigger guard lowers that are available from a couple of different companies(not a billet lower) Flat top upper. M5 RAS (not high speed, but I like them) A.R.M.S. folding front sight Fixed stock of some sort Lightweight LED light of some kind. Folding rear back up sight of some sort(usually use Matechs since I use them at work, but we will see) Not sure on the muzzle device yet, but I may just go with an A2 to keep it short. Good aftermarket trigger kit of some sort as well. |
|
|
|
|
Posted: 2/28/2014 11:26:10 AM EDT
[#21]
Quote HistoryOriginally Posted By packinheavy:
Okay, that barrel finally came in the other day. But I am leaving for more training tomorrow and then will be going directly overseas so it won't be built for a bit.
I think I will go all out on this build and order the parts while I am gone. That Evo barrel and the following is what I have in mind. Compact ACOG in a Larue mount that I already have. One of the solid trigger guard lowers that are available from a couple of different companies(not a billet lower) Flat top upper. M5 RAS (not high speed, but I like them) A.R.M.S. folding front sight Fixed stock of some sort Lightweight LED light of some kind. Folding rear back up sight of some sort(usually use Matechs since I use them at work, but we will see) Not sure on the muzzle device yet, but I may just go with an A2 to keep it short. Good aftermarket trigger kit of some sort as well. The voodoo barrel? Does it have cutouts for the pins for an fsb? |
|
|
|
|
Posted: 2/28/2014 11:44:09 AM EDT
[#22]
Quote HistoryOriginally Posted By NapeSticksToKids:
The voodoo barrel? Does it have cutouts for the pins for an fsb? Quote HistoryOriginally Posted By NapeSticksToKids:
Originally Posted By packinheavy:
Okay, that barrel finally came in the other day. But I am leaving for more training tomorrow and then will be going directly overseas so it won't be built for a bit.
I think I will go all out on this build and order the parts while I am gone. That Evo barrel and the following is what I have in mind. Compact ACOG in a Larue mount that I already have. One of the solid trigger guard lowers that are available from a couple of different companies(not a billet lower) Flat top upper. M5 RAS (not high speed, but I like them) A.R.M.S. folding front sight Fixed stock of some sort Lightweight LED light of some kind. Folding rear back up sight of some sort(usually use Matechs since I use them at work, but we will see) Not sure on the muzzle device yet, but I may just go with an A2 to keep it short. Good aftermarket trigger kit of some sort as well. The voodoo barrel? Does it have cutouts for the pins for an fsb? Yep, it came in earlier in the week when I was out. No cutouts on it. It will require a clamp on gas block or front sight. |
|
|
|
AL, USA
|
Posted: 2/28/2014 4:20:25 PM EDT
[#23]
http://i1198.photobucket.com/albums/aa441/bamarebel45/IMAG1045.jpg
I need remember to get some action shots with it next time I shoot it. |
|
|
|
Posted: 2/28/2014 7:38:31 PM EDT
[#24]
Quote HistoryOriginally Posted By valkyrie556x45:
<a href="http://s1198.photobucket.com/user/bamarebel45/media/IMAG1045.jpg.html" target="_blank">http://i1198.photobucket.com/albums/aa441/bamarebel45/IMAG1045.jpg</a> I need remember to get some action shots with it next time I shoot it. Great paint job BTW. Looks a lot like A-TACS. I like it a lot. What colors did you use? |
|
|
|
AL, USA
|
Posted: 2/28/2014 8:41:09 PM EDT
[#25]
I have been using the Rustoleum camo paint. I do a base coat of Deep Forest Green. Usually 2-3 light coats and I use a heat gun to dry the paint. Then I do random swipes using Army Green (the lighter green) and Earth Brown. I ran out of the brown when I painted a different gun so I haven't been able to spray any on the Dissapator. I don't really do any metal prep other than wiping the gun down and taping off any areas the paint could get in the receiver. I then just hang the gun, spray it and use a heat gun in between coats to accelerate the curing process. I then try to let the gun sit for about a week before really using it to allow the paint to properly dry. That makes a big difference in reducing the wear.
|
|
|
|
Posted: 2/28/2014 9:22:27 PM EDT
[#26]
Quote HistoryOriginally Posted By valkyrie556x45:
I have been using the Rustoleum camo paint. I do a base coat of Deep Forest Green. Usually 2-3 light coats and I use a heat gun to dry the paint. Then I do random swipes using Army Green (the lighter green) and Earth Brown. I ran out of the brown when I painted a different gun so I haven't been able to spray any on the Dissapator. I don't really do any metal prep other than wiping the gun down and taping off any areas the paint could get in the receiver. I then just hang the gun, spray it and use a heat gun in between coats to accelerate the curing process. I then try to let the gun sit for about a week before really using it to allow the paint to properly dry. That makes a big difference in reducing the wear. The combination looks greyish. Someone here did a light dusting with FDE and it came out greyish. I won't do any painting until this summer, then I will do it on the roof and let it cook in the sun. AZ has it's advantages. 
|
|
|
|
OH, USA
|
Posted: 2/28/2014 9:43:11 PM EDT
[#27]
|
|
|
AL, USA
|
Posted: 2/28/2014 10:20:44 PM EDT
[#28]
Quote HistoryOriginally Posted By Morg308:
The combination looks greyish. Someone here did a light dusting with FDE and it came out greyish. I won't do any painting until this summer, then I will do it on the roof and let it cook in the sun. AZ has it's advantages. Quote HistoryOriginally Posted By Morg308:
Originally Posted By valkyrie556x45:
I have been using the Rustoleum camo paint. I do a base coat of Deep Forest Green. Usually 2-3 light coats and I use a heat gun to dry the paint. Then I do random swipes using Army Green (the lighter green) and Earth Brown. I ran out of the brown when I painted a different gun so I haven't been able to spray any on the Dissapator. I don't really do any metal prep other than wiping the gun down and taping off any areas the paint could get in the receiver. I then just hang the gun, spray it and use a heat gun in between coats to accelerate the curing process. I then try to let the gun sit for about a week before really using it to allow the paint to properly dry. That makes a big difference in reducing the wear. The combination looks greyish. Someone here did a light dusting with FDE and it came out greyish. I won't do any painting until this summer, then I will do it on the roof and let it cook in the sun. AZ has it's advantages. I think the camera makes it look more greyish than it really is. This is the second time I have painted it. I just added a bunch of new stuff to it, so I just painted the whole gun again. There was brown on the previous coat and I tried to get it to show up a bit. In person it is definitely got more of a green hue than what the pictures show. Ill try to get some in direct sunlight while shooting and maybe that will show up better. I have also found that a light clear coat makes the colors contrast better, but can make the gun rather glossy if you use to much. |
|
|
IL, USA
|
Posted: 3/3/2014 1:43:28 AM EDT
[#29]
|
|
|
|
Posted: 3/3/2014 6:04:20 PM EDT
[#30]
Quote HistoryOriginally Posted By Col_Cotton_Hill:
Here's mine I did a year or so ago. Just a repost cause I really like this pic. 
<a href="http://s479.photobucket.com/user/Col_Cotton_Hill/media/Dissy%20build/onthemap_zps068d341f.jpg.html" target="_blank">http://i479.photobucket.com/albums/rr153/Col_Cotton_Hill/Dissy%20build/onthemap_zps068d341f.jpg</a> Thats pretty cool
|
|
|
|
KY, USA
|
Posted: 3/4/2014 11:26:54 PM EDT
[#31]
|
|
|
USA
|
Posted: 3/5/2014 12:06:34 AM EDT
[Last Edit: Scuds03]
[#32]
|
|
|
CA, USA
|
Posted: 3/7/2014 2:36:43 AM EDT
[#33]
What type of rail are you running. I have a Dissipator on the way and I'm looking for options. I like the profile on yours.
|
|
|
|
Posted: 3/7/2014 9:54:36 AM EDT
[#34]
Assuming you're speaking to scuds, that's the rigle length Magpul MOE forearm. I have it on mine as well, and I've been very satisfied with it. It's comfortable and a very decent price. If you're the kind of guy that needs rails all down the gun, it's not for you, but there's slots to add sling mounts, vertical grips, and light mounts.
|
|
|
|
USA
|
Posted: 3/8/2014 1:05:29 AM EDT
[#35]
As stated above, rifle length MAGPUL MOE handguard. Great handguad for the $$. You cant see it in the photo but on the opposite side I have a small TLR-3 light mounted on a 5 slot rail piece.
|
|
|
|
Posted: 3/11/2014 7:07:18 PM EDT
[#36]
Put one together from a bunch of spare parts. I really like it
] 
|
|
|
|
OH, USA
|
Posted: 3/14/2014 5:27:12 PM EDT
[#37]
So I’m kicking around the idea of assembly a “Dissipator” upper and I have a question.
Using a barrel that is .750 at the gas port area (it’s not a bull barrel), it would have to be turned down to .625 at the end of the barrel near the muzzle threads to install a FSB, so then I would need to use a .625 FSB with a flat top, right? |
|
|
MD, USA
|
Posted: 3/15/2014 10:14:35 AM EDT
[#38]
|
|
|
|
Posted: 3/15/2014 10:45:20 AM EDT
[#39]
Quote HistoryOriginally Posted By wayne1one:
[email=http://www.flickr.com/photos/98338002@N04/13167317325/]http://farm8.staticflickr.com/7301/13167317325_dfe183ff92_b.jpg[/email] IMG_5644 by 556 Channel (HD), on Flickr [email=http://www.flickr.com/photos/98338002@N04/13167318195/]http://farm3.staticflickr.com/2560/13167318195_637b0a1949_b.jpg[/email] IMG_5641 by 556 Channel (HD), on Flickr Nice rifle!!! Specs? |
|
|
|
MD, USA
|
Posted: 3/15/2014 11:33:19 AM EDT
[#40]
Engage Billet Upper
Engage Billet Lower 16" White Oak Armament heavy profile barrel BCM Mod 4 Charging handle NiB Mil-spec BCG -223 Wylde Chamber -1/7 Twist A2 Flash Hider Magpul full length handguard (pictured) or Fortis 12" rail ALG ACT Trigger Magpul flip-up rear sight (pictured) or Daniel Defense fixed rear sight Vltor Buffer Tube with B5 Systems stock (pictured) or: Magpul fixed stock, A2 fixed stock |
|
|
USA
|
Posted: 3/15/2014 2:06:24 PM EDT
[#41]
Just for piece of mind I double checked the barrel nut torque on my Spike's Dissy upper. Broke at about 65ft/lbs...GTG. I do this on all my uppers now as I have received under torqued ones before from reputable names. best QC is your own QC. Phone pics
|
|
|
AZ, USA
|
Posted: 4/17/2014 12:50:32 AM EDT
[#42]
Been a month since any post, I'm tweaking for more Dissy pics so........ BUMP!
Eli |
|
|
PA, USA
|
Posted: 4/17/2014 9:58:46 AM EDT
[#43]
Not sure if I'll be keeping this, the NFA bug has bit hard and could possibly turn into a 300blk SBR. What does the hive think? |
|
|
|
Posted: 4/17/2014 12:49:15 PM EDT
[#44]
Quote HistoryOriginally Posted By jr1092:
http://i49.photobucket.com/albums/f267/jr1092/dissy_zps79196b28.jpg Not sure if I'll be keeping this, the NFA bug has bit hard and could possibly turn into a 300blk SBR. What does the hive think? That's very similar to the dissipator build I had in mind, so I'd say it's a nice build and you should keep it, as well as get a 300 BLK upper to go on it. |
|
|
|
TN, USA
|
Posted: 4/25/2014 8:54:17 AM EDT
[Last Edit: twpayne75]
[#45]
|
|
|
|
Posted: 4/25/2014 11:48:58 AM EDT
[#46]
Just a heads up that PSA has some uppers in stock. http://palmettostatearmory.com/index.php/nra-show-sale/uppers/psa-16-mid-length-dissipator-without-bcg-or-charging-handle.html
|
|
|
|
MA, USA
|
Posted: 4/26/2014 1:17:00 PM EDT
[#47]
First contribution. 14.5" "dissipator"
|
|
|
|
Posted: 4/26/2014 3:01:28 PM EDT
[#48]
 " />
|
|
|
|
|
Posted: 4/26/2014 3:43:51 PM EDT
[#49]
Quote HistoryOriginally Posted By kdong:
First contribution. 14.5" "dissipator" http://i72.photobucket.com/albums/i179/kduangsay/Mobile%20Uploads/20140426_000920_zpsqv0srwqy.jpg nice! specs and more pics please! |
|
|
|
MA, USA
|
Posted: 4/26/2014 3:58:36 PM EDT
[Last Edit: kdong]
[#50]
Quote HistoryOriginally Posted By egress81:
nice! specs and more pics please! Quote HistoryOriginally Posted By egress81:
Originally Posted By kdong:
First contribution. 14.5" "dissipator" http://i72.photobucket.com/albums/i179/kduangsay/Mobile%20Uploads/20140426_000920_zpsqv0srwqy.jpg nice! specs and more pics please! I'll try to get some more pics tonight Aero Precision upper and lower Spikes BCG Spikes 14.5" Mid-Length lightweight barrel Rainier XTC Parallax tactical 11.5" FFSSR Magpul BUIS Armalite clamp on front sight base MFT minimalist stock Magpul K2 grip It's really front heavy with the minimalist stock, so I might swap it for something a bit bulkier. Not really sure yet. As it sits right now with an empty mag it's right at 6.5 lbs. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
