User Panel
Originally Posted By spdrcrgts:
That’s an interesting observation. I noticed the similarity to my 308 MAMS when I was removing the Mini MAMS and checking it for previous pin, but it didn’t click that it was different than my other Gen1 Mini MAMS that is pinned on my Carbine upper (which has the two flats). So many intricacies with KAC parts. View Quote View All Quotes View All Quotes Originally Posted By spdrcrgts:
Originally Posted By 871JZ:
I'm sure many of you may already be familiar with this information, but I never realized until now that there was some variation in the design of the first generation 5.56 MAMS. Some have four wrench flats (square back), like that of the 7.62 version, and others have only two wrench flats. For example, my newly acquired Gen 1 MAMS has two wrench flats just like all of my Gen 2's have had. I'm assuming that maybe the early Gen 1's were the four flat versions, then later on KAC changed the design to the two flat version, which carried over into the design of the Gen 2's. Here's a pic of mine. Notice only two wrench flats. https://www.AR15.Com/media/mediaFiles/363550/20181108_200248_jpg-732598.JPG Here's a pic of a Gen 2 that I recently sold. Notice it also has two flats. https://www.AR15.Com/media/mediaFiles/363550/20181108_200234_jpg-732600.JPG And then here's another Gen 1. Notice the four flats, or square back design, like that of the 7.62 MAMS. Hopefully, @spdrcrgts doesn't mind me using his photo for this comparison. https://www.AR15.Com/media/mediaFiles/363550/20181108_201216_jpg-732606.JPG Last pic is of a 7.62 MAMS, just to show the similarity of the back end between it, and (what I assume to be the earlier) Gen 1 5.56 MAMS in the pic above. https://www.AR15.Com/media/mediaFiles/363550/20181108_201617_jpg-732612.JPG For those of you already familiar with the differences in the Gen 1 MAMS, can you give anymore information? Am I correct in my assumption that the four flat was the earlier model, and the two flat was the later one? Was one version out produced or old sold by the other, or is one more difficult to find or more sought after? |
|
|
Originally Posted By 871JZ: Yeah, but that's why I mentioned the QDC flash hiders and the Mod 1's. You said the picture of the KAC catalog was from 2012, and it shows the QDC flash hider in it, but that was well before the Mod 2's came out, so why didn't we see the QDC flash hiders on Mod 1's? Unless I'm missing something here, which is very possible! ETA: Nevermind! I see what you're saying now. The QDC stuff was around in 2012, it just wasn't available yet. I knew I wasn't getting the big picture there. After rereading your post I picked up on it. Lol. So you added the Gen 1 MAMS to your Mod 1, it didn't come with it, right? View Quote Mod2 is when Kac starting to use a QDC FH and was suppressor ready. Originally Posted By spdrcrgts: Got your message. It’s yours. I’ll reply shortly. View Quote |
|
|
Originally Posted By 871JZ: It is interesting. I believe it's much less common then the two flat Gen 1's. I've been looking through pics of Gen 1's for the last 30 minutes and haven't spotted another four flat version yet. Not one. They're all two flatters. Looks like @swiftimproved220 grabbed a sweet piece with this one. Will be an excellent addition to his collection. View Quote Edit- have the perfect home for it on my mod1 Carbine upper. |
|
|
Originally Posted By swiftimproved220:
Yep I added the mams to my mod1 rifle. It came with the birdcage style FH. To my knowledge all mod1’s came with the birdcage FH. Only exception is the SR16 that came with the NT4 FH. Mod2 is when Kac starting to use a QDC FH and was suppressor ready. Thank you Sir. Your MO will be mailed today. View Quote Originally Posted By swiftimproved220: 100% agree the four wrench flat is differently an uncommon version and will be cherished in my collection. Thanks again Edit- have the perfect home for it on my mod1 Carbine upper. View Quote |
|
|
|
Originally Posted By MNRidesHonda:
My dad gave me a Colt A2 upper +bcg and hand guards so I turned it into a late USMC XM4 with a few subtle KAC goodies/upgrades. Test fired, BZO-ed for M855, and was ringing 10"x19" steel plate at 300m with it yesterday KAC parts are: - Old gen NT4 flash hider - 2 stage trigger from one of my SR25s - Detroit PD trade in QDSS NT4 that I use for beater/demo https://i.imgur.com/uFYEHBa.jpg https://i.imgur.com/c1UNPTa.jpg https://i.imgur.com/y7Du5yY.jpg https://i.imgur.com/EYGvVHN.jpg View Quote |
|
|
I got a conex right now on my mind and I chugged myself blind.
To the sound of old C-War To the sound of old C-War, who's next? |
Originally Posted By swiftimproved220:
Yep, mod1 is dimpled. Mod2 isn’t. https://www.AR15.Com/media/mediaFiles/468215/515FA3A4-DBD4-4E01-A227-A898A27DCB4E-719232.jpg https://www.AR15.Com/media/mediaFiles/468215/D75DA9FC-3934-49C6-88F0-09427A1B3F79-719231.jpg View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Originally Posted By 871JZ: Dimpled? Sweet either way! https://www.AR15.Com/media/mediaFiles/468215/515FA3A4-DBD4-4E01-A227-A898A27DCB4E-719232.jpg https://www.AR15.Com/media/mediaFiles/468215/D75DA9FC-3934-49C6-88F0-09427A1B3F79-719231.jpg |
|
|
Originally Posted By MNRidesHonda:
My dad gave me a Colt A2 upper +bcg and hand guards so I turned it into a late USMC XM4 with a few subtle KAC goodies/upgrades. Test fired, BZO-ed for M855, and was ringing 10"x19" steel plate at 300m with it yesterday KAC parts are: - Old gen NT4 flash hider - 2 stage trigger from one of my SR25s - Detroit PD trade in QDSS NT4 that I use for beater/demo https://i.imgur.com/uFYEHBa.jpg https://i.imgur.com/c1UNPTa.jpg https://i.imgur.com/y7Du5yY.jpg https://i.imgur.com/EYGvVHN.jpg View Quote |
|
|
Hey what would you guys consider a good price on an SR25 lower used? Looking for what price point you should scoop up if you see it.
Any differences in sr25 lowers, anything to watch for? |
|
|
Originally Posted By Outrider: Love a good KISS rifle. View Quote That is a cool rifle MNRidesHonda. It reminds me of a gun I saw NickOTime show a couple years ago with a lightweight barrel, carry handle, and black NT-4. I found the archived thread. |
|
|
Originally Posted By RustedAce:
https://www.AR15.Com/media/mediaFiles/47980/1A6252F6-98B2-48D5-A0CE-C39CA009E511-733062.jpg View Quote Originally Posted By 871JZ: Very nice. Now that I see it, I think I remember the EE ad from when you bought. It was a complete rifle with a QD cup lower, and it was a pretty good price if I remember correctly. Unless this is a different one, then excuse me. View Quote |
|
|
Originally Posted By swiftimproved220:
Very nice rifle! URX3 with that gas block is hot. Plus them dimples. Bet it’s a real shooter too and that can for the win! Yep you remember correctly. Just got another upper though and will probably use that sbr QD cup lower on it instead. View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Originally Posted By RustedAce:
https://www.AR15.Com/media/mediaFiles/47980/1A6252F6-98B2-48D5-A0CE-C39CA009E511-733062.jpg Originally Posted By 871JZ: Very nice. Now that I see it, I think I remember the EE ad from when you bought. It was a complete rifle with a QD cup lower, and it was a pretty good price if I remember correctly. Unless this is a different one, then excuse me. Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. Attached File I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. Attached File Attached File |
|
|
Originally Posted By 871JZ: Sweet. What's the new upper? Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. https://www.AR15.Com/media/mediaFiles/363550/20181110_215059_jpg-734865.JPG I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. https://www.AR15.Com/media/mediaFiles/363550/20181110_215633_jpg-734871.JPG https://www.AR15.Com/media/mediaFiles/363550/20181110_215749_jpg-734873.JPG View Quote Nice about already getting a replacement mams and keeping that prestine G1 for your collection. It’s common the black finish is removed over time by cleaning the carbon off. Here’s the new to me upper I spoke of. Great add to my small collection! |
|
|
Originally Posted By swiftimproved220:
@871JZ Nice about already getting a replacement mams and keeping that prestine G1 for your collection. It’s common the black finish is removed over time by cleaning the carbon off. Here’s the new to me upper I spoke of. Great add to my small collection! https://www.AR15.Com/media/mediaFiles/468215/E55E5EE5-9766-4068-8C53-6AEE7C7A7BC2-735159.jpg View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Originally Posted By 871JZ: Sweet. What's the new upper? Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. https://www.AR15.Com/media/mediaFiles/363550/20181110_215059_jpg-734865.JPG I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. https://www.AR15.Com/media/mediaFiles/363550/20181110_215633_jpg-734871.JPG https://www.AR15.Com/media/mediaFiles/363550/20181110_215749_jpg-734873.JPG Nice about already getting a replacement mams and keeping that prestine G1 for your collection. It’s common the black finish is removed over time by cleaning the carbon off. Here’s the new to me upper I spoke of. Great add to my small collection! https://www.AR15.Com/media/mediaFiles/468215/E55E5EE5-9766-4068-8C53-6AEE7C7A7BC2-735159.jpg And, man, sweet pick-up on the new upper! That is an incredible addition to your collection. Are you planning on registering another lower to replace the one you had the dimpled upper on since it'll be paired with the new upper? Two QD cup lowers would make for great pics with both of these beautiful/rare uppers installed. Seeing those pics of your dimpled upper reminds me that I've literally been planning for months and months to send my Mod 2 barrel out to Marvin for dimpling, but I just haven't done it yet. I keep making excuses because I don't wanna be without it for 6-8 weeks. What I really want is a dimpled Mod 1 Carbine upper like yours, I'm just waiting for one to pop up in the price range I'd like to pay. |
|
|
Originally Posted By 871JZ: Yeah, I've seen some MAMS that were copper colored, which I assumed was from cleaning. This one was the first I'd seen that was silver. Looked cool, but once it was mounted it stood out like a sore thumb. Lol And, man, sweet pick-up on the new upper! That is an incredible addition to your collection. Are you planning on registering another lower to replace the one you had the dimpled upper on since it'll be paired with the new upper? Two QD cup lowers would make for great pics with both of these beautiful/rare uppers installed. Seeing those pics of your dimpled upper reminds me that I've literally been planning for months and months to send my Mod 2 barrel out to Marvin for dimpling, but I just haven't done it yet. I keep making excuses because I don't wanna be without it for 6-8 weeks. What I really want is a dimpled Mod 1 Carbine upper like yours, I'm just waiting for one to pop up in the price range I'd like to pay. View Quote Thanks about the upper. I don’t plan on getting another lower. Got quite a few that are SBR’s but there the newer style. And it’s fine because I have at least one now. The QD cup lower’s form 4 technically has the 14.5 barrel length on it. And I don’t plan to change that. Just will keep the carbine upper off on the shelf and keep the fsgb upper on the lower. Easy to change around if I need to. |
|
|
Originally Posted By swiftimproved220:
Yeah the brass color you seen in the past is probably from using a brass bristle brush. Good bore cleaner will remove the brass color. Thanks about the upper. I don’t plan on getting another lower. Got quite a few that are SBR’s but there the newer style. And it’s fine because I have at least one now. The QD cup lower’s form 4 technically has the 14.5 barrel length on it. And I don’t plan to change that. Just will keep the carbine upper off on the shelf and keep the fsgb upper on the lower. Easy to change around if I need to. View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Originally Posted By 871JZ: Yeah, I've seen some MAMS that were copper colored, which I assumed was from cleaning. This one was the first I'd seen that was silver. Looked cool, but once it was mounted it stood out like a sore thumb. Lol And, man, sweet pick-up on the new upper! That is an incredible addition to your collection. Are you planning on registering another lower to replace the one you had the dimpled upper on since it'll be paired with the new upper? Two QD cup lowers would make for great pics with both of these beautiful/rare uppers installed. Seeing those pics of your dimpled upper reminds me that I've literally been planning for months and months to send my Mod 2 barrel out to Marvin for dimpling, but I just haven't done it yet. I keep making excuses because I don't wanna be without it for 6-8 weeks. What I really want is a dimpled Mod 1 Carbine upper like yours, I'm just waiting for one to pop up in the price range I'd like to pay. Thanks about the upper. I don’t plan on getting another lower. Got quite a few that are SBR’s but there the newer style. And it’s fine because I have at least one now. The QD cup lower’s form 4 technically has the 14.5 barrel length on it. And I don’t plan to change that. Just will keep the carbine upper off on the shelf and keep the fsgb upper on the lower. Easy to change around if I need to. |
|
|
|
|
|
Originally Posted By 871JZ:
Older pic that I may have posted before. https://www.AR15.Com/media/mediaFiles/363550/20181111_181443_jpg-735694.JPG View Quote |
|
|
Originally Posted By swiftimproved220:
Really like that and can’t say I’ve seen that stock used on a factory Kac rifle. Something about the stock being so minimal and old school makes it look right. View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Originally Posted By 871JZ:
Older pic that I may have posted before. https://www.AR15.Com/media/mediaFiles/363550/20181111_181443_jpg-735694.JPG |
|
|
Originally Posted By 871JZ: Older pic that I may have posted before. https://www.AR15.Com/media/mediaFiles/363550/20181111_181443_jpg-735694.JPG View Quote I like the clean perpendicular lines of that rifle. Big fan of the EMAG too. |
|
|
KAC 11.5
Still need some better glass, hoping I can come up on something decent on Black Friday Attached File |
|
|
|
Originally Posted By 871JZ:
Beautiful, sir. Love the Volk's, too. View Quote View All Quotes View All Quotes Originally Posted By 871JZ:
Originally Posted By MNRidesHonda:
https://i.imgur.com/h0lTPi1.jpg https://i.imgur.com/9fNhzgi.jpg https://i.imgur.com/Eha65Aq.jpg https://i.imgur.com/qQ5k8n4.jpg |
|
Freedom is not Free..
Gun Gallery 4 Life: "Selling Guns, Changing People's Lives" IG: 2A_Patriots and HotBrass365 / HotBrass365crew |
Originally Posted By M4ger:
Very nice. I like the clean perpendicular lines of that rifle. Big fan of the EMAG too. View Quote Originally Posted By loudxpack:
KAC 11.5 Still need some better glass, hoping I can come up on something decent on Black Friday https://www.AR15.Com/media/mediaFiles/472230/57CFBDE6-A126-4525-B3B4-E15FFB9E22AD_jpeg-737865.JPG View Quote Hoping to grab some good stuff on BF. |
|
|
Echo Company 2nd Battalion 9th Marines
India Company 3rd Battalion 8th Marines |
|
|
I've always loved the look of the 99051 front sights. They have a very classic look, IMO.
Attached File |
|
|
|
Originally Posted By 871JZ:
Sweet. What's the new upper? Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. https://www.AR15.Com/media/mediaFiles/363550/20181110_215059_jpg-734865.JPG I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. https://www.AR15.Com/media/mediaFiles/363550/20181110_215633_jpg-734871.JPG https://www.AR15.Com/media/mediaFiles/363550/20181110_215749_jpg-734873.JPG View Quote View All Quotes View All Quotes Originally Posted By 871JZ:
Originally Posted By swiftimproved220:
Originally Posted By RustedAce:
https://www.AR15.Com/media/mediaFiles/47980/1A6252F6-98B2-48D5-A0CE-C39CA009E511-733062.jpg Originally Posted By 871JZ: Very nice. Now that I see it, I think I remember the EE ad from when you bought. It was a complete rifle with a QD cup lower, and it was a pretty good price if I remember correctly. Unless this is a different one, then excuse me. Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. https://www.AR15.Com/media/mediaFiles/363550/20181110_215059_jpg-734865.JPG I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. https://www.AR15.Com/media/mediaFiles/363550/20181110_215633_jpg-734871.JPG https://www.AR15.Com/media/mediaFiles/363550/20181110_215749_jpg-734873.JPG |
|
|
Originally Posted By DefenderAO:
My KAC front sight looks the same from my MAMS. Discolored...I love it View Quote View All Quotes View All Quotes Originally Posted By DefenderAO:
Originally Posted By 871JZ:
Originally Posted By swiftimproved220:
Originally Posted By RustedAce:
https://www.AR15.Com/media/mediaFiles/47980/1A6252F6-98B2-48D5-A0CE-C39CA009E511-733062.jpg Originally Posted By 871JZ: Very nice. Now that I see it, I think I remember the EE ad from when you bought. It was a complete rifle with a QD cup lower, and it was a pretty good price if I remember correctly. Unless this is a different one, then excuse me. Grabbed another G2 MAMS to replace the G1. Figured I'd just add the G1 to the collection instead of using it since it's in such nice condition. Once in awhile it's nice to try and preserve something instead of wearing it out. Lol Terrible pics, but here's the replacement. Not sure what one of the previous owners did to this thing, but as this pic shows, it was damn near raw stainless when I received it. https://www.AR15.Com/media/mediaFiles/363550/20181110_215059_jpg-734865.JPG I cleaned and degreased it and went over it with a cold blue pen in an attempt to bring the normal color back. Still shows a lot of wear which is fine by me, but it looks much better now in comparison to before. As a side note, cold blue pens work much better on non-stainless metals. It took a few treatments with the cold blue to get it to this point, with it darkening a little more with each coloring. https://www.AR15.Com/media/mediaFiles/363550/20181110_215633_jpg-734871.JPG https://www.AR15.Com/media/mediaFiles/363550/20181110_215749_jpg-734873.JPG |
|
|
|
Originally Posted By Outrider:
https://i.imgur.com/Mmt8sZP.jpg https://i.imgur.com/MLmWuoZ.jpg https://i.imgur.com/Ycg0jk7.jpg https://i.imgur.com/XS7iFK6.jpg View Quote |
|
|
Originally Posted By swiftimproved220:
Nice sticks! What can is on that BLK rifle? View Quote |
|
|
Had a really good day. Got her all sighted in @ 100 and was making very consistent shots @ 500 when prone with bipod. That 11.5” was putting in work and surprised me at that range!
Attached File Attached File Attached File Attached File Attached File |
|
|
Originally Posted By swiftimproved220:
Nice, I’m not familiar with them but I bet it’s very quiet. Here’s my Liberty Leonidas. It’s an integral style upper. Can is huge and the gas is reflexed back over the barrel and gas block. It’s the quietest CF rifle I own with both super or subs. 300BLK cal https://www.AR15.Com/media/mediaFiles/468215/3A1E4B39-CA55-47A4-AC8B-4CF240B6AA85-356731.jpg https://www.AR15.Com/media/mediaFiles/468215/FA6BE040-B1CD-44CC-BF04-268197C3DB19-356733.jpg https://www.AR15.Com/media/mediaFiles/468215/DDBE574F-A726-4A2D-B7BE-12235DD5D77B-356734.jpg https://www.AR15.Com/media/mediaFiles/468215/F6C85B2F-6B2C-4540-9D68-E0CB8CF1D663-356736.jpg https://www.AR15.Com/media/mediaFiles/468215/0F1C577F-BF6A-45A9-8DEF-44BA2DD68FF1-356738.jpg View Quote And the Liberty Leonidas is fantastic. At that same shoot I had an opportunity to shoot it and was very impressed. My first cans were a Liberty Mystic X and Regulator. Liberty makes some good stuff. |
|
|
Originally Posted By Outrider: Sig's silencer division was lead by Kevin Brittingham (AAC founder) for a short time before they split ways. His current company Q is doing some of the same stuff in terms of large OD (1.75") fully welded/no tube titanium silencers. The large volume cans excel with low pressure subsonic. And the Liberty Leonidas is fantastic. At that same shoot I had an opportunity to shoot it and was very impressed. My first cans were a Liberty Mystic X and Regulator. Liberty makes some good stuff. View Quote |
|
|
Originally Posted By TannerB:
Here ya go. https://farm2.staticflickr.com/1902/31732856018_2a7da18a09_c.jpgUntitled by T B, on Flickr https://farm2.staticflickr.com/1937/43787506980_91fb769dc7_c.jpgUntitled by T B, on Flickr https://farm2.staticflickr.com/1919/43787507180_40efa957d6_c.jpgUntitled by T B, on Flickr https://farm2.staticflickr.com/1962/30664275787_49e445d0aa_c.jpgUntitled by T B, on Flickr https://farm2.staticflickr.com/1956/30667627297_3cb84f0be0_c.jpgUntitled by T B, on Flickr https://farm2.staticflickr.com/1972/30667628437_e89034cacd_c.jpgUntitled by T B, on Flickr View Quote Awesome guns, thanks. |
|
|
Why does the Knights low profile gas block rest on the interior of the URX II rail? I put together the SBR that I’ve wanted but the parts don’t seem to work together well. Kinda defeats the purpose of a free float rail...
|
|
|
|
Originally Posted By M4ger:
https://www.AR15.Com/media/mediaFiles/401845/PB200002-1280_jpg-745486.JPG https://www.AR15.Com/media/mediaFiles/401845/PB200004-1280_jpg-745487.JPG View Quote |
|
|
Originally Posted By swiftimproved220:
Soooo noice! View Quote View All Quotes View All Quotes Originally Posted By swiftimproved220:
Soooo noice! |
|
|
|
|
Originally Posted By oldbrowndog:
https://i.imgur.com/qyOhWiX.jpg?1 SR-16 on a built SR-15 stripped lower LMT LPK, Forward Controls Ambi Mag Release and Bolt Catch, VLTOR A5 buffer system, Geissele SSP Aimpoint Comp M5 on a Scalarworks Lower 1/3 LDM First KAC, it's my new favorite View Quote i hope to acquire one of the sr16 upper's one of these days |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.