User Panel
User Panel
User Panel
|
Posted: 12/17/2007 9:49:47 PM EDT
[Last Edit: new-arguy]
Im sure there's been a thread like this here before, but I dont know where it is or where its gone to. There's a URX pic thread, but a lot of us, and a lot of you have other KAC gear equipped guns that are just as nice. So this thread is for allof you/us! People interested in KAC gear can check it out and ask.
If you have guns with a fair amount of KAC gear, lets see them, this is the place to post them. MK11, MK12 Mod1, MK18s, URX, FF RAS, RAS/RIS, MRE's (a cult classic!), KAC cans, whole guns, lets see them! I've got a few more at work I'd like to snap pics of tomorrow, but I'll start today with a few of my own. First the new one. SBR'd KAC SR15, lots of Knights gear on this one:  My most used gun as of the last two or three years. Another KAC SR15 built into a Recce clone. Lots more KAC goodness there!  My 6.8 SPRish URX gun. I'd like to find another SR15 to rebuild this one on, probably with a little shorter barrel next time.  My old MRE gun, this one is being reconfigured at the moment...  Here's some from yesterday on the range. Between chromeluv, myself and another friend of ours who is not on the site, there was a lot of KAC guns one the range. Friend of ours shooting his new SR15 E3 carbine Another friend shooting chromeluvs SR15 URX gun with KAC can chromeluv shooting the new KAC E3 carbine 3 KAC SR15's |
|
|
|
|
Posted: 12/17/2007 9:50:03 PM EDT
[Last Edit: chromeluv]
[#1]
12.5 Noveske with URX/KAC M4QD Can:
  KAC 16inch Lilja with URX/KAC UM4QD Can Meopta 1-4x/NXS 3-15       |
|
|
|
|
Posted: 12/17/2007 9:54:58 PM EDT
[#2]
Very, very nice.
|
|
|
|
HI, USA
|
Posted: 12/17/2007 10:02:24 PM EDT
[#3]
That's hot!
|
|
|
TN, USA
|
Posted: 12/17/2007 10:04:49 PM EDT
[#4]
|
|
|
|
Posted: 12/17/2007 10:06:44 PM EDT
[#5]
Knight's SR-15 Match in .556 with Leupold Mk4 3.5x10 scope with Premier Reticles Gen 2 mil-dot that has a custom elevation cam for MK 262 ammo from 100-1000 yards. Dail in the elevation and shoot dead on. Shoots .5 MOA out to 300 yards with a steady hand. AC 
|
|
|
|
TX, USA
|
Posted: 12/17/2007 10:30:46 PM EDT
[#6]
That's probably the first SR15E3 sold to civie then or is it for T&E? So how does that TC looking trigger guard work? You put your middle finger on the front part I guess?
|
|
|
|
Posted: 12/17/2007 10:59:17 PM EDT
[Last Edit: GrumpyM4]
[#7]
Knights FF carbine forend, panels, and VFG.
 .
|
|
|
|
|
Posted: 12/17/2007 11:03:52 PM EDT
[#8]
very nice
|
|
|
|
|
Posted: 12/17/2007 11:08:11 PM EDT
[Last Edit: renesis]
[#9]
Can I please get a place holder for when I get my Mk18 clone finished.
ETA: Little bit of a teaser but I think I have settled on getting the Noveske N4 upper and having adco cut it to 10.5 for me... should make for a very unique build... wonder if it will be the first chopped N4? |
|
|
|
|
Posted: 12/17/2007 11:10:17 PM EDT
[#10]
I just installed at trigger guard on the gun the other day (thaks chromeluv!). I didnt notice that it felt any different than any of my other standard or Magpul trigger guards. KAC has a new trigger guard out too. You probably cant see it but its installed on the E3. Its a lot like the Magpul in terms of its shape/angle of curve, but it has very different angles in many ways too. Chromeluv has one but he hasnt put it on any of his gun yet. Im trying to talk him out of it!! I cant tell you much about how the guy got the E3 shown, I didnt really ask. I shot it a little and it is as you might expect... pretty awesome. The muzzle brake is loud (not REALLY loud) but effective. The flip up front sight on the URX III is very cool! Haha, talk about low profile!!! How about no profile!) The trigger guard is pretty hot, it has flats on the sides and provides for another index point for your trigger finger. Not that I think thats really necesary, but unique and unobtrusive none-the-less. With the amount of built in sling points the KAC E3's will have (several in the lower and several more in the rail) KAC will put themselves out of the add on sling point business! Hahaha! Anyway, great pics eveyone, keep them coming. I'll have more tomorrow. |
||
|
|
|
Posted: 12/17/2007 11:13:12 PM EDT
[Last Edit: JC_]
[#11]
Nice -
ETA - contribution to come later |
|
|
|
|
Posted: 12/17/2007 11:18:40 PM EDT
[#12]
Here's a MK18 clone I built for a guy with a RAS, pannels and vert grip
|
|
|
|
|
Posted: 12/17/2007 11:19:00 PM EDT
[Last Edit: 1_AR_NEWBIE]
[#13]
I miss all the fun!!
I had to work last sunday so I missed the E3 rifle!! Oh, wait, I shot it three months ago!!  At the AAC shoot they had and yes it was badass!Mike EDIT: if I can get some URX tools I will have a rifle for this thread  |
|
|
|
|
Posted: 12/17/2007 11:27:28 PM EDT
[#14]
Oh, I forgot I had a pic of that! There you go brutha! 1_AR_Newbie shooting the E3 carbine with an NT4 can! Good times!
|
|
|
|
|
Posted: 12/17/2007 11:30:30 PM EDT
[#15]
I bought some of my very first duty gear from the shop upstairs at the old Knight's building. Secretary had to buzz you in after showing creds and then they had to round someone up to actually sell you something. Many, many moons ago.
|
|
|
|
|
Posted: 12/17/2007 11:32:22 PM EDT
[#16]
Droool!
Here's my lowly contribution of mods & stuff.  anti-swivel mod  PDW grips  SAS  Arty RAS   |
|
|
|
|
Posted: 12/17/2007 11:40:32 PM EDT
[#17]
For sale, one RAS... slightly used
 A guy who works with me and one of my very regular customers would kill for a PDW grip. I'll have to see if I cant track some down some how! |
|
|
|
|
Posted: 12/17/2007 11:42:13 PM EDT
[#18]
They're just A2s with some quality time on the belt sander...
|
|
|
|
|
Posted: 12/17/2007 11:44:14 PM EDT
[#19]
Did you grind them yourself?
|
|
|
|
|
Posted: 12/17/2007 11:59:13 PM EDT
[#20]
Yup!
(Don't have the inside connections yet like some people  )Anyone get their hands on a PDW brake yet? |
|
|
|
MO, USA
|
Posted: 12/18/2007 12:41:00 AM EDT
[Last Edit: SgtSauer]
[#21]
Here are my two contributions:
RRA Entry Tactical  KAC specific parts are: 1. KAC RIS with KAC panels 2. KAC foregrip 3. KAC 300 meter buis Bushmaster 20" with KAC M5 RAS  |
|
|
|
Posted: 12/18/2007 9:53:52 PM EDT
[#22]
That was SO freaking fun!!! Mike |
||
|
|
USA
|
Posted: 12/18/2007 10:03:25 PM EDT
[#23]
|
|
|
|
Posted: 12/18/2007 10:11:47 PM EDT
[#24]
Tag
|
|
|
|
USA
|
Posted: 12/18/2007 10:36:34 PM EDT
[#25]
I'll play
 Just a RAS 2 an foregrip. Wish the rifle was a Knight's. One day. |
|
|
|
Posted: 12/18/2007 11:17:23 PM EDT
[Last Edit: handyandy]
[#26]
New-arguy: Who makes the front sight in the very top picture? Is it KAC? I need to buy one. Thanks, Andy
|
|
|
|
|
Posted: 12/18/2007 11:37:18 PM EDT
[#27]
Yup, its KAC. Got to keep your eyes peeled to the EE. They are not for sale, but that doesn't mean they never show up for sale. If you find one, I hope that:
1) You want one bad because 2) You will need deep pockets I've seen them sell in exess of $400. |
|
|
|
|
Posted: 12/19/2007 2:44:32 AM EDT
[Last Edit: S-1]
[#28]
LMT 10.5" upper & Lower
KAC M4QD NT-4 & KAC RAS w/ panels+grip   
|
|
|
|
|
Posted: 12/19/2007 3:48:25 AM EDT
[#29]
I NEED one of those KAC flip up front sights for a SAM-R build.
KAC RIS on top and RAS on bottom.  |
|
|
|
MI, USA
|
Posted: 12/19/2007 7:37:56 AM EDT
[#30]
I have the big KAC knife, along with several other KAC goodies. Well made knife. Does anyone else have any of the knives? I don't see them very often.
|
|
|
|
Posted: 12/19/2007 9:15:42 AM EDT
[#31]
No but I have been trying to find one as well. I saw some online and emailed the company just a week or so ago, but I never did hear back. |
||
|
|
|
Posted: 12/19/2007 9:18:43 AM EDT
[#32]
She's a beauty... |
||
|
|
FIN
|
Posted: 12/19/2007 10:31:03 AM EDT
[Last Edit: M4A2_L073754]
[#33]
Here´s my contribution to thread.
Bushmaster SBR  Bushmaster M4gery  Recon rifle  Recon II  SPR  M16A4gery  ETA: fixed the links |
|
|
|
Posted: 12/19/2007 11:34:18 AM EDT
[#34]
Red X's |
||
|
|
USA
|
Posted: 12/19/2007 5:26:34 PM EDT
[#35]
     Dimpled under the rail...  |
|
|
|
Posted: 12/19/2007 5:30:13 PM EDT
[#36]
Is this using the KAC bipod mount? Or something else?
|
|
|
|
MD, USA
|
Posted: 12/19/2007 5:47:27 PM EDT
[#37]
That is a sick rifle. I love it. I need to get off the carbine kick and trick out my 20". |
|
|
|
|
Posted: 12/19/2007 6:27:23 PM EDT
[Last Edit: Duffy]
[#38]
One lousy pic is all I can post for now, need to take some newer and better pics later
 But there are 6 KAC parts on that rifle alone
|
|
|
|
|
Posted: 12/19/2007 6:43:38 PM EDT
[#39]
 
|
|
|
|
|
Posted: 12/19/2007 7:15:32 PM EDT
[#40]
The bottom of many KAC rails, including the URX on that one, have threaded holes. There are threaded sling studs that screw into those holes. Thats how the bipod on that gun is being mounted. |
||
|
|
|
Posted: 12/19/2007 7:18:44 PM EDT
[#41]
Here's one of my older M4's with a RAS II, KAC Aimpoint mount, 3 different KAC sling mounts and 300m.
|
|
|
|
CT, USA
|
Posted: 12/19/2007 7:22:15 PM EDT
[#42]
After a year I finally found something to do with my KAC GB. 10.5" Noveske SS/CL in VIS w/ KAC 300m buis
  SR25 with SASS rail. Now has FDE M110 scope mount   SR25K with SR25 URX  KAC lower, bolt, rail and iron sights on my MK12 mod 1ish rifle   KAC lower MK12 mod 0ish rifle  Stock KAC SR15 M5 with PRS and LMT M203  Stock KAC SR15 M4  Have two URXs inbound for the SR15s. Also, one KAC SOCOM can for my MK23 Wes is building me my first MSTN upper with a URX as well. Unfortunately, with my state's AWB, I'll probably never get a chance to own a new SR15 E3.  |
|
|
|
Posted: 12/19/2007 7:26:43 PM EDT
[#43]
conndjc, SWEET! If you ever think you want to sell some of those KAC lowers, keep me in mind!
My A4 clone  My knock around gun 
|
|
|
|
|
Posted: 12/19/2007 9:11:29 PM EDT
[#44]
Thank you. |
|||
|
|
CT, USA
|
Posted: 12/19/2007 9:43:26 PM EDT
[#45]
Ooops. Forgot the suppressed HK G3 with KAC rail.
 |
|
|
|
Posted: 12/19/2007 9:59:48 PM EDT
[#46]
Oh yeah, forgot to add: To all of you guys with those KAC flip up gas blocks... I think I sincerely hate everyone of you...
|
|
|
|
FL, USA
|
Posted: 12/20/2007 12:15:13 PM EDT
[#47]
|
||
|
|
NC, USA
|
Posted: 12/20/2007 12:32:25 PM EDT
[#48]
There are some very nice rifles in here.
Here is one of mine pimpin some KAC parts 
|
|
|
|
Posted: 12/20/2007 8:16:07 PM EDT
[#49]
finally filled in my place holder.
|
|
|
|
|
Posted: 12/21/2007 1:28:16 AM EDT
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
