Bobro Engineering designs and produces small arms related equipment featuring advanced mechanical engineering. All engineering and prototype processes are performed in house at Bobro's state of the art manufacturing facility. Bobro Engineering utilizes full CNC machinery and possesses metal coating and finishing equipment.
Bobro Aimpoint Comp M4 Mount
$129.95
Bobro Precision Optic 1" Mount
$199.95
•Low
•Standard
Bobro Precision Optic 1" Mount
$209.95
•Low
•Extended
Bobro Precision Optic 1" Mount
$209.95
•Low
•Slightly Forward
Bobro Precision Optic 30mm Mount
$209.95
•Low
•Extended
Bobro Precision Optic 30mm Mount
$199.95
•Low
•Standard
Bobro Single Cantilever 30mm Mount
$129.95
The Aimpoint Cantilever - 150 mount provides an absolute co-witness when mounted on the AR15/M16 weapon platform. It features the patent pending BLAC™lever system which requires no manual adjustment to attain a proper, rock solid engagement on a 1913 Picatinny rail.
Bobro Single Cantilever 30mm Mount
$149.95
The Aimpoint Cantilever - 180 mount provides a lower 1/3rd co-witness when mounted on the AR15/M16 weapon platform. It features the patent pending BLAC lever system which requires no manual adjustment to attain a proper, rock solid engagement on a 1913 Picatinny rail.
Bobro Trijicon Acog Mount
$129.95
Bobro Vertical Grip
$74.95
•Short
The FGA SACL portion is machined from a polymer (Delrin). The fasteners and index pin are phosphated to Mil Spec STD 171. The FGA was not designed for the waterproof storage of articles, but items can be stowed inside the central core. The FGA’s primary mission is to be used as a front grip, and not to store batteries etc. The FGA was designed for rapid on/off with a solid interface that could withstand the massive heat generated by modern small arms. The aluminum rail interface eliminates the compression set and subsequent loosening problems associated with a plastic coupling. The FGA is not rail sensitive, meaning that the FGA can be installed on any rail within specification (Mil-Std 1913).
Bobro Vertical Grip
$74.95
•Standard
The FGA SACL portion is machined from a polymer (Delrin). The fasteners and index pin are phosphated to Mil Spec STD 171. The FGA was not designed for the waterproof storage of articles, but items can be stowed inside the central core. The FGA’s primary mission is to be used as a front grip, and not to store batteries etc. The FGA was designed for rapid on/off with a solid interface that could withstand the massive heat generated by modern small arms. The aluminum rail interface eliminates the compression set and subsequent loosening problems associated with a plastic coupling. The FGA is not rail sensitive, meaning that the FGA can be installed on any rail within specification (Mil-Std 1913).