Site Notices
Author
Message
SlowAnthony
Offline
Posts: 7
Feedback: 0% (0)
Posted: 2/13/2012 6:51:27 PM
So, I ordered my MPC from WW and finally got a chance to send about 70 rounds thru it.

Loaded the magazine, Pulled the Charge handle back / released it, aimed and "CLICK"....nothing.

Dropped the magazine, pulled the charge handle and the round fell out. The round was struck but was a Failure to Fire. Figured it was that particular bullet and it did it about 3 - 4 more times. I examined everything and all seemed fine.

I was then able to get about 20 thru it.

Then the problem started again. I even traded ammo with a buddy there. It was just as if the slide was not "strong" enough to chamber the round all the way....

I have no clue but was not overly impressed on the first outing....
WW-TechSupport
Member
Offline
Posts: 76
Feedback: 0% (0)
Link To This Post
Posted: 2/14/2012 7:16:11 AM
[Last Edit: 2/14/2012 7:46:40 AM by WW-TechSupport]
Slowanthony,

Sorry for your problems. When you get a chance call customer service at 1-855-808-1888 and send the rifle back to us. I will take a look at it here at the factory and get it straightened out for you. I can turn it around very quickly and get it right back to you the day it comes in.
Normally I would suggest trying different ammo but it appears you have done that. What ammos were you firing?

-Erik
SlowAnthony
Offline
Posts: 8
Feedback: 0% (0)
Link To This Post
Posted: 2/14/2012 4:02:36 PM
Originally Posted By WW-TechSupport:
Slowanthony,

Sorry for your problems. When you get a chance call customer service at 1-855-808-1888 and send the rifle back to us. I will take a look at it here at the factory and get it straightened out for you. I can turn it around very quickly and get it right back to you the day it comes in.
Normally I would suggest trying different ammo but it appears you have done that. What ammos were you firing?

-Erik


Do I pay for the shipping to / from?
SONYtec
Offline
Posts: 556
Feedback: 0% (0)
Link To This Post
Posted: 2/15/2012 12:02:43 AM
Did you try cleaning the chamber, bolt, and firing pin???

What ammo were you using???
WW-TechSupport
Member
Offline
Posts: 78
Feedback: 0% (0)
Link To This Post
Posted: 2/15/2012 7:16:34 AM
Originally Posted By SlowAnthony:
Originally Posted By WW-TechSupport:
Slowanthony,

Sorry for your problems. When you get a chance call customer service at 1-855-808-1888 and send the rifle back to us. I will take a look at it here at the factory and get it straightened out for you. I can turn it around very quickly and get it right back to you the day it comes in.
Normally I would suggest trying different ammo but it appears you have done that. What ammos were you firing?

-Erik


Do I pay for the shipping to / from?


If the rifle is defective we will cover the shipping both ways