|
|
Posted: 10/13/2011 11:46:32 AM
Hi,
I was building up my first grendel and have several bolt carriers to use. Is it safe to use a JP enterpises lightweight BCG? Just curious. I would be running just the hornady ammo to begin with.... Best, Daniel |
|
|
|
|
Posted: 10/13/2011 1:59:41 PM
I'd stick with the standard BCG.
|
|
|
|
|
Posted: 10/13/2011 2:43:48 PM
thanks, when i bought it from jp they said the same thing about not using it for 6.8....
but i was wondering since i got the catalog from aa with the order if they use a lightweight bolt carrier in their 5ish pound 6.5 grendel....i guess they dont. i think it is pretty hard to get an ar really light. I bought a busmaster all carbon rifle they listed it as 4.5 lbs and it was actually 5.5 lbs. I put in the jp lightweight carrier and saved 6 ounces, which is about what you save with carbon uppers and lower versus aluminum. |
|
|
|
|
Posted: 10/13/2011 5:14:15 PM
Originally Posted By smokey27:
thanks, when i bought it from jp they said the same thing about not using it for 6.8.... but i was wondering since i got the catalog from aa with the order if they use a lightweight bolt carrier in their 5ish pound 6.5 grendel....i guess they dont. i think it is pretty hard to get an ar really light. I bought a busmaster all carbon rifle they listed it as 4.5 lbs and it was actually 5.5 lbs. I put in the jp lightweight carrier and saved 6 ounces, which is about what you save with carbon uppers and lower versus aluminum. Usually the lighter BCG are for special applications. Then change the timing of your bolt opening just as a heavier bolt group will, but both opposite results of one another. Bolt beat certain areas of the rifle. I use to run a carrier weight but they beat the BCG and the barrel extension. |
|
|
|
|
Posted: 10/15/2011 12:03:21 AM
Run the heaviest bolt carrier you can find, along with a heavy buffer and an upgraded spring. You will get the best accuracy that way. You want the rifle to be dropping cartridges about 5 to 6 feet from your position standing, so adjust the weight, spring rate, and gas flow accordingly.
|
|