Battle Arms Development
- Joined Dec 2001
- Posts 415
-
EE 100% (16)
NV, USA
|
Posted: 1/13/2016 4:20:37 PM EDT
[#3]
Quote History Originally Posted By Snootchie_Bootchies:Good to hear. Being busy is a double-edged sword -- good that you have the business and customers, bad that we have to wait . Regarding your emphasis on the tube being a pistol tube, how would the pistol tube be different than the existing tube? I don't see why a special tube would be needed, based on what I see in the picture. Granted, you have the product nearby or in front of you and I'm using a picture. But is there something I'm missing? It looks like the tube is separate from the stock mount. Therefore, the tube, spring and buffer would be all that's necessary and the stock, stock mount and screws could be sold separately if/when a customer gets an SBR stamp. All you would need is a ring to replace where the stock mounted to make sure the spacing was correct. Thoughts? View Quote View All Quotes View All Quotes Quote History Originally Posted By Snootchie_Bootchies:Originally Posted By wdigeorge:Originally Posted By Snootchie_Bootchies:Good Afternoon, I'm looking to roll a new AR Pistol and am looking for a PDW length (read: short) buffer tube setup for it. There are few options available and I saw your ad for the Vert cycle through when surfing GD this morning. Have you put any thoughts into selling just the necessary pieces from the vert stock system for an AR Pistol? From this picture on your site, it looks like just the tube, spring and buffer are needed. What would just those pieces cost as a stand-alone package? Vert PDW Stock yes we have. The buffer system for the (o)VERT PDW Stock System will be made available separately with a PISTOL buffer tube. We probably won't have time to go to that for a few months as we are extremely back logged at the moment. Good to hear. Being busy is a double-edged sword -- good that you have the business and customers, bad that we have to wait . Regarding your emphasis on the tube being a pistol tube, how would the pistol tube be different than the existing tube? I don't see why a special tube would be needed, based on what I see in the picture. Granted, you have the product nearby or in front of you and I'm using a picture. But is there something I'm missing? It looks like the tube is separate from the stock mount. Therefore, the tube, spring and buffer would be all that's necessary and the stock, stock mount and screws could be sold separately if/when a customer gets an SBR stamp. All you would need is a ring to replace where the stock mounted to make sure the spacing was correct. Thoughts? We have to modify the existing buffer tube shoulder area so it will mate up directly to the rear of the lower receiver. As is right now the buffer tube is pushing against the stock housing to hold it in place. We can't simply remove the stock mechanism and install the buffer tube as there would be no housing/stop.
|
President, Battle Arms Development, Inc. www.BattleArmsDevelopment.com
|